linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matteo Croce <mcroce@redhat.com>
To: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>,
	Franky Lin <franky.lin@broadcom.com>,
	Hante Meuleman <hante.meuleman@broadcom.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S . Miller" <davem@davemloft.net>,
	Johannes Berg <johannes@sipsolutions.net>
Subject: [PATCH net-next] wireless: fix typos
Date: Mon, 21 Jan 2019 00:20:00 +0100	[thread overview]
Message-ID: <20190120232000.4940-1-mcroce@redhat.com> (raw)

Fix spelling mistakes in brcm80211 and cfg80211: "lenght" -> "length".
The typos are also in the special comment blocks which
translates to documentation.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h     | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h     | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c      | 2 +-
 include/net/cfg80211.h                                      | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
index dcf6e27cc16f..d8085ce579f4 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -36,7 +36,7 @@
 #define BRCMF_DCMD_MEDLEN	1536
 #define BRCMF_DCMD_MAXLEN	8192
 
-/* IOCTL from host to device are limited in lenght. A device can only handle
+/* IOCTL from host to device are limited in length. A device can only handle
  * ethernet frame size. This limitation is to be applied by protocol layer.
  */
 #define BRCMF_TX_IOCTL_MAX_MSG_SIZE	(ETH_FRAME_LEN+ETH_FCS_LEN)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index 14b948917a1a..cf1ddf988476 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -47,7 +47,7 @@ enum nvram_parser_state {
  * @state: current parser state.
  * @data: input buffer being parsed.
  * @nvram: output buffer with parse result.
- * @nvram_len: lenght of parse result.
+ * @nvram_len: length of parse result.
  * @line: current line.
  * @column: current column in line.
  * @pos: byte offset in input buffer.
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
index 816f80ea925b..31f3e8e83a21 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
@@ -266,7 +266,7 @@ struct brcmf_event {
  * @status: status information.
  * @reason: reason code.
  * @auth_type: authentication type.
- * @datalen: lenght of event data buffer.
+ * @datalen: length of event data buffer.
  * @addr: ether address.
  * @ifname: interface name.
  * @ifidx: interface index.
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index a4308c6e72d7..0b7d977510c8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -508,7 +508,7 @@ static void brcmf_usb_rx_complete(struct urb *urb)
 	skb = req->skb;
 	req->skb = NULL;
 
-	/* zero lenght packets indicate usb "failure". Do not refill */
+	/* zero length packets indicate usb "failure". Do not refill */
 	if (urb->status != 0 || !urb->actual_length) {
 		brcmu_pkt_buf_free_skb(skb);
 		brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e0c41eb1c860..237839210a36 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5568,7 +5568,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
  * @dev: network device
  * @macaddr: the MAC address of the new candidate
  * @ie: information elements advertised by the peer candidate
- * @ie_len: lenght of the information elements buffer
+ * @ie_len: length of the information elements buffer
  * @gfp: allocation flags
  *
  * This function notifies cfg80211 that the mesh peer candidate has been
-- 
2.20.1


             reply	other threads:[~2019-01-21  8:24 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-20 23:20 Matteo Croce [this message]
2019-01-21  5:19 ` [PATCH net-next] wireless: fix typos Kalle Valo
2019-01-29 12:49   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190120232000.4940-1-mcroce@redhat.com \
    --to=mcroce@redhat.com \
    --cc=arend.vanspriel@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=franky.lin@broadcom.com \
    --cc=hante.meuleman@broadcom.com \
    --cc=johannes@sipsolutions.net \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).