From: John Crispin <john@phrozen.org>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
John Crispin <john@phrozen.org>
Subject: [PATCH V3 6/9] ath11k: add the multiple bssid WMI commands
Date: Wed, 12 Aug 2020 17:00:47 +0200 [thread overview]
Message-ID: <20200812150050.2683396-7-john@phrozen.org> (raw)
In-Reply-To: <20200812150050.2683396-1-john@phrozen.org>
Add the code to pass the BSS specific multiple bssid info to the FW.
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/wireless/ath/ath11k/wmi.c | 3 +++
drivers/net/wireless/ath/ath11k/wmi.h | 10 ++++++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 04ef73d1f032..ffe8d7b1320b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -641,6 +641,8 @@ int ath11k_wmi_vdev_create(struct ath11k *ar, u8 *macaddr,
cmd->vdev_subtype = param->subtype;
cmd->num_cfg_txrx_streams = WMI_NUM_SUPPORTED_BAND_MAX;
cmd->pdev_id = param->pdev_id;
+ cmd->flags = param->flags;
+ cmd->vdevid_trans = param->vdevid_trans;
ether_addr_copy(cmd->vdev_macaddr.addr, macaddr);
ptr = skb->data + sizeof(*cmd);
@@ -1603,6 +1605,7 @@ int ath11k_wmi_bcn_tmpl(struct ath11k *ar, u32 vdev_id,
cmd->csa_switch_count_offset = offs->cntdwn_counter_offs[0];
cmd->ext_csa_switch_count_offset = offs->cntdwn_counter_offs[1];
cmd->buf_len = bcn->len;
+ cmd->mbssid_ie_offset = offs->multiple_bssid_offset;
ptr = skb->data + sizeof(*cmd);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index a2d81abf6356..ad741add1ebe 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -119,6 +119,12 @@ enum {
WMI_HOST_WLAN_2G_5G_CAP = 0x3,
};
+enum {
+ WMI_HOST_VDEV_FLAGS_NON_MBSSID_AP = 1,
+ WMI_HOST_VDEV_FLAGS_TRANSMIT_AP = 2,
+ WMI_HOST_VDEV_FLAGS_NON_TRANSMIT_AP = 4,
+};
+
/*
* wmi command groups.
*/
@@ -2456,6 +2462,8 @@ struct vdev_create_params {
u8 rx;
} chains[NUM_NL80211_BANDS];
u32 pdev_id;
+ u32 flags;
+ u32 vdevid_trans;
};
struct wmi_vdev_create_cmd {
@@ -2466,6 +2474,8 @@ struct wmi_vdev_create_cmd {
struct wmi_mac_addr vdev_macaddr;
u32 num_cfg_txrx_streams;
u32 pdev_id;
+ u32 flags;
+ u32 vdevid_trans;
} __packed;
struct wmi_vdev_txrx_streams {
--
2.25.1
next prev parent reply other threads:[~2020-08-12 15:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-12 15:00 [PATCH V3 0/9] mac80211: add multiple bssid / EMA John Crispin
2020-08-12 15:00 ` [PATCH V3 1/9] nl80211: add basic multiple bssid support John Crispin
2020-08-19 2:48 ` Aloka Dixit
2020-08-27 12:58 ` Johannes Berg
2020-08-12 15:00 ` [PATCH V3 2/9] mac80211: add multiple bssid support to interface handling John Crispin
2020-08-27 13:03 ` Johannes Berg
2020-08-27 13:08 ` Johannes Berg
2020-10-08 0:33 ` Pradeep Kumar Chitrapu
2020-10-08 8:06 ` John Crispin
2020-10-08 17:21 ` Pradeep Kumar Chitrapu
2020-10-08 19:42 ` John Crispin
2020-08-12 15:00 ` [PATCH V3 3/9] mac80211: add multiple bssid support to beacon handling John Crispin
2020-08-12 15:00 ` [PATCH V3 4/9] mac80211: add multiple bssid/ema support to bcn templating John Crispin
2020-08-27 13:10 ` Johannes Berg
2020-08-28 3:20 ` Aloka Dixit
2020-08-12 15:00 ` [PATCH V3 5/9] ath11k: add a struct to pass parameters into ath11k_wmi_vdev_up John Crispin
2020-08-12 15:00 ` John Crispin [this message]
2020-08-12 15:00 ` [PATCH V3 7/9] ath11k: add multiple bssid support to device creation John Crispin
2020-08-12 15:00 ` [PATCH V3 8/9] ath11k: add EMA beacon support John Crispin
2020-08-12 15:00 ` [PATCH V3 9/9] ath11k: set the multiple bssid hw flags and capabilities John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200812150050.2683396-7-john@phrozen.org \
--to=john@phrozen.org \
--cc=ath11k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).