linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Pedersen <thomas@adapt-ip.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
	Thomas Pedersen <thomas@adapt-ip.com>
Subject: [PATCH 7/9] nl80211: accept scan frequencies in KHz
Date: Wed,  1 Apr 2020 18:18:08 -0700	[thread overview]
Message-ID: <20200402011810.22947-8-thomas@adapt-ip.com> (raw)
In-Reply-To: <20200402011810.22947-1-thomas@adapt-ip.com>

NL80211_ATTR_SCAN_FREQUENCIES_KHZ are optional in addition
to the MHz frequencies specified in
NL80211_ATTR_SCAN_FREQUENCIES.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/uapi/linux/nl80211.h |  2 ++
 net/wireless/nl80211.c       | 23 +++++++++++++++++------
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 28401f039d75..0b76a2dabe25 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2430,6 +2430,7 @@ enum nl80211_commands {
  * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
  *	the allowed channel bandwidth configurations. (u8 attribute)
  *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ * @NL80211_ATTR_SCAN_FREQUENCIES_KHZ: nested attribute with KHz frequencies
  *
  * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
  *	(u16).
@@ -2957,6 +2958,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_WIPHY_FREQ_OFFSET,
 	NL80211_ATTR_CENTER_FREQ1_OFFSET,
+	NL80211_ATTR_SCAN_FREQUENCIES_KHZ,
 
 	/* add attributes here, update the policy in nl80211.c */
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b1226401757a..33feba480df8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -665,6 +665,7 @@ const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_PMK_LIFETIME] = NLA_POLICY_MIN(NLA_U32, 1),
 	[NL80211_ATTR_PMK_REAUTH_THRESHOLD] = NLA_POLICY_RANGE(NLA_U8, 1, 100),
 	[NL80211_ATTR_WIPHY_FREQ_OFFSET] = NLA_POLICY_RANGE(NLA_U32, 0, 999),
+	[NL80211_ATTR_SCAN_FREQUENCIES_KHZ] = { .type = NLA_NESTED },
 };
 
 /* policy for the key attributes */
@@ -7749,6 +7750,8 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct wireless_dev *wdev = info->user_ptr[1];
 	struct cfg80211_scan_request *request;
+	struct nlattr *scan_freqs = NULL;
+	bool scan_freqs_khz = false;
 	struct nlattr *attr;
 	struct wiphy *wiphy;
 	int err, tmp, n_ssids = 0, n_channels, i;
@@ -7767,9 +7770,14 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 		goto unlock;
 	}
 
-	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
-		n_channels = validate_scan_freqs(
-				info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
+	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES_KHZ]) {
+		scan_freqs = info->attrs[NL80211_ATTR_SCAN_FREQUENCIES_KHZ];
+		scan_freqs_khz = true;
+	} else if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES])
+		scan_freqs = info->attrs[NL80211_ATTR_SCAN_FREQUENCIES];
+
+	if (scan_freqs) {
+		n_channels = validate_scan_freqs(scan_freqs);
 		if (!n_channels) {
 			err = -EINVAL;
 			goto unlock;
@@ -7817,13 +7825,16 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	i = 0;
-	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
+	if (scan_freqs) {
 		/* user specified, bail out if channel not found */
-		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp) {
+		nla_for_each_nested(attr, scan_freqs, tmp) {
 			struct ieee80211_channel *chan;
+			int freq = nla_get_u32(attr);
 
-			chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
+			if (!scan_freqs_khz)
+				freq = MHZ_TO_KHZ(freq);
 
+			chan = ieee80211_get_channel_khz(wiphy, freq);
 			if (!chan) {
 				err = -EINVAL;
 				goto out_free;
-- 
2.20.1


  parent reply	other threads:[~2020-04-02  1:18 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-02  1:18 [PATCH 0/9] initial support for S1G channels Thomas Pedersen
2020-04-02  1:18 ` [PATCH 1/9] ieee80211: share 802.11 unit conversion helpers Thomas Pedersen
2020-04-02  1:18 ` [PATCH 2/9] cfg80211: express channels with a KHz component Thomas Pedersen
2020-04-02  1:18 ` [PATCH 3/9] mac80211: handle channel frequency offset Thomas Pedersen
2020-04-02  1:18 ` [PATCH 4/9] mac80211: add freq_offset to RX status Thomas Pedersen
2020-04-02  1:18 ` [PATCH 5/9] cfg80211: report frequency in KHz for management RX Thomas Pedersen
2020-04-24 10:11   ` Johannes Berg
2020-04-02  1:18 ` [PATCH 6/9] nl80211: add KHz frequency offset for most wifi commands Thomas Pedersen
2020-04-02  1:18 ` Thomas Pedersen [this message]
2020-04-02  1:18 ` [PATCH 8/9] ieee80211: S1G defines Thomas Pedersen
2020-04-02  1:18 ` [PATCH 9/9] nl80211: S1G band and channel definitions Thomas Pedersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200402011810.22947-8-thomas@adapt-ip.com \
    --to=thomas@adapt-ip.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).