Linux-Wireless Archive on lore.kernel.org
 help / Atom feed
* [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter
@ 2019-02-06 11:28 Rafał Miłecki
  2019-02-06 11:28 ` [PATCH V3 2/2] brcmfmac: pass bus to the __brcmf_err() in pcie.c Rafał Miłecki
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Rafał Miłecki @ 2019-02-06 11:28 UTC (permalink / raw)
  To: Kalle Valo
  Cc: Arend van Spriel, linux-wireless, brcm80211-dev-list.pdl,
	brcm80211-dev-list, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

So far __brcmf_err() was using pr_err() which didn't allow identifying
device that was affected by an error. It's crucial for systems with more
than 1 device supported by brcmfmac (a common case for home routers).

This change allows passing struct brcmf_bus to the __brcmf_err(). That
struct has been agreed to be the most common one. It allows accessing
struct device easily & using dev_err() printing helper.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
V2: Add missing #include <linux/device.h>
V3: Add #include "bus.h" to fix CONFIG_BRCM_TRACING=y compilation error:
    error: dereferencing pointer to incomplete type 'struct brcmf_bus'
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/common.c    | 7 +++++--
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 8 +++++---
 .../wireless/broadcom/brcm80211/brcmfmac/tracepoint.c    | 9 +++++++--
 3 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 0ce1d8174e6d..c62009a06617 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -350,7 +350,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 }
 
 #ifndef CONFIG_BRCM_TRACING
-void __brcmf_err(const char *func, const char *fmt, ...)
+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...)
 {
 	struct va_format vaf;
 	va_list args;
@@ -359,7 +359,10 @@ void __brcmf_err(const char *func, const char *fmt, ...)
 
 	vaf.fmt = fmt;
 	vaf.va = &args;
-	pr_err("%s: %pV", func, &vaf);
+	if (bus)
+		dev_err(bus->dev, "%s: %pV", func, &vaf);
+	else
+		pr_err("%s: %pV", func, &vaf);
 
 	va_end(args);
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
index cfed0626bf5a..b499f90d94f6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
@@ -45,8 +45,10 @@
 #undef pr_fmt
 #define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
 
-__printf(2, 3)
-void __brcmf_err(const char *func, const char *fmt, ...);
+struct brcmf_bus;
+
+__printf(3, 4)
+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...);
 /* Macro for error messages. When debugging / tracing the driver all error
  * messages are important to us.
  */
@@ -55,7 +57,7 @@ void __brcmf_err(const char *func, const char *fmt, ...);
 		if (IS_ENABLED(CONFIG_BRCMDBG) ||			\
 		    IS_ENABLED(CONFIG_BRCM_TRACING) ||			\
 		    net_ratelimit())					\
-			__brcmf_err(__func__, fmt, ##__VA_ARGS__);	\
+			__brcmf_err(NULL, __func__, fmt, ##__VA_ARGS__);\
 	} while (0)
 
 #if defined(DEBUG) || defined(CONFIG_BRCM_TRACING)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
index fe6755944b7b..a5c271bff446 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c
@@ -14,14 +14,16 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+#include <linux/device.h>
 #include <linux/module.h> /* bug in tracepoint.h, it should include this */
 
 #ifndef __CHECKER__
 #define CREATE_TRACE_POINTS
+#include "bus.h"
 #include "tracepoint.h"
 #include "debug.h"
 
-void __brcmf_err(const char *func, const char *fmt, ...)
+void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...)
 {
 	struct va_format vaf = {
 		.fmt = fmt,
@@ -30,7 +32,10 @@ void __brcmf_err(const char *func, const char *fmt, ...)
 
 	va_start(args, fmt);
 	vaf.va = &args;
-	pr_err("%s: %pV", func, &vaf);
+	if (bus)
+		dev_err(bus->dev, "%s: %pV", func, &vaf);
+	else
+		pr_err("%s: %pV", func, &vaf);
 	trace_brcmf_err(func, &vaf);
 	va_end(args);
 }
-- 
2.20.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH V3 2/2] brcmfmac: pass bus to the __brcmf_err() in pcie.c
  2019-02-06 11:28 [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Rafał Miłecki
@ 2019-02-06 11:28 ` Rafał Miłecki
  2019-02-06 12:14 ` [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Kalle Valo
  2019-02-08 15:23 ` Kalle Valo
  2 siblings, 0 replies; 4+ messages in thread
From: Rafał Miłecki @ 2019-02-06 11:28 UTC (permalink / raw)
  To: Kalle Valo
  Cc: Arend van Spriel, linux-wireless, brcm80211-dev-list.pdl,
	brcm80211-dev-list, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

This enables dev_err() usage (instead of pr_err()) in the __brcmf_err().
It makes error messages more meaningful and is important for debugging
errors/bugs on systems with multiple brcmfmac supported devices.

