From: John Crispin <john@phrozen.org>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org, ath10k@lists.infradead.org,
John Crispin <john@phrozen.org>,
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Subject: [PATCH V9 3/3] ath10k: add tx hw 802.11 encapusaltion offloading support
Date: Tue, 29 Oct 2019 10:13:04 +0100 [thread overview]
Message-ID: <20191029091304.7330-4-john@phrozen.org> (raw)
In-Reply-To: <20191029091304.7330-1-john@phrozen.org>
This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.
Testing on a IPQ4019 based hardware shows a increase in TCP throughput
of ~20% when the feature is enabled.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath10k/core.c | 11 ++++
drivers/net/wireless/ath/ath10k/core.h | 3 +
drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +++++---
drivers/net/wireless/ath/ath10k/mac.c | 76 +++++++++++++++++++-----
drivers/net/wireless/ath/ath10k/txrx.c | 11 +++-
5 files changed, 100 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index dc45d16e8d21..6fc637c73e26 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -33,6 +33,7 @@ static bool uart_print;
static bool skip_otp;
static bool rawmode;
static bool fw_diag_log;
+static bool ethernetmode;
unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
@@ -45,6 +46,7 @@ module_param(skip_otp, bool, 0644);
module_param(rawmode, bool, 0644);
module_param(fw_diag_log, bool, 0644);
module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
+module_param(ethernetmode, bool, 0644);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
@@ -53,6 +55,7 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging");
+MODULE_PARM_DESC(ethernetmode, "Use ethernet frame datapath");
static const struct ath10k_hw_params ath10k_hw_params_list[] = {
{
@@ -3007,6 +3010,14 @@ static void ath10k_core_register_work(struct work_struct *work)
/* peer stats are enabled by default */
set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
+ if (ethernetmode && rawmode) {
+ ath10k_err(ar, "ethernet and raw mode cannot co-exist\n");
+ status = -EINVAL;
+ goto err;
+ }
+
+ ar->ethernetmode = ethernetmode;
+
status = ath10k_core_probe_fw(ar);
if (status) {
ath10k_err(ar, "could not probe fw (%d)\n", status);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 4d7db07db6ba..89f2d2982f37 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -109,6 +109,7 @@ enum ath10k_skb_flags {
ATH10K_SKB_F_MGMT = BIT(3),
ATH10K_SKB_F_QOS = BIT(4),
ATH10K_SKB_F_RAW_TX = BIT(5),
+ ATH10K_SKB_F_HW_80211_ENCAP = BIT(6),
};
struct ath10k_skb_cb {
@@ -1211,6 +1212,8 @@ struct ath10k {
struct ath10k_bus_params bus_param;
struct completion peer_delete_done;
+ bool ethernetmode;
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 2ef717f18795..403b6843da9e 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1144,6 +1144,10 @@ static u8 ath10k_htt_tx_get_tid(struct sk_buff *skb, bool is_eth)
struct ieee80211_hdr *hdr = (void *)skb->data;
struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
+ /* Firmware takes care of tid classification for ethernet format */
+ if (cb->flags & ATH10K_SKB_F_HW_80211_ENCAP)
+ return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+
if (!is_eth && ieee80211_is_mgmt(hdr->frame_control))
return HTT_DATA_TX_EXT_TID_MGMT;
else if (cb->flags & ATH10K_SKB_F_QOS)
@@ -1370,15 +1374,17 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
txbuf_paddr = htt->txbuf.paddr +
(sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
- if ((ieee80211_is_action(hdr->frame_control) ||
- ieee80211_is_deauth(hdr->frame_control) ||
- ieee80211_is_disassoc(hdr->frame_control)) &&
- ieee80211_has_protected(hdr->frame_control)) {
- skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
- } else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
- txmode == ATH10K_HW_TXRX_RAW &&
- ieee80211_has_protected(hdr->frame_control)) {
- skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+ if ((ieee80211_is_action(hdr->frame_control) ||
+ ieee80211_is_deauth(hdr->frame_control) ||
+ ieee80211_is_disassoc(hdr->frame_control)) &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ } else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+ txmode == ATH10K_HW_TXRX_RAW &&
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+ }
}
skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 12dad659bf68..4b4abf27182c 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3426,12 +3426,16 @@ ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
struct sk_buff *skb)
{
const struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
__le16 fc = hdr->frame_control;
if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
return ATH10K_HW_TXRX_RAW;
+ if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ return ATH10K_HW_TXRX_ETHERNET;
+
if (ieee80211_is_mgmt(fc))
return ATH10K_HW_TXRX_MGMT;
@@ -3584,6 +3588,15 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
ieee80211_is_data_qos(hdr->frame_control);
cb->flags = 0;
+ cb->vif = vif;
+ cb->txq = txq;
+ cb->airtime_est = airtime;
+
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ cb->flags |= ATH10K_SKB_F_HW_80211_ENCAP;
+ return;
+ }
+
if (!ath10k_tx_h_use_hwcrypto(vif, skb))
cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
@@ -3602,10 +3615,6 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
cb->flags |= ATH10K_SKB_F_RAW_TX;
}
-
- cb->vif = vif;
- cb->txq = txq;
- cb->airtime_est = airtime;
}
bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
@@ -3715,6 +3724,9 @@ static int ath10k_mac_tx(struct ath10k *ar,
const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
int ret;
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+ goto skip_encap;
+
/* We should disable CCK RATE due to P2P */
if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
@@ -3738,6 +3750,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
}
}
+skip_encap:
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
if (!ath10k_mac_tx_frm_has_freq(ar)) {
ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n",
@@ -3787,6 +3800,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
int ret;
unsigned long time_left;
bool tmp_peer_created = false;
+ struct ieee80211_tx_info *info;
/* FW requirement: We must create a peer before FW will send out
* an offchannel frame. Otherwise the frame will be stuck and
@@ -3806,8 +3820,14 @@ void ath10k_offchan_tx_work(struct work_struct *work)
ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n",
skb);
- hdr = (struct ieee80211_hdr *)skb->data;
- peer_addr = ieee80211_get_DA(hdr);
+ info = IEEE80211_SKB_CB(skb);
+
+ if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+ peer_addr = skb->data;
+ } else {
+ hdr = (struct ieee80211_hdr *)skb->data;
+ peer_addr = ieee80211_get_DA(hdr);
+ }
spin_lock_bh(&ar->data_lock);
vdev_id = ar->scan.vdev_id;
@@ -4335,7 +4355,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif = info->control.vif;
struct ieee80211_sta *sta = control->sta;
struct ieee80211_txq *txq = NULL;
- struct ieee80211_hdr *hdr = (void *)skb->data;
+ struct ieee80211_hdr *hdr;
enum ath10k_hw_txrx_mode txmode;
enum ath10k_mac_tx_path txpath;
bool is_htt;
@@ -4366,14 +4386,20 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
return;
}
- ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
- if (ret) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
- ret);
- ath10k_htt_tx_dec_pending(htt);
- spin_unlock_bh(&ar->htt.tx_lock);
- ieee80211_free_txskb(ar->hw, skb);
- return;
+ if (is_mgmt) {
+ hdr = (struct ieee80211_hdr *)skb->data;
+ is_presp = ieee80211_is_probe_resp(hdr->frame_control);
+
+ ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt,
+ is_presp);
+ if (ret) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
+ ret);
+ ath10k_htt_tx_dec_pending(htt);
+ spin_unlock_bh(&ar->htt.tx_lock);
+ ieee80211_free_txskb(ar->hw, skb);
+ return;
+ }
}
spin_unlock_bh(&ar->htt.tx_lock);
}
@@ -5130,10 +5156,12 @@ static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
static int ath10k_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
+ struct wireless_dev *wdev = ieee80211_vif_to_wdev(vif);
struct ath10k *ar = hw->priv;
struct ath10k_vif *arvif = (void *)vif->drv_priv;
struct ath10k_peer *peer;
enum wmi_sta_powersave_param param;
+ int hw_encap = 0;
int ret = 0;
u32 value;
int bit;
@@ -5225,6 +5253,22 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
break;
}
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_AP_VLAN:
+ if (wdev->netdev->ieee80211_ptr->use_4addr)
+ break;
+ /* fall through */
+ case NL80211_IFTYPE_AP:
+ hw_encap = 1;
+ break;
+ default:
+ break;
+ }
+
+ ieee80211_set_hw_80211_encap(vif, ar->ethernetmode & hw_encap);
+
/* Using vdev_id as queue number will make it very easy to do per-vif
* tx queue locking. This shouldn't wrap due to interface combinations
* but do a modulo for correctness sake and prevent using offchannel tx
@@ -8789,6 +8833,8 @@ int ath10k_mac_register(struct ath10k *ar)
ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+ if (ar->ethernetmode)
+ ieee80211_hw_set(ar->hw, SUPPORTS_80211_ENCAP);
if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 4102df016931..608d6d6967fa 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -50,6 +50,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
struct ath10k_skb_cb *skb_cb;
struct ath10k_txq *artxq;
struct sk_buff *msdu;
+ struct ieee80211_vif *vif;
+ u8 flags;
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt tx completion msdu_id %u status %d\n",
@@ -78,6 +80,9 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
artxq->num_fw_queued--;
}
+ flags = skb_cb->flags;
+ vif = skb_cb->vif;
+
ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
ath10k_htt_tx_dec_pending(htt);
if (htt->num_pending_tx == 0)
@@ -121,7 +126,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
info->status.is_valid_ack_signal = true;
}
- ieee80211_tx_status(htt->ar->hw, msdu);
+ if (flags & ATH10K_SKB_F_HW_80211_ENCAP)
+ ieee80211_tx_status_8023(htt->ar->hw, vif, msdu);
+ else
+ ieee80211_tx_status(htt->ar->hw, msdu);
+
/* we do not own the msdu anymore */
return 0;
--
2.20.1
prev parent reply other threads:[~2019-10-29 9:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 9:13 [PATCH V9 0/3] mac80211: add 802.11 encapsulation offloading John Crispin
2019-10-29 9:13 ` [PATCH V9 1/3] mac80211: move store skb ack code to its own function John Crispin
2019-10-29 9:13 ` [PATCH V9 2/3] mac80211: add hw 80211 encapsulation offloading support John Crispin
2019-10-30 22:53 ` kbuild test robot
2019-11-08 10:52 ` Johannes Berg
2019-10-29 9:13 ` John Crispin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029091304.7330-4-john@phrozen.org \
--to=john@phrozen.org \
--cc=ath10k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=vthiagar@qti.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).