Linux-Wireless Archive on
 help / color / Atom feed
From: Emil Karlson <>
To: Stanislaw Gruszka <>
Cc: Kalle Valo <>,
Subject: Re: Ap mode regression in linux-5.3-rc1 in rt2800usb
Date: Fri, 16 Aug 2019 11:00:12 +0300
Message-ID: <20190816110012.63982001@lettuce> (raw)
In-Reply-To: <>


On Wed, 14 Aug 2019 10:50:19 +0200
Stanislaw Gruszka <> wrote:

> (cc linux-wireless mailing list)
> On Tue, Aug 13, 2019 at 09:50:00PM +0300, Emil Karlson wrote:
> > Greetings
> > 
> > After upgrading my ap running rt2800usb to linux-5.3-rc1 I noticed
> > an unusual problem of not being able to connect to my ap with my
> > android devices (nexus7/flo and nexus5x/bullhead), from tcpdump it
> > seemed ap was receiving packets from the android devices after
> > successful association, but android devices were not seeing the
> > dhcp replies.
> > 
> > I reverted drivers/net/wireless/ralink to the state it is in v5.2.8
> > and android clients can connect again normally. I did not
> > explicitly set watchdog parameter to any value.

> Most suspicious are 710e6cc1595e and 41a531ffa4c5 .

It seems to me that reverting only
allows all my android devices to successfully connect to the internet.

Best Regards

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190813215000.6cc27ade@lettuce>
2019-08-14  8:50 ` Stanislaw Gruszka
2019-08-16  8:00   ` Emil Karlson [this message]
2019-08-16  9:33     ` Stanislaw Gruszka
2019-08-19  6:06       ` Emil Karlson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190816110012.63982001@lettuce \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on

Archives are clonable:
	git clone --mirror linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ \
	public-inbox-index linux-wireless

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox