[PATCH 00/22] add initial S1G support

[PATCH 00/22] add initial S1G support

[Thomas Pedersen]

This is the initial 802.11ah (S1G) patchset which adds support for:

- defining the S1G 900MHz bands in a custom regulatory database
- setting and receiving S1G beacons (sending short beacons will be
  supported in a future patch)
- configuring S1G capabilities in Association Request (setting
  capabilities along with NL80211_CMD_SET_STATION will be added later).
- scanning on S1G bands
- handling S1G Association Response format
- correctly encoding Listen Interval for S1G
- associating in mac80211
- S1G in mac80211_hwsim

Rate control is still TBD, this patchset simply lops off the rate
control hooks for S1G so eg. missing sband->bitrates and S1G Basic Rate
set can't do too much damage.

Note the mac80211_hwsim S1G support introduces a regression in a few
hostap hwsim tests. This is because when processing the reported bands,
hostap assumes freq < 4000 is 11b, and the actual 11b/g band is
overwritten by the S1G band info. Though it does count as a userspace
regression, I'm not sure there is much to do about it besides apply a
small patch to hostapd which treats freq < 2000 as an unknown band.

After the hostap workaround (https://p.ibsgaard.io/raw/xaweyacunu),
these patches continue to pass the hwsim tests as well as HEAD.

Thomas Pedersen (22):
  nl80211: advertise supported channel width in S1G
  cfg80211: regulatory: pass min. bandwidth to regulatory rule extractor
  cfg80211: regulatory: handle S1G channels
  nl80211: correctly validate S1G beacon head
  nl80211: support setting S1G channels
  {cfg,mac}80211: get correct default channel width for S1G
  mac80211: s1g: choose scanning width based on frequency
  nl80211: support S1G capabilities
  mac80211: support S1G STA capabilities
  cfg80211: convert S1G beacon to scan results
  cfg80211: parse S1G Operation element for BSS channel
  mac80211: convert S1G beacon to scan results
  cfg80211: handle Association Response from S1G STA
  mac80211: encode listen interval for S1G
  mac80211: don't calculate duration for S1G
  mac80211: handle S1G low rates
  mac80211: avoid rate init for S1G band
  mac80211: receive and process S1G beacons
  mac80211: support S1G association
  nl80211: include frequency offset in survey info
  mac80211_hwsim: indicate support for S1G
  mac80211_hwsim: fix TSF timestamp write to S1G beacon

 drivers/net/wireless/ath/regd.c               |   2 +-
 .../broadcom/brcm80211/brcmsmac/channel.c     |   3 +-
 drivers/net/wireless/mac80211_hwsim.c         |  93 +++++++-
 drivers/net/wireless/realtek/rtlwifi/regd.c   |   7 +-
 include/linux/ieee80211.h                     |  82 ++++++-
 include/net/cfg80211.h                        |  31 ++-
 include/net/mac80211.h                        |   3 +
 include/uapi/linux/nl80211.h                  |  26 +++
 net/mac80211/cfg.c                            |   2 +
 net/mac80211/chan.c                           |   9 +-
 net/mac80211/ibss.c                           |   3 +-
 net/mac80211/ieee80211_i.h                    |  20 ++
 net/mac80211/iface.c                          |   5 +
 net/mac80211/mlme.c                           | 184 +++++++++++++---
 net/mac80211/rate.c                           |  39 +++-
 net/mac80211/rx.c                             |  87 ++++----
 net/mac80211/scan.c                           |  37 +++-
 net/mac80211/tx.c                             |   4 +
 net/mac80211/util.c                           | 207 +++++++++++++++++-
 net/wireless/chan.c                           | 140 +++++++-----
 net/wireless/mlme.c                           |  20 ++
 net/wireless/nl80211.c                        |  56 ++++-
 net/wireless/reg.c                            |  74 +++++--
 net/wireless/scan.c                           |  80 +++++--
 net/wireless/util.c                           |  32 +++
 25 files changed, 1046 insertions(+), 200 deletions(-)

-- 
2.20.1

[PATCH 01/22] nl80211: advertise supported channel width in S1G

[Thomas Pedersen]

S1G supports 5 channel widths: 1, 2, 4, 8, and 16. One
channel width is allowed per frequency in each operating
class, so it makes more sense to advertise the specific
channel width allowed.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/cfg80211.h       | 15 +++++++++++++++
 include/uapi/linux/nl80211.h | 15 +++++++++++++++
 net/wireless/nl80211.c       | 15 +++++++++++++++
 3 files changed, 45 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d9e6b9fbd95b..3db0444086e2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -96,6 +96,16 @@ struct wiphy;
  * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted
  *	on this channel.
  * @IEEE80211_CHAN_NO_HE: HE operation is not permitted on this channel.
+ * @IEEE80211_CHAN_1MHZ: 1 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_2MHZ: 2 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_4MHZ: 4 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_8MHZ: 8 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_16MHZ: 16 MHz bandwidth is permitted
+ *	on this channel.
  *
  */
 enum ieee80211_channel_flags {
@@ -113,6 +123,11 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_NO_20MHZ		= 1<<11,
 	IEEE80211_CHAN_NO_10MHZ		= 1<<12,
 	IEEE80211_CHAN_NO_HE		= 1<<13,
+	IEEE80211_CHAN_1MHZ		= 1<<14,
+	IEEE80211_CHAN_2MHZ		= 1<<15,
+	IEEE80211_CHAN_4MHZ		= 1<<16,
+	IEEE80211_CHAN_8MHZ		= 1<<17,
+	IEEE80211_CHAN_16MHZ		= 1<<18,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 631f3a997b3c..00ac24f2e293 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3725,6 +3725,16 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
+ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
+ *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3756,6 +3766,11 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_WMM,
 	NL80211_FREQUENCY_ATTR_NO_HE,
 	NL80211_FREQUENCY_ATTR_OFFSET,
+	NL80211_FREQUENCY_ATTR_1MHZ,
+	NL80211_FREQUENCY_ATTR_2MHZ,
+	NL80211_FREQUENCY_ATTR_4MHZ,
+	NL80211_FREQUENCY_ATTR_8MHZ,
+	NL80211_FREQUENCY_ATTR_16MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 0ce6237c9de1..5aded5de35cd 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -990,6 +990,21 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
 		if ((chan->flags & IEEE80211_CHAN_NO_HE) &&
 		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HE))
 			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_1MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_1MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_2MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_2MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_4MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_4MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_8MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_8MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_16MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_16MHZ))
+			goto nla_put_failure;
 	}
 
 	if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-- 
2.20.1

[PATCH 02/22] cfg80211: regulatory: pass min. bandwidth to regulatory rule extractor

[Thomas Pedersen]

The regulatory code assumed 20Mhz is the minimum channel
bandwidth supported. Make this a parameter so S1G code can
pass smaller bandwidths.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 drivers/net/wireless/ath/regd.c                            | 2 +-
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c | 3 ++-
 drivers/net/wireless/realtek/rtlwifi/regd.c                | 7 ++++---
 include/net/cfg80211.h                                     | 3 ++-
 net/mac80211/util.c                                        | 2 +-
 net/wireless/nl80211.c                                     | 3 ++-
 net/wireless/reg.c                                         | 7 ++++---
 7 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index bee9110b91f3..f9c9ac16d2da 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -268,7 +268,7 @@ static void ath_force_clear_no_ir_chan(struct wiphy *wiphy,
 {
 	const struct ieee80211_reg_rule *reg_rule;
 
-	reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq));
+	reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq), 20);
 	if (IS_ERR(reg_rule))
 		return;
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
index 5a6d9c86552a..d85b2707e2fa 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/channel.c
@@ -677,7 +677,8 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy,
 
 			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
 				rule = freq_reg_info(wiphy,
-						     MHZ_TO_KHZ(ch->center_freq));
+						MHZ_TO_KHZ(ch->center_freq),
+						20);
 				if (IS_ERR(rule))
 					continue;
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/regd.c b/drivers/net/wireless/realtek/rtlwifi/regd.c
index 8be31e0ad878..3f9dd4941bb1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/regd.c
+++ b/drivers/net/wireless/realtek/rtlwifi/regd.c
@@ -151,7 +151,8 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy,
 				continue;
 			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
 				reg_rule = freq_reg_info(wiphy,
-							 ch->center_freq);
+							 ch->center_freq,
+							 20);
 				if (IS_ERR(reg_rule))
 					continue;
 				/*
@@ -213,7 +214,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
 	 */
 
 	ch = &sband->channels[11];	/* CH 12 */
-	reg_rule = freq_reg_info(wiphy, ch->center_freq);
+	reg_rule = freq_reg_info(wiphy, ch->center_freq, 20);
 	if (!IS_ERR(reg_rule)) {
 		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
 			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -221,7 +222,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
 	}
 
 	ch = &sband->channels[12];	/* CH 13 */
-	reg_rule = freq_reg_info(wiphy, ch->center_freq);
+	reg_rule = freq_reg_info(wiphy, ch->center_freq, 20);
 	if (!IS_ERR(reg_rule)) {
 		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
 			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3db0444086e2..2c737d6be9a1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5862,6 +5862,7 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
  * freq_reg_info - get regulatory information for the given frequency
  * @wiphy: the wiphy for which we want to process this rule for
  * @center_freq: Frequency in KHz for which we want regulatory information for
+ * @min_bw: Minimum channel bandwidth in MHz for which we want regulatory information for
  *
  * Use this function to get the regulatory rule for a specific frequency on
  * a given wireless device. If the device has a specific regulatory domain
@@ -5877,7 +5878,7 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
  * purely subjective and right now it's 802.11 specific.
  */
 const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
-					       u32 center_freq);
+					       u32 center_freq, u32 min_bw);
 
 /**
  * reg_initiator_name - map regulatory request initiator enum to name
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index c8504ffc71a1..9ba1afe4ba1f 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1453,7 +1453,7 @@ void ieee80211_regulatory_limit_wmm_params(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 
-	rrule = freq_reg_info(sdata->wdev.wiphy, MHZ_TO_KHZ(center_freq));
+	rrule = freq_reg_info(sdata->wdev.wiphy, MHZ_TO_KHZ(center_freq), 20);
 
 	if (IS_ERR_OR_NULL(rrule) || !rrule->has_wmm) {
 		rcu_read_unlock();
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5aded5de35cd..dd0f62e942ed 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1013,7 +1013,8 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
 
 	if (large) {
 		const struct ieee80211_reg_rule *rule =
-			freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq));
+			freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
+				      20);
 
 		if (!IS_ERR_OR_NULL(rule) && rule->has_wmm) {
 			if (nl80211_msg_put_wmm_rules(msg, rule))
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 35b8847a2f6d..6c130cec22c3 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1629,9 +1629,10 @@ __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
 }
 
 const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
-					       u32 center_freq)
+					       u32 center_freq,
+					       u32 min_bw)
 {
-	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20));
+	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(min_bw));
 }
 EXPORT_SYMBOL(freq_reg_info);
 
@@ -1711,7 +1712,7 @@ static void handle_channel(struct wiphy *wiphy,
 
 	flags = chan->orig_flags;
 
-	reg_rule = freq_reg_info(wiphy, ieee80211_channel_to_khz(chan));
+	reg_rule = freq_reg_info(wiphy, ieee80211_channel_to_khz(chan), 20);
 	if (IS_ERR(reg_rule)) {
 		/*
 		 * We will disable all channels that do not match our
-- 
2.20.1

[PATCH 03/22] cfg80211: regulatory: handle S1G channels

[Thomas Pedersen]

S1G channels have a minimum bandwidth of 1Mhz, and there
is a 1:1 mapping of allowed bandwidth to channel number.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/util.c    |  6 ++--
 net/wireless/nl80211.c |  3 +-
 net/wireless/reg.c     | 69 ++++++++++++++++++++++++++++++++++--------
 3 files changed, 63 insertions(+), 15 deletions(-)

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 9ba1afe4ba1f..35798997e521 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1437,7 +1437,7 @@ void ieee80211_regulatory_limit_wmm_params(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	const struct ieee80211_reg_rule *rrule;
 	const struct ieee80211_wmm_ac *wmm_ac;
-	u16 center_freq = 0;
+	u16 min_bw, center_freq = 0;
 
 	if (sdata->vif.type != NL80211_IFTYPE_AP &&
 	    sdata->vif.type != NL80211_IFTYPE_STATION)
@@ -1453,7 +1453,9 @@ void ieee80211_regulatory_limit_wmm_params(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 
-	rrule = freq_reg_info(sdata->wdev.wiphy, MHZ_TO_KHZ(center_freq), 20);
+	min_bw = chanctx_conf->def.chan->band == NL80211_BAND_S1GHZ ? 1 : 20;
+	rrule = freq_reg_info(sdata->wdev.wiphy, MHZ_TO_KHZ(center_freq),
+			      min_bw);
 
 	if (IS_ERR_OR_NULL(rrule) || !rrule->has_wmm) {
 		rcu_read_unlock();
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index dd0f62e942ed..a57872708108 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1012,9 +1012,10 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
 		goto nla_put_failure;
 
 	if (large) {
+		u32 min_bw = chan->band == NL80211_BAND_S1GHZ ? 1 : 20;
 		const struct ieee80211_reg_rule *rule =
 			freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
-				      20);
+				      min_bw);
 
 		if (!IS_ERR_OR_NULL(rule) && rule->has_wmm) {
 			if (nl80211_msg_put_wmm_rules(msg, rule))
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6c130cec22c3..f23ca3103558 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1617,9 +1617,11 @@ __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
 {
 	const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy);
 	const struct ieee80211_reg_rule *reg_rule = NULL;
+	const u32 bws[] = {1, 2, 4, 5, 8, 10, 16, 20};
+	int i = sizeof(bws) / sizeof(u32) - 1;
 	u32 bw;
 
-	for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
+	for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) {
 		reg_rule = freq_reg_info_regd(center_freq, regd, bw);
 		if (!IS_ERR(reg_rule))
 			return reg_rule;
@@ -1660,6 +1662,7 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 {
 	const struct ieee80211_freq_range *freq_range = NULL;
 	u32 max_bandwidth_khz, center_freq_khz, bw_flags = 0;
+	bool is_s1g = chan->band == NL80211_BAND_S1GHZ;
 
 	freq_range = &reg_rule->freq_range;
 
@@ -1679,16 +1682,57 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 					MHZ_TO_KHZ(20)))
 		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags |= IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
-		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
-		bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+	if (is_s1g) {
+		/* S1G is strict about non overlapping channels. We can
+		 * calculate which bandwidth is allowed per channel by finding
+		 * the largest bandwidth which cleanly divides the freq_range.
+		 */
+		int edge_offset;
+		int ch_bw = max_bandwidth_khz;
+
+		while (ch_bw) {
+			edge_offset = (center_freq_khz - ch_bw / 2) -
+				      freq_range->start_freq_khz;
+			if (edge_offset % ch_bw == 0) {
+				switch (KHZ_TO_MHZ(ch_bw)) {
+				case 1:
+					bw_flags |= IEEE80211_CHAN_1MHZ;
+					break;
+				case 2:
+					bw_flags |= IEEE80211_CHAN_2MHZ;
+					break;
+				case 4:
+					bw_flags |= IEEE80211_CHAN_4MHZ;
+					break;
+				case 8:
+					bw_flags |= IEEE80211_CHAN_8MHZ;
+					break;
+				case 16:
+					bw_flags |= IEEE80211_CHAN_16MHZ;
+					break;
+				default:
+					/* If we got here, no bandwidths fit on
+					 * this frequency, ie. band edge.
+					 */
+					bw_flags |= IEEE80211_CHAN_DISABLED;
+					break;
+				}
+				break;
+			}
+			ch_bw /= 2;
+		}
+	} else {
+		if (max_bandwidth_khz < MHZ_TO_KHZ(10))
+			bw_flags |= IEEE80211_CHAN_NO_10MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(20))
+			bw_flags |= IEEE80211_CHAN_NO_20MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(40))
+			bw_flags |= IEEE80211_CHAN_NO_HT40;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(80))
+			bw_flags |= IEEE80211_CHAN_NO_80MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(160))
+			bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+	}
 	return bw_flags;
 }
 
@@ -1707,12 +1751,13 @@ static void handle_channel(struct wiphy *wiphy,
 	struct wiphy *request_wiphy = NULL;
 	struct regulatory_request *lr = get_last_request();
 	const struct ieee80211_regdomain *regd;
+	u32 min_bw = chan->band == NL80211_BAND_S1GHZ ? 1 : 20;
 
 	request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx);
 
 	flags = chan->orig_flags;
 
-	reg_rule = freq_reg_info(wiphy, ieee80211_channel_to_khz(chan), 20);
+	reg_rule = freq_reg_info(wiphy, ieee80211_channel_to_khz(chan), min_bw);
 	if (IS_ERR(reg_rule)) {
 		/*
 		 * We will disable all channels that do not match our
-- 
2.20.1

[PATCH 04/22] nl80211: correctly validate S1G beacon head

[Thomas Pedersen]

The S1G beacon has a different header size than regular
beacons, so adjust the beacon head validator.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/wireless/nl80211.c | 16 +++++++++++++---
 net/wireless/util.c    |  5 +++++
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index a57872708108..c5950d154d66 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -209,14 +209,24 @@ static int validate_beacon_head(const struct nlattr *attr,
 	unsigned int len = nla_len(attr);
 	const struct element *elem;
 	const struct ieee80211_mgmt *mgmt = (void *)data;
-	unsigned int fixedlen = offsetof(struct ieee80211_mgmt,
-					 u.beacon.variable);
+	bool s1g_bcn = ieee80211_is_s1g_beacon(mgmt->frame_control);
+	unsigned int fixedlen, hdrlen;
+
+	if (s1g_bcn) {
+		fixedlen = offsetof(struct ieee80211_ext,
+				    u.s1g_beacon.variable);
+		hdrlen = offsetof(struct ieee80211_ext, u.s1g_beacon);
+	} else {
+		fixedlen = offsetof(struct ieee80211_mgmt,
+				    u.beacon.variable);
+		hdrlen = offsetof(struct ieee80211_mgmt, u.beacon);
+	}
 
 	if (len < fixedlen)
 		goto err;
 
 	if (ieee80211_hdrlen(mgmt->frame_control) !=
-	    offsetof(struct ieee80211_mgmt, u.beacon))
+	    hdrlen)
 		goto err;
 
 	data += fixedlen;
diff --git a/net/wireless/util.c b/net/wireless/util.c
index dfad1c0f57ad..383278c05a75 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -397,6 +397,11 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc)
 {
 	unsigned int hdrlen = 24;
 
+	if (ieee80211_is_ext(fc)) {
+		hdrlen = 4;
+		goto out;
+	}
+
 	if (ieee80211_is_data(fc)) {
 		if (ieee80211_has_a4(fc))
 			hdrlen = 30;
-- 
2.20.1

[PATCH 05/22] nl80211: support setting S1G channels

[Thomas Pedersen]

S1G channels have a single width defined per frequency, so
derive it from the channel flags with
ieee80211_s1g_channel_width().

Also support setting an S1G channel where control frequency may
differ from operating, and add some basic validation to
ensure the control channel is with the operating.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/cfg80211.h |  10 ++++
 net/wireless/chan.c    | 130 ++++++++++++++++++++++++-----------------
 net/wireless/util.c    |  27 +++++++++
 3 files changed, 115 insertions(+), 52 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2c737d6be9a1..f44839823d1e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5290,6 +5290,16 @@ ieee80211_channel_to_khz(const struct ieee80211_channel *chan)
 	return MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset;
 }
 
+/**
+ * ieee80211_s1g_channel_width - get allowed channel width from @chan
+ *
+ * Only allowed for band NL80211_BAND_S1GHZ
+ * @chan: channel
+ * Return: The allowed channel width for this center_freq
+ */
+enum nl80211_chan_width
+ieee80211_s1g_channel_width(const struct ieee80211_channel *chan);
+
 /**
  * ieee80211_channel_to_freq_khz - convert channel number to frequency
  * @chan: channel number
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 90f0f82cd9ca..0a4b8d3eaed9 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -140,9 +140,62 @@ static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
 	return true;
 }
 
+static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width)
+{
+	int mhz;
+
+	switch (chan_width) {
+	case NL80211_CHAN_WIDTH_1:
+		mhz = 1;
+		break;
+	case NL80211_CHAN_WIDTH_2:
+		mhz = 2;
+		break;
+	case NL80211_CHAN_WIDTH_4:
+		mhz = 4;
+		break;
+	case NL80211_CHAN_WIDTH_8:
+		mhz = 8;
+		break;
+	case NL80211_CHAN_WIDTH_16:
+		mhz = 16;
+		break;
+	case NL80211_CHAN_WIDTH_5:
+		mhz = 5;
+		break;
+	case NL80211_CHAN_WIDTH_10:
+		mhz = 10;
+		break;
+	case NL80211_CHAN_WIDTH_20:
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		mhz = 20;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		mhz = 40;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+	case NL80211_CHAN_WIDTH_80:
+		mhz = 80;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		mhz = 160;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return -1;
+	}
+	return mhz;
+}
+
+static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
+{
+	return nl80211_chan_width_to_mhz(c->width);
+}
+
 bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 {
-	u32 control_freq;
+	u32 control_freq, oper_freq;
+	int oper_width, control_width;
 
 	if (!chandef->chan)
 		return false;
@@ -154,10 +207,6 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 
 	switch (chandef->width) {
 	case NL80211_CHAN_WIDTH_1:
-	case NL80211_CHAN_WIDTH_2:
-	case NL80211_CHAN_WIDTH_4:
-	case NL80211_CHAN_WIDTH_8:
-	case NL80211_CHAN_WIDTH_16:
 	case NL80211_CHAN_WIDTH_5:
 	case NL80211_CHAN_WIDTH_10:
 	case NL80211_CHAN_WIDTH_20:
@@ -168,6 +217,30 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 		if (chandef->center_freq2)
 			return false;
 		break;
+	case NL80211_CHAN_WIDTH_2:
+	case NL80211_CHAN_WIDTH_4:
+	case NL80211_CHAN_WIDTH_8:
+	case NL80211_CHAN_WIDTH_16:
+		control_freq = ieee80211_channel_to_khz(chandef->chan);
+		oper_freq = ieee80211_chandef_to_khz(chandef);
+		control_width = nl80211_chan_width_to_mhz(
+					ieee80211_s1g_channel_width(
+								chandef->chan));
+		oper_width = cfg80211_chandef_get_width(chandef);
+
+		if (oper_width < 0 || control_width < 0)
+			return false;
+		if (chandef->center_freq2)
+			return false;
+
+		if (control_freq + MHZ_TO_KHZ(control_width) / 2 >
+		    oper_freq + MHZ_TO_KHZ(oper_width) / 2)
+			return false;
+
+		if (control_freq - MHZ_TO_KHZ(control_width) / 2 <
+		    oper_freq - MHZ_TO_KHZ(oper_width) / 2)
+			return false;
+		break;
 	case NL80211_CHAN_WIDTH_40:
 		if (chandef->center_freq1 != control_freq + 10 &&
 		    chandef->center_freq1 != control_freq - 10)
@@ -263,53 +336,6 @@ static void chandef_primary_freqs(const struct cfg80211_chan_def *c,
 	}
 }
 
-static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
-{
-	int width;
-
-	switch (c->width) {
-	case NL80211_CHAN_WIDTH_1:
-		width = 1;
-		break;
-	case NL80211_CHAN_WIDTH_2:
-		width = 2;
-		break;
-	case NL80211_CHAN_WIDTH_4:
-		width = 4;
-		break;
-	case NL80211_CHAN_WIDTH_8:
-		width = 8;
-		break;
-	case NL80211_CHAN_WIDTH_16:
-		width = 16;
-		break;
-	case NL80211_CHAN_WIDTH_5:
-		width = 5;
-		break;
-	case NL80211_CHAN_WIDTH_10:
-		width = 10;
-		break;
-	case NL80211_CHAN_WIDTH_20:
-	case NL80211_CHAN_WIDTH_20_NOHT:
-		width = 20;
-		break;
-	case NL80211_CHAN_WIDTH_40:
-		width = 40;
-		break;
-	case NL80211_CHAN_WIDTH_80P80:
-	case NL80211_CHAN_WIDTH_80:
-		width = 80;
-		break;
-	case NL80211_CHAN_WIDTH_160:
-		width = 160;
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		return -1;
-	}
-	return width;
-}
-
 const struct cfg80211_chan_def *
 cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
 			    const struct cfg80211_chan_def *c2)
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 383278c05a75..91ffb5132501 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -111,6 +111,33 @@ u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band)
 }
 EXPORT_SYMBOL(ieee80211_channel_to_freq_khz);
 
+enum nl80211_chan_width
+ieee80211_s1g_channel_width(const struct ieee80211_channel *chan)
+{
+	if (WARN_ON(!chan || chan->band != NL80211_BAND_S1GHZ))
+		return NL80211_CHAN_WIDTH_20_NOHT;
+
+	/*S1G defines a single allowed channel width per channel.
+	 * Extract that width here.
+	 */
+	if (chan->flags & IEEE80211_CHAN_1MHZ)
+		return NL80211_CHAN_WIDTH_1;
+	else if (chan->flags & IEEE80211_CHAN_2MHZ)
+		return NL80211_CHAN_WIDTH_2;
+	else if (chan->flags & IEEE80211_CHAN_4MHZ)
+		return NL80211_CHAN_WIDTH_4;
+	else if (chan->flags & IEEE80211_CHAN_8MHZ)
+		return NL80211_CHAN_WIDTH_8;
+	else if (chan->flags & IEEE80211_CHAN_16MHZ)
+		return NL80211_CHAN_WIDTH_16;
+
+	pr_err("unknown channel width for channel at %dKHz?\n",
+	       ieee80211_channel_to_khz(chan));
+
+	return NL80211_CHAN_WIDTH_1;
+}
+EXPORT_SYMBOL(ieee80211_s1g_channel_width);
+
 int ieee80211_freq_khz_to_channel(u32 freq)
 {
 	/* TODO: just handle MHz for now */
-- 
2.20.1

[PATCH 06/22] {cfg,mac}80211: get correct default channel width for S1G

[Thomas Pedersen]

Until now, the wifi default channels were assumed to be
NL80211_CHAN_NO_HT, or NL80211_CHAN_WIDTH_20_NOHT. S1G
devices however do not support these channel types/width.
When a default channel width is requested (during default
chandef init, or chanctx removal when not using channel
context), for S1G calculate the correct width. Fixes eg.
configuring strange (20Mhz) width during a scan on the S1G
band.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/chan.c |  9 ++++++++-
 net/wireless/chan.c | 10 ++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index bdc0f29dc6cd..8f48aff74c7b 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -536,7 +536,14 @@ static void ieee80211_del_chanctx(struct ieee80211_local *local,
 
 	if (!local->use_chanctx) {
 		struct cfg80211_chan_def *chandef = &local->_oper_chandef;
-		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+		/* S1G doesn't have 20MHz, so get the correct width for the
+		 * current channel.
+		 */
+		if (chandef->chan->band == NL80211_BAND_S1GHZ)
+			chandef->width =
+				ieee80211_s1g_channel_width(chandef->chan);
+		else
+			chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 		chandef->center_freq1 = chandef->chan->center_freq;
 		chandef->freq1_offset = chandef->chan->freq_offset;
 		chandef->center_freq2 = 0;
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 0a4b8d3eaed9..3bff52d51b05 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -32,6 +32,16 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
 	chandef->edmg.bw_config = 0;
 	chandef->edmg.channels = 0;
 
+	/* S1G allows a single width per channel, and since chan_type seems to
+	 * be for backwards compatibility only, ignore it and return the per
+	 * frequency width.
+	 */
+	if (chan->band == NL80211_BAND_S1GHZ) {
+		chandef->width = ieee80211_s1g_channel_width(chan);
+		chandef->center_freq1 = chan->center_freq;
+		return;
+	}
+
 	switch (chan_type) {
 	case NL80211_CHAN_NO_HT:
 		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
-- 
2.20.1

[PATCH 07/22] mac80211: s1g: choose scanning width based on frequency

[Thomas Pedersen]

An S1G BSS can beacon at either 1 or 2 MHz and the channel
width is unique to a given frequency. Ignore scan channel
width for now and use the allowed channel width.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/scan.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5ac2785cdc7b..5002791fe165 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -905,6 +905,17 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 	local->scan_chandef.center_freq1 = chan->center_freq;
 	local->scan_chandef.freq1_offset = chan->freq_offset;
 	local->scan_chandef.center_freq2 = 0;
+
+	/* For scanning on the S1G band, ignore scan_width (which is constant
+	 * across all channels) for now since channel width is specific to each
+	 * channel. Detect the required channel width here and likely revisit
+	 * later. Maybe scan_width could be used to build the channel scan list?
+	 */
+	if (chan->band == NL80211_BAND_S1GHZ) {
+		local->scan_chandef.width = ieee80211_s1g_channel_width(chan);
+		goto  set_channel;
+	}
+
 	switch (scan_req->scan_width) {
 	case NL80211_BSS_CHAN_WIDTH_5:
 		local->scan_chandef.width = NL80211_CHAN_WIDTH_5;
@@ -925,8 +936,14 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 		else
 			local->scan_chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 		break;
+	case NL80211_BSS_CHAN_WIDTH_1:
+	case NL80211_BSS_CHAN_WIDTH_2:
+		/* shouldn't get here, S1G handled above */
+		WARN_ON(1);
+		break;
 	}
 
+set_channel:
 	if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
 		skip = 1;
 
-- 
2.20.1

[PATCH 08/22] nl80211: support S1G capabilities

[Thomas Pedersen]

Declare the structures needed to define S1G capabilities.

NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/cfg80211.h       |  3 +++
 include/uapi/linux/nl80211.h |  9 +++++++++
 net/wireless/nl80211.c       | 16 ++++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f44839823d1e..b7e1a9dcf22c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2486,6 +2486,8 @@ enum cfg80211_assoc_req_flags {
  * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association
  *	Request/Response frame or %NULL if FILS is not used. This field starts
  *	with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
+ * @s1g_capa: S1G capability override
+ * @s1g_capa_mask: S1G capability override mask
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -2500,6 +2502,7 @@ struct cfg80211_assoc_request {
 	const u8 *fils_kek;
 	size_t fils_kek_len;
 	const u8 *fils_nonces;
+	struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 00ac24f2e293..03f4d83da473 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2515,6 +2515,12 @@ enum nl80211_commands {
  * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
  *	association request when used with NL80211_CMD_NEW_STATION).
  *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2997,6 +3003,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_HE_6GHZ_CAPABILITY,
 
+	NL80211_ATTR_S1G_CAPABILITY,
+	NL80211_ATTR_S1G_CAPABILITY_MASK,
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3046,6 +3054,7 @@ enum nl80211_attrs {
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
 #define NL80211_HT_CAPABILITY_LEN		26
 #define NL80211_VHT_CAPABILITY_LEN		12
+#define NL80211_S1G_CAPABILITY_LEN		15
 #define NL80211_HE_MIN_CAPABILITY_LEN           16
 #define NL80211_HE_MAX_CAPABILITY_LEN           54
 #define NL80211_MAX_NR_CIPHER_SUITES		5
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c5950d154d66..5672abb34b86 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -666,6 +666,9 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_SCAN_FREQ_KHZ] = { .type = NLA_NESTED },
 	[NL80211_ATTR_HE_6GHZ_CAPABILITY] =
 		NLA_POLICY_EXACT_LEN(sizeof(struct ieee80211_he_6ghz_capa)),
+	[NL80211_ATTR_S1G_CAPABILITY] = { .len = NL80211_S1G_CAPABILITY_LEN },
+	[NL80211_ATTR_S1G_CAPABILITY_MASK] = {
+					.len = NL80211_S1G_CAPABILITY_LEN },
 };
 
 /* policy for the key attributes */
@@ -9594,6 +9597,19 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 			nla_data(info->attrs[NL80211_ATTR_FILS_NONCES]);
 	}
 
+	if (info->attrs[NL80211_ATTR_S1G_CAPABILITY_MASK])
+		memcpy(&req.s1g_capa_mask,
+		       nla_data(info->attrs[NL80211_ATTR_S1G_CAPABILITY_MASK]),
+		       sizeof(req.s1g_capa_mask));
+
+	if (info->attrs[NL80211_ATTR_S1G_CAPABILITY]) {
+		if (!info->attrs[NL80211_ATTR_S1G_CAPABILITY_MASK])
+			return -EINVAL;
+		memcpy(&req.s1g_capa,
+		       nla_data(info->attrs[NL80211_ATTR_S1G_CAPABILITY]),
+		       sizeof(req.s1g_capa));
+	}
+
 	err = nl80211_crypto_settings(rdev, info, &req.crypto, 1);
 	if (!err) {
 		wdev_lock(dev->ieee80211_ptr);
-- 
2.20.1

[PATCH 09/22] mac80211: support S1G STA capabilities

[Thomas Pedersen]

Include the S1G Capabilities element in an association
request, and support the cfg80211 capability overrides.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  4 ++++
 net/mac80211/mlme.c        |  8 +++++++
 net/mac80211/util.c        | 45 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 0b1eaec6649f..5da2713af500 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -530,6 +530,8 @@ struct ieee80211_if_managed {
 	struct ieee80211_ht_cap ht_capa_mask; /* Valid parts of ht_capa */
 	struct ieee80211_vht_cap vht_capa; /* configured VHT overrides */
 	struct ieee80211_vht_cap vht_capa_mask; /* Valid parts of vht_capa */
+	struct ieee80211_s1g_cap s1g_capa; /* configured S1G overrides */
+	struct ieee80211_s1g_cap s1g_capa_mask; /* valid s1g_capa bits */
 
 	/* TDLS support */
 	u8 tdls_peer[ETH_ALEN] __aligned(2);
@@ -2193,6 +2195,8 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb, bool need_basic,
 				enum nl80211_band band);
 u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo);
+u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
+			       struct ieee80211_sta_s1g_cap *caps, u8 *buf);
 
 /* channel management */
 bool ieee80211_chandef_ht_oper(const struct ieee80211_ht_operation *ht_oper,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ac870309b911..b69889563457 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1018,6 +1018,10 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
 	}
 
+	if (sband->band == NL80211_BAND_S1GHZ)
+		pos = ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap,
+						 skb_put(skb, 17));
+
 	/* add any remaining custom (i.e. vendor specific here) IEs */
 	if (assoc_data->ie_len) {
 		noffset = assoc_data->ie_len;
@@ -5461,6 +5465,10 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 	memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
 	       sizeof(ifmgd->vht_capa_mask));
 
+	memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa));
+	memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask,
+	       sizeof(ifmgd->s1g_capa_mask));
+
 	if (req->ie && req->ie_len) {
 		memcpy(assoc_data->ie, req->ie, req->ie_len);
 		assoc_data->ie_len = req->ie_len;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 35798997e521..c7ab7ab057f9 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -4278,6 +4278,51 @@ int ieee80211_max_num_channels(struct ieee80211_local *local)
 	return max_num_different_channels;
 }
 
+u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
+			       struct ieee80211_sta_s1g_cap *own_cap, u8 *buf)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_s1g_cap s1g_capab;
+	u8 *pos = buf;
+	int i;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return pos;
+
+	if (!own_cap->s1g)
+		return pos;
+
+	memcpy(s1g_capab.capab_info, own_cap->cap, sizeof(own_cap->cap));
+	memcpy(s1g_capab.supp_mcs_nss, own_cap->nss_mcs,
+	       sizeof(own_cap->nss_mcs));
+
+	/* override the capability info */
+	for (i = 0; i < sizeof(ifmgd->s1g_capa.capab_info); i++) {
+		u8 mask = ifmgd->s1g_capa_mask.capab_info[i];
+
+		s1g_capab.capab_info[i] &= ~mask;
+		s1g_capab.capab_info[i] |= (ifmgd->s1g_capa.capab_info[i] &
+					    mask);
+	}
+
+	/* then MCS and NSS set */
+	for (i = 0; i < sizeof(ifmgd->s1g_capa.supp_mcs_nss); i++) {
+		u8 mask = ifmgd->s1g_capa_mask.supp_mcs_nss[i];
+
+		s1g_capab.supp_mcs_nss[i] &= ~mask;
+		s1g_capab.supp_mcs_nss[i] |= (ifmgd->s1g_capa.supp_mcs_nss[i] &
+					      mask);
+	}
+
+	*pos++ = WLAN_EID_S1G_CAPABILITIES;
+	*pos++ = sizeof(s1g_capab);
+
+	memcpy(pos, &s1g_capab, sizeof(s1g_capab));
+	pos += sizeof(s1g_capab);
+
+	return pos;
+}
+
 u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo)
 {
 	*buf++ = WLAN_EID_VENDOR_SPECIFIC;
-- 
2.20.1

[PATCH 10/22] cfg80211: convert S1G beacon to scan results

[Thomas Pedersen]

The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h | 32 ++++++++++++++++++++++
 net/wireless/scan.c       | 57 ++++++++++++++++++++++++++++++++-------
 2 files changed, 80 insertions(+), 9 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index c47f43e65a2f..fe70cd99dec7 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -151,6 +151,9 @@
 
 #define IEEE80211_ANO_NETTYPE_WILD              15
 
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT    0x100
+
 /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
 #define IEEE80211_CTL_EXT_POLL		0x2000
 #define IEEE80211_CTL_EXT_SPR		0x3000
@@ -553,6 +556,28 @@ static inline bool ieee80211_is_s1g_beacon(__le16 fc)
 	       cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON);
 }
 
+/**
+ * ieee80211_next_tbtt_present - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON && IEEE80211_S1G_BCN_NEXT_TBTT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_next_tbtt_present(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON) &&
+	       fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT);
+}
+
+/**
+ * ieee80211_is_s1g_short_beacon - check if next tbtt present bit is set. Only
+ * true for S1G beacons when they're short.
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_short_beacon(__le16 fc)
+{
+	return ieee80211_is_s1g_beacon(fc) && ieee80211_next_tbtt_present(fc);
+}
+
 /**
  * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
  * @fc: frame control bytes in little-endian byteorder
@@ -1034,6 +1059,13 @@ struct ieee80211_ext {
 			u8 change_seq;
 			u8 variable[0];
 		} __packed s1g_beacon;
+		struct {
+			u8 sa[ETH_ALEN];
+			__le32 timestamp;
+			u8 change_seq;
+			u8 next_tbtt[3];
+			u8 variable[0];
+		} __packed s1g_short_beacon;
 	} u;
 } __packed __aligned(2);
 
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e67a74488bbe..bf72a13dd2aa 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1807,8 +1807,11 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 	struct cfg80211_bss_ies *ies;
 	struct ieee80211_channel *channel;
 	bool signal_valid;
-	size_t ielen = len - offsetof(struct ieee80211_mgmt,
-				      u.probe_resp.variable);
+	struct ieee80211_ext *ext = NULL;
+	u8 *bssid, *variable;
+	u16 capability, beacon_int;
+	size_t ielen, min_hdr_len = offsetof(struct ieee80211_mgmt,
+					     u.probe_resp.variable);
 	int bss_type;
 
 	BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) !=
@@ -1826,21 +1829,57 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 		    (data->signal < 0 || data->signal > 100)))
 		return NULL;
 
-	if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable)))
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		ext = (void *) mgmt;
+		min_hdr_len = offsetof(struct ieee80211_ext, u.s1g_beacon);
+		if (ieee80211_is_s1g_short_beacon(mgmt->frame_control))
+			min_hdr_len = offsetof(struct ieee80211_ext,
+					       u.s1g_short_beacon.variable);
+	}
+
+	if (WARN_ON(len < min_hdr_len))
 		return NULL;
 
-	channel = cfg80211_get_bss_channel(wiphy, mgmt->u.beacon.variable,
+	ielen = len - min_hdr_len;
+	variable = mgmt->u.probe_resp.variable;
+	if (ext) {
+		if (ieee80211_is_s1g_short_beacon(mgmt->frame_control))
+			variable = ext->u.s1g_short_beacon.variable;
+		else
+			variable = ext->u.s1g_beacon.variable;
+	}
+
+	channel = cfg80211_get_bss_channel(wiphy, variable,
 					   ielen, data->chan, data->scan_width);
 	if (!channel)
 		return NULL;
 
+	if (ext) {
+		struct ieee80211_s1g_bcn_compat_ie *compat;
+		u8 *ie;
+
+		ie = (void *)cfg80211_find_ie(WLAN_EID_S1G_BCN_COMPAT,
+					      variable, ielen);
+		if (!ie)
+			return NULL;
+		compat = (void *)(ie + 2);
+		bssid = ext->u.s1g_beacon.sa;
+		capability = le16_to_cpu(compat->compat_info);
+		beacon_int = le16_to_cpu(compat->beacon_int);
+	} else {
+		bssid = mgmt->bssid;
+		beacon_int = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
+		capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
+	}
+
 	ies = kzalloc(sizeof(*ies) + ielen, gfp);
 	if (!ies)
 		return NULL;
 	ies->len = ielen;
 	ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
-	ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control);
-	memcpy(ies->data, mgmt->u.probe_resp.variable, ielen);
+	ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control) ||
+			   ieee80211_is_s1g_beacon(mgmt->frame_control);
+	memcpy(ies->data, variable, ielen);
 
 	if (ieee80211_is_probe_resp(mgmt->frame_control))
 		rcu_assign_pointer(tmp.pub.proberesp_ies, ies);
@@ -1848,12 +1887,12 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 		rcu_assign_pointer(tmp.pub.beacon_ies, ies);
 	rcu_assign_pointer(tmp.pub.ies, ies);
 
-	memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN);
+	memcpy(tmp.pub.bssid, bssid, ETH_ALEN);
+	tmp.pub.beacon_interval = beacon_int;
+	tmp.pub.capability = capability;
 	tmp.pub.channel = channel;
 	tmp.pub.scan_width = data->scan_width;
 	tmp.pub.signal = data->signal;
-	tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
-	tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
 	tmp.ts_boottime = data->boottime_ns;
 	tmp.parent_tsf = data->parent_tsf;
 	tmp.pub.chains = data->chains;
-- 
2.20.1

[PATCH 11/22] cfg80211: parse S1G Operation element for BSS channel

[Thomas Pedersen]

Extract the BSS primary channel from the S1G Operation
element.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/wireless/scan.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index bf72a13dd2aa..169b6904e011 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1318,15 +1318,26 @@ cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen,
 	tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen);
 	if (tmp && tmp[1] == 1) {
 		channel_number = tmp[2];
-	} else {
-		tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
-		if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
-			struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
+		goto found_channel;
+	}
 
-			channel_number = htop->primary_chan;
-		}
+	tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
+	if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
+		struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
+
+		channel_number = htop->primary_chan;
+		goto found_channel;
+	}
+
+	tmp = cfg80211_find_ie(WLAN_EID_S1G_OPERATION, ie, ielen);
+	if (tmp && tmp[1] >= sizeof(struct ieee80211_s1g_oper_ie)) {
+		struct ieee80211_s1g_oper_ie *s1gop = (void *)(tmp + 2);
+
+		channel_number = s1gop->primary_ch;
+		goto found_channel;
 	}
 
+found_channel:
 	if (channel_number < 0) {
 		/* No channel information in frame payload */
 		return channel;
-- 
2.20.1

[PATCH 12/22] mac80211: convert S1G beacon to scan results

[Thomas Pedersen]

This commit finds the correct offset for Information
Elements in S1G beacon frames so they can be reported in
scan results, and track whether a given BSS is S1G.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  7 +++++++
 net/mac80211/rx.c          |  3 ++-
 net/mac80211/scan.c        | 20 ++++++++++++++++----
 net/mac80211/util.c        | 28 ++++++++++++++++++++++++++++
 4 files changed, 53 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 5da2713af500..378945b0f3a0 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -127,6 +127,9 @@ struct ieee80211_bss {
 
 	/* Keep track of what bits of information we have valid info for. */
 	u8 valid_data;
+
+	/* BSS info was transmitted by an S1G STA */
+	u8 s1g;
 };
 
 /**
@@ -1524,6 +1527,10 @@ struct ieee802_11_elems {
 	u8 dtim_count;
 	u8 dtim_period;
 	const struct ieee80211_addba_ext_ie *addba_ext_ie;
+	const struct ieee80211_s1g_cap *s1g_capab;
+	const struct ieee80211_s1g_oper_ie *s1g_oper;
+	const u8 *s1g_tsbtt;
+	const struct ieee80211_s1g_bcn_compat_ie *s1g_bcn_compat;
 
 	/* length of them, respectively */
 	u8 ext_capab_len;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 836cde516a18..5b92f56682e2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4586,7 +4586,8 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 	ieee80211_verify_alignment(&rx);
 
 	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control) ||
-		     ieee80211_is_beacon(hdr->frame_control)))
+		     ieee80211_is_beacon(hdr->frame_control) ||
+		     ieee80211_is_s1g_beacon(hdr->frame_control)))
 		ieee80211_scan_rx(local, skb);
 
 	if (ieee80211_is_data(fc)) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5002791fe165..3dd65b7c839b 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -124,6 +124,9 @@ ieee80211_update_bss_from_elems(struct ieee80211_local *local,
 			bss->valid_data |= IEEE80211_BSS_VALID_WMM;
 	}
 
+	if (!elems->parse_error && elems->s1g_capab)
+		bss->s1g = true;
+
 	if (beacon) {
 		struct ieee80211_supported_band *sband =
 			local->hw.wiphy->bands[rx_status->band];
@@ -146,7 +149,8 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 			  struct ieee80211_mgmt *mgmt, size_t len,
 			  struct ieee80211_channel *channel)
 {
-	bool beacon = ieee80211_is_beacon(mgmt->frame_control);
+	bool beacon = ieee80211_is_beacon(mgmt->frame_control) ||
+		      ieee80211_is_s1g_beacon(mgmt->frame_control);
 	struct cfg80211_bss *cbss, *non_tx_cbss;
 	struct ieee80211_bss *bss, *non_tx_bss;
 	struct cfg80211_inform_bss bss_meta = {
@@ -195,6 +199,11 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 		elements = mgmt->u.probe_resp.variable;
 		baselen = offsetof(struct ieee80211_mgmt,
 				   u.probe_resp.variable);
+	} else if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		baselen = offsetof(struct ieee80211_ext, u.s1g_beacon.variable);
+		elements = ext->u.s1g_beacon.variable;
 	} else {
 		baselen = offsetof(struct ieee80211_mgmt, u.beacon.variable);
 		elements = mgmt->u.beacon.variable;
@@ -246,9 +255,12 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 	struct ieee80211_bss *bss;
 	struct ieee80211_channel *channel;
 
-	if (skb->len < 24 ||
-	    (!ieee80211_is_probe_resp(mgmt->frame_control) &&
-	     !ieee80211_is_beacon(mgmt->frame_control)))
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		if (skb->len < 15)
+			return;
+	} else if (skb->len < 24 ||
+		 (!ieee80211_is_probe_resp(mgmt->frame_control) &&
+		  !ieee80211_is_beacon(mgmt->frame_control)))
 		return;
 
 	sdata1 = rcu_dereference(local->scan_sdata);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index c7ab7ab057f9..0fa57349c4e5 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1003,6 +1003,10 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 		case WLAN_EID_LINK_ID:
 		case WLAN_EID_BSS_MAX_IDLE_PERIOD:
 		case WLAN_EID_RSNX:
+		case WLAN_EID_S1G_BCN_COMPAT:
+		case WLAN_EID_S1G_CAPABILITIES:
+		case WLAN_EID_S1G_OPERATION:
+		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
 		/*
 		 * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible
 		 * that if the content gets bigger it might be needed more than once
@@ -1288,6 +1292,30 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 								&crc : NULL,
 							  elem, elems);
 			break;
+		case WLAN_EID_S1G_CAPABILITIES:
+			if (elen == 15)
+				elems->s1g_capab = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_OPERATION:
+			if (elen == 6)
+				elems->s1g_oper = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
+			if (elen == 2)
+				elems->s1g_tsbtt = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_BCN_COMPAT:
+			if (elen == sizeof(struct ieee80211_s1g_bcn_compat_ie))
+				elems->s1g_bcn_compat = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
 		default:
 			break;
 		}
-- 
2.20.1

[PATCH 13/22] cfg80211: handle Association Response from S1G STA

[Thomas Pedersen]

The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h |  5 +++++
 net/wireless/mlme.c       | 20 ++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index fe70cd99dec7..9307b60cef97 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1100,6 +1100,11 @@ struct ieee80211_mgmt {
 			/* followed by Supported rates */
 			u8 variable[0];
 		} __packed assoc_resp, reassoc_resp;
+		struct {
+			__le16 capab_info;
+			__le16 status_code;
+			u8 variable[0];
+		} __packed s1g_assoc_resp, s1g_reassoc_resp;
 		struct {
 			__le16 capab_info;
 			__le16 listen_interval;
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index a6c61a2e6569..b5275fe93531 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -30,6 +30,8 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss,
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
 	struct cfg80211_connect_resp_params cr;
+	const struct cfg80211_bss_ies *ies;
+	const u8 *s1g;
 
 	memset(&cr, 0, sizeof(cr));
 	cr.status = (int)le16_to_cpu(mgmt->u.assoc_resp.status_code);
@@ -42,6 +44,24 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss,
 		len - offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
 	cr.timeout_reason = NL80211_TIMEOUT_UNSPECIFIED;
 
+	/* Detect whether this was an S1G Association Response and adjust IE
+	 * location accordingly.
+	 */
+	rcu_read_lock();
+	ies = rcu_dereference(bss->ies);
+	if (WARN_ON(!ies)) {
+		rcu_read_unlock();
+		return;
+	}
+	s1g = cfg80211_find_ie(WLAN_EID_S1G_CAPABILITIES, ies->data, ies->len);
+	if (s1g) {
+		cr.resp_ie = (u8 *)&mgmt->u.s1g_assoc_resp.variable;
+		cr.resp_ie_len =
+			len - offsetof(struct ieee80211_mgmt,
+				       u.s1g_assoc_resp.variable);
+	}
+	rcu_read_unlock();
+
 	trace_cfg80211_send_rx_assoc(dev, bss);
 
 	/*
-- 
2.20.1

[PATCH 14/22] mac80211: encode listen interval for S1G

[Thomas Pedersen]

S1G allows listen interval up to 2^14 * 10000 beacon
intervals. In order to do this listen interval needs a
scaling factor applied to the lower 14 bits. Calculate
this and properly encode the listen interval for S1G STAs.

See IEEE802.11ah-2016 Table 9-44a for reference.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h  |  8 ++++++++
 net/mac80211/ieee80211_i.h |  1 +
 net/mac80211/mlme.c        | 11 +++++++----
 net/mac80211/util.c        | 20 ++++++++++++++++++++
 4 files changed, 36 insertions(+), 4 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 9307b60cef97..93c1496af8f2 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2446,6 +2446,14 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 
 #define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
 
+#define LISTEN_INT_USF_MASK (BIT(14) | BIT(15))
+#define LISTEN_INT_USF_SHIFT 14
+
+#define IEEE80211_MAX_USF 3
+#define IEEE80211_MAX_UI ((1 << 14) - 1)
+
+static const int listen_int_usf[] = { 1, 10, 1000, 10000 };
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 378945b0f3a0..8b779ad363c5 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -2293,6 +2293,7 @@ void ieee80211_tdls_chsw_work(struct work_struct *wk);
 void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
 				      const u8 *peer, u16 reason);
 const char *ieee80211_get_reason_code_string(u16 reason_code);
+__le16 ieee80211_encode_usf(int val);
 
 extern const struct ethtool_ops ieee80211_ethtool_ops;
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b69889563457..6a62a221b89e 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -686,6 +686,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	struct ieee80211_bss *bss = (void *)assoc_data->bss->priv;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos, qos_info, *ie_start;
@@ -696,6 +697,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	struct ieee80211_channel *chan;
 	u32 rates = 0;
+	__le16 listen_int;
 	struct element *ext_capa = NULL;
 
 	/* we know it's writable, cast away the const */
@@ -784,13 +786,15 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 	memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
 
+	listen_int = cpu_to_le16(bss->s1g ?
+			ieee80211_encode_usf(local->hw.conf.listen_interval) :
+			local->hw.conf.listen_interval);
 	if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
 		skb_put(skb, 10);
 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						  IEEE80211_STYPE_REASSOC_REQ);
 		mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.reassoc_req.listen_interval =
-				cpu_to_le16(local->hw.conf.listen_interval);
+		mgmt->u.reassoc_req.listen_interval = listen_int;
 		memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
 		       ETH_ALEN);
 	} else {
@@ -798,8 +802,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						  IEEE80211_STYPE_ASSOC_REQ);
 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.assoc_req.listen_interval =
-				cpu_to_le16(local->hw.conf.listen_interval);
+		mgmt->u.assoc_req.listen_interval = listen_int;
 	}
 
 	/* SSID */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 0fa57349c4e5..caf4098deeda 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -4393,3 +4393,23 @@ const u8 ieee80211_ac_to_qos_mask[IEEE80211_NUM_ACS] = {
 	IEEE80211_WMM_IE_STA_QOSINFO_AC_BE,
 	IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
 };
+
+__le16 ieee80211_encode_usf(int listen_interval)
+{
+	u16 ui, usf = 0;
+
+	/* find greatest USF */
+	while (usf < IEEE80211_MAX_USF) {
+		if (listen_interval % listen_int_usf[usf + 1])
+			break;
+		usf += 1;
+	}
+	ui = listen_interval / listen_int_usf[usf];
+
+	/* error if there is a remainder. Should've been checked by user */
+	if (WARN_ON_ONCE(ui > IEEE80211_MAX_UI))
+		ui &= (1 << LISTEN_INT_USF_SHIFT) - 1;
+	listen_interval = usf << LISTEN_INT_USF_SHIFT | ui;
+
+	return listen_interval;
+}
-- 
2.20.1

[PATCH 15/22] mac80211: don't calculate duration for S1G

[Thomas Pedersen]

For now just skip the duration calculation for frames
transmitted on the S1G band and avoid a warning.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/tx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index dca01d7e6e3e..424fd9b2aeda 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -82,6 +82,10 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
 
 	erp = txrate->flags & IEEE80211_RATE_ERP_G;
 
+	/* TODO */
+	if (sband->band == NL80211_BAND_S1GHZ)
+		return 0;
+
 	/*
 	 * data and mgmt (except PS Poll):
 	 * - during CFP: 32768
-- 
2.20.1

[PATCH 16/22] mac80211: handle S1G low rates

[Thomas Pedersen]

S1G doesn't have legacy (sband->bitrates) rates, only MCS.
For now, just send a frame at MCS 0 if a low rate is
requested. Note we also redefine (since we're out of TX
flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G
MCS. This is probably OK as VHT MCS is not valid on S1G
band and vice versa.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/mac80211.h |  2 ++
 net/mac80211/rate.c    | 33 ++++++++++++++++++++++++++-------
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 66e2bfd165e8..a9340e673610 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -812,6 +812,8 @@ enum mac80211_tx_info_flags {
 
 #define IEEE80211_TX_CTL_STBC_SHIFT		23
 
+#define IEEE80211_TX_RC_S1G_MCS IEEE80211_TX_RC_VHT_MCS
+
 /**
  * enum mac80211_tx_control_flags - flags to describe transmit control
  *
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index b051f125d3af..63266d73c252 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -266,10 +266,15 @@ void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata)
 	if (WARN_ON(!sdata->vif.bss_conf.chandef.chan))
 		return;
 
+	band = sdata->vif.bss_conf.chandef.chan->band;
+	if (band == NL80211_BAND_S1GHZ) {
+		/* TODO */
+		return;
+	}
+
 	if (WARN_ON_ONCE(!basic_rates))
 		return;
 
-	band = sdata->vif.bss_conf.chandef.chan->band;
 	user_mask = sdata->rc_rateidx_mask[band];
 	sband = local->hw.wiphy->bands[band];
 
@@ -296,21 +301,29 @@ static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc)
 		!ieee80211_is_data(fc);
 }
 
-static void rc_send_low_basicrate(s8 *idx, u32 basic_rates,
+static void rc_send_low_basicrate(struct ieee80211_tx_rate *rate,
+				  u32 basic_rates,
 				  struct ieee80211_supported_band *sband)
 {
 	u8 i;
 
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		/* TODO */
+		rate->flags |= IEEE80211_TX_RC_S1G_MCS;
+		rate->idx = 0;
+		return;
+	}
+
 	if (basic_rates == 0)
 		return; /* assume basic rates unknown and accept rate */
-	if (*idx < 0)
+	if (rate->idx < 0)
 		return;
-	if (basic_rates & (1 << *idx))
+	if (basic_rates & (1 << rate->idx))
 		return; /* selected rate is a basic rate */
 
-	for (i = *idx + 1; i <= sband->n_bitrates; i++) {
+	for (i = rate->idx + 1; i <= sband->n_bitrates; i++) {
 		if (basic_rates & (1 << i)) {
-			*idx = i;
+			rate->idx = i;
 			return;
 		}
 	}
@@ -328,6 +341,12 @@ static void __rate_control_send_low(struct ieee80211_hw *hw,
 	u32 rate_flags =
 		ieee80211_chandef_rate_flags(&hw->conf.chandef);
 
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		info->control.rates[0].flags |= IEEE80211_TX_RC_S1G_MCS;
+		info->control.rates[0].idx = 0;
+		return;
+	}
+
 	if ((sband->band == NL80211_BAND_2GHZ) &&
 	    (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE))
 		rate_flags |= IEEE80211_RATE_ERP_G;
@@ -388,7 +407,7 @@ static bool rate_control_send_low(struct ieee80211_sta *pubsta,
 		}
 
 		if (use_basicrate)
-			rc_send_low_basicrate(&info->control.rates[0].idx,
+			rc_send_low_basicrate(&info->control.rates[0],
 					      txrc->bss_conf->basic_rates,
 					      sband);
 
-- 
2.20.1

[PATCH 17/22] mac80211: avoid rate init for S1G band

[Thomas Pedersen]

minstrel_ht is confused by the lack of sband->bitrates,
and S1G will likely require a unique RC algorithm, so
avoid rate init for now if STA is on the S1G band.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/rate.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 63266d73c252..0cba7fed28cf 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -51,6 +51,12 @@ void rate_control_rate_init(struct sta_info *sta)
 
 	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
 
+	/* TODO: check for minstrel_s1g ? */
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		rcu_read_unlock();
+		return;
+	}
+
 	spin_lock_bh(&sta->rate_ctrl_lock);
 	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
 			    priv_sta);
-- 
2.20.1

[PATCH 18/22] mac80211: receive and process S1G beacons

[Thomas Pedersen]

S1G beacons are 802.11 Extension Frames, so the fixed
header part differs from regular beacons.

Add a handler to process S1G beacons and abstract out the
fetching of BSSID and element start locations in the
beacon body handler.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  4 ++
 net/mac80211/iface.c       |  5 +++
 net/mac80211/mlme.c        | 87 +++++++++++++++++++++++++++++---------
 net/mac80211/rx.c          | 84 ++++++++++++++++--------------------
 net/mac80211/util.c        | 52 +++++++++++++++++++++++
 5 files changed, 164 insertions(+), 68 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 8b779ad363c5..5d0157065db6 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1649,6 +1649,8 @@ int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 				  struct sk_buff *skb);
+void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb);
 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata);
 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata);
@@ -2294,6 +2296,8 @@ void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
 				      const u8 *peer, u16 reason);
 const char *ieee80211_get_reason_code_string(u16 reason_code);
 __le16 ieee80211_encode_usf(int val);
+u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
+			enum nl80211_iftype type);
 
 extern const struct ethtool_ops ieee80211_ethtool_ops;
 
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 9740ae8fa697..1369f6e575d7 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1379,6 +1379,11 @@ static void ieee80211_iface_work(struct work_struct *work)
 				WARN_ON(1);
 				break;
 			}
+		} else if (ieee80211_is_ext(mgmt->frame_control)) {
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
+				ieee80211_sta_rx_queued_ext(sdata, skb);
+			else
+				WARN_ON(1);
 		} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
 			struct ieee80211_hdr *hdr = (void *)mgmt;
 			/*
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6a62a221b89e..9a26ef99cef9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1604,6 +1604,9 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
 	int new_ap_level;
 	__le16 capab = mgmt->u.probe_resp.capab_info;
 
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control))
+		return 0;	/* TODO */
+
 	if (country_ie &&
 	    (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
 	     capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
@@ -2450,7 +2453,8 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
 	 * data idle periods for sending the periodic probe request to the
 	 * AP we're connected to.
 	 */
-	if (is_multicast_ether_addr(hdr->addr1))
+	if (is_multicast_ether_addr(hdr->addr1) ||
+	    ieee80211_is_s1g_beacon(hdr->frame_control))
 		return;
 
 	ieee80211_sta_reset_conn_monitor(sdata);
@@ -3919,12 +3923,13 @@ static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
 	return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
 }
 
-static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
-				     struct ieee80211_mgmt *mgmt, size_t len,
-				     struct ieee80211_rx_status *rx_status)
+static void ieee80211_rx_beacon(struct ieee80211_sub_if_data *sdata,
+				struct ieee80211_hdr *hdr, size_t len,
+				struct ieee80211_rx_status *rx_status)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+	struct ieee80211_mgmt *mgmt = (void *) hdr;
 	size_t baselen;
 	struct ieee802_11_elems elems;
 	struct ieee80211_local *local = sdata->local;
@@ -3934,14 +3939,24 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	u32 changed = 0;
 	bool erp_valid;
 	u8 erp_value = 0;
-	u32 ncrc;
-	u8 *bssid;
+	u32 ncrc = 0;
+	u8 *bssid, *variable = mgmt->u.beacon.variable;
 	u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
 
 	sdata_assert_lock(sdata);
 
 	/* Process beacon from the current BSS */
-	baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
+	bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type);
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		if (ieee80211_is_s1g_short_beacon(ext->frame_control))
+			variable = ext->u.s1g_short_beacon.variable;
+		else
+			variable = ext->u.s1g_beacon.variable;
+	}
+
+	baselen = (u8 *) variable - (u8 *) mgmt;
 	if (baselen > len)
 		return;
 
@@ -3961,10 +3976,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	rcu_read_unlock();
 
 	if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
-	    ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->assoc_data->bss)) {
-		ieee802_11_parse_elems(mgmt->u.beacon.variable,
+	    ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->bss)) {
+		ieee802_11_parse_elems(variable,
 				       len - baselen, false, &elems,
-				       mgmt->bssid,
+				       bssid,
 				       ifmgd->assoc_data->bss->bssid);
 
 		ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
@@ -3997,7 +4012,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (!ifmgd->associated ||
-	    !ieee80211_rx_our_beacon(mgmt->bssid,  ifmgd->associated))
+	    !ieee80211_rx_our_beacon(bssid,  ifmgd->associated))
 		return;
 	bssid = ifmgd->associated->bssid;
 
@@ -4017,8 +4032,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	 */
 	ieee80211_sta_reset_beacon_monitor(sdata);
 
-	ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
-	ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
+	/* TODO: CRC urrently not calculated on S1G Beacon Compatibility
+	 * element (which carries the beacon interval). Don't forget to add a
+	 * bit to care_about_ies[] above if mac80211 is interested in a
+	 * changing S1G element.
+	 */
+	if (!ieee80211_is_s1g_beacon(hdr->frame_control))
+		ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
+	ncrc = ieee802_11_parse_elems_crc(variable,
 					  len - baselen, false, &elems,
 					  care_about_ies, ncrc,
 					  mgmt->bssid, bssid);
@@ -4052,7 +4073,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		struct ieee80211_p2p_noa_attr noa = {};
 		int ret;
 
-		ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
+		ret = cfg80211_get_p2p_attr(variable,
 					    len - baselen,
 					    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
 					    (u8 *) &noa, sizeof(noa));
@@ -4088,7 +4109,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	 * the driver will use them. The synchronized view is currently
 	 * guaranteed only in certain callbacks.
 	 */
-	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
+	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
+	    !ieee80211_is_s1g_beacon(hdr->frame_control)) {
 		sdata->vif.bss_conf.sync_tsf =
 			le64_to_cpu(mgmt->u.beacon.timestamp);
 		sdata->vif.bss_conf.sync_device_ts =
@@ -4096,7 +4118,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count;
 	}
 
-	if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
+	if ((ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) ||
+	    ieee80211_is_s1g_short_beacon(mgmt->frame_control))
 		return;
 	ifmgd->beacon_crc = ncrc;
 	ifmgd->beacon_crc_valid = true;
@@ -4137,9 +4160,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	} else {
 		erp_valid = false;
 	}
-	changed |= ieee80211_handle_bss_capability(sdata,
-			le16_to_cpu(mgmt->u.beacon.capab_info),
-			erp_valid, erp_value);
+
+	if (!ieee80211_is_s1g_beacon(hdr->frame_control)) {
+		changed |= ieee80211_handle_bss_capability(sdata,
+				le16_to_cpu(mgmt->u.beacon.capab_info),
+				erp_valid, erp_value);
+	}
 
 	mutex_lock(&local->sta_mtx);
 	sta = sta_info_get(sdata, bssid);
@@ -4177,6 +4203,26 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	ieee80211_bss_info_change_notify(sdata, changed);
 }
 
+void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb)
+{
+	struct ieee80211_rx_status *rx_status;
+	struct ieee80211_hdr *hdr;
+	u16 fc;
+
+	rx_status = (struct ieee80211_rx_status *) skb->cb;
+	hdr = (struct ieee80211_hdr *) skb->data;
+	fc = le16_to_cpu(hdr->frame_control);
+
+	sdata_lock(sdata);
+	switch (fc & IEEE80211_FCTL_STYPE) {
+	case IEEE80211_STYPE_S1G_BEACON:
+		ieee80211_rx_beacon(sdata, hdr, skb->len, rx_status);
+		break;
+	}
+	sdata_unlock(sdata);
+}
+
 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 				  struct sk_buff *skb)
 {
@@ -4194,7 +4240,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 
 	switch (fc & IEEE80211_FCTL_STYPE) {
 	case IEEE80211_STYPE_BEACON:
-		ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
+		ieee80211_rx_beacon(sdata, (struct ieee80211_hdr *) mgmt,
+				    skb->len, rx_status);
 		break;
 	case IEEE80211_STYPE_PROBE_RESP:
 		ieee80211_rx_mgmt_probe_resp(sdata, skb);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5b92f56682e2..e1291898bde8 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -42,51 +42,6 @@ static inline void ieee80211_rx_stats(struct net_device *dev, u32 len)
 	u64_stats_update_end(&tstats->syncp);
 }
 
-static u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
-			       enum nl80211_iftype type)
-{
-	__le16 fc = hdr->frame_control;
-
-	if (ieee80211_is_data(fc)) {
-		if (len < 24) /* drop incorrect hdr len (data) */
-			return NULL;
-
-		if (ieee80211_has_a4(fc))
-			return NULL;
-		if (ieee80211_has_tods(fc))
-			return hdr->addr1;
-		if (ieee80211_has_fromds(fc))
-			return hdr->addr2;
-
-		return hdr->addr3;
-	}
-
-	if (ieee80211_is_mgmt(fc)) {
-		if (len < 24) /* drop incorrect hdr len (mgmt) */
-			return NULL;
-		return hdr->addr3;
-	}
-
-	if (ieee80211_is_ctl(fc)) {
-		if (ieee80211_is_pspoll(fc))
-			return hdr->addr1;
-
-		if (ieee80211_is_back_req(fc)) {
-			switch (type) {
-			case NL80211_IFTYPE_STATION:
-				return hdr->addr2;
-			case NL80211_IFTYPE_AP:
-			case NL80211_IFTYPE_AP_VLAN:
-				return hdr->addr1;
-			default:
-				break; /* fall through to the return */
-			}
-		}
-	}
-
-	return NULL;
-}
-
 /*
  * monitor mode reception
  *
@@ -1801,7 +1756,8 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 		}
 	} else if (rx->sdata->vif.type == NL80211_IFTYPE_OCB) {
 		sta->rx_stats.last_rx = jiffies;
-	} else if (!is_multicast_ether_addr(hdr->addr1)) {
+	} else if (!ieee80211_is_s1g_beacon(hdr->frame_control) &&
+		   is_multicast_ether_addr(hdr->addr1)) {
 		/*
 		 * Mesh beacons will update last_rx when if they are found to
 		 * match the current local configuration when processed.
@@ -1839,6 +1795,9 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 		}
 	}
 
+	if (ieee80211_is_s1g_beacon(hdr->frame_control))
+		return RX_CONTINUE;
+
 	/*
 	 * Change STA power saving mode only at the end of a frame
 	 * exchange sequence, and only for a data or management
@@ -1949,6 +1908,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	__le16 fc;
 	const struct ieee80211_cipher_scheme *cs = NULL;
 
+	if (ieee80211_is_ext(hdr->frame_control))
+		return RX_CONTINUE;
+
 	/*
 	 * Key selection 101
 	 *
@@ -2257,7 +2219,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
 	hdr = (struct ieee80211_hdr *)rx->skb->data;
 	fc = hdr->frame_control;
 
-	if (ieee80211_is_ctl(fc))
+	if (ieee80211_is_ctl(fc) || ieee80211_is_ext(fc))
 		return RX_CONTINUE;
 
 	sc = le16_to_cpu(hdr->seq_ctrl);
@@ -3131,6 +3093,9 @@ ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx)
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
 
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control))
+		return RX_CONTINUE;
+
 	/*
 	 * From here on, look only at management frames.
 	 * Data and control frames are already handled,
@@ -3597,6 +3562,27 @@ ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx)
 	return RX_QUEUED;
 }
 
+static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_ext(struct ieee80211_rx_data *rx)
+{
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct ieee80211_hdr *hdr = (void *)rx->skb->data;
+
+	if (!ieee80211_is_ext(hdr->frame_control))
+		return RX_CONTINUE;
+
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return RX_DROP_MONITOR;
+
+	/* for now only beacons are ext, so queue them */
+	skb_queue_tail(&sdata->skb_queue, rx->skb);
+	ieee80211_queue_work(&rx->local->hw, &sdata->work);
+	if (rx->sta)
+		rx->sta->rx_stats.packets++;
+
+	return RX_QUEUED;
+}
+
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
 {
@@ -3816,6 +3802,7 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
 		CALL_RXH(ieee80211_rx_h_userspace_mgmt);
 		CALL_RXH(ieee80211_rx_h_action_post_userspace);
 		CALL_RXH(ieee80211_rx_h_action_return);
+		CALL_RXH(ieee80211_rx_h_ext);
 		CALL_RXH(ieee80211_rx_h_mgmt);
 
  rxh_next:
@@ -3982,7 +3969,8 @@ static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx)
 	struct ieee80211_hdr *hdr = (void *)skb->data;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	u8 *bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type);
-	bool multicast = is_multicast_ether_addr(hdr->addr1);
+	bool multicast = is_multicast_ether_addr(hdr->addr1) ||
+			 ieee80211_is_s1g_beacon(hdr->frame_control);
 
 	switch (sdata->vif.type) {
 	case NL80211_IFTYPE_STATION:
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index caf4098deeda..0d304c328f7e 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -45,6 +45,58 @@ struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy)
 }
 EXPORT_SYMBOL(wiphy_to_ieee80211_hw);
 
+u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
+			enum nl80211_iftype type)
+{
+	__le16 fc = hdr->frame_control;
+
+	if (ieee80211_is_data(fc)) {
+		if (len < 24) /* drop incorrect hdr len (data) */
+			return NULL;
+
+		if (ieee80211_has_a4(fc))
+			return NULL;
+		if (ieee80211_has_tods(fc))
+			return hdr->addr1;
+		if (ieee80211_has_fromds(fc))
+			return hdr->addr2;
+
+		return hdr->addr3;
+	}
+
+	if (ieee80211_is_s1g_beacon(fc)) {
+		struct ieee80211_ext *ext = (void *) hdr;
+
+		return ext->u.s1g_beacon.sa;
+	}
+
+	if (ieee80211_is_mgmt(fc)) {
+		if (len < 24) /* drop incorrect hdr len (mgmt) */
+			return NULL;
+		return hdr->addr3;
+	}
+
+	if (ieee80211_is_ctl(fc)) {
+		if (ieee80211_is_pspoll(fc))
+			return hdr->addr1;
+
+		if (ieee80211_is_back_req(fc)) {
+			switch (type) {
+			case NL80211_IFTYPE_STATION:
+				return hdr->addr2;
+			case NL80211_IFTYPE_AP:
+			case NL80211_IFTYPE_AP_VLAN:
+				return hdr->addr1;
+			default:
+				break; /* fall through to the return */
+			}
+		}
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(ieee80211_get_bssid);
+
 void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx)
 {
 	struct sk_buff *skb;
-- 
2.20.1

[PATCH 19/22] mac80211: support S1G association

[Thomas Pedersen]

The changes required for associating in S1G are:

- apply S1G BSS channel info before assoc
- mark all S1G STAs as QoS STAs
- include and parse AID request element
- handle new Association Response format
- don't fail assoc if supported rates element is missing

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h  | 25 ++++++++++++
 include/net/mac80211.h     |  1 +
 net/mac80211/cfg.c         |  2 +
 net/mac80211/ibss.c        |  3 +-
 net/mac80211/ieee80211_i.h |  4 ++
 net/mac80211/mlme.c        | 80 ++++++++++++++++++++++++++++++++------
 net/mac80211/util.c        | 56 ++++++++++++++++++++++++++
 7 files changed, 158 insertions(+), 13 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 93c1496af8f2..5cff6a373158 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -987,6 +987,25 @@ enum ieee80211_vht_opmode_bits {
 	IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF	= 0x80,
 };
 
+/**
+ * enum ieee80211_s1g_chanwidth
+ * These are defined in IEEE802.11-2016ah Table 10-20
+ * as BSS Channel Width
+ *
+ * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel
+ */
+enum ieee80211_s1g_chanwidth {
+	IEEE80211_S1G_CHANWIDTH_1MHZ = 0,
+	IEEE80211_S1G_CHANWIDTH_2MHZ = 1,
+	IEEE80211_S1G_CHANWIDTH_4MHZ = 3,
+	IEEE80211_S1G_CHANWIDTH_8MHZ = 7,
+	IEEE80211_S1G_CHANWIDTH_16MHZ = 15,
+};
+
 #define WLAN_SA_QUERY_TR_ID_LEN 2
 #define WLAN_MEMBERSHIP_LEN 8
 #define WLAN_USER_POSITION_LEN 16
@@ -2446,6 +2465,10 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 
 #define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
 
+#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0)
+#define S1G_OPER_CH_WIDTH_OPER (BIT(1) | BIT(2) | BIT(3) | BIT(4))
+#define S1G_OPER_CH_WIDTH_OPER_SHIFT 1
+
 #define LISTEN_INT_USF_MASK (BIT(14) | BIT(15))
 #define LISTEN_INT_USF_SHIFT 14
 
@@ -2853,6 +2876,8 @@ enum ieee80211_eid {
 
 	WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201,
 
+	WLAN_EID_AID_REQUEST = 210,
+	WLAN_EID_AID_RESPONSE = 211,
 	WLAN_EID_S1G_BCN_COMPAT = 213,
 	WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214,
 	WLAN_EID_S1G_CAPABILITIES = 217,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index a9340e673610..c5760a912ec5 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -674,6 +674,7 @@ struct ieee80211_bss_conf {
 	} he_oper;
 	struct ieee80211_he_obss_pd he_obss_pd;
 	struct cfg80211_he_bss_color he_bss_color;
+	bool s1g;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 87fddd84c621..bbd9577788fb 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1071,6 +1071,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 	       sizeof(struct ieee80211_he_obss_pd));
 	memcpy(&sdata->vif.bss_conf.he_bss_color, &params->he_bss_color,
 	       sizeof(struct ieee80211_he_bss_color));
+	sdata->vif.bss_conf.s1g = params->chandef.chan->band ==
+				  NL80211_BAND_S1GHZ;
 
 	sdata->vif.bss_conf.ssid_len = params->ssid_len;
 	if (params->ssid_len)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 53632c2f5217..a8a87ce2d9da 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1037,7 +1037,8 @@ static void ieee80211_update_sta_info(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (sta && !sta->sta.wme &&
-	    elems->wmm_info && local->hw.queues >= IEEE80211_NUM_ACS) {
+	    (elems->wmm_info || elems->s1g_capab) &&
+	    local->hw.queues >= IEEE80211_NUM_ACS) {
 		sta->sta.wme = true;
 		ieee80211_check_fast_xmit(sta);
 	}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 5d0157065db6..c218e2294869 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1531,6 +1531,7 @@ struct ieee802_11_elems {
 	const struct ieee80211_s1g_oper_ie *s1g_oper;
 	const u8 *s1g_tsbtt;
 	const struct ieee80211_s1g_bcn_compat_ie *s1g_bcn_compat;
+	const struct ieee80211_aid_response_ie *aid_resp;
 
 	/* length of them, respectively */
 	u8 ext_capab_len;
@@ -2206,6 +2207,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo);
 u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
 			       struct ieee80211_sta_s1g_cap *caps, u8 *buf);
+u8 *ieee80211_add_aid_request_ie(struct ieee80211_sub_if_data *sdata, u8 *buf);
 
 /* channel management */
 bool ieee80211_chandef_ht_oper(const struct ieee80211_ht_operation *ht_oper,
@@ -2217,6 +2219,8 @@ bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, u32 vht_cap_info,
 bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
 				    const struct ieee80211_he_operation *he_oper,
 				    struct cfg80211_chan_def *chandef);
+bool ieee80211_chandef_s1g_oper(const struct ieee80211_s1g_oper_ie *oper,
+				struct cfg80211_chan_def *chandef);
 u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c);
 
 int __must_check
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9a26ef99cef9..2476d4a9596c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -149,6 +149,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 			     const struct ieee80211_ht_operation *ht_oper,
 			     const struct ieee80211_vht_operation *vht_oper,
 			     const struct ieee80211_he_operation *he_oper,
+			     const struct ieee80211_s1g_oper_ie *s1g_oper,
 			     struct cfg80211_chan_def *chandef, bool tracking)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -176,6 +177,15 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
 	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
 
+	if (s1g_oper && sband->band == NL80211_BAND_S1GHZ) {
+		ieee80211_chandef_s1g_oper(s1g_oper, chandef);
+		ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ |
+		      IEEE80211_STA_DISABLE_VHT |
+		      IEEE80211_STA_DISABLE_80P80MHZ |
+		      IEEE80211_STA_DISABLE_160MHZ;
+		goto out;
+	}
+
 	if (!ht_oper || !sta_ht_cap.ht_supported) {
 		ret = IEEE80211_STA_DISABLE_HT |
 		      IEEE80211_STA_DISABLE_VHT |
@@ -347,6 +357,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 			       const struct ieee80211_ht_operation *ht_oper,
 			       const struct ieee80211_vht_operation *vht_oper,
 			       const struct ieee80211_he_operation *he_oper,
+			       const struct ieee80211_s1g_oper_ie *s1g_oper,
 			       const u8 *bssid, u32 *changed)
 {
 	struct ieee80211_local *local = sdata->local;
@@ -393,7 +404,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 	/* calculate new channel (type) based on HT/VHT/HE operation IEs */
 	flags = ieee80211_determine_chantype(sdata, sband, chan, vht_cap_info,
 					     ht_oper, vht_oper, he_oper,
-					     &chandef, true);
+					     s1g_oper, &chandef, true);
 
 	/*
 	 * Downgrade the new channel if we associated with restricted
@@ -812,6 +823,9 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	*pos++ = assoc_data->ssid_len;
 	memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
 
+	if (bss->s1g)
+		goto skip_rates;
+
 	/* add all rates which were marked to be used above */
 	supp_rates_len = rates_len;
 	if (supp_rates_len > 8)
@@ -847,6 +861,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		}
 	}
 
+skip_rates:
 	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
 	    capab & WLAN_CAPABILITY_RADIO_MEASURE) {
 		pos = skb_put(skb, 4);
@@ -1021,9 +1036,11 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
 	}
 
-	if (sband->band == NL80211_BAND_S1GHZ)
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		pos = ieee80211_add_aid_request_ie(sdata, skb_put(skb, 3));
 		pos = ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap,
 						 skb_put(skb, 17));
+	}
 
 	/* add any remaining custom (i.e. vendor specific here) IEs */
 	if (assoc_data->ie_len) {
@@ -3270,6 +3287,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 				    struct ieee802_11_elems *elems)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_bss *bss = (void *)cbss->priv;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
 	struct sta_info *sta;
@@ -3279,13 +3297,24 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
 	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
 	u32 changed = 0;
+	u8 *pos;
 	int err;
 	bool ret;
 
 	/* AssocResp and ReassocResp have identical structure */
 
+	pos = mgmt->u.assoc_resp.variable;
 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
+	if (bss->s1g) {
+		pos = (u8 *) mgmt->u.s1g_assoc_resp.variable;
+		aid = 0; /* TODO */
+	}
 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
+	ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, elems,
+			       mgmt->bssid, assoc_data->bss->bssid);
+
+	if (elems->aid_resp)
+		aid = le16_to_cpu(elems->aid_resp->aid);
 
 	/*
 	 * The 5 MSB of the AID field are reserved
@@ -3302,7 +3331,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		ifmgd->broken_ap = true;
 	}
 
-	if (!elems->supp_rates) {
+	if (!bss->s1g && !elems->supp_rates) {
 		sdata_info(sdata, "no SuppRates element in AssocResp\n");
 		return false;
 	}
@@ -3544,7 +3573,8 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		sta->sta.mfp = false;
 	}
 
-	sta->sta.wme = elems->wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
+	sta->sta.wme = (elems->wmm_param || elems->s1g_capab) &&
+		       local->hw.queues >= IEEE80211_NUM_ACS;
 
 	err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
 	if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
@@ -3636,7 +3666,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	int ac, uapsd_queues = -1;
 	u8 *pos;
 	bool reassoc;
-	struct cfg80211_bss *bss;
+	struct cfg80211_bss *cbss;
+	struct ieee80211_bss *bss;
 	struct ieee80211_event event = {
 		.type = MLME_EVENT,
 		.u.mlme.data = ASSOC_EVENT,
@@ -3646,9 +3677,13 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 
 	if (!assoc_data)
 		return;
+
 	if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
 		return;
 
+	cbss = assoc_data->bss;
+	bss = (void *) cbss->priv;
+
 	/*
 	 * AssocResp and ReassocResp have identical structure, so process both
 	 * of them in this function.
@@ -3660,7 +3695,12 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
 	status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
+	pos = mgmt->u.assoc_resp.variable;
 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
+	if (bss->s1g) {
+		pos = (u8 *) mgmt->u.s1g_assoc_resp.variable;
+		aid = 0; /* TODO */
+	}
 
 	sdata_info(sdata,
 		   "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
@@ -3671,7 +3711,6 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	    fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
 		return;
 
-	pos = mgmt->u.assoc_resp.variable;
 	ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems,
 			       mgmt->bssid, assoc_data->bss->bssid);
 
@@ -3691,8 +3730,6 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 
-	bss = assoc_data->bss;
-
 	if (status_code != WLAN_STATUS_SUCCESS) {
 		sdata_info(sdata, "%pM denied association (code=%d)\n",
 			   mgmt->sa, status_code);
@@ -3701,10 +3738,10 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		event.u.mlme.reason = status_code;
 		drv_event_callback(sdata->local, sdata, &event);
 	} else {
-		if (!ieee80211_assoc_success(sdata, bss, mgmt, len, &elems)) {
+		if (!ieee80211_assoc_success(sdata, cbss, mgmt, len, &elems)) {
 			/* oops -- internal error -- send timeout for now */
 			ieee80211_destroy_assoc_data(sdata, false, false);
-			cfg80211_assoc_timeout(sdata->dev, bss);
+			cfg80211_assoc_timeout(sdata->dev, cbss);
 			return;
 		}
 		event.u.mlme.status = MLME_SUCCESS;
@@ -3725,7 +3762,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 				uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
 	}
 
-	cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues,
+	cfg80211_rx_assoc_resp(sdata->dev, cbss, (u8 *)mgmt, len, uapsd_queues,
 			       ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len);
 }
 
@@ -4175,7 +4212,7 @@ static void ieee80211_rx_beacon(struct ieee80211_sub_if_data *sdata,
 	if (ieee80211_config_bw(sdata, sta, elems.ht_cap_elem,
 				elems.vht_cap_elem, elems.ht_operation,
 				elems.vht_operation, elems.he_operation,
-				bssid, &changed)) {
+				elems.s1g_oper, bssid, &changed)) {
 		mutex_unlock(&local->sta_mtx);
 		sdata_info(sdata,
 			   "failed to follow AP %pM bandwidth change, disconnect\n",
@@ -4912,6 +4949,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	const struct ieee80211_ht_operation *ht_oper = NULL;
 	const struct ieee80211_vht_operation *vht_oper = NULL;
 	const struct ieee80211_he_operation *he_oper = NULL;
+	const struct ieee80211_s1g_oper_ie *s1g_oper = NULL;
 	struct ieee80211_supported_band *sband;
 	struct cfg80211_chan_def chandef;
 	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
@@ -5014,10 +5052,23 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	if (!have_80mhz)
 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
 
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		const u8 *s1g_oper_ie;
+
+		s1g_oper_ie = ieee80211_bss_get_ie(cbss,
+						   WLAN_EID_S1G_OPERATION);
+		if (s1g_oper_ie && s1g_oper_ie[1] >= sizeof(*s1g_oper))
+			s1g_oper = (void *)(s1g_oper_ie + 2);
+		else
+			sdata_info(sdata,
+				   "AP missing S1G operation element?\n");
+	}
+
 	ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
 						     cbss->channel,
 						     bss->vht_cap_info,
 						     ht_oper, vht_oper, he_oper,
+						     s1g_oper,
 						     &chandef, false);
 
 	sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
@@ -5144,6 +5195,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		const struct cfg80211_bss_ies *ies;
 		int shift = ieee80211_vif_get_shift(&sdata->vif);
 
+		/* TODO: S1G Basic Rate Set is expressed elsewhere */
+		if (cbss->channel->band == NL80211_BAND_S1GHZ)
+			goto skip_rates;
+
 		ieee80211_get_rates(sband, bss->supp_rates,
 				    bss->supp_rates_len,
 				    &rates, &basic_rates,
@@ -5188,6 +5243,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		else
 			sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
 
+skip_rates:
 		memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
 
 		/* set timing information */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 0d304c328f7e..2153b65297c4 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1058,6 +1058,7 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 		case WLAN_EID_S1G_BCN_COMPAT:
 		case WLAN_EID_S1G_CAPABILITIES:
 		case WLAN_EID_S1G_OPERATION:
+		case WLAN_EID_AID_RESPONSE:
 		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
 		/*
 		 * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible
@@ -1368,6 +1369,12 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 			else
 				elem_parse_failed = true;
 			break;
+		case WLAN_EID_AID_RESPONSE:
+			if (elen == sizeof(struct ieee80211_aid_response_ie))
+				elems->aid_resp = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
 		default:
 			break;
 		}
@@ -3452,6 +3459,43 @@ bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
 
 	*chandef = he_chandef;
 
+	return false;
+}
+
+bool ieee80211_chandef_s1g_oper(const struct ieee80211_s1g_oper_ie *oper,
+				struct cfg80211_chan_def *chandef)
+{
+	u32 oper_freq;
+
+	if (!oper)
+		return false;
+
+	switch ((oper->ch_width & S1G_OPER_CH_WIDTH_OPER) >>
+		S1G_OPER_CH_WIDTH_OPER_SHIFT) {
+	case IEEE80211_S1G_CHANWIDTH_1MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_1;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_2MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_2;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_4MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_4;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_8MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_8;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_16MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_16;
+		break;
+	default:
+		return false;
+	}
+
+	oper_freq = ieee80211_channel_to_freq_khz(oper->oper_ch,
+						  NL80211_BAND_S1GHZ);
+	chandef->center_freq1 = KHZ_TO_MHZ(oper_freq);
+	chandef->freq1_offset = oper_freq % 1000;
+
 	return true;
 }
 
@@ -4358,6 +4402,18 @@ int ieee80211_max_num_channels(struct ieee80211_local *local)
 	return max_num_different_channels;
 }
 
+u8 *ieee80211_add_aid_request_ie(struct ieee80211_sub_if_data *sdata, u8 *buf)
+{
+	u8 *pos = buf;
+
+	*pos++ = WLAN_EID_AID_REQUEST;
+	*pos++ = 1;
+
+	*pos++ = 0;
+
+	return pos;
+}
+
 u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
 			       struct ieee80211_sta_s1g_cap *own_cap, u8 *buf)
 {
-- 
2.20.1

[PATCH 20/22] nl80211: include frequency offset in survey info

[Thomas Pedersen]

Recently channels gained a potential frequency offset, so
include this in the per-channel survey info.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/uapi/linux/nl80211.h | 2 ++
 net/wireless/nl80211.c       | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 03f4d83da473..973b56c2226f 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4073,6 +4073,7 @@ enum nl80211_user_reg_hint_type {
  *	receiving frames destined to the local BSS
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
+ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
  */
 enum nl80211_survey_info {
@@ -4088,6 +4089,7 @@ enum nl80211_survey_info {
 	NL80211_SURVEY_INFO_TIME_SCAN,
 	NL80211_SURVEY_INFO_PAD,
 	NL80211_SURVEY_INFO_TIME_BSS_RX,
+	NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
 
 	/* keep last */
 	__NL80211_SURVEY_INFO_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5672abb34b86..750bef58b319 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -9119,6 +9119,11 @@ static int nl80211_send_survey(struct sk_buff *msg, u32 portid, u32 seq,
 			survey->channel->center_freq))
 		goto nla_put_failure;
 
+	if (survey->channel &&
+	    nla_put_u32(msg, NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
+			survey->channel->freq_offset))
+		goto nla_put_failure;
+
 	if ((survey->filled & SURVEY_INFO_NOISE_DBM) &&
 	    nla_put_u8(msg, NL80211_SURVEY_INFO_NOISE, survey->noise))
 		goto nla_put_failure;
-- 
2.20.1

[PATCH 21/22] mac80211_hwsim: indicate support for S1G

[Thomas Pedersen]

Advertise S1G Capabilities and channels to mac80211.

Requires a few fixups to account for missing
sband->bitrates, and a custom regulatory db to actually
enable the S1G channels.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 80 ++++++++++++++++++++++++---
 include/linux/ieee80211.h             | 12 +++-
 2 files changed, 84 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 9dd9d73f4484..ee2f3a008e01 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -377,6 +377,50 @@ static const struct ieee80211_channel hwsim_channels_5ghz[] = {
 	CHAN5G(5925), /* Channel 185 */
 };
 
+#define NUM_S1G_CHANS_US 51
+static struct ieee80211_channel hwsim_channels_s1g[NUM_S1G_CHANS_US];
+
+static const struct ieee80211_sta_s1g_cap hwsim_s1g_cap = {
+	.s1g = true,
+	.cap = { S1G_CAPAB_B0_SGI_1MHZ | S1G_CAPAB_B0_SGI_2MHZ |
+		 SM(S1G_CAPAB_B0_SUPP_CH_WIDTH, S1G_SUPP_CH_WIDTH_2),
+		 0,
+		 0,
+		 S1G_CAPAB_B3_MAX_MPDU_LEN,
+		 0,
+		 S1G_CAPAB_B5_AMPDU,
+		 0,
+		 S1G_CAPAB_B7_DUP_1MHZ,
+		 S1G_CAPAB_B8_TWT_RESPOND | S1G_CAPAB_B8_TWT_REQUEST,
+		 0},
+	.nss_mcs = { 0xfc | 1, /* MCS 7 for 1 SS */
+	/* RX Highest Supported Long GI Data Rate 0:7 */
+		     0,
+	/* RX Highest Supported Long GI Data Rate 0:7 */
+	/* TX S1G MCS Map 0:6 */
+		     0xfa,
+	/* TX S1G MCS Map :7 */
+	/* TX Highest Supported Long GI Data Rate 0:6 */
+		     0x80,
+	/* TX Highest Supported Long GI Data Rate 7:8 */
+	/* Rx Single spatial stream and S1G-MCS Map for 1MHz */
+	/* Tx Single spatial stream and S1G-MCS Map for 1MHz */
+		     0 },
+};
+
+static void hwsim_init_s1g_channels(struct ieee80211_channel *channels)
+{
+	int ch, freq;
+
+	for (ch = 0; ch < NUM_S1G_CHANS_US; ch++) {
+		freq = 902000 + (ch + 1) * 500;
+		channels[ch].band = NL80211_BAND_S1GHZ;
+		channels[ch].center_freq = KHZ_TO_MHZ(freq);
+		channels[ch].freq_offset = freq % 1000;
+		channels[ch].hw_value = ch + 1;
+	}
+}
+
 static const struct ieee80211_rate hwsim_rates[] = {
 	{ .bitrate = 10 },
 	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
@@ -505,6 +549,7 @@ struct mac80211_hwsim_data {
 	struct ieee80211_supported_band bands[NUM_NL80211_BANDS];
 	struct ieee80211_channel channels_2ghz[ARRAY_SIZE(hwsim_channels_2ghz)];
 	struct ieee80211_channel channels_5ghz[ARRAY_SIZE(hwsim_channels_5ghz)];
+	struct ieee80211_channel channels_s1g[ARRAY_SIZE(hwsim_channels_s1g)];
 	struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)];
 	struct ieee80211_iface_combination if_combination;
 	struct ieee80211_iface_limit if_limits[3];
@@ -900,12 +945,14 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw,
 	struct mac80211_hwsim_data *data = hw->priv;
 	struct sk_buff *skb;
 	struct hwsim_radiotap_hdr *hdr;
-	u16 flags;
+	u16 flags, bitrate;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx_skb);
 	struct ieee80211_rate *txrate = ieee80211_get_tx_rate(hw, info);
 
-	if (WARN_ON(!txrate))
-		return;
+	if (!txrate)
+		bitrate = 0;
+	else
+		bitrate = txrate->bitrate;
 
 	if (!netif_running(hwsim_mon))
 		return;
@@ -924,10 +971,10 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw,
 					  (1 << IEEE80211_RADIOTAP_CHANNEL));
 	hdr->rt_tsft = __mac80211_hwsim_get_tsf(data);
 	hdr->rt_flags = 0;
-	hdr->rt_rate = txrate->bitrate / 5;
+	hdr->rt_rate = bitrate / 5;
 	hdr->rt_channel = cpu_to_le16(chan->center_freq);
 	flags = IEEE80211_CHAN_2GHZ;
-	if (txrate->flags & IEEE80211_RATE_ERP_G)
+	if (txrate && txrate->flags & IEEE80211_RATE_ERP_G)
 		flags |= IEEE80211_CHAN_OFDM;
 	else
 		flags |= IEEE80211_CHAN_CCK;
@@ -1341,6 +1388,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 	memset(&rx_status, 0, sizeof(rx_status));
 	rx_status.flag |= RX_FLAG_MACTIME_START;
 	rx_status.freq = chan->center_freq;
+	rx_status.freq_offset = chan->freq_offset ? 1 : 0;
 	rx_status.band = chan->band;
 	if (info->control.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) {
 		rx_status.rate_idx =
@@ -1522,14 +1570,18 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 		/* fake header transmission time */
 		struct ieee80211_mgmt *mgmt;
 		struct ieee80211_rate *txrate;
+		/* TODO: get MCS */
+		int bitrate = 100;
 		u64 ts;
 
 		mgmt = (struct ieee80211_mgmt *)skb->data;
 		txrate = ieee80211_get_tx_rate(hw, txi);
+		if (txrate)
+			bitrate = txrate->bitrate;
 		ts = mac80211_hwsim_get_tsf_raw();
 		mgmt->u.probe_resp.timestamp =
 			cpu_to_le64(ts + data->tsf_offset +
-				    24 * 8 * 10 / txrate->bitrate);
+				    24 * 8 * 10 / bitrate);
 	}
 
 	mac80211_hwsim_monitor_rx(hw, skb, channel);
@@ -1664,6 +1716,8 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 	struct ieee80211_rate *txrate;
 	struct ieee80211_mgmt *mgmt;
 	struct sk_buff *skb;
+	/* TODO: get MCS */
+	int bitrate = 100;
 
 	hwsim_check_magic(vif);
 
@@ -1683,13 +1737,15 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 				       ARRAY_SIZE(info->control.rates));
 
 	txrate = ieee80211_get_tx_rate(hw, info);
+	if (txrate)
+		bitrate = txrate->bitrate;
 
 	mgmt = (struct ieee80211_mgmt *) skb->data;
 	/* fake header transmission time */
 	data->abs_bcn_ts = mac80211_hwsim_get_tsf_raw();
 	mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts +
 					       data->tsf_offset +
-					       24 * 8 * 10 / txrate->bitrate);
+					       24 * 8 * 10 / bitrate);
 
 	mac80211_hwsim_tx_frame(hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
@@ -3079,6 +3135,8 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 		sizeof(hwsim_channels_2ghz));
 	memcpy(data->channels_5ghz, hwsim_channels_5ghz,
 		sizeof(hwsim_channels_5ghz));
+	memcpy(data->channels_s1g, hwsim_channels_s1g,
+	       sizeof(hwsim_channels_s1g));
 	memcpy(data->rates, hwsim_rates, sizeof(hwsim_rates));
 
 	for (band = NL80211_BAND_2GHZ; band < NUM_NL80211_BANDS; band++) {
@@ -3121,6 +3179,12 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 			sband->vht_cap.vht_mcs.tx_mcs_map =
 				sband->vht_cap.vht_mcs.rx_mcs_map;
 			break;
+		case NL80211_BAND_S1GHZ:
+			memcpy(&sband->s1g_cap, &hwsim_s1g_cap,
+			       sizeof(sband->s1g_cap));
+			sband->channels = data->channels_s1g;
+			sband->n_channels = ARRAY_SIZE(hwsim_channels_s1g);
+			break;
 		default:
 			continue;
 		}
@@ -4318,6 +4382,8 @@ static int __init init_mac80211_hwsim(void)
 		goto out_exit_virtio;
 	}
 
+	hwsim_init_s1g_channels(hwsim_channels_s1g);
+
 	for (i = 0; i < radios; i++) {
 		struct hwsim_new_radio_params param = { 0 };
 
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 5cff6a373158..e2198453ecb6 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2385,6 +2385,9 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 	return spr_len;
 }
 
+#define SM(f, v)	(((v) << f##_SHIFT) & f)
+#define MS(f, v)	(((v) & f) >> f##_SHIFT)
+
 /* S1G Capabilities Information field */
 #define S1G_CAPAB_B0_S1G_LONG BIT(0)
 #define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
@@ -2392,9 +2395,16 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 #define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
 #define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
 #define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
-#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B0_SUPP_CH_WIDTH	(BIT(6) | BIT(7))
 #define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
 
+#define S1G_SUPP_CH_WIDTH_2	0
+#define S1G_SUPP_CH_WIDTH_4	1
+#define S1G_SUPP_CH_WIDTH_8	2
+#define S1G_SUPP_CH_WIDTH_16	3
+#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << MS(S1G_CAPAB_B0_SUPP_CH_WIDTH, \
+					     cap[0])) << 1)
+
 #define S1G_CAPAB_B1_RX_LDPC BIT(0)
 #define S1G_CAPAB_B1_TX_STBC BIT(1)
 #define S1G_CAPAB_B1_RX_STBC BIT(2)
-- 
2.20.1

[PATCH 22/22] mac80211_hwsim: fix TSF timestamp write to S1G beacon

[Thomas Pedersen]

mac80211_hwsim was corrupting the S1G beacon because the
timestamp location (and size) does not match the
management beacon.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index ee2f3a008e01..f53b144c431b 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1743,9 +1743,18 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 	mgmt = (struct ieee80211_mgmt *) skb->data;
 	/* fake header transmission time */
 	data->abs_bcn_ts = mac80211_hwsim_get_tsf_raw();
-	mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts +
-					       data->tsf_offset +
-					       24 * 8 * 10 / bitrate);
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		ext->u.s1g_beacon.timestamp = cpu_to_le32(data->abs_bcn_ts +
+							  data->tsf_offset +
+							  10 * 8 * 10 /
+							  bitrate);
+	} else {
+		mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts +
+						       data->tsf_offset +
+						       24 * 8 * 10 / bitrate);
+	}
 
 	mac80211_hwsim_tx_frame(hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
-- 
2.20.1

Re: [PATCH 02/22] cfg80211: regulatory: pass min. bandwidth to regulatory rule extractor

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 5945 bytes --]

Hi Thomas,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on next-20200827]
[also build test ERROR on v5.9-rc2]
[cannot apply to mac80211-next/master mac80211/master wireless-drivers-next/master wireless-drivers/master v5.9-rc2 v5.9-rc1 v5.8]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-initial-S1G-support/20200828-063630
base:    88abac0b753dfdd85362a26d2da8277cb1e0842b
config: riscv-allyesconfig (attached as .config)
compiler: riscv64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/net/wireless/realtek/rtw88/regd.c: In function 'rtw_regd_apply_beaconing_flags':
>> drivers/net/wireless/realtek/rtw88/regd.c:279:15: error: too few arguments to function 'freq_reg_info'
     279 |    reg_rule = freq_reg_info(wiphy,
         |               ^~~~~~~~~~~~~
   In file included from include/net/mac80211.h:21,
                    from drivers/net/wireless/realtek/rtw88/main.h:8,
                    from drivers/net/wireless/realtek/rtw88/regd.c:5:
   include/net/cfg80211.h:5880:34: note: declared here
    5880 | const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
         |                                  ^~~~~~~~~~~~~
   In file included from include/linux/energy_model.h:10,
                    from include/linux/device.h:16,
                    from include/linux/dma-mapping.h:7,
                    from include/linux/skbuff.h:31,
                    from include/linux/if_ether.h:19,
                    from include/net/mac80211.h:18,
                    from drivers/net/wireless/realtek/rtw88/main.h:8,
                    from drivers/net/wireless/realtek/rtw88/regd.c:5:
   At top level:
   include/linux/sched/topology.h:40:3: warning: 'sd_flag_debug' defined but not used [-Wunused-const-variable=]
      40 | } sd_flag_debug[] = {
         |   ^~~~~~~~~~~~~
   In file included from include/linux/energy_model.h:10,
                    from include/linux/device.h:16,
                    from include/linux/dma-mapping.h:7,
                    from include/linux/skbuff.h:31,
                    from include/linux/if_ether.h:19,
                    from include/net/mac80211.h:18,
                    from drivers/net/wireless/realtek/rtw88/main.h:8,
                    from drivers/net/wireless/realtek/rtw88/regd.c:5:
   include/linux/sched/topology.h:30:27: warning: 'SD_DEGENERATE_GROUPS_MASK' defined but not used [-Wunused-const-variable=]
      30 | static const unsigned int SD_DEGENERATE_GROUPS_MASK =
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~

# https://github.com/0day-ci/linux/commit/cc241e6d10cc9d9bef4ab40d2989677df2623bd9
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Thomas-Pedersen/add-initial-S1G-support/20200828-063630
git checkout cc241e6d10cc9d9bef4ab40d2989677df2623bd9
vim +/freq_reg_info +279 drivers/net/wireless/realtek/rtw88/regd.c

e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  261  
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  262  static void rtw_regd_apply_beaconing_flags(struct wiphy *wiphy,
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  263  					   enum nl80211_reg_initiator initiator)
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  264  {
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  265  	enum nl80211_band band;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  266  	struct ieee80211_supported_band *sband;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  267  	const struct ieee80211_reg_rule *reg_rule;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  268  	struct ieee80211_channel *ch;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  269  	unsigned int i;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  270  
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  271  	for (band = 0; band < NUM_NL80211_BANDS; band++) {
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  272  		if (!wiphy->bands[band])
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  273  			continue;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  274  
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  275  		sband = wiphy->bands[band];
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  276  		for (i = 0; i < sband->n_channels; i++) {
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  277  			ch = &sband->channels[i];
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  278  
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26 @279  			reg_rule = freq_reg_info(wiphy,
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  280  						 MHZ_TO_KHZ(ch->center_freq));
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  281  			if (IS_ERR(reg_rule))
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  282  				continue;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  283  
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  284  			ch->flags &= ~IEEE80211_CHAN_DISABLED;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  285  
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  286  			if (!(reg_rule->flags & NL80211_RRF_NO_IR))
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  287  				ch->flags &= ~IEEE80211_CHAN_NO_IR;
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  288  		}
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  289  	}
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  290  }
e3037485c68ec1a Yan-Hsuan Chuang 2019-04-26  291  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 66784 bytes --]

Re: [PATCH 02/22] cfg80211: regulatory: pass min. bandwidth to regulatory rule extractor

[Thomas Pedersen]

On 2020-08-27 15:32, Thomas Pedersen wrote:

> diff --git a/net/wireless/reg.c b/net/wireless/reg.c
> index 35b8847a2f6d..6c130cec22c3 100644
> --- a/net/wireless/reg.c
> +++ b/net/wireless/reg.c
> @@ -1629,9 +1629,10 @@ __freq_reg_info(struct wiphy *wiphy, u32
> center_freq, u32 min_bw)
>  }
> 
>  const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
> -					       u32 center_freq)
> +					       u32 center_freq,
> +					       u32 min_bw)
>  {
> -	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20));
> +	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(min_bw));
>  }
>  EXPORT_SYMBOL(freq_reg_info);

Actually, it would be cleaner to keep the freq_reg_info() interface 
intact,
then set min_bw = 1 if center_freq is in the S1G band. The call to
freq_reg_info() for successively smaller bandwidths in the next patch 
could
just call __freq_reg_info() directly. Will fix in v2.

-- 
thomas

Re: [PATCH 21/22] mac80211_hwsim: indicate support for S1G

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 8192 bytes --]

Hi Thomas,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on next-20200827]
[cannot apply to mac80211-next/master mac80211/master wireless-drivers-next/master wireless-drivers/master v5.9-rc2 v5.9-rc1 v5.8 v5.9-rc2]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-initial-S1G-support/20200828-063630
base:    88abac0b753dfdd85362a26d2da8277cb1e0842b
config: riscv-allyesconfig (attached as .config)
compiler: riscv64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=riscv 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   In file included from drivers/net/wireless/ath/ath10k/sdio.c:17:
>> drivers/net/wireless/ath/ath10k/core.h:31: warning: "MS" redefined
      31 | #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
         | 
   In file included from include/net/mac80211.h:20,
                    from drivers/net/wireless/ath/ath10k/htt.h:16,
                    from drivers/net/wireless/ath/ath10k/core.h:18,
                    from drivers/net/wireless/ath/ath10k/sdio.c:17:
   include/linux/ieee80211.h:2389: note: this is the location of the previous definition
    2389 | #define MS(f, v) (((v) & f) >> f##_SHIFT)
         | 
   In file included from drivers/net/wireless/ath/ath10k/sdio.c:17:
>> drivers/net/wireless/ath/ath10k/core.h:32: warning: "SM" redefined
      32 | #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
         | 
   In file included from include/net/mac80211.h:20,
                    from drivers/net/wireless/ath/ath10k/htt.h:16,
                    from drivers/net/wireless/ath/ath10k/core.h:18,
                    from drivers/net/wireless/ath/ath10k/sdio.c:17:
   include/linux/ieee80211.h:2388: note: this is the location of the previous definition
    2388 | #define SM(f, v) (((v) << f##_SHIFT) & f)
         | 
   include/linux/ieee80211.h:2488:18: warning: 'listen_int_usf' defined but not used [-Wunused-const-variable=]
    2488 | static const int listen_int_usf[] = { 1, 10, 1000, 10000 };
         |                  ^~~~~~~~~~~~~~
   In file included from include/linux/energy_model.h:10,
                    from include/linux/device.h:16,
                    from include/linux/mmc/card.h:10,
                    from drivers/net/wireless/ath/ath10k/sdio.c:9:
   include/linux/sched/topology.h:40:3: warning: 'sd_flag_debug' defined but not used [-Wunused-const-variable=]
      40 | } sd_flag_debug[] = {
         |   ^~~~~~~~~~~~~
   In file included from include/linux/energy_model.h:10,
                    from include/linux/device.h:16,
                    from include/linux/mmc/card.h:10,
                    from drivers/net/wireless/ath/ath10k/sdio.c:9:
   include/linux/sched/topology.h:30:27: warning: 'SD_DEGENERATE_GROUPS_MASK' defined but not used [-Wunused-const-variable=]
      30 | static const unsigned int SD_DEGENERATE_GROUPS_MASK =
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~
--
   In file included from drivers/net/wireless/ath/ath10k/trace.h:10,
                    from drivers/net/wireless/ath/ath10k/trace.c:9:
>> drivers/net/wireless/ath/ath10k/core.h:31: warning: "MS" redefined
      31 | #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
         | 
   In file included from include/net/mac80211.h:20,
                    from drivers/net/wireless/ath/ath10k/htt.h:16,
                    from drivers/net/wireless/ath/ath10k/core.h:18,
                    from drivers/net/wireless/ath/ath10k/trace.h:10,
                    from drivers/net/wireless/ath/ath10k/trace.c:9:
   include/linux/ieee80211.h:2389: note: this is the location of the previous definition
    2389 | #define MS(f, v) (((v) & f) >> f##_SHIFT)
         | 
   In file included from drivers/net/wireless/ath/ath10k/trace.h:10,
                    from drivers/net/wireless/ath/ath10k/trace.c:9:
>> drivers/net/wireless/ath/ath10k/core.h:32: warning: "SM" redefined
      32 | #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
         | 
   In file included from include/net/mac80211.h:20,
                    from drivers/net/wireless/ath/ath10k/htt.h:16,
                    from drivers/net/wireless/ath/ath10k/core.h:18,
                    from drivers/net/wireless/ath/ath10k/trace.h:10,
                    from drivers/net/wireless/ath/ath10k/trace.c:9:
   include/linux/ieee80211.h:2388: note: this is the location of the previous definition
    2388 | #define SM(f, v) (((v) << f##_SHIFT) & f)
         | 
--
   In file included from drivers/net/wireless/ath/ath11k/mhi.c:7:
>> drivers/net/wireless/ath/ath11k/core.h:27: warning: "SM" redefined
      27 | #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
         | 
   In file included from include/net/mac80211.h:20,
                    from drivers/net/wireless/ath/ath11k/wmi.h:9,
                    from drivers/net/wireless/ath/ath11k/core.h:15,
                    from drivers/net/wireless/ath/ath11k/mhi.c:7:
   include/linux/ieee80211.h:2388: note: this is the location of the previous definition
    2388 | #define SM(f, v) (((v) << f##_SHIFT) & f)
         | 
   include/linux/ieee80211.h:2488:18: warning: 'listen_int_usf' defined but not used [-Wunused-const-variable=]
    2488 | static const int listen_int_usf[] = { 1, 10, 1000, 10000 };
         |                  ^~~~~~~~~~~~~~
   In file included from include/linux/energy_model.h:10,
                    from include/linux/device.h:16,
                    from include/linux/pci.h:37,
                    from drivers/net/wireless/ath/ath11k/mhi.c:5:
   include/linux/sched/topology.h:40:3: warning: 'sd_flag_debug' defined but not used [-Wunused-const-variable=]
      40 | } sd_flag_debug[] = {
         |   ^~~~~~~~~~~~~
   In file included from include/linux/energy_model.h:10,
                    from include/linux/device.h:16,
                    from include/linux/pci.h:37,
                    from drivers/net/wireless/ath/ath11k/mhi.c:5:
   include/linux/sched/topology.h:30:27: warning: 'SD_DEGENERATE_GROUPS_MASK' defined but not used [-Wunused-const-variable=]
      30 | static const unsigned int SD_DEGENERATE_GROUPS_MASK =
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~
--
   In file included from drivers/net/wireless/ath/ath11k/core.c:10:
>> drivers/net/wireless/ath/ath11k/core.h:27: warning: "SM" redefined
      27 | #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
         | 
   In file included from include/net/mac80211.h:20,
                    from drivers/net/wireless/ath/ath11k/wmi.h:9,
                    from drivers/net/wireless/ath/ath11k/core.h:15,
                    from drivers/net/wireless/ath/ath11k/core.c:10:
   include/linux/ieee80211.h:2388: note: this is the location of the previous definition
    2388 | #define SM(f, v) (((v) << f##_SHIFT) & f)
         | 

# https://github.com/0day-ci/linux/commit/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Thomas-Pedersen/add-initial-S1G-support/20200828-063630
git checkout dc5ef7078b77772b5e2ff5a57cd87144c4c9a583
vim +/MS +31 drivers/net/wireless/ath/ath10k/core.h

5e3dd157d7e70f0 Kalle Valo 2013-06-12  30  
5e3dd157d7e70f0 Kalle Valo 2013-06-12 @31  #define MS(_v, _f) (((_v) & _f##_MASK) >> _f##_LSB)
5e3dd157d7e70f0 Kalle Valo 2013-06-12 @32  #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
5e3dd157d7e70f0 Kalle Valo 2013-06-12  33  #define WO(_f)      ((_f##_OFFSET) >> 2)
5e3dd157d7e70f0 Kalle Valo 2013-06-12  34  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 66784 bytes --]

Re: [PATCH 21/22] mac80211_hwsim: indicate support for S1G

[Kalle Valo]

Thomas Pedersen <thomas@adapt-ip.com> writes:

> Advertise S1G Capabilities and channels to mac80211.
>
> Requires a few fixups to account for missing
> sband->bitrates, and a custom regulatory db to actually
> enable the S1G channels.
>
> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
> ---
>  drivers/net/wireless/mac80211_hwsim.c | 80 ++++++++++++++++++++++++---
>  include/linux/ieee80211.h             | 12 +++-

IMHO a mac80211_hwsim patch should not touch ieee80211.h.

> --- a/include/linux/ieee80211.h
> +++ b/include/linux/ieee80211.h
> @@ -2385,6 +2385,9 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
>  	return spr_len;
>  }
>  
> +#define SM(f, v)	(((v) << f##_SHIFT) & f)
> +#define MS(f, v)	(((v) & f) >> f##_SHIFT)
> +
>  /* S1G Capabilities Information field */
>  #define S1G_CAPAB_B0_S1G_LONG BIT(0)
>  #define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
> @@ -2392,9 +2395,16 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
>  #define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
>  #define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
>  #define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
> -#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
> +#define S1G_CAPAB_B0_SUPP_CH_WIDTH	(BIT(6) | BIT(7))
>  #define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
>  
> +#define S1G_SUPP_CH_WIDTH_2	0
> +#define S1G_SUPP_CH_WIDTH_4	1
> +#define S1G_SUPP_CH_WIDTH_8	2
> +#define S1G_SUPP_CH_WIDTH_16	3
> +#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << MS(S1G_CAPAB_B0_SUPP_CH_WIDTH, \
> +					     cap[0])) << 1)

We have GENMASK(), FIELD_GET() & co nowadays so no need for custom
macros.

-- 
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

[mac80211_hwsim] dc5ef7078b: BUG:KASAN:stack-out-of-bounds_in__freq_reg_info

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 7295 bytes --]

Greeting,

FYI, we noticed the following commit (built with gcc-9):

commit: dc5ef7078b77772b5e2ff5a57cd87144c4c9a583 ("mac80211_hwsim: indicate support for S1G")
url: https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-initial-S1G-support/20200828-063630


in testcase: boot

on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 8G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+-------------------------------------------------+------------+------------+
|                                                 | d86026ca9a | dc5ef7078b |
+-------------------------------------------------+------------+------------+
| boot_successes                                  | 8          | 0          |
| boot_failures                                   | 0          | 8          |
| BUG:KASAN:stack-out-of-bounds_in__freq_reg_info | 0          | 8          |
+-------------------------------------------------+------------+------------+


If you fix the issue, kindly add following tag
Reported-by: kernel test robot <lkp@intel.com>


[   16.018498] BUG: KASAN: stack-out-of-bounds in __freq_reg_info+0x14b/0x170
[   16.019402] Read of size 4 at addr ffffc9000001f8e4 by task swapper/0/1
[   16.020281] 
[   16.020387] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc2-next-20200827-00021-gdc5ef7078b7777 #1
[   16.020387] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[   16.020387] Call Trace:
[   16.020387]  dump_stack+0xbf/0x110
[   16.020387]  print_address_description.cold+0x5/0x4b3
[   16.020387]  ? log_store.cold+0x11/0x11
[   16.020387]  ? trace_hardirqs_off+0x29/0x110
[   16.020387]  ? _raw_spin_lock_irqsave+0x8c/0xd0
[   16.020387]  ? _raw_read_lock_irq+0x50/0x50
[   16.020387]  ? trace_hardirqs_on+0x2e/0x120
[   16.020387]  ? __freq_reg_info+0x14b/0x170
[   16.020387]  kasan_report.cold+0x1f/0x38
[   16.020387]  ? __freq_reg_info+0x14b/0x170
[   16.020387]  __freq_reg_info+0x14b/0x170
[   16.020387]  ? freq_reg_info_regd+0x110/0x110
[   16.020387]  ? mutex_is_locked+0x1b/0x30
[   16.020387]  wiphy_update_regulatory+0x338/0x6b0
[   16.020387]  wiphy_regulatory_register+0x3b/0xa0
[   16.020387]  wiphy_register+0xcf3/0x1020
[   16.020387]  ? wiphy_unregister+0x570/0x570
[   16.020387]  ? register_netdev+0x40/0x40
[   16.020387]  ? minstrel_ht_alloc+0x1a7/0x230
[   16.020387]  ieee80211_register_hw+0xf05/0x1460
[   16.020387]  ? ieee80211_ifa6_changed+0x230/0x230
[   16.020387]  ? memset+0x20/0x40
[   16.020387]  ? __hrtimer_init+0xbb/0xf0
[   16.020387]  mac80211_hwsim_new_radio+0xd89/0x1830
[   16.020387]  ? hwsim_virtio_rx_work+0x1f0/0x1f0
[   16.020387]  init_mac80211_hwsim+0x315/0x42c
[   16.020387]  ? printk+0x96/0xb2
[   16.020387]  ? rndis_wlan_driver_init+0x1a/0x1a
[   16.020387]  do_one_initcall+0x75/0x294
[   16.020387]  ? perf_trace_initcall_level+0x1f0/0x1f0
[   16.020387]  ? parameqn+0x80/0x90
[   16.020387]  ? kasan_unpoison_shadow+0x33/0x40
[   16.020387]  kernel_init_freeable+0x2b8/0x313
[   16.020387]  ? rest_init+0xd6/0xd6
[   16.020387]  kernel_init+0xd/0x11a
[   16.020387]  ret_from_fork+0x22/0x30
[   16.020387] 
[   16.020387] addr ffffc9000001f8e4 is located in stack of task swapper/0/1 at offset 28 in frame:
[   16.020387]  __freq_reg_info+0x0/0x170
[   16.020387] 
[   16.020387] this frame has 1 object:
[   16.020387]  [32, 64) 'bws'
[   16.020387] 
[   16.020387] Memory state around the buggy address:
[   16.020387]  ffffc9000001f780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   16.020387]  ffffc9000001f800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   16.020387] >ffffc9000001f880: 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00
[   16.020387]                                                        ^
[   16.020387]  ffffc9000001f900: 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00
[   16.020387]  ffffc9000001f980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   16.020387] ==================================================================
[   16.020387] Disabling lock debugging due to kernel taint
[   16.065939] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   16.073468] usbcore: registered new interface driver catc
[   16.074373] usbcore: registered new interface driver kaweth
[   16.075147] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   16.076356] usbcore: registered new interface driver pegasus
[   16.077286] usbcore: registered new interface driver rtl8150
[   16.078066] hso: drivers/net/usb/hso.c: Option Wireless
[   16.079118] usbcore: registered new interface driver hso
[   16.080014] usbcore: registered new interface driver lan78xx
[   16.080941] usbcore: registered new interface driver cdc_ether
[   16.081861] usbcore: registered new interface driver cdc_eem
[   16.082776] usbcore: registered new interface driver dm9601
[   16.083759] usbcore: registered new interface driver CoreChips
[   16.084773] usbcore: registered new interface driver smsc95xx
[   16.085703] usbcore: registered new interface driver gl620a
[   16.086632] usbcore: registered new interface driver net1080
[   16.087543] usbcore: registered new interface driver rndis_host
[   16.088503] usbcore: registered new interface driver cdc_subset
[   16.089446] usbcore: registered new interface driver kalmia
[   16.090365] usbcore: registered new interface driver ipheth
[   16.091315] usbcore: registered new interface driver sierra_net
[   16.092269] usbcore: registered new interface driver cx82310_eth
[   16.093306] usbcore: registered new interface driver cdc_ncm
[   16.094224] usbcore: registered new interface driver huawei_cdc_ncm
[   16.095202] usbcore: registered new interface driver lg-vl600
[   16.096151] usbcore: registered new interface driver qmi_wwan
[   16.097078] usbcore: registered new interface driver cdc_mbim
[   16.100599] usbcore: registered new interface driver ch9200
[   16.102062] parport0: cannot grant exclusive access for device ks0108
[   16.102925] ks0108: ERROR: parport didn't register new device
[   16.247986] panel: panel driver registered on parport0 (io=0x378).
[   16.252248] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   16.253129] ehci-pci: EHCI PCI platform driver
[   16.253917] ehci-platform: EHCI generic platform driver
[   16.254894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.255875] ohci-pci: OHCI PCI platform driver
[   16.256689] ohci-platform: OHCI generic platform driver
[   16.257770] driver u132_hcd
[   16.258888] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[   16.259689] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[   16.261402] usbcore: registered new interface driver cdc_acm
[   16.262181] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   16.263434] usbcore: registered new interface driver cdc_wdm


To reproduce:

        # build kernel
	cd linux
	cp config-5.9.0-rc2-next-20200827-00021-gdc5ef7078b7777 .config
	make HOSTCC=gcc-9 CC=gcc-9 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email



Thanks,
lkp


[-- Attachment #2: config-5.9.0-rc2-next-20200827-00021-gdc5ef7078b7777 --]
[-- Type: text/plain, Size: 159627 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.9.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-15) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_LD_VERSION=235000000
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_HAVE_SCHED_AVG_IRQ=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_NOCB_CPU is not set
# CONFIG_TASKS_TRACE_RCU_READ_MB is not set
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
# CONFIG_BPF_PRELOAD is not set
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
CONFIG_ACRN_GUEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
CONFIG_PERF_EVENTS_AMD_POWER=y
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_X86_CPA_STATISTICS=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
# CONFIG_ACPI_SPCR_TABLE is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_TINY_POWER_BUTTON is not set
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
# CONFIG_ACPI_THERMAL is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_TABLE_UPGRADE is not set
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_NFIT=y
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_EINJ is not set
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_WATCHDOG=y
# CONFIG_PMIC_OPREGION is not set
CONFIG_ACPI_CONFIGFS=y
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_X86_SYSFB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_SMI=y
CONFIG_GOOGLE_COREBOOT_TABLE=y
CONFIG_GOOGLE_MEMCONSOLE=y
# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=y
CONFIG_GOOGLE_VPD=y
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_LOCK_EVENT_COUNTS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_DEBUG_FS is not set
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
# CONFIG_CLEANCACHE is not set
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZSWAP is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_PTE_DEVMAP=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_BENCHMARK=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
CONFIG_MPTCP_IPV6=y
CONFIG_MPTCP_KUNIT_TESTS=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_MASQUERADE=y
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# end of Core Netfilter Configuration

# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_RAW is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_RAW is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=y
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_PRIO is not set
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_ETF=y
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_SKBPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_CAKE=y
# CONFIG_NET_SCH_FQ is not set
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_FQ_PIE=y
CONFIG_NET_SCH_PLUG=y
CONFIG_NET_SCH_ETS=y
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_CLS_BPF is not set
CONFIG_NET_CLS_FLOWER=y
CONFIG_NET_CLS_MATCHALL=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_BLA=y
CONFIG_BATMAN_ADV_DAT=y
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_MCAST=y
# CONFIG_BATMAN_ADV_DEBUGFS is not set
# CONFIG_BATMAN_ADV_DEBUG is not set
# CONFIG_BATMAN_ADV_SYSFS is not set
CONFIG_BATMAN_ADV_TRACING=y
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_HYPERV_VSOCKETS=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
# CONFIG_MPLS_IPTUNNEL is not set
# CONFIG_NET_NSH is not set
CONFIG_HSR=y
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# end of AX.25 network device drivers

# CONFIG_CAN is not set
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=y
# CONFIG_BT_HCIUART_H4 is not set
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
# CONFIG_BT_HCIDTL1 is not set
CONFIG_BT_HCIBT3C=y
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# end of Bluetooth device drivers

# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_NOINLINE is not set
# CONFIG_MAC80211_VERBOSE_DEBUG is not set
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_OCB_DEBUG is not set
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set

#
# DesignWare PCI Core Support
#
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_CACHE is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_PM_QOS_KUNIT_TEST=y
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_REGMAP_SOUNDWIRE=y
CONFIG_REGMAP_I3C=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_SIMPLE_PM_BUS is not set
CONFIG_MHI_BUS=y
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_GNSS=y
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=y
CONFIG_FTL=y
CONFIG_NFTL=y
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=y
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=y
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_PSTORE=y
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_AMD76XROM=y
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_NETtel is not set
CONFIG_MTD_L440GX=y
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SLRAM=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
# end of Self-contained MTD device drivers

#
# NAND
#
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=y
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_FD=y
CONFIG_CDROM=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
CONFIG_XEN_BLKDEV_BACKEND=y
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_MULTIPATH is not set
CONFIG_NVME_HWMON=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_SRAM=y
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=y
# CONFIG_PVPANIC is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_IDT_89HPESX=y
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=y
CONFIG_ALTERA_STAPL=y
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC & related support
#
# CONFIG_INTEL_MIC_BUS is not set
# CONFIG_SCIF_BUS is not set
CONFIG_VOP_BUS=y
CONFIG_VOP=y
# end of Intel MIC & related support

# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
CONFIG_MISC_RTSX_USB=y
# CONFIG_HABANA_AI is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_HOST_SMP is not set
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFSHCD_PCI is not set
CONFIG_SCSI_UFSHCD_PLATFORM=y
# CONFIG_SCSI_UFS_CDNS_PLATFORM is not set
# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set
CONFIG_SCSI_UFS_BSG=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=y
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
CONFIG_SCSI_IMM=y
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_FORCE=y
# CONFIG_ATA_ACPI is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_CEVA=y
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
# CONFIG_BCACHE_ASYNC_REGISTRATION is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=y
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_UNSTRIPED=y
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=y
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_MULTIPATH_HST=y
CONFIG_DM_DELAY=y
# CONFIG_DM_DUST is not set
# CONFIG_DM_INIT is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
CONFIG_DM_INTEGRITY=y
CONFIG_DM_ZONED=y
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
# CONFIG_NET_CORE is not set
# CONFIG_ARCNET is not set
CONFIG_CAIF_DRIVERS=y
# CONFIG_CAIF_TTY is not set
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set
# CONFIG_CAIF_VIRTIO is not set

#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_I40E is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_CAVIUM=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_HISI_FEMAC=y
CONFIG_MDIO_IPQ4019=y
CONFIG_MDIO_IPQ8064=y
CONFIG_MDIO_MSCC_MIIM=y
# CONFIG_MDIO_MVUSB is not set
CONFIG_MDIO_OCTEON=y
# CONFIG_MDIO_THUNDER is not set
# CONFIG_MDIO_XPCS is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_ADIN_PHY=y
CONFIG_AMD_PHY=y
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BROADCOM_PHY=y
# CONFIG_BCM54140_PHY is not set
CONFIG_BCM84881_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
# CONFIG_DP83822_PHY is not set
CONFIG_DP83TC811_PHY=y
# CONFIG_DP83848_PHY is not set
CONFIG_DP83867_PHY=y
# CONFIG_DP83869_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_LXT_PHY=y
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_NXP_TJA11XX_PHY=y
# CONFIG_AT803X_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_XILINX_GMII2RGMII=y
CONFIG_PLIP=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_RTL8152 is not set
CONFIG_USB_LAN78XX=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_AX88179_178A is not set
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
CONFIG_USB_NET_SR9800=y
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_USB_NET_CH9200=y
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_AIRO_CS=y
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WLAN_VENDOR_RALINK is not set
# CONFIG_WLAN_VENDOR_REALTEK is not set
# CONFIG_WLAN_VENDOR_RSI is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
# CONFIG_WLAN_VENDOR_ZYDAS is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_MAC80211_HWSIM=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_VIRT_WIFI=y

