Re: [REGRESSION] hostapd 2.4..2.7 broken with 4.18+

[Russell King - ARM Linux admin <linux@armlinux.org.uk>]

On Mon, Jan 14, 2019 at 12:59:00PM +0100, Arend Van Spriel wrote:
> On 1/14/2019 12:49 PM, Arend Van Spriel wrote:
> > Could you try the compile and load test I suggested earlier. I will try
> > to replicate things over here as well.
> 
> Regarding that. Could you provide me the hostapd.conf you are using without
> any privacy sensitive stuff of course.

Distro is Debian Stretch.

Here's the hostapd config file:

interface=wlan0
bridge=br0
driver=nl80211
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
country_code=GB
ieee80211d=0
ieee80211h=0
#local_pwr_constraint=3
#spectrum_mgmt_required=1
hw_mode=g
channel=11
auth_algs=3
ignore_broadcast_ssid=0
wmm_enabled=1
uapsd_advertisement_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0

#ieee80211n=1
ht_capab=[HT20][DSSS_CCK-40]

ssid=xxxxxxxx
wpa=2
wpa_passphrase=xxxxxxxx
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP


-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up