Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
	John Crispin <john@phrozen.org>
Subject: [PATCH V2 1/9] ath11k: add wmi helper for turning STA PS on/off
Date: Wed,  4 Dec 2019 19:17:37 +0100
Message-ID: <20191204181745.27297-2-john@phrozen.org> (raw)
In-Reply-To: <20191204181745.27297-1-john@phrozen.org>

Add a WMI call helper to set the powersave mode of a STA interface.

Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 30 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h |  7 +++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index b05642617b78..bf3c246ce883 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1178,6 +1178,36 @@ int ath11k_wmi_pdev_set_param(struct ath11k *ar, u32 param_id,
 	return ret;
 }
 
+int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id, u32 enable)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_pdev_set_ps_mode_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_sc, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_pdev_set_ps_mode_cmd *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_STA_POWERSAVE_MODE_CMD) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->vdev_id = vdev_id;
+	cmd->sta_ps_mode = enable;
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_STA_POWERSAVE_MODE_CMDID);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send WMI_PDEV_SET_PARAM cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI vdev set psmode %d vdev id %d\n",
+		   enable, vdev_id);
+
+	return ret;
+}
+
 int ath11k_wmi_pdev_suspend(struct ath11k *ar, u32 suspend_opt,
 			    u32 pdev_id)
 {
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 4a518d406bc5..9919d8bf297b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2827,6 +2827,12 @@ struct wmi_pdev_set_param_cmd {
 	u32 param_value;
 } __packed;
 
+struct wmi_pdev_set_ps_mode_cmd {
+	u32 tlv_header;
+	u32 vdev_id;
+	u32 sta_ps_mode;
+} __packed;
+
 struct wmi_pdev_suspend_cmd {
 	u32 tlv_header;
 	u32 pdev_id;
@@ -4682,6 +4688,7 @@ int ath11k_wmi_set_peer_param(struct ath11k *ar, const u8 *peer_addr,
 			      u32 vdev_id, u32 param_id, u32 param_val);
 int ath11k_wmi_pdev_set_param(struct ath11k *ar, u32 param_id,
 			      u32 param_value, u8 pdev_id);
+int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id, u32 enable);
 int ath11k_wmi_wait_for_unified_ready(struct ath11k_base *ab);
 int ath11k_wmi_cmd_init(struct ath11k_base *ab);
 int ath11k_wmi_wait_for_service_ready(struct ath11k_base *ab);
-- 
2.20.1


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-04 18:17 [PATCH V2 0/9] ath11k: resend pending patches John Crispin
2019-12-04 18:17 ` John Crispin [this message]
2019-12-04 18:17 ` [PATCH V2 2/9] ath11k: disable PS for STA interfaces by default upon bringup John Crispin
2019-12-04 18:17 ` [PATCH V2 3/9] ath11k: drop memset when setting up a tx cmd desc John Crispin
2019-12-04 18:17 ` [PATCH V2 4/9] ath11k: rename ath11k_wmi_base instances from wmi_sc to wmi_ab John Crispin
2019-12-04 18:17 ` [PATCH V2 5/9] ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs John Crispin
2019-12-04 18:17 ` [PATCH V2 6/9] ath11k: add debugfs for TWT debug calls John Crispin
2019-12-04 18:17 ` [PATCH V2 7/9] ath11k: move some tx_status parsing to debugfs code John Crispin
2019-12-04 18:17 ` [PATCH V2 8/9] ath11k: optimise ath11k_dp_tx_completion_handler John Crispin
2019-12-04 18:17 ` [PATCH V2 9/9] ath11k: optimize ath11k_hal_tx_status_parse John Crispin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191204181745.27297-2-john@phrozen.org \
    --to=john@phrozen.org \
    --cc=ath11k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git