#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
# end of WiMAX Wireless Broadband devices

# CONFIG_WAN is not set
# CONFIG_IEEE802154_DRIVERS is not set
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
# CONFIG_VMXNET3 is not set
CONFIG_FUJITSU_ES=y
# CONFIG_HYPERV_NET is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
CONFIG_NVM=y
CONFIG_NVM_PBLK=y
CONFIG_NVM_PBLK_DEBUG=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_SAMSUNG=y
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_IQS62X=y
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
# CONFIG_KEYBOARD_TWL4030 is not set
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_CROS_EC is not set
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_KEYBOARD_BCM=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AS5011=y
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
CONFIG_JOYSTICK_FSIA6B=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
# CONFIG_TOUCHSCREEN_ADC is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=y
CONFIG_TOUCHSCREEN_CY8CTMA140=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
CONFIG_TOUCHSCREEN_ST1232=y
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=y
# CONFIG_TOUCHSCREEN_ZFORCE is not set
CONFIG_TOUCHSCREEN_ROHM_BU21023=y
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ARIZONA_HAPTICS=y
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
CONFIG_INPUT_BMA150=y
# CONFIG_INPUT_E3X0_BUTTON is not set
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX77650_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_ATI_REMOTE2 is not set
CONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
# CONFIG_INPUT_RETU_PWRBUTTON is not set
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_TWL4030_VIBRA is not set
CONFIG_INPUT_TWL6040_VIBRA=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF50633_PMU=y
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
CONFIG_INPUT_PWM_VIBRA=y
CONFIG_INPUT_RK805_PWRKEY=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA9055_ONKEY is not set
CONFIG_INPUT_DA9063_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_IQS269A=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
CONFIG_INPUT_DRV2665_HAPTICS=y
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_INPUT_STPMIC1_ONKEY is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=y
# CONFIG_HYPERV_KEYBOARD is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_MEN_MCB=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_ASPEED_VUART=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SIFIVE=y
CONFIG_SERIAL_SIFIVE_CONSOLE=y
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
CONFIG_SERIAL_XILINX_PS_UART=y
# CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_FSL_LINFLEXUART=y
# CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE is not set
CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
# CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE is not set
# CONFIG_SERIAL_MEN_Z135 is not set
CONFIG_SERIAL_SPRD=y
CONFIG_SERIAL_SPRD_CONSOLE=y
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
CONFIG_N_GSM=y
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_IPMB_DEVICE_INTERFACE is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_CCTRNG=y
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=y
# CONFIG_SCR24X is not set
CONFIG_IPWIRELESS=y
# end of PCMCIA character devices

CONFIG_MWAVE=y
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set
CONFIG_NVRAM=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_DEVPORT=y
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
# end of Character devices

# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_GPMUX=y
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=y
CONFIG_I2C_MUX_MLXCPLD=y
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
# end of I2C Algorithms

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
# CONFIG_I2C_KEMPLD is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
# CONFIG_I2C_DLN2 is not set
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_ROBOTFUZZ_OSIF=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_I2C_FSI is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

CONFIG_I3C=y
CONFIG_CDNS_I3C_MASTER=y
CONFIG_DW_I3C_MASTER=y
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_PARPORT is not set
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_KVM=y
CONFIG_PTP_1588_CLOCK_IDT82P33=y
CONFIG_PTP_1588_CLOCK_IDTCM=y
CONFIG_PTP_1588_CLOCK_VMW=y
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_PINMUX=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AS3722=y
# CONFIG_PINCTRL_AXP209 is not set
# CONFIG_PINCTRL_AMD is not set
CONFIG_PINCTRL_DA9062=y
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_STMFX=y
# CONFIG_PINCTRL_MAX77620 is not set
# CONFIG_PINCTRL_PALMAS is not set
CONFIG_PINCTRL_RK805=y
CONFIG_PINCTRL_OCELOT=y
# CONFIG_PINCTRL_BAYTRAIL is not set
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_LYNXPOINT=y
CONFIG_PINCTRL_INTEL=y
CONFIG_PINCTRL_BROXTON=y
CONFIG_PINCTRL_CANNONLAKE=y
CONFIG_PINCTRL_CEDARFORK=y
CONFIG_PINCTRL_DENVERTON=y
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
CONFIG_PINCTRL_ICELAKE=y
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_PINCTRL_TIGERLAKE=y
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_CADENCE=y
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_ICH is not set
CONFIG_GPIO_LOGICVC=y
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
CONFIG_GPIO_SIOX=y
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_WCD934X is not set
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_AMD_FCH=y
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=y
CONFIG_GPIO_WS16C48=y
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
CONFIG_GPIO_ADNP=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_MAX7300=y
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_ARIZONA is not set
# CONFIG_GPIO_BD70528 is not set
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_DLN2=y
# CONFIG_GPIO_KEMPLD is not set
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_LP87565=y
# CONFIG_GPIO_MAX77620 is not set
# CONFIG_GPIO_MAX77650 is not set
CONFIG_GPIO_MSIC=y
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_RC5T583 is not set
# CONFIG_GPIO_TC3589X is not set
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TPS65218=y
# CONFIG_GPIO_TPS65910 is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TQMX86=y
# CONFIG_GPIO_TWL4030 is not set
CONFIG_GPIO_TWL6040=y
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8994 is not set
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# CONFIG_GPIO_SODAVILLE is not set
# end of PCI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=y
# end of USB GPIO expanders

# CONFIG_GPIO_AGGREGATOR is not set
CONFIG_GPIO_MOCKUP=y
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
CONFIG_W1_MASTER_GPIO=y
CONFIG_W1_MASTER_SGI=y
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set
# end of 1-wire Slaves

CONFIG_POWER_AVS=y
CONFIG_QCOM_CPR=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_POWER_SUPPLY_HWMON is not set
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
CONFIG_BATTERY_ACT8945A=y
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
CONFIG_MANAGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9030=y
# CONFIG_CHARGER_DA9150 is not set
CONFIG_BATTERY_DA9150=y
# CONFIG_AXP20X_POWER is not set
CONFIG_AXP288_CHARGER=y
# CONFIG_AXP288_FUEL_GAUGE is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
# CONFIG_BATTERY_TWL4030_MADC is not set
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
CONFIG_CHARGER_DETECTOR_MAX14656=y
# CONFIG_CHARGER_MAX77650 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ2515X=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65217 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_CROS_USBPD is not set
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD70528=y
CONFIG_CHARGER_BD99954=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM1177=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_AXI_FAN_CONTROL=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_AMD_ENERGY is not set
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_CORSAIR_CPRO=y
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9055=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_GSC=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC2947=y
CONFIG_SENSORS_LTC2947_I2C=y
CONFIG_SENSORS_LTC2990=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31730=y
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT7802 is not set
CONFIG_SENSORS_NCT7904=y
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_BEL_PFE=y
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
CONFIG_SENSORS_IR35221=y
CONFIG_SENSORS_IR38064=y
CONFIG_SENSORS_IRPS5401=y
CONFIG_SENSORS_ISL68137=y
CONFIG_SENSORS_LM25066=y
# CONFIG_SENSORS_LTC2978 is not set
CONFIG_SENSORS_LTC3815=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX16601 is not set
CONFIG_SENSORS_MAX20730=y
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_PXE1610=y
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_XDPE122=y
# CONFIG_SENSORS_ZL6100 is not set
CONFIG_SENSORS_PWM_FAN=y
CONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TMP513=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
# CONFIG_THERMAL_OF is not set
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_THERMAL_MMIO is not set
CONFIG_MAX77620_THERMAL=y
CONFIG_DA9062_THERMAL=y

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
# CONFIG_SOFT_WATCHDOG_PRETIMEOUT is not set
CONFIG_BD70528_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
# CONFIG_DA9063_WATCHDOG is not set
CONFIG_DA9062_WATCHDOG=y
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_MENZ069_WATCHDOG=y
CONFIG_WDAT_WDT=y
# CONFIG_WM831X_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=y
CONFIG_ZIIRAVE_WATCHDOG=y
CONFIG_CADENCE_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
CONFIG_RETU_WATCHDOG=y
CONFIG_STPMIC1_WATCHDOG=y
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=y
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
CONFIG_KEMPLD_WDT=y
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=y
# CONFIG_NV_TCO is not set
CONFIG_60XX_WDT=y
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_TQMX86_WDT=y
# CONFIG_VIA_WDT is not set
CONFIG_W83627HF_WDT=y
# CONFIG_W83877F_WDT is not set
CONFIG_W83977F_WDT=y
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y
CONFIG_NI903X_WDT=y
CONFIG_NIC7018_WDT=y
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_ACT8945A=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
# CONFIG_MFD_BD9571MWV is not set
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_CROS_EC_DEV=y
# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_I2C is not set
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_GATEWORKS_GSC=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_MFD_MP2629 is not set
CONFIG_MFD_HI6421_PMIC=y
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC_BXTWC is not set
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=y
CONFIG_INTEL_SOC_PMIC_MRFLD=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
CONFIG_MFD_INTEL_MSIC=y
CONFIG_MFD_INTEL_PMC_BXT=y
CONFIG_MFD_IQS62X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6360=y
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not set
CONFIG_PCF50633_GPIO=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RK808=y
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SKY81452=y
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TWL4030_AUDIO is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
CONFIG_MFD_TQMX86=y
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_ROHM_BD70528=y
# CONFIG_MFD_ROHM_BD71828 is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
CONFIG_MFD_WCD934X=y
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_88PM800 is not set
# CONFIG_REGULATOR_88PM8607 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=y
# CONFIG_REGULATOR_AD5398 is not set
CONFIG_REGULATOR_ARIZONA_LDO1=y
# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
# CONFIG_REGULATOR_BCM590XX is not set
CONFIG_REGULATOR_BD70528=y
CONFIG_REGULATOR_BD718XX=y
CONFIG_REGULATOR_CROS_EC=y
# CONFIG_REGULATOR_DA903X is not set
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
# CONFIG_REGULATOR_DA9063 is not set
# CONFIG_REGULATOR_DA9210 is not set
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FAN53880=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI6421=y
CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LM363X is not set
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX77650=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77802 is not set
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_MCP16502=y
CONFIG_REGULATOR_MP5416=y
CONFIG_REGULATOR_MP8859=y
CONFIG_REGULATOR_MP886X=y
CONFIG_REGULATOR_MPQ7920=y
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6360 is not set
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PCA9450=y
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
# CONFIG_REGULATOR_RC5T583 is not set
CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_ROHM=y
# CONFIG_REGULATOR_RT4801 is not set
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STPMIC1 is not set
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65132=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65218=y
CONFIG_REGULATOR_TPS65910=y
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_VCTRL is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_RCMM_DECODER=y
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_XEN is not set

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_QCOM_WLED=y
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=y
# CONFIG_BACKLIGHT_ADP5520 is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_PANDORA=y
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support

CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
CONFIG_SND_PCM_XRUN_DEBUG=y
# CONFIG_SND_CTL_VALIDATION is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_VIRMIDI=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=y
CONFIG_SND_ALOOP=y
CONFIG_SND_VIRMIDI=y
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
# end of HD-Audio

CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_UA101=y
CONFIG_SND_USB_USX2Y=y
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
CONFIG_SND_USB_HIFACE=y
CONFIG_SND_BCD2000=y
CONFIG_SND_USB_LINE6=y
CONFIG_SND_USB_POD=y
# CONFIG_SND_USB_PODHD is not set
CONFIG_SND_USB_TONEPORT=y
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=y
# CONFIG_SND_SOC_AMD_ACP3x is not set
# CONFIG_SND_SOC_AMD_RENOIR is not set
CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_SOC_MIKROE_PROTO=y
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
CONFIG_SND_DESIGNWARE_I2S=y
CONFIG_SND_DESIGNWARE_PCM=y

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
CONFIG_SND_SOC_FSL_MQS=y
CONFIG_SND_SOC_FSL_AUDMIX=y
CONFIG_SND_SOC_FSL_SSI=y
# CONFIG_SND_SOC_FSL_SPDIF is not set
CONFIG_SND_SOC_FSL_ESAI=y
CONFIG_SND_SOC_FSL_MICFIL=y
CONFIG_SND_SOC_FSL_EASRC=y
CONFIG_SND_SOC_IMX_AUDMUX=y
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
CONFIG_SND_SOC_IMG=y
# CONFIG_SND_SOC_IMG_I2S_IN is not set
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
# CONFIG_SND_SOC_IMG_PARALLEL_OUT is not set
CONFIG_SND_SOC_IMG_SPDIF_IN=y
CONFIG_SND_SOC_IMG_SPDIF_OUT=y
# CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC is not set
# CONFIG_SND_SOC_INTEL_SST_TOPLEVEL is not set
CONFIG_SND_SOC_MTK_BTCVSD=y
CONFIG_SND_SOC_SOF_TOPLEVEL=y
# CONFIG_SND_SOC_SOF_PCI is not set
CONFIG_SND_SOC_SOF_ACPI=y
CONFIG_SND_SOC_SOF_OF=y
# CONFIG_SND_SOC_SOF_DEBUG_PROBES is not set
CONFIG_SND_SOC_SOF=y
# CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL is not set

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

# CONFIG_SND_SOC_XILINX_I2S is not set
CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER=y
CONFIG_SND_SOC_XILINX_SPDIF=y
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_ZX_TDM=y
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_ADAU7118=y
CONFIG_SND_SOC_ADAU7118_HW=y
CONFIG_SND_SOC_ADAU7118_I2C=y
# CONFIG_SND_SOC_AK4118 is not set
CONFIG_SND_SOC_AK4458=y
# CONFIG_SND_SOC_AK4554 is not set
CONFIG_SND_SOC_AK4613=y
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
CONFIG_SND_SOC_CROS_EC_CODEC=y
# CONFIG_SND_SOC_CS35L32 is not set
CONFIG_SND_SOC_CS35L33=y
# CONFIG_SND_SOC_CS35L34 is not set
CONFIG_SND_SOC_CS35L35=y
# CONFIG_SND_SOC_CS35L36 is not set
# CONFIG_SND_SOC_CS42L42 is not set
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
# CONFIG_SND_SOC_CS4341 is not set
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=y
CONFIG_SND_SOC_DA7213=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
# CONFIG_SND_SOC_ES8316 is not set
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
CONFIG_SND_SOC_GTM601=y
CONFIG_SND_SOC_INNO_RK3036=y
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
CONFIG_SND_SOC_MAX9867=y
CONFIG_SND_SOC_MAX98927=y
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX98373_I2C=y
CONFIG_SND_SOC_MAX98373_SDW=y
CONFIG_SND_SOC_MAX98390=y
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=y
# CONFIG_SND_SOC_PCM1789_I2C is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM186X_I2C is not set
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
# CONFIG_SND_SOC_PCM3168A_I2C is not set
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
# CONFIG_SND_SOC_RK3328 is not set
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT1308_SDW=y
CONFIG_SND_SOC_RT5616=y
CONFIG_SND_SOC_RT5631=y
CONFIG_SND_SOC_RT5645=y
# CONFIG_SND_SOC_RT5682_SDW is not set
# CONFIG_SND_SOC_RT700_SDW is not set
CONFIG_SND_SOC_RT711=y
CONFIG_SND_SOC_RT711_SDW=y
# CONFIG_SND_SOC_RT715_SDW is not set
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
CONFIG_SND_SOC_SPDIF=y
# CONFIG_SND_SOC_SSM2305 is not set
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_I2C=y
# CONFIG_SND_SOC_SSM4567 is not set
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
# CONFIG_SND_SOC_TAS2552 is not set
CONFIG_SND_SOC_TAS2562=y
CONFIG_SND_SOC_TAS2770=y
CONFIG_SND_SOC_TAS5086=y
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
CONFIG_SND_SOC_TLV320AIC32X4_I2C=y
# CONFIG_SND_SOC_TLV320AIC3X is not set
# CONFIG_SND_SOC_TLV320ADCX140 is not set
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_TSCS454=y
CONFIG_SND_SOC_UDA1334=y
# CONFIG_SND_SOC_WCD9335 is not set
CONFIG_SND_SOC_WCD934X=y
# CONFIG_SND_SOC_WM8510 is not set
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
# CONFIG_SND_SOC_WM8580 is not set
CONFIG_SND_SOC_WM8711=y
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8737=y
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8782=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8960 is not set
CONFIG_SND_SOC_WM8962=y
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_WM8985=y
# CONFIG_SND_SOC_WSA881X is not set
CONFIG_SND_SOC_ZX_AUD96P22=y
CONFIG_SND_SOC_MAX9759=y
CONFIG_SND_SOC_MT6351=y
CONFIG_SND_SOC_MT6358=y
# CONFIG_SND_SOC_MT6660 is not set
CONFIG_SND_SOC_NAU8540=y
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
# CONFIG_SND_SOC_TPA6130A2 is not set
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
CONFIG_SND_X86=y
CONFIG_SND_XEN_FRONTEND=y

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
CONFIG_HID_BIGBEN_FF=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
CONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=y
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=y
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_GOOGLE_HAMMER=y
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_HIDPP=y
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTI=y
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_RETRODE=y
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_STEAM=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=y
CONFIG_HID_MCP2221=y
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID=y
# end of I2C HID support

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEFAULT_PERSIST is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_UHCI_HCD is not set
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
# CONFIG_USBIP_CORE is not set
CONFIG_USB_CDNS3=y
CONFIG_USB_CDNS3_HOST=y
CONFIG_USB_CDNS3_PCI_WRAP=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_HOST=y

#
# Platform Glue Layer
#

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_ULPI is not set
CONFIG_USB_DWC3_HOST=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y
CONFIG_USB_DWC3_HAPS=y
# CONFIG_USB_DWC3_OF_SIMPLE is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_CHIPIDEA_PCI=y
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1760_HOST_ROLE=y

#
# USB port drivers
#
CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_APPLE_MFI_FASTCHARGE=y
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=y
# CONFIG_USB_HSIC_USB4604 is not set
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_CHAOSKEY=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
CONFIG_USB_ROLES_INTEL_XHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_AAT1290=y
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_AS3645A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
CONFIG_LEDS_BCM6358=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3532=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_LM3692X=y
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
CONFIG_LEDS_LP8860=y
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA955X_GPIO=y
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX77650 is not set
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_MENF21BMC is not set
# CONFIG_LEDS_KTD2692 is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_MLXCPLD is not set
CONFIG_LEDS_MLXREG=y
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_NIC78BX=y
# CONFIG_LEDS_TI_LMU_COMMON is not set
CONFIG_LEDS_TPS6105X=y
CONFIG_LEDS_SGM3140=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=y
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
CONFIG_DMABUF_MOVE_NOTIFY=y
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# CONFIG_DMABUF_HEAPS_CMA is not set
# end of DMABUF options

CONFIG_AUXDISPLAY=y
CONFIG_HD44780=y
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_IMG_ASCII_LCD=y
CONFIG_PARPORT_PANEL=y
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
CONFIG_PANEL_CHANGE_MESSAGE=y
CONFIG_PANEL_BOOT_MESSAGE=""
# CONFIG_CHARLCD_BL_OFF is not set
CONFIG_CHARLCD_BL_ON=y
# CONFIG_CHARLCD_BL_FLASH is not set
CONFIG_PANEL=y
CONFIG_CHARLCD=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_IRQ_BYPASS_MANAGER=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
CONFIG_VDPA=y
CONFIG_VHOST_IOTLB=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
CONFIG_VHOST_VSOCK=y
CONFIG_VHOST_VDPA=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=y
CONFIG_HYPERV_BALLOON=y
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not set
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_PVCALLS_FRONTEND is not set
# CONFIG_XEN_PVCALLS_BACKEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_XEN_FRONT_PGDIR_SHBUF=y
# end of Xen driver support

CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_STAGING=y
CONFIG_PRISM2_USB=y
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
CONFIG_R8712U=y
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# end of Accelerometers

#
# Analog to digital converters
#
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7746=y
# end of Capacitance to digital converters

#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
# end of Active energy metering IC

#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers

# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# end of Android

# CONFIG_STAGING_BOARD is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
CONFIG_MOST_COMPONENTS=y
CONFIG_MOST_CDEV=y
# CONFIG_MOST_NET is not set
# CONFIG_MOST_SOUND is not set
CONFIG_MOST_DIM2=y
# CONFIG_MOST_I2C is not set
CONFIG_GREYBUS_AUDIO=y
# CONFIG_GREYBUS_AUDIO_APB_CODEC is not set
CONFIG_GREYBUS_BOOTROM=y
# CONFIG_GREYBUS_HID is not set
CONFIG_GREYBUS_LIGHT=y
CONFIG_GREYBUS_LOG=y
# CONFIG_GREYBUS_LOOPBACK is not set
# CONFIG_GREYBUS_POWER is not set
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
CONFIG_GREYBUS_BRIDGED_PHY=y
CONFIG_GREYBUS_GPIO=y
# CONFIG_GREYBUS_I2C is not set
CONFIG_GREYBUS_PWM=y
# CONFIG_GREYBUS_UART is not set
# CONFIG_GREYBUS_USB is not set

#
# Gasket devices
#
# CONFIG_STAGING_GASKET_FRAMEWORK is not set
# end of Gasket devices

CONFIG_XIL_AXIS_FIFO=y
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_KPC2000 is not set
# CONFIG_QLGE is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=y
# CONFIG_WMI_BMOF is not set
# CONFIG_ALIENWARE_WMI is not set
CONFIG_HUAWEI_WMI=y
CONFIG_INTEL_WMI_SBL_FW_UPDATE=y
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
CONFIG_MXM_WMI=y
CONFIG_PEAQ_WMI=y
# CONFIG_XIAOMI_WMI is not set
# CONFIG_ACERHDF is not set
CONFIG_ACER_WIRELESS=y
# CONFIG_ACER_WMI is not set
# CONFIG_APPLE_GMUX is not set
CONFIG_ASUS_LAPTOP=y
CONFIG_ASUS_WIRELESS=y
# CONFIG_DCDBAS is not set
CONFIG_DELL_SMBIOS=y
CONFIG_DELL_SMBIOS_WMI=y
# CONFIG_DELL_LAPTOP is not set
CONFIG_DELL_RBTN=y
CONFIG_DELL_RBU=y
CONFIG_DELL_SMO8800=y
# CONFIG_DELL_WMI is not set
CONFIG_DELL_WMI_DESCRIPTOR=y
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_WMI_LED=y
# CONFIG_AMILO_RFKILL is not set
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_TABLET=y
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
CONFIG_HP_WIRELESS=y
CONFIG_HP_WMI=y
# CONFIG_IBM_RTL is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_INTEL_ATOMISP2_LED=y
# CONFIG_INTEL_ATOMISP2_PM is not set
CONFIG_INTEL_HID_EVENT=y
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_OAKTRAIL is not set
CONFIG_INTEL_VBTN=y
# CONFIG_SURFACE_3_POWER_OPREGION is not set
CONFIG_SURFACE_PRO3_BUTTON=y
# CONFIG_MSI_LAPTOP is not set
CONFIG_MSI_WMI=y
CONFIG_PCENGINES_APU2=y
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_SAMSUNG_Q10=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_TOSHIBA_WMI=y
# CONFIG_ACPI_CMPC is not set
CONFIG_COMPAL_LAPTOP=y
CONFIG_LG_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
# CONFIG_SONY_LAPTOP is not set
CONFIG_SYSTEM76_ACPI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_I2C_MULTI_INSTANTIATE=y
# CONFIG_MLX_PLATFORM is not set
# CONFIG_TOUCHSCREEN_DMI is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_RST is not set
CONFIG_INTEL_SMARTCONNECT=y

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

CONFIG_INTEL_UNCORE_FREQ_CONTROL=y
# CONFIG_INTEL_CHTDC_TI_PWRBTN is not set
# CONFIG_INTEL_MFLD_THERMAL is not set
# CONFIG_INTEL_MID_POWER_BUTTON is not set
# CONFIG_INTEL_MRFLD_PWRBTN is not set
# CONFIG_INTEL_PMC_CORE is not set
CONFIG_INTEL_PUNIT_IPC=y
CONFIG_INTEL_SCU_IPC=y
CONFIG_INTEL_SCU=y
# CONFIG_INTEL_SCU_PCI is not set
CONFIG_INTEL_SCU_PLATFORM=y
# CONFIG_INTEL_SCU_IPC_UTIL is not set
# CONFIG_INTEL_TELEMETRY is not set
CONFIG_PMC_ATOM=y
CONFIG_MFD_CROS_EC=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=y
# CONFIG_CHROMEOS_PSTORE is not set
CONFIG_CHROMEOS_TBMC=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_RPMSG=y
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
CONFIG_CROS_KBD_LED_BACKLIGHT=y
CONFIG_CROS_EC_CHARDEV=y
# CONFIG_CROS_EC_LIGHTBAR is not set
# CONFIG_CROS_EC_VBC is not set
CONFIG_CROS_EC_DEBUGFS=y
CONFIG_CROS_EC_SENSORHUB=y
CONFIG_CROS_EC_SYSFS=y
CONFIG_CROS_USBPD_NOTIFY=y
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_WM831X=y
# CONFIG_CLK_HSDK is not set
CONFIG_COMMON_CLK_MAX77686=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_RK808 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_SI570=y
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CDCE925=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_PALMAS=y
CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_VC5=y
CONFIG_COMMON_CLK_BD718XX=y
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_CLK_LGM_CGU=y
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_PLATFORM_MHU is not set
CONFIG_PCC=y
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_QCOM_GLINK=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
CONFIG_SOUNDWIRE_CADENCE=y
CONFIG_SOUNDWIRE_INTEL=y
# CONFIG_SOUNDWIRE_QCOM is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
CONFIG_XILINX_VCU=y
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_ARIZONA is not set
CONFIG_EXTCON_AXP288=y
CONFIG_EXTCON_FSA9480=y
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_INTEL_MRFLD=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_EXTCON_USBC_CROS_EC is not set
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
CONFIG_IIO_SW_TRIGGER=y

#
# Accelerometers
#
# CONFIG_ADXL372_I2C is not set
CONFIG_BMA400=y
CONFIG_BMA400_I2C=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_DA280=y
# CONFIG_DA311 is not set
# CONFIG_DMARD06 is not set
CONFIG_DMARD09=y
CONFIG_DMARD10=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=y
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
CONFIG_STK8312=y
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7091R5 is not set
# CONFIG_AD7291 is not set
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
# CONFIG_ADI_AXI_ADC is not set
# CONFIG_AXP20X_ADC is not set
CONFIG_AXP288_ADC=y
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=y
# CONFIG_DLN2_ADC is not set
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_HX711=y
# CONFIG_INTEL_MRFLD_ADC is not set
CONFIG_LTC2471=y
CONFIG_LTC2485=y
# CONFIG_LTC2497 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
CONFIG_MCP3422=y
CONFIG_MEN_Z188_ADC=y
CONFIG_NAU7802=y
CONFIG_PALMAS_GPADC=y
CONFIG_SD_ADC_MODULATOR=y
CONFIG_TI_ADC081C=y
CONFIG_TI_ADS1015=y
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TWL4030_MADC=y
CONFIG_TWL6030_GPADC=y
# CONFIG_VF610_ADC is not set
CONFIG_VIPERBOARD_ADC=y
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters

#
# Analog Front Ends
#
# CONFIG_IIO_RESCALE is not set
# end of Analog Front Ends

#
# Amplifiers
#
# CONFIG_HMC425 is not set
# end of Amplifiers

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_ATLAS_EZO_SENSOR=y
CONFIG_BME680=y
CONFIG_BME680_I2C=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
CONFIG_SCD30_CORE=y
# CONFIG_SCD30_I2C is not set
CONFIG_SENSIRION_SGP30=y
CONFIG_SPS30=y
# CONFIG_VZ89X is not set
# end of Chemical Sensors

CONFIG_IIO_CROS_EC_SENSORS_CORE=y
CONFIG_IIO_CROS_EC_SENSORS=y
# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
CONFIG_AD5446=y
# CONFIG_AD5593R is not set
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
CONFIG_DPOT_DAC=y
CONFIG_DS4424=y
CONFIG_M62332=y
# CONFIG_MAX517 is not set
CONFIG_MAX5821=y
CONFIG_MCP4725=y
# CONFIG_TI_DAC5571 is not set
CONFIG_VF610_DAC=y
# end of Digital to analog converters

#
# IIO dummy driver
#
# end of IIO dummy driver

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_HID_SENSOR_GYRO_3D=y
# CONFIG_MPU3050_I2C is not set
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
# CONFIG_DHT11 is not set
CONFIG_HDC100X=y
CONFIG_HID_SENSOR_HUMIDITY=y
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
CONFIG_SI7005=y
# CONFIG_SI7020 is not set
# end of Humidity sensors

#
# Inertial measurement units
#
# CONFIG_BMI160_I2C is not set
CONFIG_FXOS8700=y
CONFIG_FXOS8700_I2C=y
CONFIG_KMX61=y
CONFIG_INV_ICM42600=y
CONFIG_INV_ICM42600_I2C=y
# CONFIG_INV_MPU6050_I2C is not set
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_I3C=y
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=y
# CONFIG_ADUX1020 is not set
# CONFIG_AL3010 is not set
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
CONFIG_CM32181=y
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
CONFIG_CM3605=y
CONFIG_CM36651=y
CONFIG_IIO_CROS_EC_LIGHT_PROX=y
CONFIG_GP2AP002=y
CONFIG_GP2AP020A00F=y
# CONFIG_IQS621_ALS is not set
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
# CONFIG_HID_SENSOR_ALS is not set
CONFIG_HID_SENSOR_PROX=y
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=y
# CONFIG_SENSORS_LM3533 is not set
# CONFIG_LTR501 is not set
# CONFIG_LV0104CS is not set
# CONFIG_MAX44000 is not set
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
# CONFIG_SI1145 is not set
CONFIG_STK3310=y
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL2772=y
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
CONFIG_VCNL4000=y
# CONFIG_VCNL4035 is not set
CONFIG_VEML6030=y
CONFIG_VEML6070=y
CONFIG_VL6180=y
# CONFIG_ZOPT2201 is not set
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
# CONFIG_MAG3110 is not set
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
# CONFIG_SENSORS_RM3100_I2C is not set
# end of Magnetometer sensors

#
# Multiplexers
#
# CONFIG_IIO_MUX is not set
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
CONFIG_HID_SENSOR_DEVICE_ROTATION=y
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone

#
# Linear and angular position sensors
#
CONFIG_IQS624_POS=y
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5272=y
# CONFIG_DS1803 is not set
CONFIG_MAX5432=y
CONFIG_MCP4018=y
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=y
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_IIO_CROS_EC_BARO=y
# CONFIG_DLHL60D is not set
CONFIG_DPS310=y
CONFIG_HID_SENSOR_PRESS=y
# CONFIG_HP03 is not set
# CONFIG_ICP10100 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL3115 is not set
CONFIG_MS5611=y
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=y
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=y
# CONFIG_HP206C is not set
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_MB1232=y
# CONFIG_PING is not set
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX9310=y
CONFIG_SX9500=y
# CONFIG_SRF08 is not set
CONFIG_VCNL3020=y
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_IQS620AT_TEMP=y
# CONFIG_HID_SENSOR_TEMP is not set
# CONFIG_MLX90614 is not set
CONFIG_MLX90632=y
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
# end of Temperature sensors

# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_CROS_EC is not set
CONFIG_PWM_FSL_FTM=y
CONFIG_PWM_IQS620A=y
CONFIG_PWM_LP3943=y
CONFIG_PWM_LPSS=y
# CONFIG_PWM_LPSS_PCI is not set
CONFIG_PWM_LPSS_PLATFORM=y
# CONFIG_PWM_PCA9685 is not set
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# end of IRQ chip support

CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_BRCMSTB_RESCAL=y
# CONFIG_RESET_INTEL_GW is not set
CONFIG_RESET_TI_SYSCON=y

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
CONFIG_PHY_CADENCE_TORRENT=y
CONFIG_PHY_CADENCE_DPHY=y
# CONFIG_PHY_CADENCE_SIERRA is not set
CONFIG_PHY_CADENCE_SALVO=y
CONFIG_PHY_FSL_IMX8MQ_USB=y
CONFIG_PHY_MIXEL_MIPI_DPHY=y
CONFIG_PHY_PXA_28NM_HSIC=y
CONFIG_PHY_PXA_28NM_USB2=y
CONFIG_PHY_CPCAP_USB=y
# CONFIG_PHY_MAPPHONE_MDM6600 is not set
CONFIG_PHY_OCELOT_SERDES=y
# CONFIG_PHY_QCOM_USB_HS is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
CONFIG_PHY_TUSB1210=y
# CONFIG_PHY_INTEL_COMBO is not set
# CONFIG_PHY_INTEL_EMMC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
CONFIG_MCB=y
# CONFIG_MCB_PCI is not set
CONFIG_MCB_LPC=y

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID is not set
# end of Android

CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
# CONFIG_ND_BLK is not set
# CONFIG_BTT is not set
CONFIG_OF_PMEM=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_DEV_DAX_KMEM=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y

#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
CONFIG_STM_PROTO_SYS_T=y
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
# CONFIG_STM_SOURCE_HEARTBEAT is not set
CONFIG_STM_SOURCE_FTRACE=y
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_ACPI=y
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
CONFIG_INTEL_TH_MSU=y
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

CONFIG_FPGA=y
# CONFIG_ALTERA_PR_IP_CORE is not set
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
# CONFIG_FPGA_BRIDGE is not set
# CONFIG_FPGA_DFL is not set
CONFIG_FSI=y
# CONFIG_FSI_NEW_DEV_NODE is not set
CONFIG_FSI_MASTER_GPIO=y
# CONFIG_FSI_MASTER_HUB is not set
# CONFIG_FSI_MASTER_ASPEED is not set
CONFIG_FSI_SCOM=y
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
CONFIG_TEE=y

#
# TEE drivers
#
# end of TEE drivers

CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_UNISYS_VISORBUS=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
CONFIG_INTERCONNECT=y
CONFIG_COUNTER=y
CONFIG_FTM_QUADDEC=y
CONFIG_MICROCHIP_TCB_CAPTURE=y
CONFIG_MOST=y
# CONFIG_MOST_USB_HDM is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_ZONEFS_FS=y
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_MOUNT_NOTIFICATIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_TMPFS_INODE64=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_FS_WBUF_VERIFY=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
# CONFIG_SQUASHFS_XATTR is not set
# CONFIG_SQUASHFS_ZLIB is not set
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
# CONFIG_SQUASHFS_XZ is not set
CONFIG_SQUASHFS_ZSTD=y
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_QNX6FS_FS=y
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4"
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
CONFIG_PSTORE_ZONE=y
CONFIG_PSTORE_BLK=y
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
CONFIG_PSTORE_BLK_CONSOLE_SIZE=64
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_BIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
CONFIG_CRYPTO_ENGINE=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_ECRDSA=y
CONFIG_CRYPTO_CURVE25519=y
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=y
CONFIG_CRYPTO_XXHASH=y
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_BLAKE2S_X86=y
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_STREEBOG=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_BLOWFISH_X86_64=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DES3_EDE_X86_64=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_STATS=y
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=y
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_CCP is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
CONFIG_CRYPTO_DEV_AMLOGIC_GXL=y
CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=y
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
CONFIG_STRING_SELFTEST=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
CONFIG_UBSAN_TRAP=y
# CONFIG_UBSAN_BOUNDS is not set
CONFIG_UBSAN_MISC=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_TEST_UBSAN is not set
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_POISONING_NO_SANITY=y
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
CONFIG_KASAN_OUTLINE=y
# CONFIG_KASAN_INLINE is not set
CONFIG_KASAN_STACK=1
CONFIG_KASAN_VMALLOC=y
# CONFIG_TEST_KASAN is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_TRACE_IRQFLAGS=y
CONFIG_TRACE_IRQFLAGS_NMI=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_RCU_STRICT_GRACE_PERIOD is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_DYNAMIC_FTRACE is not set
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_STACK_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
CONFIG_TRACE_EVENT_INJECT=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
CONFIG_SYNTH_EVENT_GEN_TEST=y
CONFIG_HIST_TRIGGERS_DEBUG=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y

#
# x86 Debugging
#
# CONFIG_DEBUG_AID_FOR_SYZBOT is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=y
CONFIG_KUNIT_EXAMPLE_TEST=y
CONFIG_KUNIT_ALL_TESTS=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 4810 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='boot'
	export testcase='boot'
	export category='functional'
	export timeout='10m'
	export job_origin='/lkp-src/allot/rand/vm-snb/boot.yaml'
	export queue_cmdline_keys='branch
commit
queue_at_least_once'
	export queue='validate'
	export testbox='vm-snb-104'
	export tbox_group='vm-snb'
	export branch='linux-review/Thomas-Pedersen/add-initial-S1G-support/20200828-063630'
	export commit='dc5ef7078b77772b5e2ff5a57cd87144c4c9a583'
	export kconfig='x86_64-randconfig-a011-20200828'
	export repeat_to=4
	export nr_vm=64
	export submit_id='5f49a59a35b0241793919aba'
	export job_file='/lkp/jobs/scheduled/vm-snb-104/boot-1-quantal-i386-core-20190426.cgz-dc5ef7078b77772b5e2ff5a57cd87144c4c9a583-20200829-6035-5r7nvc-2.yaml'
	export id='c402e1691b9f5604a48447e1cdc2707cc25d2690'
	export queuer_version='/lkp-src'
	export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
	export nr_cpu=2
	export memory='8G'
	export hdd_partitions='/dev/vda /dev/vdb /dev/vdc /dev/vdd /dev/vde /dev/vdf'
	export swap_partitions='/dev/vdg'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export ssh_base_port=23032
	export rootfs='quantal-i386-core-20190426.cgz'
	export compiler='gcc-9'
	export enqueue_time='2020-08-29 08:47:23 +0800'
	export _id='5f49a59a35b0241793919aba'
	export _rt='/result/boot/1/vm-snb/quantal-i386-core-20190426.cgz/x86_64-randconfig-a011-20200828/gcc-9/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583'
	export user='lkp'
	export result_root='/result/boot/1/vm-snb/quantal-i386-core-20190426.cgz/x86_64-randconfig-a011-20200828/gcc-9/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583/3'
	export scheduler_version='/lkp/lkp/.src-20200828-133014'
	export LKP_SERVER='inn'
	export arch='i386'
	export max_uptime=600
	export initrd='/osimage/quantal/quantal-i386-core-20190426.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/vm-snb-104/boot-1-quantal-i386-core-20190426.cgz-dc5ef7078b77772b5e2ff5a57cd87144c4c9a583-20200829-6035-5r7nvc-2.yaml
ARCH=x86_64
kconfig=x86_64-randconfig-a011-20200828
branch=linux-review/Thomas-Pedersen/add-initial-S1G-support/20200828-063630
commit=dc5ef7078b77772b5e2ff5a57cd87144c4c9a583
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-a011-20200828/gcc-9/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583/vmlinuz-5.9.0-rc2-next-20200827-00021-gdc5ef7078b7777
max_uptime=600
RESULT_ROOT=/result/boot/1/vm-snb/quantal-i386-core-20190426.cgz/x86_64-randconfig-a011-20200828/gcc-9/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583/3
LKP_SERVER=inn
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-randconfig-a011-20200828/gcc-9/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583/modules.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export schedule_notify_address=
	export queue_at_least_once=1
	export kernel='/pkg/linux/x86_64-randconfig-a011-20200828/gcc-9/dc5ef7078b77772b5e2ff5a57cd87144c4c9a583/vmlinuz-5.9.0-rc2-next-20200827-00021-gdc5ef7078b7777'
	export dequeue_time='2020-08-29 08:48:03 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-snb-104/boot-1-quantal-i386-core-20190426.cgz-dc5ef7078b77772b5e2ff5a57cd87144c4c9a583-20200829-6035-5r7nvc-2.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-slabinfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper boot-meminfo
	run_monitor $LKP_SRC/monitors/one-shot/wrapper memmap
	run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper sleep 1
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper boot-slabinfo
	$LKP_SRC/stats/wrapper boot-meminfo
	$LKP_SRC/stats/wrapper memmap
	$LKP_SRC/stats/wrapper boot-memory
	$LKP_SRC/stats/wrapper boot-time
	$LKP_SRC/stats/wrapper kernel-size
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper sleep
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time sleep.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 18316 bytes --]

Re: [PATCH 21/22] mac80211_hwsim: indicate support for S1G

[Thomas Pedersen]

On 2020-08-28 00:52, Kalle Valo wrote:
> Thomas Pedersen <thomas@adapt-ip.com> writes:
> 
>> Advertise S1G Capabilities and channels to mac80211.
>> 
>> Requires a few fixups to account for missing
>> sband->bitrates, and a custom regulatory db to actually
>> enable the S1G channels.
>> 
>> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
>> ---
>>  drivers/net/wireless/mac80211_hwsim.c | 80 
>> ++++++++++++++++++++++++---
>>  include/linux/ieee80211.h             | 12 +++-
> 
> IMHO a mac80211_hwsim patch should not touch ieee80211.h.

Fair enough, I'll split it out.

>> --- a/include/linux/ieee80211.h
>> +++ b/include/linux/ieee80211.h
>> @@ -2385,6 +2385,9 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
>>  	return spr_len;
>>  }
>> 
>> +#define SM(f, v)	(((v) << f##_SHIFT) & f)
>> +#define MS(f, v)	(((v) & f) >> f##_SHIFT)
>> +
>>  /* S1G Capabilities Information field */
>>  #define S1G_CAPAB_B0_S1G_LONG BIT(0)
>>  #define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
>> @@ -2392,9 +2395,16 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
>>  #define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
>>  #define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
>>  #define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
>> -#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
>> +#define S1G_CAPAB_B0_SUPP_CH_WIDTH	(BIT(6) | BIT(7))
>>  #define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
>> 
>> +#define S1G_SUPP_CH_WIDTH_2	0
>> +#define S1G_SUPP_CH_WIDTH_4	1
>> +#define S1G_SUPP_CH_WIDTH_8	2
>> +#define S1G_SUPP_CH_WIDTH_16	3
>> +#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << 
>> MS(S1G_CAPAB_B0_SUPP_CH_WIDTH, \
>> +					     cap[0])) << 1)
> 
> We have GENMASK(), FIELD_GET() & co nowadays so no need for custom
> macros.

Nice. Thanks for the heads up.

-- 
thomas