From: Govind Singh <govinds@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Govind Singh <govinds@codeaurora.org>
Subject: [PATCH v3 1/3] ath10k: Enable bus layer suspend/resume for WCN3990
Date: Wed, 6 Feb 2019 17:44:31 +0530 [thread overview]
Message-ID: <20190206121433.11606-2-govinds@codeaurora.org> (raw)
In-Reply-To: <20190206121433.11606-1-govinds@codeaurora.org>
Register snoc bus layer suspend/resume PM ops and configure
the wakeup source(CE2) for the device.
Testing:
Tested on WCN3990 HW.
Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1.
Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/snoc.c | 45 ++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index dad7e1ce79c0..60e0f46cfdd9 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -30,6 +30,7 @@
#define ATH10K_SNOC_RX_POST_RETRY_MS 50
#define CE_POLL_PIPE 4
+#define ATH10K_SNOC_WAKE_IRQ 2
static char *const ce_name[] = {
"WLAN_CE_0",
@@ -1041,6 +1042,46 @@ static int ath10k_snoc_hif_power_up(struct ath10k *ar)
return ret;
}
+#ifdef CONFIG_PM
+static int ath10k_snoc_hif_suspend(struct ath10k *ar)
+{
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+ int ret;
+
+ if (!device_may_wakeup(ar->dev))
+ return -EPERM;
+
+ ret = enable_irq_wake(ar_snoc->ce_irqs[ATH10K_SNOC_WAKE_IRQ].irq_line);
+ if (ret) {
+ ath10k_err(ar, "failed to enable wakeup irq :%d\n", ret);
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc device suspended\n");
+
+ return ret;
+}
+
+static int ath10k_snoc_hif_resume(struct ath10k *ar)
+{
+ struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
+ int ret;
+
+ if (!device_may_wakeup(ar->dev))
+ return -EPERM;
+
+ ret = disable_irq_wake(ar_snoc->ce_irqs[ATH10K_SNOC_WAKE_IRQ].irq_line);
+ if (ret) {
+ ath10k_err(ar, "failed to disable wakeup irq: %d\n", ret);
+ return ret;
+ }
+
+ ath10k_dbg(ar, ATH10K_DBG_SNOC, "snoc device resumed\n");
+
+ return ret;
+}
+#endif
+
static const struct ath10k_hif_ops ath10k_snoc_hif_ops = {
.read32 = ath10k_snoc_read32,
.write32 = ath10k_snoc_write32,
@@ -1054,6 +1095,10 @@ static const struct ath10k_hif_ops ath10k_snoc_hif_ops = {
.send_complete_check = ath10k_snoc_hif_send_complete_check,
.get_free_queue_number = ath10k_snoc_hif_get_free_queue_number,
.get_target_info = ath10k_snoc_hif_get_target_info,
+#ifdef CONFIG_PM
+ .suspend = ath10k_snoc_hif_suspend,
+ .resume = ath10k_snoc_hif_resume,
+#endif
};
static const struct ath10k_bus_ops ath10k_snoc_bus_ops = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-02-06 12:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-06 12:14 [PATCH v3 0/3] Add support for suspend/resume and WOW for WCN3990 chipset Govind Singh
2019-02-06 12:14 ` Govind Singh [this message]
2019-02-11 16:30 ` [PATCH v3 1/3] ath10k: Enable bus layer suspend/resume for WCN3990 Kalle Valo
2019-02-06 12:14 ` [PATCH v3 2/3] ath10k: Disable interface pause wow config for integrated chipset Govind Singh
2019-02-07 16:01 ` Kalle Valo
2019-02-06 12:14 ` [PATCH v3 3/3] ath10k: Request credit report if flow control enabled on ep Govind Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190206121433.11606-2-govinds@codeaurora.org \
--to=govinds@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).