Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] mac80211_hwsim: adding more 5GHz channels
@ 2019-10-10 18:13 Ramon Fontes
  2019-10-10 18:13 ` [PATCH 2/2] mac80211_hwsim: adding support for OCB Ramon Fontes
  0 siblings, 1 reply; 2+ messages in thread
From: Ramon Fontes @ 2019-10-10 18:13 UTC (permalink / raw)
  To: linux-kernel, netdev, linux-wireless; +Cc: johannes, kvalo, davem, Ramon Fontes

These new 5GHz channels enable the use of the IEEE 802.11p standard

Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 28 +++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 45c73a6f0..c20103792 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -148,23 +148,25 @@ static const char *hwsim_alpha2s[] = {
 };
 
 static const struct ieee80211_regdomain hwsim_world_regdom_custom_01 = {
-	.n_reg_rules = 4,
+	.n_reg_rules = 5,
 	.alpha2 =  "99",
 	.reg_rules = {
 		REG_RULE(2412-10, 2462+10, 40, 0, 20, 0),
 		REG_RULE(2484-10, 2484+10, 40, 0, 20, 0),
 		REG_RULE(5150-10, 5240+10, 40, 0, 30, 0),
 		REG_RULE(5745-10, 5825+10, 40, 0, 30, 0),
+		REG_RULE(5855-10, 5925+10, 40, 0, 33, 0),
 	}
 };
 
 static const struct ieee80211_regdomain hwsim_world_regdom_custom_02 = {
-	.n_reg_rules = 2,
+	.n_reg_rules = 3,
 	.alpha2 =  "99",
 	.reg_rules = {
 		REG_RULE(2412-10, 2462+10, 40, 0, 20, 0),
 		REG_RULE(5725-10, 5850+10, 40, 0, 30,
 			 NL80211_RRF_NO_IR),
+		REG_RULE(5855-10, 5925+10, 40, 0, 33, 0),
 	}
 };
 
@@ -354,6 +356,24 @@ static const struct ieee80211_channel hwsim_channels_5ghz[] = {
 	CHAN5G(5805), /* Channel 161 */
 	CHAN5G(5825), /* Channel 165 */
 	CHAN5G(5845), /* Channel 169 */
+
+	CHAN5G(5855), /* Channel 171 */
+	CHAN5G(5860), /* Channel 172 */
+	CHAN5G(5865), /* Channel 173 */
+	CHAN5G(5870), /* Channel 174 */
+
+	CHAN5G(5875), /* Channel 175 */
+	CHAN5G(5880), /* Channel 176 */
+	CHAN5G(5885), /* Channel 177 */
+	CHAN5G(5890), /* Channel 178 */
+	CHAN5G(5895), /* Channel 179 */
+	CHAN5G(5900), /* Channel 180 */
+	CHAN5G(5905), /* Channel 181 */
+
+	CHAN5G(5910), /* Channel 182 */
+	CHAN5G(5915), /* Channel 183 */
+	CHAN5G(5920), /* Channel 184 */
+	CHAN5G(5925), /* Channel 185 */
 };
 
 static const struct ieee80211_rate hwsim_rates[] = {
@@ -1604,6 +1624,8 @@ mac80211_hwsim_beacon(struct hrtimer *timer)
 }
 
 static const char * const hwsim_chanwidths[] = {
+	[NL80211_CHAN_WIDTH_5] = "ht5",
+	[NL80211_CHAN_WIDTH_10] = "ht10",
 	[NL80211_CHAN_WIDTH_20_NOHT] = "noht",
 	[NL80211_CHAN_WIDTH_20] = "ht20",
 	[NL80211_CHAN_WIDTH_40] = "ht40",
@@ -2847,6 +2869,8 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 	} else {
 		data->if_combination.num_different_channels = 1;
 		data->if_combination.radar_detect_widths =
+					BIT(NL80211_CHAN_WIDTH_5) |
+					BIT(NL80211_CHAN_WIDTH_10) |
 					BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20) |
 					BIT(NL80211_CHAN_WIDTH_40) |
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

* [PATCH 2/2] mac80211_hwsim: adding support for OCB
  2019-10-10 18:13 [PATCH 1/2] mac80211_hwsim: adding more 5GHz channels Ramon Fontes
@ 2019-10-10 18:13 ` Ramon Fontes
  0 siblings, 0 replies; 2+ messages in thread
From: Ramon Fontes @ 2019-10-10 18:13 UTC (permalink / raw)
  To: linux-kernel, netdev, linux-wireless; +Cc: johannes, kvalo, davem, Ramon Fontes

OCB (Outside the Context of a BSS) interfaces are necessary for the IEEE 802.11p standard

Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index c20103792..ae41b05e7 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1570,7 +1570,8 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 
 	if (vif->type != NL80211_IFTYPE_AP &&
 	    vif->type != NL80211_IFTYPE_MESH_POINT &&
-	    vif->type != NL80211_IFTYPE_ADHOC)
+	    vif->type != NL80211_IFTYPE_ADHOC &&
+	    vif->type != NL80211_IFTYPE_OCB)
 		return;
 
 	skb = ieee80211_beacon_get(hw, vif);
@@ -2745,7 +2746,8 @@ static void mac80211_hwsim_he_capab(struct ieee80211_supported_band *sband)
 	 BIT(NL80211_IFTYPE_P2P_CLIENT) | \
 	 BIT(NL80211_IFTYPE_P2P_GO) | \
 	 BIT(NL80211_IFTYPE_ADHOC) | \
-	 BIT(NL80211_IFTYPE_MESH_POINT))
+	 BIT(NL80211_IFTYPE_MESH_POINT) | \
+	 BIT(NL80211_IFTYPE_OCB))
 
 static int mac80211_hwsim_new_radio(struct genl_info *info,
 				    struct hwsim_new_radio_params *param)
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-10 18:13 [PATCH 1/2] mac80211_hwsim: adding more 5GHz channels Ramon Fontes
2019-10-10 18:13 ` [PATCH 2/2] mac80211_hwsim: adding support for OCB Ramon Fontes

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox