From: Govind Singh <govinds@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Govind Singh <govinds@codeaurora.org>
Subject: [PATCH 0/4] Add PCI client driver for QCA6390 chipset
Date: Fri, 8 May 2020 14:27:26 +0530 [thread overview]
Message-ID: <20200508085730.23272-1-govinds@codeaurora.org> (raw)
QCA6390 chipsets is PCI based 11ax chipset to be supported in ath11k.
Add PCI client driver for QCA6390 chipset with enumeration/resource initialization/msi vector mapping.
With these changes driver is splitted in two modules(bus layer module/ common core module).
This is required due to following reasons.
1) PCI based transport layer for QCA6390 chipsets.
2) FW loading based on MHI protocol unlike rproc in IPQ8074A.
3) MSI based data path/CE/fw RAM dump interrupt.
4) CE assignments is different.
5) Different boot up sequence due to requirement of voltage regulators/bootstrap
pinctrls for QCA6390.
6) Clear separation in bus level operation.
For AHB based devices:
ath11k_ahb.ko
ath11k_ko
For PCI based devices:
ath11k_pci.ko
ath11k.ko
Tested HW:
IPQ8074A
X86 + QCA6390: pci probe/resource setup
Govind Singh (4):
ath11k: Add PCI client driver for QCA6390 chipset
ath11k: setup pci resource for QCA6390 target
ath11k: Add msi config init for QCA6390
ath11k: Register mhi controller device for qca6390
drivers/net/wireless/ath/ath11k/Kconfig | 13 +-
drivers/net/wireless/ath/ath11k/Makefile | 7 +-
drivers/net/wireless/ath/ath11k/ahb.c | 71 -----
drivers/net/wireless/ath/ath11k/ce.c | 2 +
drivers/net/wireless/ath/ath11k/core.c | 7 +
drivers/net/wireless/ath/ath11k/core.h | 11 +-
drivers/net/wireless/ath/ath11k/debug.c | 6 +-
drivers/net/wireless/ath/ath11k/debug.h | 1 +
drivers/net/wireless/ath/ath11k/dp.c | 1 +
drivers/net/wireless/ath/ath11k/hal.c | 1 +
drivers/net/wireless/ath/ath11k/hif.h | 77 ++++-
drivers/net/wireless/ath/ath11k/mhi.c | 379 ++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/mhi.h | 28 ++
drivers/net/wireless/ath/ath11k/pci.c | 385 +++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/pci.h | 49 +++
15 files changed, 954 insertions(+), 84 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath11k/mhi.c
create mode 100644 drivers/net/wireless/ath/ath11k/mhi.h
create mode 100644 drivers/net/wireless/ath/ath11k/pci.c
create mode 100644 drivers/net/wireless/ath/ath11k/pci.h
--
2.22.0
next reply other threads:[~2020-05-08 8:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 8:57 Govind Singh [this message]
2020-05-08 8:58 [PATCH 0/4] Add PCI client driver for QCA6390 chipset Govind Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200508085730.23272-1-govinds@codeaurora.org \
--to=govinds@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).