[PATCH v2 1/2] mt76: mt7615: disable hw/sched scan ops for non-offload firmware

[PATCH v2 1/2] mt76: mt7615: disable hw/sched scan ops for non-offload firmware

[Felix Fietkau]

Avoid having to attempt hw scan and fall back to software for every scan
on devices/firmware without hw scan support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7615/init.c   | 7 +++++++
 drivers/net/wireless/mediatek/mt76/mt7615/mmio.c   | 8 +++++++-
 drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 1 +
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 07d4b259fe8a..7f3683205b8e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -143,6 +143,13 @@ static void mt7615_init_work(struct work_struct *work)
 	mt7615_mac_init(dev);
 	mt7615_phy_init(dev);
 	mt7615_mcu_del_wtbl_all(dev);
+
+	if (!mt7615_firmware_offload(dev)) {
+		dev->ops->hw_scan = NULL;
+		dev->ops->cancel_hw_scan = NULL;
+		dev->ops->sched_scan_start = NULL;
+		dev->ops->sched_scan_stop = NULL;
+	}
 }
 
 static int mt7615_init_hardware(struct mt7615_dev *dev)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c b/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c
index d2eff5442824..3849bb6b49d0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mmio.c
@@ -139,11 +139,16 @@ int mt7615_mmio_probe(struct device *pdev, void __iomem *mem_base,
 		.sta_remove = mt7615_mac_sta_remove,
 		.update_survey = mt7615_update_channel,
 	};
+	struct ieee80211_ops *ops;
 	struct mt7615_dev *dev;
 	struct mt76_dev *mdev;
 	int ret;
 
-	mdev = mt76_alloc_device(pdev, sizeof(*dev), &mt7615_ops, &drv_ops);
+	ops = devm_kmemdup(pdev, &mt7615_ops, sizeof(mt7615_ops), GFP_KERNEL);
+	if (!ops)
+		return -ENOMEM;
+
+	mdev = mt76_alloc_device(pdev, sizeof(*dev), ops, &drv_ops);
 	if (!mdev)
 		return -ENOMEM;
 
@@ -151,6 +156,7 @@ int mt7615_mmio_probe(struct device *pdev, void __iomem *mem_base,
 	mt76_mmio_init(&dev->mt76, mem_base);
 
 	dev->reg_map = map;
+	dev->ops = ops;
 	mdev->rev = (mt76_rr(dev, MT_HW_CHIPID) << 16) |
 		    (mt76_rr(dev, MT_HW_REV) & 0xff);
 	dev_dbg(mdev->dev, "ASIC revision: %04x\n", mdev->rev);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
index 65a2b30fc588..4f0d29e5e595 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h
@@ -235,6 +235,7 @@ struct mt7615_dev {
 
 	u16 chainmask;
 
+	struct ieee80211_ops *ops;
 	const struct mt7615_mcu_ops *mcu_ops;
 	struct regmap *infracfg;
 	const u32 *reg_map;
-- 
2.24.0

[PATCH v2 2/2] mt76: mt7615: set hw scan limits only for firmware with offload support

[Felix Fietkau]

They do not apply to software scan

Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 drivers/net/wireless/mediatek/mt76/mt7615/init.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 7f3683205b8e..96b7c6284833 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -145,10 +145,19 @@ static void mt7615_init_work(struct work_struct *work)
 	mt7615_mcu_del_wtbl_all(dev);
 
 	if (!mt7615_firmware_offload(dev)) {
+		struct wiphy *wiphy = mt76_hw(dev)->wiphy;
+
 		dev->ops->hw_scan = NULL;
 		dev->ops->cancel_hw_scan = NULL;
 		dev->ops->sched_scan_start = NULL;
 		dev->ops->sched_scan_stop = NULL;
+
+		wiphy->max_sched_scan_plan_interval = 0;
+		wiphy->max_sched_scan_ie_len = 0;
+		wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+		wiphy->max_sched_scan_ssids = 0;
+		wiphy->max_match_sets = 0;
+		wiphy->max_sched_scan_reqs = 0;
 	}
 }
 
-- 
2.24.0