From: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
To: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@codeaurora.org>,
brcm80211-dev-list@cypress.com,
brcm80211-dev-list.pdl@broadcom.com,
arend.vanspriel@broadcom.com, franky.lin@broadcom.com,
hante.meuleman@broadcom.com,
Wright Feng <Wright.Feng@cypress.com>,
Stanley Hsu <Stanley.Hsu@cypress.com>
Subject: [PATCH] brcmfmac: Add sg parameters dts parsing
Date: Fri, 1 Dec 2017 01:55:50 -0600 [thread overview]
Message-ID: <20171201075542.GA31376@aremote07.aus.cypress.com> (raw)
broken_sg_support, sd_head_align, and sd_sgentry_align are used in
brcmfmac code but not configurable in dts file. Add the parsing logic.
Now they can be configured like below in dts:
brcm,broken_sg_support;
brcm,sd_head_align = /bits/ 16 <4>;
brcm,sd_sgentry_align = /bits/ 16 <4>;
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index aee6e59..023f8ea 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -30,14 +30,22 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
struct device_node *np = dev->of_node;
int irq;
u32 irqf;
- u32 val;
+ u32 val32;
+ u16 val16;
if (!np || bus_type != BRCMF_BUSTYPE_SDIO ||
!of_device_is_compatible(np, "brcm,bcm4329-fmac"))
return;
- if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
- sdio->drive_strength = val;
+ if (of_property_read_u32(np, "brcm,drive-strength", &val32) == 0)
+ sdio->drive_strength = val32;
+
+ sdio->broken_sg_support = of_property_read_bool(np,
+ "brcm,broken_sg_support");
+ if (of_property_read_u16(np, "brcm,sd_head_align", &val16) == 0)
+ sdio->sd_head_align = val16;
+ if (of_property_read_u16(np, "brcm,sd_sgentry_align", &val16) == 0)
+ sdio->sd_sgentry_align = val16;
/* make sure there are interrupts defined in the node */
if (!of_find_property(np, "interrupts", NULL))
--
2.1.0
next reply other threads:[~2017-12-01 7:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-01 7:55 Chi-Hsien Lin [this message]
2017-12-01 8:38 ` [PATCH] brcmfmac: Add sg parameters dts parsing Arend van Spriel
2017-12-02 14:45 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171201075542.GA31376@aremote07.aus.cypress.com \
--to=chi-hsien.lin@cypress.com \
--cc=Stanley.Hsu@cypress.com \
--cc=Wright.Feng@cypress.com \
--cc=arend.vanspriel@broadcom.com \
--cc=brcm80211-dev-list.pdl@broadcom.com \
--cc=brcm80211-dev-list@cypress.com \
--cc=franky.lin@broadcom.com \
--cc=hante.meuleman@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).