From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
To: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: linux-wireless@vger.kernel.org, Felix Fietkau <nbd@nbd.name>,
Ryder Lee <ryder.lee@mediatek.com>, Roy Luo <royluo@google.com>
Subject: Re: [RFC] mt76: fix tx hung regression on MT7630E
Date: Mon, 29 Jul 2019 16:02:41 +0200 [thread overview]
Message-ID: <20190729140241.GC4030@localhost.localdomain> (raw)
In-Reply-To: <20190729125351.GA3086@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 3146 bytes --]
> On Fri, Jul 26, 2019 at 02:10:56PM +0200, Stanislaw Gruszka wrote:
> > Since 41634aa8d6db ("mt76: only schedule txqs from the tx tasklet")
> > I can observe firmware hangs on MT7630E on station mode: tx stop
> > functioning after minor activity (rx keep working) and on module
> > unload device fail to stop with messages:
> >
> > [ 5446.141413] mt76x0e 0000:06:00.0: TX DMA did not stop
> > [ 5449.176764] mt76x0e 0000:06:00.0: TX DMA did not stop
> >
> > Loading module again results in failure to associate with AP.
> > Only machine power off / power on cycle can make device work again.
> >
> > I have no idea why the commit caused F/W hangs. Most likely some proper
> > fix is needed of changing registers programming (or assuring proper order
> > of actions), but so far I can not came up with any better fix than
> > a partial revert of 41634aa8d6db.
>
> The difference is that with 41634aa8d6db we can run mt76x02_poll_tx()
> and mt76x02_tx_tasklet() in parallel on 2 different CPUs. Without
> the commit, since tasklet is not scheduled from mt76_wake_tx_queue(),
> it does not happen.
>
> I'm not quite sure why, but MT7630E does not like when we poll tx status
> on 2 cpus at once. Change like below:
Hi Stanislaw,
have you tried to look at the commit: 6fe533378795f87
("mt76: mt76x02: remove irqsave/restore in locking for tx status fifo")?
Could it be a race between a registermap update and a stats load? (we are using a
different lock now)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
> index 467b28379870..622251faa415 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
> @@ -170,7 +170,7 @@ static int mt76x02_poll_tx(struct napi_struct *napi, int budget)
> mt76.tx_napi);
> int i;
>
> - mt76x02_mac_poll_tx_status(dev, false);
> + mt76x02_mac_poll_tx_status(dev, true);
I am not sure if we really need mt76x02_mac_poll_tx_status() here since we run
it in mt76x02_tx_complete_skb() and in mt76x02_tx_tasklet(). Anyway the only
difference doing so is we do not run mt76x02_send_tx_status().
Regards,
Lorenzo
>
> for (i = MT_TXQ_MCU; i >= 0; i--)
> mt76_queue_tx_cleanup(dev, i, false);
>
> is sufficient to avoid the hangs.
>
> > diff --git a/drivers/net/wireless/mediatek/mt76/tx.c b/drivers/net/wireless/mediatek/mt76/tx.c
> > index 5397827668b9..fefe0ee52584 100644
> > --- a/drivers/net/wireless/mediatek/mt76/tx.c
> > +++ b/drivers/net/wireless/mediatek/mt76/tx.c
> > @@ -598,7 +598,7 @@ void mt76_wake_tx_queue(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
> > if (!test_bit(MT76_STATE_RUNNING, &dev->state))
> > return;
> >
> > - tasklet_schedule(&dev->tx_tasklet);
> > + mt76_txq_schedule(dev, txq->ac);
>
> However I'm not sure if change to tasklet_schedule() is indeed correct,
> since on tasklet we schedule all queues, hence queues that could
> possibly be still blocked? And on mt76_wake_tx_queue() we schedule only
> one queue.
>
> Stanislaw
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2019-07-29 14:02 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-26 12:10 [RFC] mt76: fix tx hung regression on MT7630E Stanislaw Gruszka
2019-07-29 12:53 ` Stanislaw Gruszka
2019-07-29 14:02 ` Lorenzo Bianconi [this message]
2019-07-30 13:54 ` Stanislaw Gruszka
2019-07-30 14:55 ` Lorenzo Bianconi
2019-07-31 8:19 ` Stanislaw Gruszka
2019-07-31 8:51 ` Stanislaw Gruszka
2019-07-31 9:09 ` Lorenzo Bianconi
2019-08-05 10:01 ` Stanislaw Gruszka
2019-08-05 11:27 ` Lorenzo Bianconi
2019-08-05 12:39 ` Stanislaw Gruszka
2019-08-12 11:50 ` Stanislaw Gruszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190729140241.GC4030@localhost.localdomain \
--to=lorenzo.bianconi@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=nbd@nbd.name \
--cc=royluo@google.com \
--cc=ryder.lee@mediatek.com \
--cc=sgruszka@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).