Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Ping-Ke Shih <pkshih@realtek.com>,
	Yan-Hsuan Chuang <yhchuang@realtek.com>,
	Chris Chiu <chiu@endlessm.com>, Kalle Valo <kvalo@codeaurora.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 109/542] rtw88: fix rate mask for 1SS chip
Date: Fri, 14 Feb 2020 10:41:41 -0500
Message-ID: <20200214154854.6746-109-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 35a68fa5f96a80797e11b6952a47c5a84939a7bf ]

The rate mask is used to tell firmware the supported rate depends on
negotiation. We loop 2 times for all VHT/HT 2SS rate mask first, and then
only keep the part according to chip's NSS.

This commit fixes the logic error of '&' operations for VHT/HT rate, and
we should run this logic before adding legacy rate.

To access HT MCS map, index 0/1 represent MCS 0-7/8-15 respectively. Use
NL80211_BAND_xxx is incorrect, so fix it as well.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/main.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index ae61415e16654..f369ddca953af 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -706,8 +706,8 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 		if (sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80)
 			is_support_sgi = true;
 	} else if (sta->ht_cap.ht_supported) {
-		ra_mask |= (sta->ht_cap.mcs.rx_mask[NL80211_BAND_5GHZ] << 20) |
-			   (sta->ht_cap.mcs.rx_mask[NL80211_BAND_2GHZ] << 12);
+		ra_mask |= (sta->ht_cap.mcs.rx_mask[1] << 20) |
+			   (sta->ht_cap.mcs.rx_mask[0] << 12);
 		if (sta->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
 			stbc_en = HT_STBC_EN;
 		if (sta->ht_cap.cap & IEEE80211_HT_CAP_LDPC_CODING)
@@ -717,6 +717,9 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 			is_support_sgi = true;
 	}
 
+	if (efuse->hw_cap.nss == 1)
+		ra_mask &= RA_MASK_VHT_RATES_1SS | RA_MASK_HT_RATES_1SS;
+
 	if (hal->current_band_type == RTW_BAND_5G) {
 		ra_mask |= (u64)sta->supp_rates[NL80211_BAND_5GHZ] << 4;
 		if (sta->vht_cap.vht_supported) {
@@ -750,11 +753,6 @@ void rtw_update_sta_info(struct rtw_dev *rtwdev, struct rtw_sta_info *si)
 		wireless_set = 0;
 	}
 
-	if (efuse->hw_cap.nss == 1) {
-		ra_mask &= RA_MASK_VHT_RATES_1SS;
-		ra_mask &= RA_MASK_HT_RATES_1SS;
-	}
-
 	switch (sta->bandwidth) {
 	case IEEE80211_STA_RX_BW_80:
 		bw_mode = RTW_CHANNEL_WIDTH_80;
-- 
2.20.1


  parent reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:39 ` [PATCH AUTOSEL 5.5 004/542] ath10k: Fix qmi init error handling Sasha Levin
2020-02-14 15:39 ` [PATCH AUTOSEL 5.5 005/542] wil6210: fix break that is never reached because of zero'ing of a retry counter Sasha Levin
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 026/542] brcmfmac: Fix memory leak in brcmf_p2p_create_p2pdev() Sasha Levin
2020-02-14 15:40 ` [PATCH AUTOSEL 5.5 027/542] brcmfmac: Fix use after free in brcmf_sdio_readframes() Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 107/542] ath10k: Correct the DMA direction for management tx buffers Sasha Levin
2020-02-14 15:41 ` Sasha Levin [this message]
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 110/542] brcmfmac: sdio: Fix OOB interrupt initialization on brcm43362 Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 111/542] libertas: don't exit from lbs_ibss_join_existing() with RCU read lock held Sasha Levin
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 112/542] libertas: make lbs_ibss_join_existing() return error code on rates overflow Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 132/542] mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap Sasha Levin
2020-02-14 15:42 ` [PATCH AUTOSEL 5.5 167/542] ath10k: correct the tlv len of ath10k_wmi_tlv_op_gen_config_pno_start Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 226/542] b43legacy: Fix -Wcast-function-type Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 227/542] ipw2x00: " Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 228/542] iwlegacy: " Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 229/542] rtlwifi: rtl_pci: " Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 230/542] bcma: remove set but not used variable 'sizel' Sasha Levin
2020-02-14 15:43 ` [PATCH AUTOSEL 5.5 231/542] orinoco: avoid assertion in case of NULL pointer Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 471/542] ath10k: pci: Only dump ATH10K_MEM_REGION_TYPE_IOREG when safe Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 472/542] hostap: Adjust indentation in prism2_hostapd_add_sta Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 473/542] rtw88: fix potential NULL skb access in TX ISR Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 474/542] rtlwifi: rtl8821ae: remove unused variables Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 475/542] rtlwifi: rtl8192ee: " Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 476/542] rtlwifi: rtl8723ae: " Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 477/542] iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 484/542] mwifiex: Fix possible buffer overflows in mwifiex_ret_wmm_get_status() Sasha Levin
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 485/542] mwifiex: Fix possible buffer overflows in mwifiex_cmd_append_vsie_tlv() Sasha Levin
2020-02-14 15:48 ` [PATCH AUTOSEL 5.5 516/542] iwlwifi: mvm: Fix thermal zone registration Sasha Levin
2020-02-14 15:48 ` [PATCH AUTOSEL 5.5 517/542] iwlwifi: mvm: avoid use after free for pmsr request Sasha Levin
2020-02-14 15:48 ` [PATCH AUTOSEL 5.5 518/542] iwlwifi: mvm: Check the sta is not NULL in iwl_mvm_cfg_he_sta() Sasha Levin
2020-02-14 15:48 ` [PATCH AUTOSEL 5.5 519/542] iwlwifi: mvm: fix TDLS discovery with the new firmware API Sasha Levin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-109-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=chiu@endlessm.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pkshih@realtek.com \
    --cc=stable@vger.kernel.org \
    --cc=yhchuang@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git