linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Amitkumar Karwar <amitkarwar@gmail.com>,
	Siva Rebbagondla <siva8118@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	Johan Hovold <johan@kernel.org>, stable <stable@vger.kernel.org>,
	Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Subject: [PATCH 4/5] rsi: fix non-atomic allocation in completion handler
Date: Thu, 28 Nov 2019 18:22:03 +0100	[thread overview]
Message-ID: <20191128172204.26600-5-johan@kernel.org> (raw)
In-Reply-To: <20191128172204.26600-1-johan@kernel.org>

USB completion handlers are called in atomic context and must
specifically not allocate memory using GFP_KERNEL.

Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface")
Cc: stable <stable@vger.kernel.org> # 4.17
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 2c869df1c62e..ead75574e10a 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/types.h>
 #include <net/rsi_91x.h>
 #include "rsi_usb.h"
 #include "rsi_hal.h"
@@ -29,7 +30,7 @@ MODULE_PARM_DESC(dev_oper_mode,
 		 "9[Wi-Fi STA + BT LE], 13[Wi-Fi STA + BT classic + BT LE]\n"
 		 "6[AP + BT classic], 14[AP + BT classic + BT LE]");
 
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num);
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t flags);
 
 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
@@ -285,7 +286,7 @@ static void rsi_rx_done_handler(struct urb *urb)
 	status = 0;
 
 out:
-	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num))
+	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
 
 	if (status)
@@ -307,7 +308,7 @@ static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
  *
  * Return: 0 on success, a negative error code on failure.
  */
-static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
+static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num, gfp_t mem_flags)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	struct rx_usb_ctrl_block *rx_cb = &dev->rx_cb[ep_num - 1];
@@ -337,7 +338,7 @@ static int rsi_rx_urb_submit(struct rsi_hw *adapter, u8 ep_num)
 			  rsi_rx_done_handler,
 			  rx_cb);
 
-	status = usb_submit_urb(urb, GFP_KERNEL);
+	status = usb_submit_urb(urb, mem_flags);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);
 		dev_kfree_skb(skb);
@@ -827,12 +828,12 @@ static int rsi_probe(struct usb_interface *pfunction,
 		rsi_dbg(INIT_ZONE, "%s: Device Init Done\n", __func__);
 	}
 
-	status = rsi_rx_urb_submit(adapter, WLAN_EP);
+	status = rsi_rx_urb_submit(adapter, WLAN_EP, GFP_KERNEL);
 	if (status)
 		goto err1;
 
 	if (adapter->priv->coex_mode > 1) {
-		status = rsi_rx_urb_submit(adapter, BT_EP);
+		status = rsi_rx_urb_submit(adapter, BT_EP, GFP_KERNEL);
 		if (status)
 			goto err_kill_wlan_urb;
 	}
-- 
2.24.0


  parent reply	other threads:[~2019-11-28 17:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-28 17:21 [PATCH 0/5] rsi: fix use-after-free, memleak and sleep-while-atomic Johan Hovold
2019-11-28 17:22 ` [PATCH 1/5] rsi: fix use-after-free on failed probe and unbind Johan Hovold
2019-12-18 18:57   ` Kalle Valo
2019-11-28 17:22 ` [PATCH 2/5] rsi: fix use-after-free on probe errors Johan Hovold
2019-11-28 17:22 ` [PATCH 3/5] rsi: fix memory leak on failed URB submission Johan Hovold
2019-11-28 17:22 ` Johan Hovold [this message]
2019-11-28 17:22 ` [PATCH 5/5] rsi: add missing endpoint sanity checks Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191128172204.26600-5-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=amitkarwar@gmail.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=prameela.j04cs@gmail.com \
    --cc=siva8118@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).