From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Naftali Goldstein <naftali.goldstein@intel.com>,
Luca Coelho <luciano.coelho@intel.com>,
Kalle Valo <kvalo@codeaurora.org>,
Sasha Levin <sashal@kernel.org>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 4.20 234/304] iwlwifi: mvm: fix setting HE ppe FW config
Date: Mon, 28 Jan 2019 10:42:31 -0500 [thread overview]
Message-ID: <20190128154341.47195-234-sashal@kernel.org> (raw)
In-Reply-To: <20190128154341.47195-1-sashal@kernel.org>
From: Naftali Goldstein <naftali.goldstein@intel.com>
[ Upstream commit 189b8d441b0f7825f0b4278851c52afaa0515ed2 ]
The FW expects to get the ppe value for each NSS-BW pair in the same
format as in the he phy capabilities IE, which means that a value of 0
implies ppe should be used for BPSK (mcs 0). If there are no PPE
thresholds in the IE, or if for some NSS-RU pair there's no threshold
set for it (this could happen because it's a variable-sized field), it
means no PPE should not be used for that pair, so the value sent to FW
should be 7 which corresponds to "none".
Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/intel/iwlwifi/fw/api/mac.h | 2 +-
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8 +++++++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
index 1dd23f846fb9..f3ccd7948340 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
@@ -442,7 +442,7 @@ struct iwl_he_backoff_conf {
* Support for Nss x BW (or RU) matrix:
* (0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
* Each entry contains 2 QAM thresholds for 8us and 16us:
- * 0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6/7=RES
+ * 0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
* i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
* QAM_tx < QAM_th1 --> PPE=0us
* QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 00f831d88366..5a42c617c54c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -2005,7 +2005,13 @@ static void iwl_mvm_cfg_he_sta(struct iwl_mvm *mvm,
if (sta->he_cap.he_cap_elem.mac_cap_info[4] & IEEE80211_HE_MAC_CAP4_BQR)
sta_ctxt_cmd.htc_flags |= cpu_to_le32(IWL_HE_HTC_BQR_SUPP);
- /* If PPE Thresholds exist, parse them into a FW-familiar format */
+ /*
+ * Initialize the PPE thresholds to "None" (7), as described in Table
+ * 9-262ac of 80211.ax/D3.0.
+ */
+ memset(&sta_ctxt_cmd.pkt_ext, 7, sizeof(sta_ctxt_cmd.pkt_ext));
+
+ /* If PPE Thresholds exist, parse them into a FW-familiar format. */
if (sta->he_cap.he_cap_elem.phy_cap_info[6] &
IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
u8 nss = (sta->he_cap.ppe_thres[0] &
--
2.19.1
next prev parent reply other threads:[~2019-01-28 17:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190128154341.47195-1-sashal@kernel.org>
2019-01-28 15:38 ` [PATCH AUTOSEL 4.20 015/304] wil6210: fix reset flow for Talyn-mb Sasha Levin
2019-01-28 15:38 ` [PATCH AUTOSEL 4.20 016/304] wil6210: fix memory leak in wil_find_tx_bcast_2 Sasha Levin
2019-01-28 15:38 ` [PATCH AUTOSEL 4.20 017/304] ath10k: assign 'n_cipher_suites' for WCN3990 Sasha Levin
2019-01-28 15:38 ` [PATCH AUTOSEL 4.20 018/304] ath9k: dynack: use authentication messages for 'late' ack Sasha Levin
2019-01-28 15:39 ` [PATCH AUTOSEL 4.20 041/304] iwlwifi: fw: do not set sgi bits for HE connection Sasha Levin
2019-01-28 15:40 ` [PATCH AUTOSEL 4.20 104/304] mt76x0: dfs: fix IBI_R11 configuration on non-radar channels Sasha Levin
2019-01-28 15:40 ` [PATCH AUTOSEL 4.20 105/304] mt76x0: use band parameter for LC calibration Sasha Levin
2019-01-28 15:40 ` [PATCH AUTOSEL 4.20 127/304] mac80211: fix deauth TX when we disconnect Sasha Levin
2019-01-28 15:42 ` [PATCH AUTOSEL 4.20 207/304] mac80211: Properly handle SKB with radiotap only Sasha Levin
2019-01-28 15:42 ` [PATCH AUTOSEL 4.20 223/304] mac80211: fix radiotap vendor presence bitmap handling Sasha Levin
2019-01-28 15:42 ` [PATCH AUTOSEL 4.20 229/304] cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan() Sasha Levin
2019-01-28 15:42 ` Sasha Levin [this message]
2019-01-28 15:42 ` [PATCH AUTOSEL 4.20 241/304] ath10k: fix kernel panic due to use after free Sasha Levin
2019-01-28 15:42 ` [PATCH AUTOSEL 4.20 242/304] ath10k: fix tx_stats memory leak Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190128154341.47195-234-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luciano.coelho@intel.com \
--cc=naftali.goldstein@intel.com \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).