From: <Ajay.Kathat@microchip.com>
To: <linux-wireless@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <devicetree@vger.kernel.org>,
<gregkh@linuxfoundation.org>, <johannes@sipsolutions.net>,
<Adham.Abozaeid@microchip.com>, <Nicolas.Ferre@microchip.com>,
<Claudiu.Beznea@microchip.com>, <Venkateswara.Kaja@microchip.com>,
<Ajay.Kathat@microchip.com>
Subject: [PATCH v3 16/18] dt: bindings: net: add microchip,wilc1000,sdio.yaml
Date: Tue, 25 Feb 2020 07:41:19 +0000 [thread overview]
Message-ID: <20200225074105.7740-17-ajay.kathat@microchip.com> (raw)
In-Reply-To: <20200225074105.7740-1-ajay.kathat@microchip.com>
From: Ajay Singh <ajay.kathat@microchip.com>
Moved '/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml' to
'Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml'.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
.../net/wireless/microchip,wilc1000,sdio.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml
new file mode 100644
index 000000000000..b338f569f7e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000,sdio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,sdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless SDIO devicetree bindings
+
+maintainers:
+ - Adham Abozaeid <adham.abozaeid@microchip.com>
+ - Ajay Singh <ajay.kathat@microchip.com>
+
+description:
+ The wilc1000 chips can be connected via SDIO. The node is used to
+ specify child node to the SDIO controller that connects the device
+ to the system.
+
+properties:
+ compatible:
+ const: microchip,wilc1000-sdio
+
+ irq-gpios:
+ description: The GPIO phandle connect to a host IRQ.
+ maxItems: 1
+
+ reg:
+ description: Slot ID used in the controller.
+ maxItems: 1
+
+ clocks:
+ description: phandle to the clock connected on rtc clock line.
+ maxItems: 1
+
+ bus-width:
+ description: The number of data lines wired up the slot.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [1, 4, 8]
+ - default: 1
+
+required:
+ - compatible
+ - irq-gpios
+ - reg
+
+examples:
+ - |
+ mmc1: mmc@fc000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+ non-removable;
+ vmmc-supply = <&vcc_mmc1_reg>;
+ vqmmc-supply = <&vcc_3v3_reg>;
+ status = "okay";
+ wilc_sdio@0 {
+ compatible = "microchip,wilc1000-sdio";
+ irq-gpios = <&pioC 27 0>;
+ reg = <0>;
+ clocks = <&pck1>;
+ clock-names = "rtc_clk";
+ assigned-clocks = <&pck1>;
+ assigned-clock-rates = <32768>;
+ status = "okay";
+ bus-width = <4>;
+ };
+ };
--
2.24.0
next prev parent reply other threads:[~2020-02-25 7:41 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 7:41 [PATCH v3 00/18] wilc1000: move out of staging Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 01/18] wilc1000: add hif.h Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 02/18] wilc1000: add hif.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 03/18] wilc1000: add wlan_if.h Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 04/18] wilc1000: add wlan_cfg.h Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 05/18] wilc1000: add wlan_cfg.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 06/18] wilc1000: add cfg80211.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 07/18] wilc1000: add cfg80211.h Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 08/18] wilc1000: add netdev.h Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 09/18] wilc1000: add netdev.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 11/18] wilc1000: add spi.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 10/18] wilc1000: add mon.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 12/18] wilc1000: add wlan.h Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 13/18] wilc1000: add wlan.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 14/18] wilc1000: add sdio.c Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 15/18] wilc1000: add fw.h Ajay.Kathat
2020-02-25 7:41 ` Ajay.Kathat [this message]
2020-02-25 7:41 ` [PATCH v3 17/18] dt: bindings: net: add microchip,wilc1000,spi.yaml Ajay.Kathat
2020-02-25 7:41 ` [PATCH v3 18/18] wilc1000: add Makefile and Kconfig files for wilc1000 compilation Ajay.Kathat
2020-03-02 9:23 ` [PATCH v3 00/18] wilc1000: move out of staging Dan Carpenter
2020-03-02 16:31 ` Ajay.Kathat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225074105.7740-17-ajay.kathat@microchip.com \
--to=ajay.kathat@microchip.com \
--cc=Adham.Abozaeid@microchip.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=Venkateswara.Kaja@microchip.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).