Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
From: Lubomir Rintel <lkundrak@v3.sk>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: libertas-dev@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH] libertas: use mesh_wdev->ssid instead of priv->mesh_ssid
Date: Sat,  7 Sep 2019 17:18:55 +0200
Message-ID: <20190907151855.2637984-1-lkundrak@v3.sk> (raw)

With the commit e86dc1ca4676 ("Libertas: cfg80211 support") we've lost
the ability to actually set the Mesh SSID from userspace.
NL80211_CMD_SET_INTERFACE with NL80211_ATTR_MESH_ID sets the mesh point
interface's ssid field. Let's use that one for the Libertas Mesh
operation

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/net/wireless/marvell/libertas/dev.h  |  2 --
 drivers/net/wireless/marvell/libertas/mesh.c | 31 +++++++++++++-------
 drivers/net/wireless/marvell/libertas/mesh.h |  3 +-
 3 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/marvell/libertas/dev.h b/drivers/net/wireless/marvell/libertas/dev.h
index 4691349300265..4b6e05a8e5d54 100644
--- a/drivers/net/wireless/marvell/libertas/dev.h
+++ b/drivers/net/wireless/marvell/libertas/dev.h
@@ -58,8 +58,6 @@ struct lbs_private {
 #ifdef CONFIG_LIBERTAS_MESH
 	struct lbs_mesh_stats mstats;
 	uint16_t mesh_tlv;
-	u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1];
-	u8 mesh_ssid_len;
 	u8 mesh_channel;
 #endif
 
diff --git a/drivers/net/wireless/marvell/libertas/mesh.c b/drivers/net/wireless/marvell/libertas/mesh.c
index 2315fdff56c2f..2747c957d18c9 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.c
+++ b/drivers/net/wireless/marvell/libertas/mesh.c
@@ -86,6 +86,7 @@ static int lbs_mesh_config_send(struct lbs_private *priv,
 static int lbs_mesh_config(struct lbs_private *priv, uint16_t action,
 		uint16_t chan)
 {
+	struct wireless_dev *mesh_wdev;
 	struct cmd_ds_mesh_config cmd;
 	struct mrvl_meshie *ie;
 
@@ -105,10 +106,17 @@ static int lbs_mesh_config(struct lbs_private *priv, uint16_t action,
 		ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
 		ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
 		ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
-		ie->val.mesh_id_len = priv->mesh_ssid_len;
-		memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
+
+		if (priv->mesh_dev) {
+			mesh_wdev = priv->mesh_dev->ieee80211_ptr;
+			ie->val.mesh_id_len = mesh_wdev->mesh_id_up_len;
+			memcpy(ie->val.mesh_id, mesh_wdev->ssid,
+						mesh_wdev->mesh_id_up_len);
+		}
+
 		ie->len = sizeof(struct mrvl_meshie_val) -
-			IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len;
+			IEEE80211_MAX_SSID_LEN + ie->val.mesh_id_len;
+
 		cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
 		break;
 	case CMD_ACT_MESH_CONFIG_STOP:
@@ -117,8 +125,8 @@ static int lbs_mesh_config(struct lbs_private *priv, uint16_t action,
 		return -1;
 	}
 	lbs_deb_cmd("mesh config action %d type %x channel %d SSID %*pE\n",
-		    action, priv->mesh_tlv, chan, priv->mesh_ssid_len,
-		    priv->mesh_ssid);
+		    action, priv->mesh_tlv, chan, ie->val.mesh_id_len,
+		    ie->val.mesh_id);
 
 	return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
 }
@@ -863,12 +871,6 @@ int lbs_init_mesh(struct lbs_private *priv)
 	/* Stop meshing until interface is brought up */
 	lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_STOP, 1);
 
-	if (priv->mesh_tlv) {
-		sprintf(priv->mesh_ssid, "mesh");
-		priv->mesh_ssid_len = 4;
-		ret = 1;
-	}
-
 	return ret;
 }
 
@@ -997,6 +999,13 @@ static int lbs_add_mesh(struct lbs_private *priv)
 
 	mesh_wdev->iftype = NL80211_IFTYPE_MESH_POINT;
 	mesh_wdev->wiphy = priv->wdev->wiphy;
+
+	if (priv->mesh_tlv) {
+		sprintf(mesh_wdev->ssid, "mesh");
+		mesh_wdev->mesh_id_up_len = 4;
+		ret = 1;
+	}
+
 	mesh_wdev->netdev = mesh_dev;
 
 	mesh_dev->ml_priv = priv;
diff --git a/drivers/net/wireless/marvell/libertas/mesh.h b/drivers/net/wireless/marvell/libertas/mesh.h
index dfe22c91aade0..1561018f226fd 100644
--- a/drivers/net/wireless/marvell/libertas/mesh.h
+++ b/drivers/net/wireless/marvell/libertas/mesh.h
@@ -24,8 +24,7 @@ void lbs_remove_mesh(struct lbs_private *priv);
 
 static inline bool lbs_mesh_activated(struct lbs_private *priv)
 {
-	/* Mesh SSID is only programmed after successful init */
-	return priv->mesh_ssid_len != 0;
+	return !!priv->mesh_tlv;
 }
 
 int lbs_mesh_set_channel(struct lbs_private *priv, u8 channel);
-- 
2.21.0


             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-07 15:18 Lubomir Rintel [this message]
2019-09-13 14:24 ` Kalle Valo

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190907151855.2637984-1-lkundrak@v3.sk \
    --to=lkundrak@v3.sk \
    --cc=kvalo@codeaurora.org \
    --cc=libertas-dev@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox