Linux-Wireless Archive on lore.kernel.org
 help / Atom feed
* [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string
@ 2019-01-11 16:18 Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 3/7] nfc: pn533: Add dev_up/dev_down hooks to phy_ops Lars Poeschel
                   ` (5 more replies)
  0 siblings, 6 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-01-11 16:18 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, GitAuthor: Lars Poeschel,
	linux-wireless, linux-kernel
  Cc: Johan Hovold

It is favourable to have one unified compatible string for devices that
have multiple interfaces. So this adds simply "pn532" as the devicetree
binding compatible string and makes a note that the old ones are
deprecated.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
Changes in v3:
- This patch is new in v3

 drivers/nfc/pn533/i2c.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c
index 4389eb4c8d0b..f4eae9dd5305 100644
--- a/drivers/nfc/pn533/i2c.c
+++ b/drivers/nfc/pn533/i2c.c
@@ -258,6 +258,11 @@ static int pn533_i2c_remove(struct i2c_client *client)
 }
 
 static const struct of_device_id of_pn533_i2c_match[] = {
+	{ .compatible = "nxp,pn532", },
+	/*
+	 * NOTE: The use of the compatibles with the trailing "...-i2c" is
+	 * deprecated and will be removed.
+	 */
 	{ .compatible = "nxp,pn533-i2c", },
 	{ .compatible = "nxp,pn532-i2c", },
 	{},
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 3/7] nfc: pn533: Add dev_up/dev_down hooks to phy_ops
  2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
@ 2019-01-11 16:18 ` Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 4/7] nfc: pn533: Split pn533 init & nfc_register Lars Poeschel
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-01-11 16:18 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, GitAuthor: Lars Poeschel,
	linux-wireless, linux-kernel
  Cc: Johan Hovold

This adds hooks for dev_up and dev_down to the phy_ops. They are
optional.
The idea is to inform the phy driver when the nfc chip is really going
to be used. When it is not used, the phy driver can suspend it's
interface to the nfc chip to save some power. The nfc chip is considered
not in use before dev_up and after dev_down.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
Changes in v5:
- (dev->phy_ops->dev_up) instead (dev->phy_ops)

Changes in v4:
- This patch is new in v4

 drivers/nfc/pn533/pn533.c | 12 +++++++++++-
 drivers/nfc/pn533/pn533.h |  9 +++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index a0cc1cc45292..1bc097d03789 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -2468,6 +2468,9 @@ static int pn533_dev_up(struct nfc_dev *nfc_dev)
 {
 	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
 
+	if (dev->phy_ops->dev_up)
+		dev->phy_ops->dev_up(dev);
+
 	if (dev->device_type == PN533_DEVICE_PN532) {
 		int rc = pn532_sam_configuration(nfc_dev);
 
@@ -2480,7 +2483,14 @@ static int pn533_dev_up(struct nfc_dev *nfc_dev)
 
 static int pn533_dev_down(struct nfc_dev *nfc_dev)
 {
-	return pn533_rf_field(nfc_dev, 0);
+	struct pn533 *dev = nfc_get_drvdata(nfc_dev);
+	int ret;
+
+	ret = pn533_rf_field(nfc_dev, 0);
+	if (dev->phy_ops->dev_down && !ret)
+		dev->phy_ops->dev_down(dev);
+
+	return ret;
 }
 
 static struct nfc_ops pn533_nfc_ops = {
diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h
index 88d569666c51..eb5ccefc32e5 100644
--- a/drivers/nfc/pn533/pn533.h
+++ b/drivers/nfc/pn533/pn533.h
@@ -219,6 +219,15 @@ struct pn533_phy_ops {
 			  struct sk_buff *out);
 	int (*send_ack)(struct pn533 *dev, gfp_t flags);
 	void (*abort_cmd)(struct pn533 *priv, gfp_t flags);
+	/*
+	 * dev_up and dev_down are optional.
+	 * They are used to inform the phy layer that the nfc chip
+	 * is going to be really used very soon. The phy layer can then
+	 * bring up it's interface to the chip and have it suspended for power
+	 * saving reasons otherwise.
+	 */
+	void (*dev_up)(struct pn533 *priv);
+	void (*dev_down)(struct pn533 *priv);
 };
 
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 4/7] nfc: pn533: Split pn533 init & nfc_register
  2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 3/7] nfc: pn533: Add dev_up/dev_down hooks to phy_ops Lars Poeschel
@ 2019-01-11 16:18 ` Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 5/7] nfc: pn533: add UART phy driver Lars Poeschel
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-01-11 16:18 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, GitAuthor: Lars Poeschel,
	Greg Kroah-Hartman, Johan Hovold, Hans de Goede, linux-wireless,
	linux-kernel

There is a problem in the initialisation and setup of the pn533: It
registers with nfc too early. It could happen, that it finished
registering with nfc and someone starts using it. But setup of the pn533
is not yet finished. Bad or at least unintended things could happen.
So I split out nfc registering (and unregistering) to seperate functions
that have to be called late in probe then.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
Changes in v5:
- This patch is new in v5

 drivers/nfc/pn533/i2c.c   | 17 +++++-----
 drivers/nfc/pn533/pn533.c | 66 ++++++++++++++++++++-------------------
 drivers/nfc/pn533/pn533.h | 11 ++++---
 drivers/nfc/pn533/usb.c   | 12 +++++--
 4 files changed, 59 insertions(+), 47 deletions(-)

diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c
index f4eae9dd5305..9907fc3525f2 100644
--- a/drivers/nfc/pn533/i2c.c
+++ b/drivers/nfc/pn533/i2c.c
@@ -206,12 +206,10 @@ static int pn533_i2c_probe(struct i2c_client *client,
 	phy->i2c_dev = client;
 	i2c_set_clientdata(client, phy);
 
-	priv = pn533_register_device(PN533_DEVICE_PN532,
-				     PN533_NO_TYPE_B_PROTOCOLS,
+	priv = pn53x_common_init(PN533_DEVICE_PN532,
 				     PN533_PROTO_REQ_ACK_RESP,
 				     phy, &i2c_phy_ops, NULL,
-				     &phy->i2c_dev->dev,
-				     &client->dev);
+				     &phy->i2c_dev->dev);
 
 	if (IS_ERR(priv)) {
 		r = PTR_ERR(priv);
@@ -233,13 +231,17 @@ static int pn533_i2c_probe(struct i2c_client *client,
 	if (r)
 		goto fn_setup_err;
 
-	return 0;
+	r = pn53x_register_nfc(priv, PN533_NO_TYPE_B_PROTOCOLS, &client->dev);
+	if (r)
+		goto fn_setup_err;
+
+	return r;
 
 fn_setup_err:
 	free_irq(client->irq, phy);
 
 irq_rqst_err:
-	pn533_unregister_device(phy->priv);
+	pn53x_common_clean(phy->priv);
 
 	return r;
 }
@@ -252,7 +254,8 @@ static int pn533_i2c_remove(struct i2c_client *client)
 
 	free_irq(client->irq, phy);
 
-	pn533_unregister_device(phy->priv);
+	pn53x_unregister_nfc(phy->priv);
+	pn53x_common_clean(phy->priv);
 
 	return 0;
 }
diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index 1bc097d03789..3689f0502f6a 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -2600,14 +2600,12 @@ int pn533_finalize_setup(struct pn533 *dev)
 }
 EXPORT_SYMBOL_GPL(pn533_finalize_setup);
 
-struct pn533 *pn533_register_device(u32 device_type,
-				u32 protocols,
+struct pn533 *pn53x_common_init(u32 device_type,
 				enum pn533_protocol_type protocol_type,
 				void *phy,
 				struct pn533_phy_ops *phy_ops,
 				struct pn533_frame_ops *fops,
-				struct device *dev,
-				struct device *parent)
+				struct device *dev)
 {
 	struct pn533 *priv;
 	int rc = -ENOMEM;
@@ -2648,43 +2646,18 @@ struct pn533 *pn533_register_device(u32 device_type,
 	skb_queue_head_init(&priv->fragment_skb);
 
 	INIT_LIST_HEAD(&priv->cmd_queue);
-
-	priv->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
-					   priv->ops->tx_header_len +
-					   PN533_CMD_DATAEXCH_HEAD_LEN,
-					   priv->ops->tx_tail_len);
-	if (!priv->nfc_dev) {
-		rc = -ENOMEM;
-		goto destroy_wq;
-	}
-
-	nfc_set_parent_dev(priv->nfc_dev, parent);
-	nfc_set_drvdata(priv->nfc_dev, priv);
-
-	rc = nfc_register_device(priv->nfc_dev);
-	if (rc)
-		goto free_nfc_dev;
-
 	return priv;
 
-free_nfc_dev:
-	nfc_free_device(priv->nfc_dev);
-
-destroy_wq:
-	destroy_workqueue(priv->wq);
 error:
 	kfree(priv);
 	return ERR_PTR(rc);
 }
-EXPORT_SYMBOL_GPL(pn533_register_device);
+EXPORT_SYMBOL_GPL(pn53x_common_init);
 
-void pn533_unregister_device(struct pn533 *priv)
+void pn53x_common_clean(struct pn533 *priv)
 {
 	struct pn533_cmd *cmd, *n;
 
-	nfc_unregister_device(priv->nfc_dev);
-	nfc_free_device(priv->nfc_dev);
-
 	flush_delayed_work(&priv->poll_work);
 	destroy_workqueue(priv->wq);
 
@@ -2699,8 +2672,37 @@ void pn533_unregister_device(struct pn533 *priv)
 
 	kfree(priv);
 }
-EXPORT_SYMBOL_GPL(pn533_unregister_device);
+EXPORT_SYMBOL_GPL(pn53x_common_clean);
+
+int pn53x_register_nfc(struct pn533 *priv, u32 protocols,
+			struct device *parent)
+{
+	int rc = -ENOMEM;
+
+	priv->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
+					   priv->ops->tx_header_len +
+					   PN533_CMD_DATAEXCH_HEAD_LEN,
+					   priv->ops->tx_tail_len);
+	if (!priv->nfc_dev)
+		return -ENOMEM;
+
+	nfc_set_parent_dev(priv->nfc_dev, parent);
+	nfc_set_drvdata(priv->nfc_dev, priv);
+
+	rc = nfc_register_device(priv->nfc_dev);
+	if (rc)
+		nfc_free_device(priv->nfc_dev);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pn53x_register_nfc);
 
+void pn53x_unregister_nfc(struct pn533 *priv)
+{
+	nfc_unregister_device(priv->nfc_dev);
+	nfc_free_device(priv->nfc_dev);
+}
+EXPORT_SYMBOL_GPL(pn53x_unregister_nfc);
 
 MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>");
 MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>");
diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h
index eb5ccefc32e5..39909d099309 100644
--- a/drivers/nfc/pn533/pn533.h
+++ b/drivers/nfc/pn533/pn533.h
@@ -231,18 +231,19 @@ struct pn533_phy_ops {
 };
 
 
-struct pn533 *pn533_register_device(u32 device_type,
-				u32 protocols,
+struct pn533 *pn53x_common_init(u32 device_type,
 				enum pn533_protocol_type protocol_type,
 				void *phy,
 				struct pn533_phy_ops *phy_ops,
 				struct pn533_frame_ops *fops,
-				struct device *dev,
-				struct device *parent);
+				struct device *dev);
 
 int pn533_finalize_setup(struct pn533 *dev);
-void pn533_unregister_device(struct pn533 *priv);
+void pn53x_common_clean(struct pn533 *priv);
 void pn533_recv_frame(struct pn533 *dev, struct sk_buff *skb, int status);
+int pn53x_register_nfc(struct pn533 *priv, u32 protocols,
+			struct device *parent);
+void pn53x_unregister_nfc(struct pn533 *priv);
 
 bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame);
 bool pn533_rx_frame_is_ack(void *_frame);
diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c
index 5d823e965883..0f8e1dc3fbf1 100644
--- a/drivers/nfc/pn533/usb.c
+++ b/drivers/nfc/pn533/usb.c
@@ -546,9 +546,9 @@ static int pn533_usb_probe(struct usb_interface *interface,
 		goto error;
 	}
 
-	priv = pn533_register_device(id->driver_info, protocols, protocol_type,
+	priv = pn53x_common_init(id->driver_info, protocol_type,
 					phy, &usb_phy_ops, fops,
-					&phy->udev->dev, &interface->dev);
+					&phy->udev->dev);
 
 	if (IS_ERR(priv)) {
 		rc = PTR_ERR(priv);
@@ -562,9 +562,14 @@ static int pn533_usb_probe(struct usb_interface *interface,
 		goto error;
 
 	usb_set_intfdata(interface, phy);
+	rc = pn53x_register_nfc(priv, protocols, &interface->dev);
+	if (rc)
+		goto err_clean;
 
 	return 0;
 
+err_clean:
+	pn53x_common_clean(priv);
 error:
 	usb_free_urb(phy->in_urb);
 	usb_free_urb(phy->out_urb);
@@ -582,7 +587,8 @@ static void pn533_usb_disconnect(struct usb_interface *interface)
 	if (!phy)
 		return;
 
-	pn533_unregister_device(phy->priv);
+	pn53x_unregister_nfc(phy->priv);
+	pn53x_common_clean(phy->priv);
 
 	usb_set_intfdata(interface, NULL);
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 5/7] nfc: pn533: add UART phy driver
  2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 3/7] nfc: pn533: Add dev_up/dev_down hooks to phy_ops Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 4/7] nfc: pn533: Split pn533 init & nfc_register Lars Poeschel
@ 2019-01-11 16:18 ` Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 6/7] nfc: pn533: Add autopoll capability Lars Poeschel
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-01-11 16:18 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, GitAuthor: Lars Poeschel, linux-kernel,
	linux-wireless
  Cc: Johan Hovold

This adds the UART phy interface for the pn533 driver.
The pn533 driver can be used through UART interface this way.
It is implemented as a serdev device.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
Changes in v5:
- Use the splitted pn53x_common_init and pn53x_register_nfc
  and pn53x_common_clean and pn53x_unregister_nfc alike

Changes in v4:
- SPDX-License-Identifier: GPL-2.0+
- Source code comments above refering items
- Error check for serdev_device_write's
- Change if (xxx == NULL) to if (!xxx)
- Remove device name from a dev_err
- move pn533_register in _probe a bit towards the end of _probe
- make use of newly added dev_up / dev_down phy_ops
- control send_wakeup variable from dev_up / dev_down

Changes in v3:
- depend on SERIAL_DEV_BUS in Kconfig

Changes in v2:
- switched from tty line discipline to serdev, resulting in many
  simplifications
- SPDX License Identifier

 drivers/nfc/pn533/Kconfig  |  11 ++
 drivers/nfc/pn533/Makefile |   2 +
 drivers/nfc/pn533/pn533.h  |   8 +
 drivers/nfc/pn533/uart.c   | 316 +++++++++++++++++++++++++++++++++++++
 4 files changed, 337 insertions(+)
 create mode 100644 drivers/nfc/pn533/uart.c

diff --git a/drivers/nfc/pn533/Kconfig b/drivers/nfc/pn533/Kconfig
index d94122dd30e4..29df7d97d209 100644
--- a/drivers/nfc/pn533/Kconfig
+++ b/drivers/nfc/pn533/Kconfig
@@ -25,3 +25,14 @@ config NFC_PN533_I2C
 
 	  If you choose to build a module, it'll be called pn533_i2c.
 	  Say N if unsure.
+
+config NFC_PN532_UART
+	tristate "NFC PN532 device support (UART)"
+	depends on SERIAL_DEV_BUS
+	select NFC_PN533
+	---help---
+	  This module adds support for the NXP pn532 UART interface.
+	  Select this if your platform is using the UART bus.
+
+	  If you choose to build a module, it'll be called pn532_uart.
+	  Say N if unsure.
diff --git a/drivers/nfc/pn533/Makefile b/drivers/nfc/pn533/Makefile
index 51d24c622fcb..bdfd6860d5e4 100644
--- a/drivers/nfc/pn533/Makefile
+++ b/drivers/nfc/pn533/Makefile
@@ -3,7 +3,9 @@
 #
 pn533_usb-objs  = usb.o
 pn533_i2c-objs  = i2c.o
+pn532_uart-objs  = uart.o
 
 obj-$(CONFIG_NFC_PN533)     += pn533.o
 obj-$(CONFIG_NFC_PN533_USB) += pn533_usb.o
 obj-$(CONFIG_NFC_PN533_I2C) += pn533_i2c.o
+obj-$(CONFIG_NFC_PN532_UART) += pn532_uart.o
diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h
index 39909d099309..1e54fc6c524f 100644
--- a/drivers/nfc/pn533/pn533.h
+++ b/drivers/nfc/pn533/pn533.h
@@ -55,6 +55,11 @@
 
 /* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */
 #define PN533_STD_FRAME_ACK_SIZE 6
+/*
+ * Preamble (1), SoPC (2), Packet Length (1), Packet Length Checksum (1),
+ * Specific Application Level Error Code (1) , Postamble (1)
+ */
+#define PN533_STD_ERROR_FRAME_SIZE 8
 #define PN533_STD_FRAME_CHECKSUM(f) (f->data[f->datalen])
 #define PN533_STD_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1])
 /* Half start code (3), LEN (4) should be 0xffff for extended frame */
@@ -96,6 +101,9 @@
 #define PN533_CMD_MI_MASK 0x40
 #define PN533_CMD_RET_SUCCESS 0x00
 
+#define PN533_FRAME_DATALEN_ACK 0x00
+#define PN533_FRAME_DATALEN_ERROR 0x01
+#define PN533_FRAME_DATALEN_EXTENDED 0xFF
 
 enum  pn533_protocol_type {
 	PN533_PROTO_REQ_ACK_RESP = 0,
diff --git a/drivers/nfc/pn533/uart.c b/drivers/nfc/pn533/uart.c
new file mode 100644
index 000000000000..78ef464bfa7b
--- /dev/null
+++ b/drivers/nfc/pn533/uart.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for NXP PN532 NFC Chip - UART transport layer
+ *
+ * Copyright (C) 2018 Lemonage Software GmbH
+ * Author: Lars Pöschel <poeschel@lemonage.de>
+ * All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
+#include "pn533.h"
+
+#define PN532_UART_SKB_BUFF_LEN	(PN533_CMD_DATAEXCH_DATA_MAXLEN * 2)
+
+enum send_wakeup {
+	PN532_SEND_NO_WAKEUP = 0,
+	PN532_SEND_WAKEUP,
+	PN532_SEND_LAST_WAKEUP,
+};
+
+
+struct pn532_uart_phy {
+	struct serdev_device *serdev;
+	struct sk_buff *recv_skb;
+	struct pn533 *priv;
+	enum send_wakeup send_wakeup;
+	struct timer_list cmd_timeout;
+	struct sk_buff *cur_out_buf;
+};
+
+static int pn532_uart_send_frame(struct pn533 *dev,
+				struct sk_buff *out)
+{
+	/* wakeup sequence and dummy bytes for waiting time */
+	static const u8 wakeup[] = {
+		0x55, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+	struct pn532_uart_phy *pn532 = dev->phy;
+	int err;
+
+	print_hex_dump_debug("PN532_uart TX: ", DUMP_PREFIX_NONE, 16, 1,
+			     out->data, out->len, false);
+
+	pn532->cur_out_buf = out;
+	if (pn532->send_wakeup) {
+		err= serdev_device_write(pn532->serdev,
+				wakeup, sizeof(wakeup),
+				MAX_SCHEDULE_TIMEOUT);
+		if (err < 0)
+			return err;
+	}
+
+	if (pn532->send_wakeup == PN532_SEND_LAST_WAKEUP) {
+		pn532->send_wakeup = PN532_SEND_NO_WAKEUP;
+	}
+
+	err = serdev_device_write(pn532->serdev, out->data, out->len,
+			MAX_SCHEDULE_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	mod_timer(&pn532->cmd_timeout, HZ / 40 + jiffies);
+	return 0;
+}
+
+static int pn532_uart_send_ack(struct pn533 *dev, gfp_t flags)
+{
+	struct pn532_uart_phy *pn532 = dev->phy;
+	/* spec 7.1.1.3:  Preamble, SoPC (2), ACK Code (2), Postamble */
+	static const u8 ack[PN533_STD_FRAME_ACK_SIZE] = {
+			0x00, 0x00, 0xff, 0x00, 0xff, 0x00};
+	int err;
+
+	err = serdev_device_write(pn532->serdev, ack, sizeof(ack),
+			MAX_SCHEDULE_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static void pn532_uart_abort_cmd(struct pn533 *dev, gfp_t flags)
+{
+	/* An ack will cancel the last issued command */
+	pn532_uart_send_ack(dev, flags);
+	/* schedule cmd_complete_work to finish current command execution */
+	pn533_recv_frame(dev, NULL, -ENOENT);
+}
+
+static void pn532_dev_up(struct pn533 *dev)
+{
+	struct pn532_uart_phy *pn532 = dev->phy;
+
+	serdev_device_open(pn532->serdev);
+	pn532->send_wakeup = PN532_SEND_LAST_WAKEUP;
+}
+
+static void pn532_dev_down(struct pn533 *dev)
+{
+	struct pn532_uart_phy *pn532 = dev->phy;
+
+	serdev_device_close(pn532->serdev);
+	pn532->send_wakeup = PN532_SEND_WAKEUP;
+}
+
+static struct pn533_phy_ops uart_phy_ops = {
+	.send_frame = pn532_uart_send_frame,
+	.send_ack = pn532_uart_send_ack,
+	.abort_cmd = pn532_uart_abort_cmd,
+	.dev_up = pn532_dev_up,
+	.dev_down = pn532_dev_down,
+};
+
+static void pn532_cmd_timeout(struct timer_list *t)
+{
+	struct pn532_uart_phy *dev = from_timer(dev, t, cmd_timeout);
+
+	pn532_uart_send_frame(dev->priv, dev->cur_out_buf);
+}
+
+/*
+ * scans the buffer if it contains a pn532 frame. It is not checked if the
+ * frame is really valid. This is later done with pn533_rx_frame_is_valid.
+ * This is useful for malformed or errornous transmitted frames. Adjusts the
+ * bufferposition where the frame starts, since pn533_recv_frame expects a
+ * well formed frame.
+ */
+static int pn532_uart_rx_is_frame(struct sk_buff *skb)
+{
+	int i;
+	u16 frame_len;
+	struct pn533_std_frame *std;
+	struct pn533_ext_frame *ext;
+
+	for (i = 0; i + PN533_STD_FRAME_ACK_SIZE <= skb->len; i++) {
+		std = (struct pn533_std_frame *)&skb->data[i];
+		/* search start code */
+		if (std->start_frame != cpu_to_be16(PN533_STD_FRAME_SOF))
+			continue;
+
+		/* frame type */
+		switch (std->datalen) {
+		case PN533_FRAME_DATALEN_ACK:
+			if (std->datalen_checksum == 0xff) {
+				skb_pull(skb, i);
+				return 1;
+			}
+
+			break;
+		case PN533_FRAME_DATALEN_ERROR:
+			if ((std->datalen_checksum == 0xff) &&
+					(skb->len >=
+					 PN533_STD_ERROR_FRAME_SIZE)) {
+				skb_pull(skb, i);
+				return 1;
+			}
+
+			break;
+		case PN533_FRAME_DATALEN_EXTENDED:
+			ext = (struct pn533_ext_frame *)&skb->data[i];
+			frame_len = ext->datalen;
+			if (skb->len >= frame_len +
+					sizeof(struct pn533_ext_frame) +
+					2 /* CKS + Postamble */) {
+				skb_pull(skb, i);
+				return 1;
+			}
+
+			break;
+		default: /* normal information frame */
+			frame_len = std->datalen;
+			if (skb->len >= frame_len +
+					sizeof(struct pn533_std_frame) +
+					2 /* CKS + Postamble */) {
+				skb_pull(skb, i);
+				return 1;
+			}
+
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int pn532_receive_buf(struct serdev_device *serdev,
+		const unsigned char *data, size_t count)
+{
+	struct pn532_uart_phy *dev = serdev_device_get_drvdata(serdev);
+	size_t i;
+
+	del_timer(&dev->cmd_timeout);
+	for (i = 0; i < count; i++) {
+		skb_put_u8(dev->recv_skb, *data++);
+		if (!pn532_uart_rx_is_frame(dev->recv_skb))
+			continue;
+
+		pn533_recv_frame(dev->priv, dev->recv_skb, 0);
+		dev->recv_skb = alloc_skb(PN532_UART_SKB_BUFF_LEN, GFP_KERNEL);
+		if (!dev->recv_skb)
+			return 0;
+	}
+
+	return i;
+}
+
+static struct serdev_device_ops pn532_serdev_ops = {
+	.receive_buf = pn532_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static const struct of_device_id pn532_uart_of_match[] = {
+	{ .compatible = "nxp,pn532", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pn532_uart_of_match);
+
+static int pn532_uart_probe(struct serdev_device *serdev)
+{
+	struct pn532_uart_phy *pn532;
+	struct pn533 *priv;
+	int err;
+
+	err = -ENOMEM;
+	pn532 = kzalloc(sizeof(*pn532), GFP_KERNEL);
+	if (!pn532)
+		goto err_exit;
+
+	pn532->recv_skb = alloc_skb(PN532_UART_SKB_BUFF_LEN, GFP_KERNEL);
+	if (!pn532->recv_skb)
+		goto err_free;
+
+	pn532->serdev = serdev;
+	serdev_device_set_drvdata(serdev, pn532);
+	serdev_device_set_client_ops(serdev, &pn532_serdev_ops);
+	err = serdev_device_open(serdev);
+	if (err) {
+		dev_err(&serdev->dev, "Unable to open device\n");
+		goto err_skb;
+	}
+
+	err = serdev_device_set_baudrate(serdev, 115200);
+	if (err != 115200) {
+		err = -EINVAL;
+		goto err_serdev;
+	}
+
+	serdev_device_set_flow_control(serdev, false);
+	pn532->send_wakeup = PN532_SEND_WAKEUP;
+	timer_setup(&pn532->cmd_timeout, pn532_cmd_timeout, 0);
+	priv = pn53x_common_init(PN533_DEVICE_PN532,
+				     PN533_PROTO_REQ_ACK_RESP,
+				     pn532, &uart_phy_ops, NULL,
+				     &pn532->serdev->dev);
+	if (IS_ERR(priv)) {
+		err = PTR_ERR(priv);
+		goto err_serdev;
+	}
+
+	pn532->priv = priv;
+	err = pn533_finalize_setup(pn532->priv);
+	if (err)
+		goto err_clean;
+
+	serdev_device_close(serdev);
+	err = pn53x_register_nfc(priv, PN533_NO_TYPE_B_PROTOCOLS, &serdev->dev);
+	if (err) {
+		pn53x_common_clean(pn532->priv);
+		goto err_skb;
+	}
+
+	return err;
+
+err_clean:
+	pn53x_common_clean(pn532->priv);
+err_serdev:
+	serdev_device_close(serdev);
+err_skb:
+	kfree_skb(pn532->recv_skb);
+err_free:
+	kfree(pn532);
+err_exit:
+	return err;
+}
+
+static void pn532_uart_remove(struct serdev_device *serdev)
+{
+	struct pn532_uart_phy *pn532 = serdev_device_get_drvdata(serdev);
+
+	pn53x_unregister_nfc(pn532->priv);
+	serdev_device_close(serdev);
+	pn53x_common_clean(pn532->priv);
+	kfree_skb(pn532->recv_skb);
+	kfree(pn532);
+}
+
+static struct serdev_device_driver pn532_uart_driver = {
+	.probe = pn532_uart_probe,
+	.remove = pn532_uart_remove,
+	.driver = {
+		.name = "pn532_uart",
+		.of_match_table = of_match_ptr(pn532_uart_of_match),
+	},
+};
+
+module_serdev_device_driver(pn532_uart_driver);
+
+MODULE_AUTHOR("Lars Pöschel <poeschel@lemonage.de>");
+MODULE_DESCRIPTION("PN532 UART driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 6/7] nfc: pn533: Add autopoll capability
  2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
                   ` (2 preceding siblings ...)
  2019-01-11 16:18 ` [PATCH v5 5/7] nfc: pn533: add UART phy driver Lars Poeschel
@ 2019-01-11 16:18 ` Lars Poeschel
  2019-01-11 16:18 ` [PATCH v5 7/7] nfc: pn532_uart: Make use of pn532 autopoll Lars Poeschel
  2019-02-28 10:48 ` [PING] [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
  5 siblings, 0 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-01-11 16:18 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, GitAuthor: Lars Poeschel,
	linux-wireless, linux-kernel
  Cc: Johan Hovold

