From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Qiujun Huang <hqjagain@gmail.com>,
syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com,
Kalle Valo <kvalo@codeaurora.org>,
Sasha Levin <sashal@kernel.org>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.7 094/274] ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
Date: Mon, 8 Jun 2020 19:03:07 -0400 [thread overview]
Message-ID: <20200608230607.3361041-94-sashal@kernel.org> (raw)
In-Reply-To: <20200608230607.3361041-1-sashal@kernel.org>
From: Qiujun Huang <hqjagain@gmail.com>
[ Upstream commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 ]
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 48 ++++++++++++++++++------
drivers/net/wireless/ath/ath9k/hif_usb.h | 5 +++
2 files changed, 42 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6049d3766c64..4ed21dad6a8e 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -643,9 +643,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
static void ath9k_hif_usb_rx_cb(struct urb *urb)
{
- struct sk_buff *skb = (struct sk_buff *) urb->context;
- struct hif_device_usb *hif_dev =
- usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+ struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+ struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+ struct sk_buff *skb = rx_buf->skb;
int ret;
if (!skb)
@@ -685,14 +685,15 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb)
return;
free:
kfree_skb(skb);
+ kfree(rx_buf);
}
static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
{
- struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+ struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+ struct sk_buff *skb = rx_buf->skb;
struct sk_buff *nskb;
- struct hif_device_usb *hif_dev =
- usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
int ret;
if (!skb)
@@ -750,6 +751,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
return;
free:
kfree_skb(skb);
+ kfree(rx_buf);
urb->context = NULL;
}
@@ -795,7 +797,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev)
init_usb_anchor(&hif_dev->mgmt_submitted);
for (i = 0; i < MAX_TX_URB_NUM; i++) {
- tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+ tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
if (!tx_buf)
goto err;
@@ -832,8 +834,9 @@ static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev)
static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
{
- struct urb *urb = NULL;
+ struct rx_buf *rx_buf = NULL;
struct sk_buff *skb = NULL;
+ struct urb *urb = NULL;
int i, ret;
init_usb_anchor(&hif_dev->rx_submitted);
@@ -841,6 +844,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
for (i = 0; i < MAX_RX_URB_NUM; i++) {
+ rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+ if (!rx_buf) {
+ ret = -ENOMEM;
+ goto err_rxb;
+ }
+
/* Allocate URB */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL) {
@@ -855,11 +864,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
goto err_skb;
}
+ rx_buf->hif_dev = hif_dev;
+ rx_buf->skb = skb;
+
usb_fill_bulk_urb(urb, hif_dev->udev,
usb_rcvbulkpipe(hif_dev->udev,
USB_WLAN_RX_PIPE),
skb->data, MAX_RX_BUF_SIZE,
- ath9k_hif_usb_rx_cb, skb);
+ ath9k_hif_usb_rx_cb, rx_buf);
/* Anchor URB */
usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -885,6 +897,8 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
err_skb:
usb_free_urb(urb);
err_urb:
+ kfree(rx_buf);
+err_rxb:
ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
return ret;
}
@@ -896,14 +910,21 @@ static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)
static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
{
- struct urb *urb = NULL;
+ struct rx_buf *rx_buf = NULL;
struct sk_buff *skb = NULL;
+ struct urb *urb = NULL;
int i, ret;
init_usb_anchor(&hif_dev->reg_in_submitted);
for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
+ rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+ if (!rx_buf) {
+ ret = -ENOMEM;
+ goto err_rxb;
+ }
+
/* Allocate URB */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL) {
@@ -918,11 +939,14 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
goto err_skb;
}
+ rx_buf->hif_dev = hif_dev;
+ rx_buf->skb = skb;
+
usb_fill_int_urb(urb, hif_dev->udev,
usb_rcvintpipe(hif_dev->udev,
USB_REG_IN_PIPE),
skb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, skb, 1);
+ ath9k_hif_usb_reg_in_cb, rx_buf, 1);
/* Anchor URB */
usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -948,6 +972,8 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
err_skb:
usb_free_urb(urb);
err_urb:
+ kfree(rx_buf);
+err_rxb:
ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
return ret;
}
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index a94e7e1c86e9..5985aa15ca93 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -86,6 +86,11 @@ struct tx_buf {
struct list_head list;
};
+struct rx_buf {
+ struct sk_buff *skb;
+ struct hif_device_usb *hif_dev;
+};
+
#define HIF_USB_TX_STOP BIT(0)
#define HIF_USB_TX_FLUSH BIT(1)
--
2.25.1
next prev parent reply other threads:[~2020-06-09 1:01 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200608230607.3361041-1-sashal@kernel.org>
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 002/274] ath10k: Fix the race condition in firmware dump work queue Sasha Levin
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 003/274] ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb Sasha Levin
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 004/274] ath9k: Fix use-after-free Write in ath9k_htc_rx_msg Sasha Levin
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 005/274] ath9k: Fix use-after-free Read in htc_connect_service Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 031/274] ath10k: remove the max_sched_scan_reqs value Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 035/274] rtw88: fix an issue about leak system resources Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 044/274] mt76: mt7615: fix aid configuration in mt7615_mcu_wtbl_generic_tlv Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 058/274] ath11k: Fix some resource leaks in error path in 'ath11k_thermal_register()' Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 089/274] ath11k: fix error message to correctly report the command that failed Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 091/274] ath11k: Avoid mgmt tx count underflow Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 092/274] ath10k: fix kernel null pointer dereference Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 093/274] ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rx Sasha Levin
2020-06-08 23:03 ` Sasha Levin [this message]
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 099/274] brcmfmac: fix wrong location to get firmware feature Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 113/274] ath10k: add flush tx packets for SDIO chip Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 125/274] ath11k: use GFP_ATOMIC under spin lock Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 156/274] ath10k: fix possible memory leak in ath10k_bmi_lz_data_large() Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 157/274] ath11k: fix error return code in ath11k_dp_alloc() Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 162/274] ath11k: fix kernel panic by freeing the msdu received with invalid length Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 163/274] ath9k_htc: Silence undersized packet warnings Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 164/274] libertas_tf: avoid a null dereference in pointer priv Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 179/274] iwlwifi: avoid debug max amsdu config overwriting itself Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 184/274] ath10k: Skip handling del_server during driver exit Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 185/274] ath10k: Remove msdu from idr when management pkt send fails Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 186/274] wcn36xx: Fix error handling path in 'wcn36xx_probe()' Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 190/274] mt76: mt7663: fix mt7615_mac_cca_stats_reset routine Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 191/274] mt76: mt7615: do not always reset the dfs state setting the channel Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 192/274] mt76: mt7622: fix DMA unmap length Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 193/274] mt76: mt7663: " Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 194/274] mt76: mt7615: fix mt7615_firmware_own for mt7663e Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 195/274] mt76: mt7615: fix mt7615_driver_own routine Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 196/274] mt76: avoid rx reorder buffer overflow Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 198/274] brcmfmac: fix WPA/WPA2-PSK 4-way handshake offload and SAE offload failures Sasha Levin
2020-06-08 23:05 ` [PATCH AUTOSEL 5.7 210/274] rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup() Sasha Levin
2020-06-08 23:05 ` [PATCH AUTOSEL 5.7 211/274] mwifiex: Fix memory corruption in dump_station Sasha Levin
2020-06-08 23:05 ` [PATCH AUTOSEL 5.7 253/274] iwlwifi: mvm: fix aux station leak Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200608230607.3361041-94-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=hqjagain@gmail.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).