All bus files should follow & get updated similarly (soon).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
V2: Modify pcie.c & not cfg80211.c. The later should use wiphy_err()
V3: Fix CONFIG_PM=y compliation errors:
    error: redeclaration of 'bus' with no linkage
---
 .../broadcom/brcm80211/brcmfmac/debug.h       |  2 +
 .../broadcom/brcm80211/brcmfmac/pcie.c        | 59 +++++++++++--------
 2 files changed, 38 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
index b499f90d94f6..c1f260718c8e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
@@ -52,6 +52,7 @@ void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...);
 /* Macro for error messages. When debugging / tracing the driver all error
  * messages are important to us.
  */
+#ifndef brcmf_err
 #define brcmf_err(fmt, ...)						\
 	do {								\
 		if (IS_ENABLED(CONFIG_BRCMDBG) ||			\
@@ -59,6 +60,7 @@ void __brcmf_err(struct brcmf_bus *bus, const char *func, const char *fmt, ...);
 		    net_ratelimit())					\
 			__brcmf_err(NULL, __func__, fmt, ##__VA_ARGS__);\
 	} while (0)
+#endif
 
 #if defined(DEBUG) || defined(CONFIG_BRCM_TRACING)
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 16d7dda965d8..8f68e30fa5fa 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -30,6 +30,15 @@
 #include <brcmu_wifi.h>
 #include <brcm_hw_ids.h>
 
+/* Custom brcmf_err() that takes bus arg and passes it further */
+#define brcmf_err(bus, fmt, ...)					\
+	do {								\
+		if (IS_ENABLED(CONFIG_BRCMDBG) ||			\
+		    IS_ENABLED(CONFIG_BRCM_TRACING) ||			\
+		    net_ratelimit())					\
+			__brcmf_err(bus, __func__, fmt, ##__VA_ARGS__);	\
+	} while (0)
+
 #include "debug.h"
 #include "bus.h"
 #include "commonring.h"
@@ -531,6 +540,7 @@ static void
 brcmf_pcie_select_core(struct brcmf_pciedev_info *devinfo, u16 coreid)
 {
 	const struct pci_dev *pdev = devinfo->pdev;
+	struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
 	struct brcmf_core *core;
 	u32 bar0_win;
 
@@ -548,7 +558,7 @@ brcmf_pcie_select_core(struct brcmf_pciedev_info *devinfo, u16 coreid)
 			}
 		}
 	} else {
-		brcmf_err("Unsupported core selected %x\n", coreid);
+		brcmf_err(bus, "Unsupported core selected %x\n", coreid);
 	}
 }
 
@@ -848,9 +858,8 @@ static irqreturn_t brcmf_pcie_isr_thread(int irq, void *arg)
 
 static int brcmf_pcie_request_irq(struct brcmf_pciedev_info *devinfo)
 {
-	struct pci_dev *pdev;
-
-	pdev = devinfo->pdev;
+	struct pci_dev *pdev = devinfo->pdev;
+	struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
 
 	brcmf_pcie_intr_disable(devinfo);
 
@@ -861,7 +870,7 @@ static int brcmf_pcie_request_irq(struct brcmf_pciedev_info *devinfo)
 				 brcmf_pcie_isr_thread, IRQF_SHARED,
 				 "brcmf_pcie_intr", devinfo)) {
 		pci_disable_msi(pdev);
-		brcmf_err("Failed to request IRQ %d\n", pdev->irq);
+		brcmf_err(bus, "Failed to request IRQ %d\n", pdev->irq);
 		return -EIO;
 	}
 	devinfo->irq_allocated = true;
@@ -871,15 +880,14 @@ static int brcmf_pcie_request_irq(struct brcmf_pciedev_info *devinfo)
 
 static void brcmf_pcie_release_irq(struct brcmf_pciedev_info *devinfo)
 {
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = devinfo->pdev;
+	struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
 	u32 status;
 	u32 count;
 
 	if (!devinfo->irq_allocated)
 		return;
 
-	pdev = devinfo->pdev;
-
 	brcmf_pcie_intr_disable(devinfo);
 	free_irq(pdev->irq, devinfo);
 	pci_disable_msi(pdev);
@@ -891,7 +899,7 @@ static void brcmf_pcie_release_irq(struct brcmf_pciedev_info *devinfo)
 		count++;
 	}
 	if (devinfo->in_irq)
-		brcmf_err("Still in IRQ (processing) !!!\n");
+		brcmf_err(bus, "Still in IRQ (processing) !!!\n");
 
 	status = brcmf_pcie_read_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT);
 	brcmf_pcie_write_reg32(devinfo, BRCMF_PCIE_PCIE2REG_MAILBOXINT, status);
@@ -1102,6 +1110,7 @@ static void brcmf_pcie_release_ringbuffers(struct brcmf_pciedev_info *devinfo)
 
 static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
 {
+	struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
 	struct brcmf_pcie_ringbuf *ring;
 	struct brcmf_pcie_ringbuf *rings;
 	u32 d2h_w_idx_ptr;
@@ -1254,7 +1263,7 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
 	return 0;
 
 fail:
-	brcmf_err("Allocating ring buffers failed\n");
+	brcmf_err(bus, "Allocating ring buffers failed\n");
 	brcmf_pcie_release_ringbuffers(devinfo);
 	return -ENOMEM;
 }
@@ -1277,6 +1286,7 @@ brcmf_pcie_release_scratchbuffers(struct brcmf_pciedev_info *devinfo)
 
 static int brcmf_pcie_init_scratchbuffers(struct brcmf_pciedev_info *devinfo)
 {
+	struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
 	u64 address;
 	u32 addr;
 
@@ -1316,7 +1326,7 @@ static int brcmf_pcie_init_scratchbuffers(struct brcmf_pciedev_info *devinfo)
 	return 0;
 
 fail:
-	brcmf_err("Allocating scratch buffers failed\n");
+	brcmf_err(bus, "Allocating scratch buffers failed\n");
 	brcmf_pcie_release_scratchbuffers(devinfo);
 	return -ENOMEM;
 }
@@ -1437,6 +1447,7 @@ static int
 brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
 			       u32 sharedram_addr)
 {
+	struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
 	struct brcmf_pcie_shared_info *shared;
 	u32 addr;
 
@@ -1448,7 +1459,8 @@ brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
 	brcmf_dbg(PCIE, "PCIe protocol version %d\n", shared->version);
 	if ((shared->version > BRCMF_PCIE_MAX_SHARED_VERSION) ||
 	    (shared->version < BRCMF_PCIE_MIN_SHARED_VERSION)) {
-		brcmf_err("Unsupported PCIE version %d\n", shared->version);
+		brcmf_err(bus, "Unsupported PCIE version %d\n",
+			  shared->version);
 		return -EINVAL;
 	}
 
@@ -1490,6 +1502,7 @@ static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo,
 					const struct firmware *fw, void *nvram,
 					u32 nvram_len)
 {
+	struct brcmf_bus *bus = dev_get_drvdata(&devinfo->pdev->dev);
 	u32 sharedram_addr;
 	u32 sharedram_addr_written;
 	u32 loop_counter;
@@ -1544,7 +1557,7 @@ static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo,
 		loop_counter--;
 	}
 	if (sharedram_addr == sharedram_addr_written) {
-		brcmf_err("FW failed to initialize\n");
+		brcmf_err(bus, "FW failed to initialize\n");
 		return -ENODEV;
 	}
 	brcmf_dbg(PCIE, "Shared RAM addr: 0x%08x\n", sharedram_addr);
@@ -1555,16 +1568,15 @@ static int brcmf_pcie_download_fw_nvram(struct brcmf_pciedev_info *devinfo,
 
 static int brcmf_pcie_get_resource(struct brcmf_pciedev_info *devinfo)
 {
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = devinfo->pdev;
+	struct brcmf_bus *bus = dev_get_drvdata(&pdev->dev);
 	int err;
 	phys_addr_t  bar0_addr, bar1_addr;
 	ulong bar1_size;
 
-	pdev = devinfo->pdev;
-
 	err = pci_enable_device(pdev);
 	if (err) {
-		brcmf_err("pci_enable_device failed err=%d\n", err);
+		brcmf_err(bus, "pci_enable_device failed err=%d\n", err);
 		return err;
 	}
 
@@ -1577,7 +1589,7 @@ static int brcmf_pcie_get_resource(struct brcmf_pciedev_info *devinfo)
 	/* read Bar-1 mapped memory range */
 	bar1_size = pci_resource_len(pdev, 2);
 	if ((bar1_size == 0) || (bar1_addr == 0)) {
-		brcmf_err("BAR1 Not enabled, device size=%ld, addr=%#016llx\n",
+		brcmf_err(bus, "BAR1 Not enabled, device size=%ld, addr=%#016llx\n",
 			  bar1_size, (unsigned long long)bar1_addr);
 		return -EINVAL;
 	}
@@ -1586,7 +1598,7 @@ static int brcmf_pcie_get_resource(struct brcmf_pciedev_info *devinfo)
 	devinfo->tcm = ioremap_nocache(bar1_addr, bar1_size);
 