pn532 devices support an autopoll command, that lets the chip
automatically poll for selected nfc technologies instead of manually
looping through every single nfc technology the user is interested in.
This is faster and less cpu and bus intensive than manually polling.
This adds this autopoll capability to the pn533 driver.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
 drivers/nfc/pn533/pn533.c | 193 +++++++++++++++++++++++++++++++++++++-
 drivers/nfc/pn533/pn533.h |  10 +-
 2 files changed, 197 insertions(+), 6 deletions(-)

diff --git a/drivers/nfc/pn533/pn533.c b/drivers/nfc/pn533/pn533.c
index 3689f0502f6a..a8e127487ada 100644
--- a/drivers/nfc/pn533/pn533.c
+++ b/drivers/nfc/pn533/pn533.c
@@ -197,6 +197,32 @@ struct pn533_cmd_jump_dep_response {
 	u8 gt[];
 } __packed;
 
+struct pn532_autopoll_resp {
+	u8 type;
+	u8 ln;
+	u8 tg;
+	u8 tgdata[];
+} __packed;
+
+/* PN532_CMD_IN_AUTOPOLL */
+#define PN532_AUTOPOLL_POLLNR_INFINITE	0xff
+#define PN532_AUTOPOLL_PERIOD		0x03 /* in units of 150 ms */
+
+#define PN532_AUTOPOLL_TYPE_GENERIC_106		0x00
+#define PN532_AUTOPOLL_TYPE_GENERIC_212		0x01
+#define PN532_AUTOPOLL_TYPE_GENERIC_424		0x02
+#define PN532_AUTOPOLL_TYPE_JEWEL		0x04
+#define PN532_AUTOPOLL_TYPE_MIFARE		0x10
+#define PN532_AUTOPOLL_TYPE_FELICA212		0x11
+#define PN532_AUTOPOLL_TYPE_FELICA424		0x12
+#define PN532_AUTOPOLL_TYPE_ISOA		0x20
+#define PN532_AUTOPOLL_TYPE_ISOB		0x23
+#define PN532_AUTOPOLL_TYPE_DEP_PASSIVE_106	0x40
+#define PN532_AUTOPOLL_TYPE_DEP_PASSIVE_212	0x41
+#define PN532_AUTOPOLL_TYPE_DEP_PASSIVE_424	0x42
+#define PN532_AUTOPOLL_TYPE_DEP_ACTIVE_106	0x80
+#define PN532_AUTOPOLL_TYPE_DEP_ACTIVE_212	0x81
+#define PN532_AUTOPOLL_TYPE_DEP_ACTIVE_424	0x82
 
 /* PN533_TG_INIT_AS_TARGET */
 #define PN533_INIT_TARGET_PASSIVE 0x1
@@ -1401,6 +1427,101 @@ static int pn533_poll_dep(struct nfc_dev *nfc_dev)
 	return rc;
 }
 
+static int pn533_autopoll_complete(struct pn533 *dev, void *arg,
+			       struct sk_buff *resp)
+{
+	u8 nbtg;
+	int rc;
+	struct pn532_autopoll_resp *apr;
+	struct nfc_target nfc_tgt;
+
+	if (IS_ERR(resp)) {
+		rc = PTR_ERR(resp);
+
+		nfc_err(dev->dev, "%s  autopoll complete error %d\n",
+			__func__, rc);
+
+		if (rc == -ENOENT) {
+			if (dev->poll_mod_count != 0)
+				return rc;
+			goto stop_poll;
+		} else if (rc < 0) {
+			nfc_err(dev->dev,
+				"Error %d when running autopoll\n", rc);
+			goto stop_poll;
+		}
+	}
+
+	nbtg = resp->data[0];
+	if ((nbtg > 2) || (nbtg <= 0))
+		return -EAGAIN;
+
+	apr = (struct pn532_autopoll_resp *)&resp->data[1];
+	while (nbtg--) {
+		memset(&nfc_tgt, 0, sizeof(struct nfc_target));
+		switch (apr->type) {
+		case PN532_AUTOPOLL_TYPE_ISOA:
+			dev_dbg(dev->dev, "ISOA");
+			rc = pn533_target_found_type_a(&nfc_tgt, apr->tgdata,
+						       apr->ln - 1);
+			break;
+		case PN532_AUTOPOLL_TYPE_FELICA212:
+		case PN532_AUTOPOLL_TYPE_FELICA424:
+			dev_dbg(dev->dev, "FELICA");
+			rc = pn533_target_found_felica(&nfc_tgt, apr->tgdata,
+						       apr->ln - 1);
+			break;
+		case PN532_AUTOPOLL_TYPE_JEWEL:
+			dev_dbg(dev->dev, "JEWEL");
+			rc = pn533_target_found_jewel(&nfc_tgt, apr->tgdata,
+						      apr->ln - 1);
+			break;
+		case PN532_AUTOPOLL_TYPE_ISOB:
+			dev_dbg(dev->dev, "ISOB");
+			rc = pn533_target_found_type_b(&nfc_tgt, apr->tgdata,
+						       apr->ln - 1);
+			break;
+		case PN532_AUTOPOLL_TYPE_MIFARE:
+			dev_dbg(dev->dev, "Mifare");
+			rc = pn533_target_found_type_a(&nfc_tgt, apr->tgdata,
+						       apr->ln - 1);
+			break;
+		default:
+			nfc_err(dev->dev,
+				    "Unknown current poll modulation");
+			rc = -EPROTO;
+		}
+
+		if (rc)
+			goto done;
+
+		if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) {
+			nfc_err(dev->dev,
+				    "The Tg found doesn't have the desired protocol");
+			rc = -EAGAIN;
+			goto done;
+		}
+
+		dev->tgt_available_prots = nfc_tgt.supported_protocols;
+		apr = (struct pn532_autopoll_resp *)
+			(apr->tgdata + (apr->ln - 1));
+	}
+
+	pn533_poll_reset_mod_list(dev);
+	nfc_targets_found(dev->nfc_dev, &nfc_tgt, 1);
+
+done:
+	dev_kfree_skb(resp);
+	return rc;
+
+stop_poll:
+	nfc_err(dev->dev, "autopoll operation has been stopped\n");
+
+	pn533_poll_reset_mod_list(dev);
+	dev->poll_protocols = 0;
+	return rc;
+}
+
 static int pn533_poll_complete(struct pn533 *dev, void *arg,
 			       struct sk_buff *resp)
 {
@@ -1546,6 +1667,7 @@ static int pn533_start_poll(struct nfc_dev *nfc_dev,
 	struct pn533_poll_modulations *cur_mod;
 	u8 rand_mod;
 	int rc;
+	struct sk_buff *skb;
 
 	dev_dbg(dev->dev,
 		"%s: im protocols 0x%x tm protocols 0x%x\n",
@@ -1569,9 +1691,73 @@ static int pn533_start_poll(struct nfc_dev *nfc_dev,
 			tm_protocols = 0;
 	}
 
-	pn533_poll_create_mod_list(dev, im_protocols, tm_protocols);
 	dev->poll_protocols = im_protocols;
 	dev->listen_protocols = tm_protocols;
+	if (dev->device_type == PN533_DEVICE_PN532_AUTOPOLL) {
+		skb = pn533_alloc_skb(dev, 4 + 6);
+		if (!skb)
+			return -ENOMEM;
+
+		*((u8 *)skb_put(skb, sizeof(u8))) =
+			PN532_AUTOPOLL_POLLNR_INFINITE;
+		*((u8 *)skb_put(skb, sizeof(u8))) = PN532_AUTOPOLL_PERIOD;
+
+		if ((im_protocols & NFC_PROTO_MIFARE_MASK) &&
+				(im_protocols & NFC_PROTO_ISO14443_MASK) &&
+				(im_protocols & NFC_PROTO_NFC_DEP_MASK))
+			*((u8 *)skb_put(skb, sizeof(u8))) =
+				PN532_AUTOPOLL_TYPE_GENERIC_106;
+		else {
+			if (im_protocols & NFC_PROTO_MIFARE_MASK)
+				*((u8 *)skb_put(skb, sizeof(u8))) =
+					PN532_AUTOPOLL_TYPE_MIFARE;
+
+			if (im_protocols & NFC_PROTO_ISO14443_MASK)
+				*((u8 *)skb_put(skb, sizeof(u8))) =
+					PN532_AUTOPOLL_TYPE_ISOA;
+
+			if (im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+				*((u8 *)skb_put(skb, sizeof(u8))) =
+					PN532_AUTOPOLL_TYPE_DEP_PASSIVE_106;
+				*((u8 *)skb_put(skb, sizeof(u8))) =
+					PN532_AUTOPOLL_TYPE_DEP_PASSIVE_212;
+				*((u8 *)skb_put(skb, sizeof(u8))) =
+					PN532_AUTOPOLL_TYPE_DEP_PASSIVE_424;
+			}
+		}
+
+		if (im_protocols & NFC_PROTO_FELICA_MASK ||
+				im_protocols & NFC_PROTO_NFC_DEP_MASK) {
+			*((u8 *)skb_put(skb, sizeof(u8))) =
+				PN532_AUTOPOLL_TYPE_FELICA212;
+			*((u8 *)skb_put(skb, sizeof(u8))) =
+				PN532_AUTOPOLL_TYPE_FELICA424;
+		}
+
+		if (im_protocols & NFC_PROTO_JEWEL_MASK)
+			*((u8 *)skb_put(skb, sizeof(u8))) =
+				PN532_AUTOPOLL_TYPE_JEWEL;
+
+		if (im_protocols & NFC_PROTO_ISO14443_B_MASK)
+			*((u8 *)skb_put(skb, sizeof(u8))) =
+				PN532_AUTOPOLL_TYPE_ISOB;
+
+		if (tm_protocols)
+			*((u8 *)skb_put(skb, sizeof(u8))) =
+				PN532_AUTOPOLL_TYPE_DEP_ACTIVE_106;
+
+		rc = pn533_send_cmd_async(dev, PN533_CMD_IN_AUTOPOLL, skb,
+				pn533_autopoll_complete, NULL);
+
+		if (rc < 0)
+			dev_kfree_skb(skb);
+		else
+			dev->poll_mod_count++;
+
+		return rc;
+	}
+
+	pn533_poll_create_mod_list(dev, im_protocols, tm_protocols);
 
 	/* Do not always start polling from the same modulation */
 	get_random_bytes(&rand_mod, sizeof(rand_mod));
@@ -2471,7 +2657,8 @@ static int pn533_dev_up(struct nfc_dev *nfc_dev)
 	if (dev->phy_ops->dev_up)
 		dev->phy_ops->dev_up(dev);
 
-	if (dev->device_type == PN533_DEVICE_PN532) {
+	if ((dev->device_type == PN533_DEVICE_PN532) ||
+		(dev->device_type == PN533_DEVICE_PN532_AUTOPOLL)) {
 		int rc = pn532_sam_configuration(nfc_dev);
 
 		if (rc)
@@ -2518,6 +2705,7 @@ static int pn533_setup(struct pn533 *dev)
 	case PN533_DEVICE_PASORI:
 	case PN533_DEVICE_ACR122U:
 	case PN533_DEVICE_PN532:
+	case PN533_DEVICE_PN532_AUTOPOLL:
 		max_retries.mx_rty_atr = 0x2;
 		max_retries.mx_rty_psl = 0x1;
 		max_retries.mx_rty_passive_act =
@@ -2554,6 +2742,7 @@ static int pn533_setup(struct pn533 *dev)
 	switch (dev->device_type) {
 	case PN533_DEVICE_STD:
 	case PN533_DEVICE_PN532:
+	case PN533_DEVICE_PN532_AUTOPOLL:
 		break;
 
 	case PN533_DEVICE_PASORI:
diff --git a/drivers/nfc/pn533/pn533.h b/drivers/nfc/pn533/pn533.h
index 1e54fc6c524f..27398966a95d 100644
--- a/drivers/nfc/pn533/pn533.h
+++ b/drivers/nfc/pn533/pn533.h
@@ -18,10 +18,11 @@
  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
-#define PN533_DEVICE_STD     0x1
-#define PN533_DEVICE_PASORI  0x2
-#define PN533_DEVICE_ACR122U 0x3
-#define PN533_DEVICE_PN532   0x4
+#define PN533_DEVICE_STD		0x1
+#define PN533_DEVICE_PASORI		0x2
+#define PN533_DEVICE_ACR122U		0x3
+#define PN533_DEVICE_PN532		0x4
+#define PN533_DEVICE_PN532_AUTOPOLL	0x5
 
 #define PN533_ALL_PROTOCOLS (NFC_PROTO_JEWEL_MASK | NFC_PROTO_MIFARE_MASK |\
 			     NFC_PROTO_FELICA_MASK | NFC_PROTO_ISO14443_MASK |\
@@ -87,6 +88,7 @@
 #define PN533_CMD_IN_ATR 0x50
 #define PN533_CMD_IN_RELEASE 0x52
 #define PN533_CMD_IN_JUMP_FOR_DEP 0x56
+#define PN533_CMD_IN_AUTOPOLL 0x60
 
 #define PN533_CMD_TG_INIT_AS_TARGET 0x8c
 #define PN533_CMD_TG_GET_DATA 0x86
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v5 7/7] nfc: pn532_uart: Make use of pn532 autopoll
  2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
                   ` (3 preceding siblings ...)
  2019-01-11 16:18 ` [PATCH v5 6/7] nfc: pn533: Add autopoll capability Lars Poeschel
@ 2019-01-11 16:18 ` Lars Poeschel
  2019-02-28 10:48 ` [PING] [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
  5 siblings, 0 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-01-11 16:18 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, GitAuthor: Lars Poeschel,
	linux-wireless, linux-kernel
  Cc: Johan Hovold

This switches the pn532 UART phy driver from manually polling to the new
autopoll mechanism.

Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
---
 drivers/nfc/pn533/uart.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/pn533/uart.c b/drivers/nfc/pn533/uart.c
index 78ef464bfa7b..2f0fcc6d964a 100644
--- a/drivers/nfc/pn533/uart.c
+++ b/drivers/nfc/pn533/uart.c
@@ -254,7 +254,7 @@ static int pn532_uart_probe(struct serdev_device *serdev)
 	serdev_device_set_flow_control(serdev, false);
 	pn532->send_wakeup = PN532_SEND_WAKEUP;
 	timer_setup(&pn532->cmd_timeout, pn532_cmd_timeout, 0);
-	priv = pn53x_common_init(PN533_DEVICE_PN532,
+	priv = pn53x_common_init(PN533_DEVICE_PN532_AUTOPOLL,
 				     PN533_PROTO_REQ_ACK_RESP,
 				     pn532, &uart_phy_ops, NULL,
 				     &pn532->serdev->dev);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PING] [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string
  2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
                   ` (4 preceding siblings ...)
  2019-01-11 16:18 ` [PATCH v5 7/7] nfc: pn532_uart: Make use of pn532 autopoll Lars Poeschel
@ 2019-02-28 10:48 ` Lars Poeschel
  2019-04-03  9:47   ` [PING 2] " Lars Poeschel
  5 siblings, 1 reply; 8+ messages in thread
From: Lars Poeschel @ 2019-02-28 10:48 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, open list:NFC SUBSYSTEM, open list; +Cc: Johan Hovold

A gentle ping on this whole patch series.

Regards,
Lars

On Fri, Jan 11, 2019 at 05:18:04PM +0100, Lars Poeschel wrote:
> It is favourable to have one unified compatible string for devices that
> have multiple interfaces. So this adds simply "pn532" as the devicetree
> binding compatible string and makes a note that the old ones are
> deprecated.
> 
> Cc: Johan Hovold <johan@kernel.org>
> Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
> ---
> Changes in v3:
> - This patch is new in v3
> 
>  drivers/nfc/pn533/i2c.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c
> index 4389eb4c8d0b..f4eae9dd5305 100644
> --- a/drivers/nfc/pn533/i2c.c
> +++ b/drivers/nfc/pn533/i2c.c
> @@ -258,6 +258,11 @@ static int pn533_i2c_remove(struct i2c_client *client)
>  }
>  
>  static const struct of_device_id of_pn533_i2c_match[] = {
> +	{ .compatible = "nxp,pn532", },
> +	/*
> +	 * NOTE: The use of the compatibles with the trailing "...-i2c" is
> +	 * deprecated and will be removed.
> +	 */
>  	{ .compatible = "nxp,pn533-i2c", },
>  	{ .compatible = "nxp,pn532-i2c", },
>  	{},
> -- 
> 2.20.1
> 

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PING 2] [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string
  2019-02-28 10:48 ` [PING] [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
@ 2019-04-03  9:47   ` " Lars Poeschel
  0 siblings, 0 replies; 8+ messages in thread
From: Lars Poeschel @ 2019-04-03  9:47 UTC (permalink / raw)
  To: devicetree, Samuel Ortiz, open list:NFC SUBSYSTEM, open list; +Cc: Johan Hovold

Second Ping.

Regards,
Lars

On Thu, Feb 28, 2019 at 11:48:01AM +0100, Lars Poeschel wrote:
> A gentle ping on this whole patch series.
> 
> Regards,
> Lars
> 
> On Fri, Jan 11, 2019 at 05:18:04PM +0100, Lars Poeschel wrote:
> > It is favourable to have one unified compatible string for devices that
> > have multiple interfaces. So this adds simply "pn532" as the devicetree
> > binding compatible string and makes a note that the old ones are
> > deprecated.
> > 
> > Cc: Johan Hovold <johan@kernel.org>
> > Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
> > ---
> > Changes in v3:
> > - This patch is new in v3
> > 
> >  drivers/nfc/pn533/i2c.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/nfc/pn533/i2c.c b/drivers/nfc/pn533/i2c.c
> > index 4389eb4c8d0b..f4eae9dd5305 100644
> > --- a/drivers/nfc/pn533/i2c.c
> > +++ b/drivers/nfc/pn533/i2c.c
> > @@ -258,6 +258,11 @@ static int pn533_i2c_remove(struct i2c_client *client)
> >  }
> >  
> >  static const struct of_device_id of_pn533_i2c_match[] = {
> > +	{ .compatible = "nxp,pn532", },
> > +	/*
> > +	 * NOTE: The use of the compatibles with the trailing "...-i2c" is
> > +	 * deprecated and will be removed.
> > +	 */
> >  	{ .compatible = "nxp,pn533-i2c", },
> >  	{ .compatible = "nxp,pn532-i2c", },
> >  	{},
> > -- 
> > 2.20.1
> > 

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11 16:18 [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
2019-01-11 16:18 ` [PATCH v5 3/7] nfc: pn533: Add dev_up/dev_down hooks to phy_ops Lars Poeschel
2019-01-11 16:18 ` [PATCH v5 4/7] nfc: pn533: Split pn533 init & nfc_register Lars Poeschel
2019-01-11 16:18 ` [PATCH v5 5/7] nfc: pn533: add UART phy driver Lars Poeschel
2019-01-11 16:18 ` [PATCH v5 6/7] nfc: pn533: Add autopoll capability Lars Poeschel
2019-01-11 16:18 ` [PATCH v5 7/7] nfc: pn532_uart: Make use of pn532 autopoll Lars Poeschel
2019-02-28 10:48 ` [PING] [PATCH v5 1/7] nfc: pn533: i2c: "pn532" as dt compatible string Lars Poeschel
2019-04-03  9:47   ` [PING 2] " Lars Poeschel

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox