From: Kalle Valo <kvalo@codeaurora.org>
To: Luca Coelho <luca@coelho.fi>
Cc: linux-wireless@vger.kernel.org, linuxwifi@intel.com
Subject: Re: pull-request: iwlwifi-next 2020-05-08
Date: Wed, 13 May 2020 16:15:54 +0000 (UTC) [thread overview]
Message-ID: <20200513161554.089FFC433D2@smtp.codeaurora.org> (raw)
In-Reply-To: <8d6ec060c5a7513bc2f9ad617455ec76e48ac6d6.camel@coelho.fi>
Luca Coelho <luca@coelho.fi> wrote:
> Hi Kalle,
>
> Here's the second batch of patches intended for v5.8. This includes
> the last three patchsets I sent out. Usual development work. More
> details about the contents in the tag description.
>
> Please let me know if there are any issues.
>
> Cheers,
> Luca.
>
>
> The following changes since commit 790709f249728640faa4eff38286a9feb34fed81:
>
> net: relax SO_TXTIME CAP_NET_ADMIN check (2020-05-07 18:17:32 -0700)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next.git tags/iwlwifi-next-for-kalle-2020-05-08
>
> for you to fetch changes up to d3d2674cc6ff10e89bfbace7b943c09fb9052cca:
>
> iwlwifi: dbg_ini: differentiate ax210 hw with same hw type (2020-05-08 09:53:12 +0300)
>
> ----------------------------------------------------------------
> Second set of iwlwifi patches intended for v5.8
>
> * Support new FW APIs;
> * Remove some old and unused features;
> * HW configuration rework continues;
> * Some queues rework by Johannes;
> * Enable A-AMSDU in low latency;
> * Some debugging fixes;
> * Some other small fixes and clean-ups;
>
> ----------------------------------------------------------------
> Avraham Stern (1):
> iwlwifi: mvm: add support for range request command version 9
>
> Emmanuel Grumbach (4):
> iwlwifi: remove antenna_coupling module parameter
> iwlwifi: mvm: stop supporting swcrypto and bt_coex_active module parameters
> iwlwifi: mvm: remove iwlmvm's tfd_q_hang_detect module parameter
> iwlwifi: move iwl_set_soc_latency to iwl-drv to be used by other op_modes
>
> Johannes Berg (10):
> iwlwifi: fw api: fix PHY data 2/3 position
> iwlwifi: pcie: allocate much smaller byte-count table
> iwlwifi: mvm: attempt to allocate smaller queues
> iwlwifi: dbg: mark a variable __maybe_unused
> iwlwifi: pcie: remove some dead code
> iwlwifi: pcie: gen2: use DMA pool for byte-count tables
> iwlwifi: use longer queues for 256-BA
> iwlwifi: mvm: don't transmit on unallocated queue
> iwlwifi: remove outdated copyright print/module statement
> iwlwifi: pcie: skip fragmented receive buffers
>
> Liad Kaufman (1):
> iwlwifi: dbg_ini: differentiate ax210 hw with same hw type
>
> Luca Coelho (8):
> iwlwifi: bump FW API to 55 for AX devices
> iwlwifi: mvm: initialize iwl_dev_tx_power_cmd to zero
> iwlwifi: mvm: add IML/ROM information to the assertion dumps
> iwlwifi: pcie: remove outdated comment about PCI RTPM reference
> iwlwifi: pcie: remove mangling for iwl_ax101_cfg_qu_hr
> iwlwifi: pcie: convert QnJ with Hr to the device table
> iwlwifi: pcie: remove occurrences of 22000 in the FW name defines
> iwlwifi: pcie: convert all AX101 devices to the device tables
>
> Mordechay Goodstein (8):
> iwlwifi: yoyo: add support for parsing SHARED_MEM_ALLOC version 4
> iwlwifi: yoyo: use hweight_long instead of bit manipulating
> iwlwifi: yoyo: don't access TLV before verifying len
> iwlwifi: avoid debug max amsdu config overwriting itself
> iwlwifi: yoyo: add D3 resume timepoint
> iwlwifi: yoyo: remove magic number
> iwlwifi: dump api version in yaml format
> iwlwifi: tx: enable A-MSDU in low latency mode
>
> Shahar S Matityahu (1):
> iwlwifi: dbg: set debug descriptor to NULL outside of iwl_fw_free_dump_desc
>
> Shaul Triebitz (1):
> iwlwifi: mvm: set properly station flags in STA_HE_CTXT_CMD
>
> drivers/net/wireless/intel/iwlwifi/cfg/22000.c | 104 ++++++++++++++++++++++++++++++++++++++++------------------------------------------------
> drivers/net/wireless/intel/iwlwifi/dvm/dev.h | 3 +--
> drivers/net/wireless/intel/iwlwifi/dvm/main.c | 11 ++--------
> drivers/net/wireless/intel/iwlwifi/dvm/rs.c | 11 +---------
> drivers/net/wireless/intel/iwlwifi/fw/api/dbg-tlv.h | 5 +++--
> drivers/net/wireless/intel/iwlwifi/fw/api/debug.h | 14 ++++++------
> drivers/net/wireless/intel/iwlwifi/fw/api/location.h | 110 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------
> drivers/net/wireless/intel/iwlwifi/fw/api/rx.h | 14 ++++++------
> drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 99 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------
> drivers/net/wireless/intel/iwlwifi/fw/debugfs.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
> drivers/net/wireless/intel/iwlwifi/fw/error-dump.h | 13 +++++++++--
> drivers/net/wireless/intel/iwlwifi/fw/init.c | 55 +++++++++++++++++++++++++++++++++++++++++++++--
> drivers/net/wireless/intel/iwlwifi/fw/runtime.h | 6 ++++--
> drivers/net/wireless/intel/iwlwifi/fw/smem.c | 14 ++++++++----
> drivers/net/wireless/intel/iwlwifi/iwl-config.h | 15 ++++++++-----
> drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 44 ++++++++++++++++++-------------------
> drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 14 +++---------
> drivers/net/wireless/intel/iwlwifi/iwl-drv.h | 7 +++---
> drivers/net/wireless/intel/iwlwifi/iwl-fh.h | 7 +++---
> drivers/net/wireless/intel/iwlwifi/iwl-modparams.h | 8 ++-----
> drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 11 +++++-----
> drivers/net/wireless/intel/iwlwifi/mvm/coex.c | 7 +++---
> drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 34 +++++++++++++----------------
> drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 11 ++++++----
> drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++-----------
> drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 53 ++++-----------------------------------------
> drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 56 +++++++++++++++++++++++------------------------
> drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 8 ++-----
> drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 13 +++--------
> drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 15 +++++++------
> drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 51 +++++++++++++++++++++++++++----------------
> drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 11 ++++------
> drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 29 +++++++++++++++++++------
> drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 111 +++++++++++++++++++++++++++-------------------------------------------------------------------
> drivers/net/wireless/intel/iwlwifi/pcie/internal.h | 5 ++++-
> drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 32 ++++++++++++++++++++++-----
> drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 19 ++++++++++++++++
> drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 33 +++++++++++++++++++---------
> drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 12 +++++------
> 39 files changed, 761 insertions(+), 475 deletions(-)
Pulled, thanks.
c73fb4d33e1d Merge tag 'iwlwifi-next-for-kalle-2020-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
--
https://patchwork.kernel.org/patch/11535781/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
prev parent reply other threads:[~2020-05-13 16:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-08 7:11 pull-request: iwlwifi-next 2020-05-08 Luca Coelho
2020-05-13 16:15 ` Kalle Valo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200513161554.089FFC433D2@smtp.codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linuxwifi@intel.com \
--cc=luca@coelho.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).