 	if (!devinfo->regs || !devinfo->tcm) {
-		brcmf_err("ioremap() failed (%p,%p)\n", devinfo->regs,
+		brcmf_err(bus, "ioremap() failed (%p,%p)\n", devinfo->regs,
 			  devinfo->tcm);
 		return -EINVAL;
 	}
@@ -1873,7 +1885,7 @@ brcmf_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	kfree(bus->msgbuf);
 	kfree(bus);
 fail:
-	brcmf_err("failed %x:%x\n", pdev->vendor, pdev->device);
+	brcmf_err(NULL, "failed %x:%x\n", pdev->vendor, pdev->device);
 	brcmf_pcie_release_resource(devinfo);
 	if (devinfo->ci)
 		brcmf_chip_detach(devinfo->ci);
@@ -1947,7 +1959,7 @@ static int brcmf_pcie_pm_enter_D3(struct device *dev)
 	wait_event_timeout(devinfo->mbdata_resp_wait, devinfo->mbdata_completed,
 			   BRCMF_PCIE_MBDATA_TIMEOUT);
 	if (!devinfo->mbdata_completed) {
-		brcmf_err("Timeout on response for entering D3 substate\n");
+		brcmf_err(bus, "Timeout on response for entering D3 substate\n");
 		brcmf_bus_change_state(bus, BRCMF_BUS_UP);
 		return -EIO;
 	}
@@ -1993,7 +2005,7 @@ static int brcmf_pcie_pm_leave_D3(struct device *dev)
 
 	err = brcmf_pcie_probe(pdev, NULL);
 	if (err)
-		brcmf_err("probe after resume failed, err=%d\n", err);
+		brcmf_err(bus, "probe after resume failed, err=%d\n", err);
 
 	return err;
 }
@@ -2064,7 +2076,8 @@ void brcmf_pcie_register(void)
 	brcmf_dbg(PCIE, "Enter\n");
 	err = pci_register_driver(&brcmf_pciedrvr);
 	if (err)
-		brcmf_err("PCIE driver registration failed, err=%d\n", err);
+		brcmf_err(NULL, "PCIE driver registration failed, err=%d\n",
+			  err);
 }
 
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter
  2019-02-06 11:28 [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Rafał Miłecki
  2019-02-06 11:28 ` [PATCH V3 2/2] brcmfmac: pass bus to the __brcmf_err() in pcie.c Rafał Miłecki
@ 2019-02-06 12:14 ` Kalle Valo
  2019-02-08 15:23 ` Kalle Valo
  2 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2019-02-06 12:14 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: Arend van Spriel, linux-wireless, brcm80211-dev-list.pdl,
	brcm80211-dev-list, Rafał Miłecki

"Rafał Miłecki" <rafal.milecki@gmail.com> writes:

> From: Rafał Miłecki <rafal@milecki.pl>
>
> So far __brcmf_err() was using pr_err() which didn't allow identifying
> device that was affected by an error. It's crucial for systems with more
> than 1 device supported by brcmfmac (a common case for home routers).
>
> This change allows passing struct brcmf_bus to the __brcmf_err(). That
> struct has been agreed to be the most common one. It allows accessing
> struct device easily & using dev_err() printing helper.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
> ---
> V2: Add missing #include <linux/device.h>
> V3: Add #include "bus.h" to fix CONFIG_BRCM_TRACING=y compilation error:
>     error: dereferencing pointer to incomplete type 'struct brcmf_bus'

Thanks, this compiles for me now. I also pushed this to w-d-next pending
branch to get more build coverage from kbuild bot.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter
  2019-02-06 11:28 [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Rafał Miłecki
  2019-02-06 11:28 ` [PATCH V3 2/2] brcmfmac: pass bus to the __brcmf_err() in pcie.c Rafał Miłecki
  2019-02-06 12:14 ` [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Kalle Valo
@ 2019-02-08 15:23 ` Kalle Valo
  2 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2019-02-08 15:23 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: Arend van Spriel, linux-wireless, brcm80211-dev-list.pdl,
	brcm80211-dev-list, Rafał Miłecki

" wrote:

> From: Rafał Miłecki <rafal@milecki.pl>
> 
> So far __brcmf_err() was using pr_err() which didn't allow identifying
> device that was affected by an error. It's crucial for systems with more
> than 1 device supported by brcmfmac (a common case for home routers).
> 
> This change allows passing struct brcmf_bus to the __brcmf_err(). That
> struct has been agreed to be the most common one. It allows accessing
> struct device easily & using dev_err() printing helper.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>

2 patches applied to wireless-drivers-next.git, thanks.

5cc898fbcb35 brcmfmac: modify __brcmf_err() to take bus as a parameter
8602e62441ab brcmfmac: pass bus to the __brcmf_err() in pcie.c

-- 
https://patchwork.kernel.org/patch/10799163/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, back to index

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-06 11:28 [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Rafał Miłecki
2019-02-06 11:28 ` [PATCH V3 2/2] brcmfmac: pass bus to the __brcmf_err() in pcie.c Rafał Miłecki
2019-02-06 12:14 ` [PATCH V3 1/2] brcmfmac: modify __brcmf_err() to take bus as a parameter Kalle Valo
2019-02-08 15:23 ` Kalle Valo

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox