[PATCH v2 00/22] add support for S1G association

[PATCH v2 00/22] add support for S1G association

[Thomas Pedersen]

This is the initial S1G patchset which adds support for:

- defining the S1G 900MHz bands in a custom regulatory database
- setting and receiving S1G beacons (sending short beacons will be
  supported in a future patch)
- configuring S1G capabilities in Association Request (setting
  capabilities along with NL80211_CMD_SET_STATION will be added later).
- scanning on S1G bands
- handling S1G Association Response format
- correctly encoding Listen Interval for S1G
- associating in mac80211
- testing S1G in mac80211_hwsim

Rate control is still TBD, this patchset simply lops off the rate
control hooks for S1G so eg. missing sband->bitrates and S1G Basic Rate
set can't do too much damage.

Note the mac80211_hwsim S1G support introduces a regression in a few
hostap hwsim tests. This is because when processing the reported bands,
hostap assumes freq < 4000 is 11b, and the actual 11b/g band is
overwritten by the S1G band info. Though it does count as a userspace
regression, I'm not sure there is much to do about it besides apply a
small patch to hostapd which treats freq < 2000 as an unknown band.

After the hostap workaround
(https://lists.infradead.org/pipermail/hostap/2020-August/038748.html),
these patches continue to pass the hwsim tests as well as HEAD.


Thomas Pedersen (22):
  ieee80211: redefine S1G bits with GENMASK
  nl80211: advertise supported channel width in S1G
  cfg80211: regulatory: handle S1G channels
  nl80211: correctly validate S1G beacon head
  nl80211: support setting S1G channels
  {cfg,mac}80211: get correct default channel width for S1G
  mac80211: s1g: choose scanning width based on frequency
  nl80211: support S1G capabilities
  mac80211: support S1G STA capabilities
  cfg80211: convert S1G beacon to scan results
  cfg80211: parse S1G Operation element for BSS channel
  mac80211: convert S1G beacon to scan results
  cfg80211: handle Association Response from S1G STA
  mac80211: encode listen interval for S1G
  mac80211: don't calculate duration for S1G
  mac80211: handle S1G low rates
  mac80211: avoid rate init for S1G band
  mac80211: receive and process S1G beacons
  mac80211: support S1G association
  nl80211: include frequency offset in survey info
  mac80211_hwsim: indicate support for S1G
  mac80211_hwsim: fix TSF timestamp write to S1G beacon

 drivers/net/wireless/mac80211_hwsim.c |  92 +++++++++--
 include/linux/ieee80211.h             | 223 +++++++++++++++++---------
 include/net/cfg80211.h                |  28 ++++
 include/net/mac80211.h                |   3 +
 include/uapi/linux/nl80211.h          |  26 +++
 net/mac80211/cfg.c                    |   2 +
 net/mac80211/chan.c                   |   9 +-
 net/mac80211/ibss.c                   |   3 +-
 net/mac80211/ieee80211_i.h            |  20 +++
 net/mac80211/iface.c                  |   5 +
 net/mac80211/mlme.c                   | 184 +++++++++++++++++----
 net/mac80211/rate.c                   |  39 ++++-
 net/mac80211/rx.c                     |  87 +++++-----
 net/mac80211/scan.c                   |  37 ++++-
 net/mac80211/tx.c                     |   4 +
 net/mac80211/util.c                   | 200 +++++++++++++++++++++++
 net/wireless/chan.c                   | 140 ++++++++++------
 net/wireless/mlme.c                   |  20 +++
 net/wireless/nl80211.c                |  52 +++++-
 net/wireless/reg.c                    |  70 ++++++--
 net/wireless/scan.c                   |  80 +++++++--
 net/wireless/util.c                   |  32 ++++
 22 files changed, 1090 insertions(+), 266 deletions(-)

-- 
2.20.1

[PATCH v2 01/22] ieee80211: redefine S1G bits with GENMASK

[Thomas Pedersen]

The S1G capability fields were defined by ORing BITS()
together, and expecting a custom macro to use the _SHIFT
definitions. Use the Linux kernel GENMASK for the
definitions now, and FIELD_{GET,PREP} to access the fields
in the future.

Take the chance to rename eg. S1G_CAPAB_B0 to the more
compact S1G_CAP0.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h | 156 +++++++++++++++++++-------------------
 1 file changed, 78 insertions(+), 78 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index c47f43e65a2f..53fba39d4ba6 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2330,84 +2330,84 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 }
 
 /* S1G Capabilities Information field */
-#define S1G_CAPAB_B0_S1G_LONG BIT(0)
-#define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
-#define S1G_CAPAB_B0_SGI_2MHZ BIT(2)
-#define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
-#define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
-#define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
-#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
-
-#define S1G_CAPAB_B1_RX_LDPC BIT(0)
-#define S1G_CAPAB_B1_TX_STBC BIT(1)
-#define S1G_CAPAB_B1_RX_STBC BIT(2)
-#define S1G_CAPAB_B1_SU_BFER BIT(3)
-#define S1G_CAPAB_B1_SU_BFEE BIT(4)
-#define S1G_CAPAB_B1_BFEE_STS_MASK (BIT(5) | BIT(6) | BIT(7))
-#define S1G_CAPAB_B1_BFEE_STS_SHIFT 5
-
-#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_MASK (BIT(0) | BIT(1) | BIT(2))
-#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_SHIFT 0
-#define S1G_CAPAB_B2_MU_BFER BIT(3)
-#define S1G_CAPAB_B2_MU_BFEE BIT(4)
-#define S1G_CAPAB_B2_PLUS_HTC_VHT BIT(5)
-#define S1G_CAPAB_B2_TRAVELING_PILOT_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B2_TRAVELING_PILOT_SHIFT 6
-
-#define S1G_CAPAB_B3_RD_RESPONDER BIT(0)
-#define S1G_CAPAB_B3_HT_DELAYED_BA BIT(1)
-#define S1G_CAPAB_B3_MAX_MPDU_LEN BIT(2)
-#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_MASK (BIT(3) | BIT(4))
-#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_SHIFT 3
-#define S1G_CAPAB_B3_MIN_MPDU_START_MASK (BIT(5) | BIT(6) | BIT(7))
-#define S1G_CAPAB_B3_MIN_MPDU_START_SHIFT 5
-
-#define S1G_CAPAB_B4_UPLINK_SYNC BIT(0)
-#define S1G_CAPAB_B4_DYNAMIC_AID BIT(1)
-#define S1G_CAPAB_B4_BAT BIT(2)
-#define S1G_CAPAB_B4_TIME_ADE BIT(3)
-#define S1G_CAPAB_B4_NON_TIM BIT(4)
-#define S1G_CAPAB_B4_GROUP_AID BIT(5)
-#define S1G_CAPAB_B4_STA_TYPE_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B4_STA_TYPE_SHIFT 6
-
-#define S1G_CAPAB_B5_CENT_AUTH_CONTROL BIT(0)
-#define S1G_CAPAB_B5_DIST_AUTH_CONTROL BIT(1)
-#define S1G_CAPAB_B5_AMSDU BIT(2)
-#define S1G_CAPAB_B5_AMPDU BIT(3)
-#define S1G_CAPAB_B5_ASYMMETRIC_BA BIT(4)
-#define S1G_CAPAB_B5_FLOW_CONTROL BIT(5)
-#define S1G_CAPAB_B5_SECTORIZED_BEAM_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B5_SECTORIZED_BEAM_SHIFT 6
-
-#define S1G_CAPAB_B6_OBSS_MITIGATION BIT(0)
-#define S1G_CAPAB_B6_FRAGMENT_BA BIT(1)
-#define S1G_CAPAB_B6_NDP_PS_POLL BIT(2)
-#define S1G_CAPAB_B6_RAW_OPERATION BIT(3)
-#define S1G_CAPAB_B6_PAGE_SLICING BIT(4)
-#define S1G_CAPAB_B6_TXOP_SHARING_IMP_ACK BIT(5)
-#define S1G_CAPAB_B6_VHT_LINK_ADAPT_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B6_VHT_LINK_ADAPT_SHIFT 6
-
-#define S1G_CAPAB_B7_TACK_AS_PS_POLL BIT(0)
-#define S1G_CAPAB_B7_DUP_1MHZ BIT(1)
-#define S1G_CAPAB_B7_MCS_NEGOTIATION BIT(2)
-#define S1G_CAPAB_B7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
-#define S1G_CAPAB_B7_NDP_BFING_REPORT_POLL BIT(4)
-#define S1G_CAPAB_B7_UNSOLICITED_DYN_AID BIT(5)
-#define S1G_CAPAB_B7_SECTOR_TRAINING_OPERATION BIT(6)
-#define S1G_CAPAB_B7_TEMP_PS_MODE_SWITCH BIT(7)
-
-#define S1G_CAPAB_B8_TWT_GROUPING BIT(0)
-#define S1G_CAPAB_B8_BDT BIT(1)
-#define S1G_CAPAB_B8_COLOR_MASK (BIT(2) | BIT(3) | BIT(4))
-#define S1G_CAPAB_B8_COLOR_SHIFT 2
-#define S1G_CAPAB_B8_TWT_REQUEST BIT(5)
-#define S1G_CAPAB_B8_TWT_RESPOND BIT(6)
-#define S1G_CAPAB_B8_PV1_FRAME BIT(7)
-
-#define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+#define S1G_CAP0_S1G_LONG	BIT(0)
+#define S1G_CAP0_SGI_1MHZ	BIT(1)
+#define S1G_CAP0_SGI_2MHZ	BIT(2)
+#define S1G_CAP0_SGI_4MHZ	BIT(3)
+#define S1G_CAP0_SGI_8MHZ	BIT(4)
+#define S1G_CAP0_SGI_16MHZ	BIT(5)
+#define S1G_CAP0_SUPP_CH_WIDTH	GENMASK(7, 6)
+
+#define S1G_SUPP_CH_WIDTH_2	0
+#define S1G_SUPP_CH_WIDTH_4	1
+#define S1G_SUPP_CH_WIDTH_8	2
+#define S1G_SUPP_CH_WIDTH_16	3
+#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \
+						    cap[0])) << 1)
+
+#define S1G_CAP1_RX_LDPC	BIT(0)
+#define S1G_CAP1_TX_STBC	BIT(1)
+#define S1G_CAP1_RX_STBC	BIT(2)
+#define S1G_CAP1_SU_BFER	BIT(3)
+#define S1G_CAP1_SU_BFEE	BIT(4)
+#define S1G_CAP1_BFEE_STS	GENMASK(7, 5)
+
+#define S1G_CAP2_SOUNDING_DIMENSIONS	GENMASK(2, 0)
+#define S1G_CAP2_MU_BFER		BIT(3)
+#define S1G_CAP2_MU_BFEE		BIT(4)
+#define S1G_CAP2_PLUS_HTC_VHT		BIT(5)
+#define S1G_CAP2_TRAVELING_PILOT	GENMASK(7, 6)
+
+#define S1G_CAP3_RD_RESPONDER		BIT(0)
+#define S1G_CAP3_HT_DELAYED_BA		BIT(1)
+#define S1G_CAP3_MAX_MPDU_LEN		BIT(2)
+#define S1G_CAP3_MAX_AMPDU_LEN_EXP	GENMASK(4, 3)
+#define S1G_CAP3_MIN_MPDU_START		GENMASK(7, 5)
+
+#define S1G_CAP4_UPLINK_SYNC	BIT(0)
+#define S1G_CAP4_DYNAMIC_AID	BIT(1)
+#define S1G_CAP4_BAT		BIT(2)
+#define S1G_CAP4_TIME_ADE	BIT(3)
+#define S1G_CAP4_NON_TIM	BIT(4)
+#define S1G_CAP4_GROUP_AID	BIT(5)
+#define S1G_CAP4_STA_TYPE	GENMASK(7, 6)
+
+#define S1G_CAP5_CENT_AUTH_CONTROL	BIT(0)
+#define S1G_CAP5_DIST_AUTH_CONTROL	BIT(1)
+#define S1G_CAP5_AMSDU			BIT(2)
+#define S1G_CAP5_AMPDU			BIT(3)
+#define S1G_CAP5_ASYMMETRIC_BA		BIT(4)
+#define S1G_CAP5_FLOW_CONTROL		BIT(5)
+#define S1G_CAP5_SECTORIZED_BEAM	GENMASK(7, 6)
+
+#define S1G_CAP6_OBSS_MITIGATION	BIT(0)
+#define S1G_CAP6_FRAGMENT_BA		BIT(1)
+#define S1G_CAP6_NDP_PS_POLL		BIT(2)
+#define S1G_CAP6_RAW_OPERATION		BIT(3)
+#define S1G_CAP6_PAGE_SLICING		BIT(4)
+#define S1G_CAP6_TXOP_SHARING_IMP_ACK	BIT(5)
+#define S1G_CAP6_VHT_LINK_ADAPT		GENMASK(7, 6)
+
+#define S1G_CAP7_TACK_AS_PS_POLL		BIT(0)
+#define S1G_CAP7_DUP_1MHZ			BIT(1)
+#define S1G_CAP7_MCS_NEGOTIATION		BIT(2)
+#define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE	BIT(3)
+#define S1G_CAP7_NDP_BFING_REPORT_POLL		BIT(4)
+#define S1G_CAP7_UNSOLICITED_DYN_AID		BIT(5)
+#define S1G_CAP7_SECTOR_TRAINING_OPERATION	BIT(6)
+#define S1G_CAP7_TEMP_PS_MODE_SWITCH		BIT(7)
+
+#define S1G_CAP8_TWT_GROUPING	BIT(0)
+#define S1G_CAP8_BDT		BIT(1)
+#define S1G_CAP8_COLOR		GENMASK(4, 2)
+#define S1G_CAP8_TWT_REQUEST	BIT(5)
+#define S1G_CAP8_TWT_RESPOND	BIT(6)
+#define S1G_CAP8_PV1_FRAME	BIT(7)
+
+#define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+
+#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ	BIT(0)
+#define S1G_OPER_CH_WIDTH_OPER		GENMASK(4, 1)
 
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
-- 
2.20.1

[PATCH v2 02/22] nl80211: advertise supported channel width in S1G

[Thomas Pedersen]

S1G supports 5 channel widths: 1, 2, 4, 8, and 16. One
channel width is allowed per frequency in each operating
class, so it makes more sense to advertise the specific
channel width allowed.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/cfg80211.h       | 15 +++++++++++++++
 include/uapi/linux/nl80211.h | 15 +++++++++++++++
 net/wireless/nl80211.c       | 15 +++++++++++++++
 3 files changed, 45 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index c9bce9bba511..e4d4fbcb2edc 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -96,6 +96,16 @@ struct wiphy;
  * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted
  *	on this channel.
  * @IEEE80211_CHAN_NO_HE: HE operation is not permitted on this channel.
+ * @IEEE80211_CHAN_1MHZ: 1 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_2MHZ: 2 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_4MHZ: 4 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_8MHZ: 8 MHz bandwidth is permitted
+ *	on this channel.
+ * @IEEE80211_CHAN_16MHZ: 16 MHz bandwidth is permitted
+ *	on this channel.
  *
  */
 enum ieee80211_channel_flags {
@@ -113,6 +123,11 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_NO_20MHZ		= 1<<11,
 	IEEE80211_CHAN_NO_10MHZ		= 1<<12,
 	IEEE80211_CHAN_NO_HE		= 1<<13,
+	IEEE80211_CHAN_1MHZ		= 1<<14,
+	IEEE80211_CHAN_2MHZ		= 1<<15,
+	IEEE80211_CHAN_4MHZ		= 1<<16,
+	IEEE80211_CHAN_8MHZ		= 1<<17,
+	IEEE80211_CHAN_16MHZ		= 1<<18,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 0584e0d349f0..4e119c6afa31 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -3737,6 +3737,16 @@ enum nl80211_wmm_rule {
  * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
+ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
+ *	on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
+ *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3768,6 +3778,11 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_WMM,
 	NL80211_FREQUENCY_ATTR_NO_HE,
 	NL80211_FREQUENCY_ATTR_OFFSET,
+	NL80211_FREQUENCY_ATTR_1MHZ,
+	NL80211_FREQUENCY_ATTR_2MHZ,
+	NL80211_FREQUENCY_ATTR_4MHZ,
+	NL80211_FREQUENCY_ATTR_8MHZ,
+	NL80211_FREQUENCY_ATTR_16MHZ,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 52a35e788547..7da4d84bcc1a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1010,6 +1010,21 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct wiphy *wiphy,
 		if ((chan->flags & IEEE80211_CHAN_NO_HE) &&
 		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HE))
 			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_1MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_1MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_2MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_2MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_4MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_4MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_8MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_8MHZ))
+			goto nla_put_failure;
+		if ((chan->flags & IEEE80211_CHAN_16MHZ) &&
+		    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_16MHZ))
+			goto nla_put_failure;
 	}
 
 	if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
-- 
2.20.1

[PATCH v2 03/22] cfg80211: regulatory: handle S1G channels

[Thomas Pedersen]

S1G channels have a minimum bandwidth of 1Mhz, and there
is a 1:1 mapping of allowed bandwidth to channel number.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>

---

v2:
 - drop the freq_reg_info() interface changes and move the
   check for S1G band inside. Fixes a driver compile
   error.
 - fix iterating past bws[] in __freq_reg_info() by
   setting initial element to 0.
   Reported-by: kernel test robot <lkp@intel.com>
---
 net/wireless/reg.c | 70 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 58 insertions(+), 12 deletions(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 0ab7808fcec8..be6f54b70ad3 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1617,9 +1617,11 @@ __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
 {
 	const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy);
 	const struct ieee80211_reg_rule *reg_rule = NULL;
+	const u32 bws[] = {0, 1, 2, 4, 5, 8, 10, 16, 20};
+	int i = sizeof(bws) / sizeof(u32) - 1;
 	u32 bw;
 
-	for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
+	for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = MHZ_TO_KHZ(bws[i--])) {
 		reg_rule = freq_reg_info_regd(center_freq, regd, bw);
 		if (!IS_ERR(reg_rule))
 			return reg_rule;
@@ -1631,7 +1633,9 @@ __freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 min_bw)
 const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
 					       u32 center_freq)
 {
-	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20));
+	u32 min_bw = center_freq < MHZ_TO_KHZ(1000) ? 1 : 20;
+
+	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(min_bw));
 }
 EXPORT_SYMBOL(freq_reg_info);
 
@@ -1659,6 +1663,7 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 {
 	const struct ieee80211_freq_range *freq_range = NULL;
 	u32 max_bandwidth_khz, center_freq_khz, bw_flags = 0;
+	bool is_s1g = chan->band == NL80211_BAND_S1GHZ;
 
 	freq_range = &reg_rule->freq_range;
 
@@ -1678,16 +1683,57 @@ static uint32_t reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
 					MHZ_TO_KHZ(20)))
 		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
 
-	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
-		bw_flags |= IEEE80211_CHAN_NO_10MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
-		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
-		bw_flags |= IEEE80211_CHAN_NO_HT40;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
-		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
-	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
-		bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+	if (is_s1g) {
+		/* S1G is strict about non overlapping channels. We can
+		 * calculate which bandwidth is allowed per channel by finding
+		 * the largest bandwidth which cleanly divides the freq_range.
+		 */
+		int edge_offset;
+		int ch_bw = max_bandwidth_khz;
+
+		while (ch_bw) {
+			edge_offset = (center_freq_khz - ch_bw / 2) -
+				      freq_range->start_freq_khz;
+			if (edge_offset % ch_bw == 0) {
+				switch (KHZ_TO_MHZ(ch_bw)) {
+				case 1:
+					bw_flags |= IEEE80211_CHAN_1MHZ;
+					break;
+				case 2:
+					bw_flags |= IEEE80211_CHAN_2MHZ;
+					break;
+				case 4:
+					bw_flags |= IEEE80211_CHAN_4MHZ;
+					break;
+				case 8:
+					bw_flags |= IEEE80211_CHAN_8MHZ;
+					break;
+				case 16:
+					bw_flags |= IEEE80211_CHAN_16MHZ;
+					break;
+				default:
+					/* If we got here, no bandwidths fit on
+					 * this frequency, ie. band edge.
+					 */
+					bw_flags |= IEEE80211_CHAN_DISABLED;
+					break;
+				}
+				break;
+			}
+			ch_bw /= 2;
+		}
+	} else {
+		if (max_bandwidth_khz < MHZ_TO_KHZ(10))
+			bw_flags |= IEEE80211_CHAN_NO_10MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(20))
+			bw_flags |= IEEE80211_CHAN_NO_20MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(40))
+			bw_flags |= IEEE80211_CHAN_NO_HT40;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(80))
+			bw_flags |= IEEE80211_CHAN_NO_80MHZ;
+		if (max_bandwidth_khz < MHZ_TO_KHZ(160))
+			bw_flags |= IEEE80211_CHAN_NO_160MHZ;
+	}
 	return bw_flags;
 }
 
-- 
2.20.1

Re: [PATCH v2 03/22] cfg80211: regulatory: handle S1G channels

[Thomas Pedersen]

On 2020-08-31 13:55, Thomas Pedersen wrote:
> S1G channels have a minimum bandwidth of 1Mhz, and there
> is a 1:1 mapping of allowed bandwidth to channel number.
> 
> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
> 
> ---
> 
> v2:
>  - drop the freq_reg_info() interface changes and move the
>    check for S1G band inside. Fixes a driver compile
>    error.
>  - fix iterating past bws[] in __freq_reg_info() by
>    setting initial element to 0.
>    Reported-by: kernel test robot <lkp@intel.com>
> ---
>  net/wireless/reg.c | 70 ++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 58 insertions(+), 12 deletions(-)
> 
> diff --git a/net/wireless/reg.c b/net/wireless/reg.c
> index 0ab7808fcec8..be6f54b70ad3 100644
> --- a/net/wireless/reg.c
> +++ b/net/wireless/reg.c
> @@ -1617,9 +1617,11 @@ __freq_reg_info(struct wiphy *wiphy, u32
> center_freq, u32 min_bw)
>  {
>  	const struct ieee80211_regdomain *regd = reg_get_regdomain(wiphy);
>  	const struct ieee80211_reg_rule *reg_rule = NULL;
> +	const u32 bws[] = {0, 1, 2, 4, 5, 8, 10, 16, 20};
> +	int i = sizeof(bws) / sizeof(u32) - 1;

This could be 'int i = ARRAY_SIZE(bws) - 1'.

>  	u32 bw;
> 
> -	for (bw = MHZ_TO_KHZ(20); bw >= min_bw; bw = bw / 2) {
> +	for (bw = MHZ_TO_KHZ(bws[i]); bw >= min_bw; bw = 
> MHZ_TO_KHZ(bws[i--])) {
>  		reg_rule = freq_reg_info_regd(center_freq, regd, bw);
>  		if (!IS_ERR(reg_rule))
>  			return reg_rule;
> @@ -1631,7 +1633,9 @@ __freq_reg_info(struct wiphy *wiphy, u32
> center_freq, u32 min_bw)
>  const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
>  					       u32 center_freq)
>  {
> -	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(20));
> +	u32 min_bw = center_freq < MHZ_TO_KHZ(1000) ? 1 : 20;
> +
> +	return __freq_reg_info(wiphy, center_freq, MHZ_TO_KHZ(min_bw));
>  }
>  EXPORT_SYMBOL(freq_reg_info);
> 
> @@ -1659,6 +1663,7 @@ static uint32_t reg_rule_to_chan_bw_flags(const
> struct ieee80211_regdomain *regd
>  {
>  	const struct ieee80211_freq_range *freq_range = NULL;
>  	u32 max_bandwidth_khz, center_freq_khz, bw_flags = 0;
> +	bool is_s1g = chan->band == NL80211_BAND_S1GHZ;
> 
>  	freq_range = &reg_rule->freq_range;
> 
> @@ -1678,16 +1683,57 @@ static uint32_t
> reg_rule_to_chan_bw_flags(const struct ieee80211_regdomain *regd
>  					MHZ_TO_KHZ(20)))
>  		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
> 
> -	if (max_bandwidth_khz < MHZ_TO_KHZ(10))
> -		bw_flags |= IEEE80211_CHAN_NO_10MHZ;
> -	if (max_bandwidth_khz < MHZ_TO_KHZ(20))
> -		bw_flags |= IEEE80211_CHAN_NO_20MHZ;
> -	if (max_bandwidth_khz < MHZ_TO_KHZ(40))
> -		bw_flags |= IEEE80211_CHAN_NO_HT40;
> -	if (max_bandwidth_khz < MHZ_TO_KHZ(80))
> -		bw_flags |= IEEE80211_CHAN_NO_80MHZ;
> -	if (max_bandwidth_khz < MHZ_TO_KHZ(160))
> -		bw_flags |= IEEE80211_CHAN_NO_160MHZ;
> +	if (is_s1g) {
> +		/* S1G is strict about non overlapping channels. We can
> +		 * calculate which bandwidth is allowed per channel by finding
> +		 * the largest bandwidth which cleanly divides the freq_range.
> +		 */
> +		int edge_offset;
> +		int ch_bw = max_bandwidth_khz;
> +
> +		while (ch_bw) {
> +			edge_offset = (center_freq_khz - ch_bw / 2) -
> +				      freq_range->start_freq_khz;
> +			if (edge_offset % ch_bw == 0) {
> +				switch (KHZ_TO_MHZ(ch_bw)) {
> +				case 1:
> +					bw_flags |= IEEE80211_CHAN_1MHZ;
> +					break;
> +				case 2:
> +					bw_flags |= IEEE80211_CHAN_2MHZ;
> +					break;
> +				case 4:
> +					bw_flags |= IEEE80211_CHAN_4MHZ;
> +					break;
> +				case 8:
> +					bw_flags |= IEEE80211_CHAN_8MHZ;
> +					break;
> +				case 16:
> +					bw_flags |= IEEE80211_CHAN_16MHZ;
> +					break;
> +				default:
> +					/* If we got here, no bandwidths fit on
> +					 * this frequency, ie. band edge.
> +					 */
> +					bw_flags |= IEEE80211_CHAN_DISABLED;
> +					break;
> +				}
> +				break;
> +			}
> +			ch_bw /= 2;
> +		}
> +	} else {
> +		if (max_bandwidth_khz < MHZ_TO_KHZ(10))
> +			bw_flags |= IEEE80211_CHAN_NO_10MHZ;
> +		if (max_bandwidth_khz < MHZ_TO_KHZ(20))
> +			bw_flags |= IEEE80211_CHAN_NO_20MHZ;
> +		if (max_bandwidth_khz < MHZ_TO_KHZ(40))
> +			bw_flags |= IEEE80211_CHAN_NO_HT40;
> +		if (max_bandwidth_khz < MHZ_TO_KHZ(80))
> +			bw_flags |= IEEE80211_CHAN_NO_80MHZ;
> +		if (max_bandwidth_khz < MHZ_TO_KHZ(160))
> +			bw_flags |= IEEE80211_CHAN_NO_160MHZ;
> +	}
>  	return bw_flags;
>  }

-- 
thomas

[PATCH v2 04/22] nl80211: correctly validate S1G beacon head

[Thomas Pedersen]

The S1G beacon has a different header size than regular
beacons, so adjust the beacon head validator.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/wireless/nl80211.c | 16 +++++++++++++---
 net/wireless/util.c    |  5 +++++
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7da4d84bcc1a..3bf595c828db 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -209,14 +209,24 @@ static int validate_beacon_head(const struct nlattr *attr,
 	unsigned int len = nla_len(attr);
 	const struct element *elem;
 	const struct ieee80211_mgmt *mgmt = (void *)data;
-	unsigned int fixedlen = offsetof(struct ieee80211_mgmt,
-					 u.beacon.variable);
+	bool s1g_bcn = ieee80211_is_s1g_beacon(mgmt->frame_control);
+	unsigned int fixedlen, hdrlen;
+
+	if (s1g_bcn) {
+		fixedlen = offsetof(struct ieee80211_ext,
+				    u.s1g_beacon.variable);
+		hdrlen = offsetof(struct ieee80211_ext, u.s1g_beacon);
+	} else {
+		fixedlen = offsetof(struct ieee80211_mgmt,
+				    u.beacon.variable);
+		hdrlen = offsetof(struct ieee80211_mgmt, u.beacon);
+	}
 
 	if (len < fixedlen)
 		goto err;
 
 	if (ieee80211_hdrlen(mgmt->frame_control) !=
-	    offsetof(struct ieee80211_mgmt, u.beacon))
+	    hdrlen)
 		goto err;
 
 	data += fixedlen;
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 4a9ff9ef513f..49e7c0cbbf62 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -399,6 +399,11 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc)
 {
 	unsigned int hdrlen = 24;
 
+	if (ieee80211_is_ext(fc)) {
+		hdrlen = 4;
+		goto out;
+	}
+
 	if (ieee80211_is_data(fc)) {
 		if (ieee80211_has_a4(fc))
 			hdrlen = 30;
-- 
2.20.1

[PATCH v2 05/22] nl80211: support setting S1G channels

[Thomas Pedersen]

S1G channels have a single width defined per frequency, so
derive it from the channel flags with
ieee80211_s1g_channel_width().

Also support setting an S1G channel where control frequency may
differ from operating, and add some basic validation to
ensure the control channel is with the operating.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/cfg80211.h |  10 ++++
 net/wireless/chan.c    | 130 ++++++++++++++++++++++++-----------------
 net/wireless/util.c    |  27 +++++++++
 3 files changed, 115 insertions(+), 52 deletions(-)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e4d4fbcb2edc..d3d85bd9c0aa 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -5293,6 +5293,16 @@ ieee80211_channel_to_khz(const struct ieee80211_channel *chan)
 	return MHZ_TO_KHZ(chan->center_freq) + chan->freq_offset;
 }
 
+/**
+ * ieee80211_s1g_channel_width - get allowed channel width from @chan
+ *
+ * Only allowed for band NL80211_BAND_S1GHZ
+ * @chan: channel
+ * Return: The allowed channel width for this center_freq
+ */
+enum nl80211_chan_width
+ieee80211_s1g_channel_width(const struct ieee80211_channel *chan);
+
 /**
  * ieee80211_channel_to_freq_khz - convert channel number to frequency
  * @chan: channel number
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 6a6f2f214c10..96e24ee4c7e8 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -141,9 +141,62 @@ static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
 	return true;
 }
 
+static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width)
+{
+	int mhz;
+
+	switch (chan_width) {
+	case NL80211_CHAN_WIDTH_1:
+		mhz = 1;
+		break;
+	case NL80211_CHAN_WIDTH_2:
+		mhz = 2;
+		break;
+	case NL80211_CHAN_WIDTH_4:
+		mhz = 4;
+		break;
+	case NL80211_CHAN_WIDTH_8:
+		mhz = 8;
+		break;
+	case NL80211_CHAN_WIDTH_16:
+		mhz = 16;
+		break;
+	case NL80211_CHAN_WIDTH_5:
+		mhz = 5;
+		break;
+	case NL80211_CHAN_WIDTH_10:
+		mhz = 10;
+		break;
+	case NL80211_CHAN_WIDTH_20:
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		mhz = 20;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		mhz = 40;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+	case NL80211_CHAN_WIDTH_80:
+		mhz = 80;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		mhz = 160;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return -1;
+	}
+	return mhz;
+}
+
+static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
+{
+	return nl80211_chan_width_to_mhz(c->width);
+}
+
 bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 {
-	u32 control_freq;
+	u32 control_freq, oper_freq;
+	int oper_width, control_width;
 
 	if (!chandef->chan)
 		return false;
@@ -155,10 +208,6 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 
 	switch (chandef->width) {
 	case NL80211_CHAN_WIDTH_1:
-	case NL80211_CHAN_WIDTH_2:
-	case NL80211_CHAN_WIDTH_4:
-	case NL80211_CHAN_WIDTH_8:
-	case NL80211_CHAN_WIDTH_16:
 	case NL80211_CHAN_WIDTH_5:
 	case NL80211_CHAN_WIDTH_10:
 	case NL80211_CHAN_WIDTH_20:
@@ -169,6 +218,30 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 		if (chandef->center_freq2)
 			return false;
 		break;
+	case NL80211_CHAN_WIDTH_2:
+	case NL80211_CHAN_WIDTH_4:
+	case NL80211_CHAN_WIDTH_8:
+	case NL80211_CHAN_WIDTH_16:
+		control_freq = ieee80211_channel_to_khz(chandef->chan);
+		oper_freq = ieee80211_chandef_to_khz(chandef);
+		control_width = nl80211_chan_width_to_mhz(
+					ieee80211_s1g_channel_width(
+								chandef->chan));
+		oper_width = cfg80211_chandef_get_width(chandef);
+
+		if (oper_width < 0 || control_width < 0)
+			return false;
+		if (chandef->center_freq2)
+			return false;
+
+		if (control_freq + MHZ_TO_KHZ(control_width) / 2 >
+		    oper_freq + MHZ_TO_KHZ(oper_width) / 2)
+			return false;
+
+		if (control_freq - MHZ_TO_KHZ(control_width) / 2 <
+		    oper_freq - MHZ_TO_KHZ(oper_width) / 2)
+			return false;
+		break;
 	case NL80211_CHAN_WIDTH_40:
 		if (chandef->center_freq1 != control_freq + 10 &&
 		    chandef->center_freq1 != control_freq - 10)
@@ -264,53 +337,6 @@ static void chandef_primary_freqs(const struct cfg80211_chan_def *c,
 	}
 }
 
-static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
-{
-	int width;
-
-	switch (c->width) {
-	case NL80211_CHAN_WIDTH_1:
-		width = 1;
-		break;
-	case NL80211_CHAN_WIDTH_2:
-		width = 2;
-		break;
-	case NL80211_CHAN_WIDTH_4:
-		width = 4;
-		break;
-	case NL80211_CHAN_WIDTH_8:
-		width = 8;
-		break;
-	case NL80211_CHAN_WIDTH_16:
-		width = 16;
-		break;
-	case NL80211_CHAN_WIDTH_5:
-		width = 5;
-		break;
-	case NL80211_CHAN_WIDTH_10:
-		width = 10;
-		break;
-	case NL80211_CHAN_WIDTH_20:
-	case NL80211_CHAN_WIDTH_20_NOHT:
-		width = 20;
-		break;
-	case NL80211_CHAN_WIDTH_40:
-		width = 40;
-		break;
-	case NL80211_CHAN_WIDTH_80P80:
-	case NL80211_CHAN_WIDTH_80:
-		width = 80;
-		break;
-	case NL80211_CHAN_WIDTH_160:
-		width = 160;
-		break;
-	default:
-		WARN_ON_ONCE(1);
-		return -1;
-	}
-	return width;
-}
-
 const struct cfg80211_chan_def *
 cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
 			    const struct cfg80211_chan_def *c2)
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 49e7c0cbbf62..ac2bb1a80f2b 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -111,6 +111,33 @@ u32 ieee80211_channel_to_freq_khz(int chan, enum nl80211_band band)
 }
 EXPORT_SYMBOL(ieee80211_channel_to_freq_khz);
 
+enum nl80211_chan_width
+ieee80211_s1g_channel_width(const struct ieee80211_channel *chan)
+{
+	if (WARN_ON(!chan || chan->band != NL80211_BAND_S1GHZ))
+		return NL80211_CHAN_WIDTH_20_NOHT;
+
+	/*S1G defines a single allowed channel width per channel.
+	 * Extract that width here.
+	 */
+	if (chan->flags & IEEE80211_CHAN_1MHZ)
+		return NL80211_CHAN_WIDTH_1;
+	else if (chan->flags & IEEE80211_CHAN_2MHZ)
+		return NL80211_CHAN_WIDTH_2;
+	else if (chan->flags & IEEE80211_CHAN_4MHZ)
+		return NL80211_CHAN_WIDTH_4;
+	else if (chan->flags & IEEE80211_CHAN_8MHZ)
+		return NL80211_CHAN_WIDTH_8;
+	else if (chan->flags & IEEE80211_CHAN_16MHZ)
+		return NL80211_CHAN_WIDTH_16;
+
+	pr_err("unknown channel width for channel at %dKHz?\n",
+	       ieee80211_channel_to_khz(chan));
+
+	return NL80211_CHAN_WIDTH_1;
+}
+EXPORT_SYMBOL(ieee80211_s1g_channel_width);
+
 int ieee80211_freq_khz_to_channel(u32 freq)
 {
 	/* TODO: just handle MHz for now */
-- 
2.20.1

[PATCH v2 06/22] {cfg,mac}80211: get correct default channel width for S1G

[Thomas Pedersen]

Until now, the wifi default channels were assumed to be
NL80211_CHAN_NO_HT, or NL80211_CHAN_WIDTH_20_NOHT. S1G
devices however do not support these channel types/width.
When a default channel width is requested (during default
chandef init, or chanctx removal when not using channel
context), for S1G calculate the correct width. Fixes eg.
configuring strange (20Mhz) width during a scan on the S1G
band.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/chan.c |  9 ++++++++-
 net/wireless/chan.c | 10 ++++++++++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index bdc0f29dc6cd..8f48aff74c7b 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -536,7 +536,14 @@ static void ieee80211_del_chanctx(struct ieee80211_local *local,
 
 	if (!local->use_chanctx) {
 		struct cfg80211_chan_def *chandef = &local->_oper_chandef;
-		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+		/* S1G doesn't have 20MHz, so get the correct width for the
+		 * current channel.
+		 */
+		if (chandef->chan->band == NL80211_BAND_S1GHZ)
+			chandef->width =
+				ieee80211_s1g_channel_width(chandef->chan);
+		else
+			chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 		chandef->center_freq1 = chandef->chan->center_freq;
 		chandef->freq1_offset = chandef->chan->freq_offset;
 		chandef->center_freq2 = 0;
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 96e24ee4c7e8..a3bc50e419fd 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -33,6 +33,16 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
 	chandef->edmg.bw_config = 0;
 	chandef->edmg.channels = 0;
 
+	/* S1G allows a single width per channel, and since chan_type seems to
+	 * be for backwards compatibility only, ignore it and return the per
+	 * frequency width.
+	 */
+	if (chan->band == NL80211_BAND_S1GHZ) {
+		chandef->width = ieee80211_s1g_channel_width(chan);
+		chandef->center_freq1 = chan->center_freq;
+		return;
+	}
+
 	switch (chan_type) {
 	case NL80211_CHAN_NO_HT:
 		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
-- 
2.20.1

Re: [PATCH v2 06/22] {cfg,mac}80211: get correct default channel width for S1G

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> 
> +++ b/net/wireless/chan.c
> @@ -33,6 +33,16 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
>  	chandef->edmg.bw_config = 0;
>  	chandef->edmg.channels = 0;
>  
> +	/* S1G allows a single width per channel, and since chan_type seems to
> +	 * be for backwards compatibility only, ignore it and return the per
> +	 * frequency width.
> +	 */
> +	if (chan->band == NL80211_BAND_S1GHZ) {
> +		chandef->width = ieee80211_s1g_channel_width(chan);
> +		chandef->center_freq1 = chan->center_freq;
> +		return;
> +	}

Hmm. I'm not sure I want to let you get away with this?

It might be ... convenient, but it's also confusing to see something
like

	cfg80211_chandef_create(&out, some_channel, NL80211_CHAN_HT40PLUS);

actually create an S1G channel width?

Yes, this is mostly for backward compatibility, but it's also used in
few (21 in the stack) places. Many of those aren't relevant, e.g. in
net/mac80211/ibss.c it would obviously be clearer to handle the new
NL80211_CHAN_WIDTH_* values with e.g. a cfg80211_get_s1g_chandef()
function or so that does this derivation, instead of running into the

        default:
                /* fall back to 20 MHz for unsupported modes */
                cfg80211_chandef_create(&chandef, cbss->channel,
                                        NL80211_CHAN_NO_HT);

code.

IOW, it seems to me that this function should actually instead throw a
warning (and then perhaps configure something sane?), but not be the
default code path.

johannes

Re: [PATCH v2 06/22] {cfg,mac}80211: get correct default channel width for S1G

[Thomas Pedersen]

On 2020-09-18 03:38, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> 
>> +++ b/net/wireless/chan.c
>> @@ -33,6 +33,16 @@ void cfg80211_chandef_create(struct 
>> cfg80211_chan_def *chandef,
>>  	chandef->edmg.bw_config = 0;
>>  	chandef->edmg.channels = 0;
>> 
>> +	/* S1G allows a single width per channel, and since chan_type seems 
>> to
>> +	 * be for backwards compatibility only, ignore it and return the per
>> +	 * frequency width.
>> +	 */
>> +	if (chan->band == NL80211_BAND_S1GHZ) {
>> +		chandef->width = ieee80211_s1g_channel_width(chan);
>> +		chandef->center_freq1 = chan->center_freq;
>> +		return;
>> +	}
> 
> Hmm. I'm not sure I want to let you get away with this?
> 
> It might be ... convenient, but it's also confusing to see something
> like
> 
> 	cfg80211_chandef_create(&out, some_channel, NL80211_CHAN_HT40PLUS);
> 
> actually create an S1G channel width?

Yes I agree that looks like it should be an error.

> Yes, this is mostly for backward compatibility, but it's also used in
> few (21 in the stack) places. Many of those aren't relevant, e.g. in
> net/mac80211/ibss.c it would obviously be clearer to handle the new
> NL80211_CHAN_WIDTH_* values with e.g. a cfg80211_get_s1g_chandef()
> function or so that does this derivation, instead of running into the
> 
>         default:
>                 /* fall back to 20 MHz for unsupported modes */
>                 cfg80211_chandef_create(&chandef, cbss->channel,
>                                         NL80211_CHAN_NO_HT);

Yes, but then what would we pass to cfg80211_chandef_create()? We should
probably avoid adding an additional NL80211_CHAN_S1G if enum
nl80211_channel_type is legacy.

It seems like NL80211_CHAN_NO_HT is often used as "give me the default
channel width".  See cfg80211_get_chandef_type() when it throws up its 
hands
and returns NL80211_CHAN_NO_HT when encountering an unknown 
chandef->width.
Also IBSS passes NL80211_CHAN_NO_HT when the BSS is actually 5 or 10MHz.

Maybe (instead of adding a new nl80211_channel_type)
cfg80211_chandef_create() throws a warning if anything but 
NL80211_CHAN_NO_HT
is passed with an S1G frequency?

> IOW, it seems to me that this function should actually instead throw a
> warning (and then perhaps configure something sane?), but not be the
> default code path.

Yes, but I'd also like to avoid making the caller worry about the value 
of a
parameter which only exists for HT reasons (?).

-- 
thomas

Re: [PATCH v2 06/22] {cfg,mac}80211: get correct default channel width for S1G

[Johannes Berg]

On Sun, 2020-09-20 at 21:59 -0700, Thomas Pedersen wrote:
> 
> >         default:
> >                 /* fall back to 20 MHz for unsupported modes */
> >                 cfg80211_chandef_create(&chandef, cbss->channel,
> >                                         NL80211_CHAN_NO_HT);
> 
> Yes, but then what would we pass to cfg80211_chandef_create()? 

I'd say we just shouldn't call it if there's a chance that it's an S1G
channel?

> We should
> probably avoid adding an additional NL80211_CHAN_S1G if enum
> nl80211_channel_type is legacy.

Agree.

> It seems like NL80211_CHAN_NO_HT is often used as "give me the default
> channel width".  See cfg80211_get_chandef_type() when it throws up its 
> hands
> and returns NL80211_CHAN_NO_HT when encountering an unknown 
> chandef->width.
> Also IBSS passes NL80211_CHAN_NO_HT when the BSS is actually 5 or 10MHz.

Yeah, agree it's a bit of a mess, but I'm not really in favour of
keeping that mess :)

Also, that's a WARN_ON() there, so the NL80211_CHAN_NO_HT isn't meant to
be anything *valid* in that case, just a value that doesn't cause
crashes or other bad behaviour further down the road if we hit that
path.

> Maybe (instead of adding a new nl80211_channel_type)
> cfg80211_chandef_create() throws a warning if anything but 
> NL80211_CHAN_NO_HT
> is passed with an S1G frequency?

I'd literally just add

	cfg80211_chandef_create_s1g()

and just not have the argument at all? Or just fill the chandef
manually, but of course that's a bit tedious sometimes.

> > IOW, it seems to me that this function should actually instead throw a
> > warning (and then perhaps configure something sane?), but not be the
> > default code path.
> 
> Yes, but I'd also like to avoid making the caller worry about the value 
> of a parameter which only exists for HT reasons (?).

It mostly isn't even for HT reasons ... for HT, we could perfectly well
fill the chandef directly, and do in many cases.

johannes

Re: [PATCH v2 06/22] {cfg,mac}80211: get correct default channel width for S1G

[Thomas Pedersen]

On 2020-09-21 00:01, Johannes Berg wrote:
> On Sun, 2020-09-20 at 21:59 -0700, Thomas Pedersen wrote:
>> 
>> >         default:
>> >                 /* fall back to 20 MHz for unsupported modes */
>> >                 cfg80211_chandef_create(&chandef, cbss->channel,
>> >                                         NL80211_CHAN_NO_HT);
>> 
>> Yes, but then what would we pass to cfg80211_chandef_create()?
> 
> I'd say we just shouldn't call it if there's a chance that it's an S1G
> channel?
> 
>> We should
>> probably avoid adding an additional NL80211_CHAN_S1G if enum
>> nl80211_channel_type is legacy.
> 
> Agree.
> 
>> It seems like NL80211_CHAN_NO_HT is often used as "give me the default
>> channel width".  See cfg80211_get_chandef_type() when it throws up its
>> hands
>> and returns NL80211_CHAN_NO_HT when encountering an unknown
>> chandef->width.
>> Also IBSS passes NL80211_CHAN_NO_HT when the BSS is actually 5 or 
>> 10MHz.
> 
> Yeah, agree it's a bit of a mess, but I'm not really in favour of
> keeping that mess :)
> 
> Also, that's a WARN_ON() there, so the NL80211_CHAN_NO_HT isn't meant 
> to
> be anything *valid* in that case, just a value that doesn't cause
> crashes or other bad behaviour further down the road if we hit that
> path.
> 
>> Maybe (instead of adding a new nl80211_channel_type)
>> cfg80211_chandef_create() throws a warning if anything but
>> NL80211_CHAN_NO_HT
>> is passed with an S1G frequency?
> 
> I'd literally just add
> 
> 	cfg80211_chandef_create_s1g()
> 
> and just not have the argument at all? Or just fill the chandef
> manually, but of course that's a bit tedious sometimes.

Then the caller has to make the determination which function to call 
based on the chan->band, but we've told the function implicitly by 
passing chan. It doesn't make sense to me to push that complexity onto 
the caller.

That said, it actually looks like cfg80211_chandef_create() is only 
called when a chantype is passed to nl80211 (legacy), in DFS, or HT.

After removing this hunk the S1G tests still pass, so how about we just 
drop it :)

>> > IOW, it seems to me that this function should actually instead throw a
>> > warning (and then perhaps configure something sane?), but not be the
>> > default code path.
>> 
>> Yes, but I'd also like to avoid making the caller worry about the 
>> value
>> of a parameter which only exists for HT reasons (?).
> 
> It mostly isn't even for HT reasons ... for HT, we could perfectly well
> fill the chandef directly, and do in many cases.
> 
> johannes

-- 
thomas

[PATCH v2 07/22] mac80211: s1g: choose scanning width based on frequency

[Thomas Pedersen]

An S1G BSS can beacon at either 1 or 2 MHz and the channel
width is unique to a given frequency. Ignore scan channel
width for now and use the allowed channel width.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/scan.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5ac2785cdc7b..5002791fe165 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -905,6 +905,17 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 	local->scan_chandef.center_freq1 = chan->center_freq;
 	local->scan_chandef.freq1_offset = chan->freq_offset;
 	local->scan_chandef.center_freq2 = 0;
+
+	/* For scanning on the S1G band, ignore scan_width (which is constant
+	 * across all channels) for now since channel width is specific to each
+	 * channel. Detect the required channel width here and likely revisit
+	 * later. Maybe scan_width could be used to build the channel scan list?
+	 */
+	if (chan->band == NL80211_BAND_S1GHZ) {
+		local->scan_chandef.width = ieee80211_s1g_channel_width(chan);
+		goto  set_channel;
+	}
+
 	switch (scan_req->scan_width) {
 	case NL80211_BSS_CHAN_WIDTH_5:
 		local->scan_chandef.width = NL80211_CHAN_WIDTH_5;
@@ -925,8 +936,14 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
 		else
 			local->scan_chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
 		break;
+	case NL80211_BSS_CHAN_WIDTH_1:
+	case NL80211_BSS_CHAN_WIDTH_2:
+		/* shouldn't get here, S1G handled above */
+		WARN_ON(1);
+		break;
 	}
 
+set_channel:
 	if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
 		skip = 1;
 
-- 
2.20.1

Re: [PATCH v2 07/22] mac80211: s1g: choose scanning width based on frequency

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> An S1G BSS can beacon at either 1 or 2 MHz and the channel
> width is unique to a given frequency. Ignore scan channel
> width for now and use the allowed channel width.
> 
> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
> ---
>  net/mac80211/scan.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
> index 5ac2785cdc7b..5002791fe165 100644
> --- a/net/mac80211/scan.c
> +++ b/net/mac80211/scan.c
> @@ -905,6 +905,17 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
>  	local->scan_chandef.center_freq1 = chan->center_freq;
>  	local->scan_chandef.freq1_offset = chan->freq_offset;
>  	local->scan_chandef.center_freq2 = 0;
> +
> +	/* For scanning on the S1G band, ignore scan_width (which is constant
> +	 * across all channels) for now since channel width is specific to each
> +	 * channel. Detect the required channel width here and likely revisit
> +	 * later. Maybe scan_width could be used to build the channel scan list?
> +	 */
> +	if (chan->band == NL80211_BAND_S1GHZ) {
> +		local->scan_chandef.width = ieee80211_s1g_channel_width(chan);
> +		goto  set_channel;
> +	}

nit: double space after 'goto'

but really I came to say that this probably changes then, if you don't
convince me about the stuff in the previous patch review? :)

So I'm leaving this patch also for now - have applied 1-5 so far.

johannes

Re: [PATCH v2 07/22] mac80211: s1g: choose scanning width based on frequency

[Thomas Pedersen]

On 2020-09-18 03:40, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> An S1G BSS can beacon at either 1 or 2 MHz and the channel
>> width is unique to a given frequency. Ignore scan channel
>> width for now and use the allowed channel width.
>> 
>> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
>> ---
>>  net/mac80211/scan.c | 17 +++++++++++++++++
>>  1 file changed, 17 insertions(+)
>> 
>> diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
>> index 5ac2785cdc7b..5002791fe165 100644
>> --- a/net/mac80211/scan.c
>> +++ b/net/mac80211/scan.c
>> @@ -905,6 +905,17 @@ static void 
>> ieee80211_scan_state_set_channel(struct ieee80211_local *local,
>>  	local->scan_chandef.center_freq1 = chan->center_freq;
>>  	local->scan_chandef.freq1_offset = chan->freq_offset;
>>  	local->scan_chandef.center_freq2 = 0;
>> +
>> +	/* For scanning on the S1G band, ignore scan_width (which is 
>> constant
>> +	 * across all channels) for now since channel width is specific to 
>> each
>> +	 * channel. Detect the required channel width here and likely 
>> revisit
>> +	 * later. Maybe scan_width could be used to build the channel scan 
>> list?
>> +	 */
>> +	if (chan->band == NL80211_BAND_S1GHZ) {
>> +		local->scan_chandef.width = ieee80211_s1g_channel_width(chan);
>> +		goto  set_channel;
>> +	}
> 
> nit: double space after 'goto'
> 
> but really I came to say that this probably changes then, if you don't
> convince me about the stuff in the previous patch review? :)
> 
> So I'm leaving this patch also for now - have applied 1-5 so far.

Thanks. I'm not really sure what else would make sense here? 
scan_req->scan_width is constant across all channels in 
scan_req->channels so for S1G we can either filter the scan_req channels 
list based on scan_width (kind of strange and unexpected), or deduce the 
correct chanenl width for each channel in the list and ignore scan_width 
(mostly correct). It seems like scan_width is currently only used for 
scanning at 5 or 10MHz anyway?

-- 
thomas

Re: [PATCH v2 07/22] mac80211: s1g: choose scanning width based on frequency

[Johannes Berg]

On Sun, 2020-09-20 at 22:06 -0700, Thomas Pedersen wrote:
> 
> > > +	/* For scanning on the S1G band, ignore scan_width (which is 
> > > constant
> > > +	 * across all channels) for now since channel width is specific to 
> > > each
> > > +	 * channel. Detect the required channel width here and likely 
> > > revisit
> > > +	 * later. Maybe scan_width could be used to build the channel scan 
> > > list?
> > > +	 */
> > > +	if (chan->band == NL80211_BAND_S1GHZ) {
> > > +		local->scan_chandef.width = ieee80211_s1g_channel_width(chan);
> > > +		goto  set_channel;
> > > +	}
> > 
> > nit: double space after 'goto'
> > 
> > but really I came to say that this probably changes then, if you don't
> > convince me about the stuff in the previous patch review? :)
> > 
> > So I'm leaving this patch also for now - have applied 1-5 so far.
> 
> Thanks. I'm not really sure what else would make sense here? 
> scan_req->scan_width is constant across all channels in 
> scan_req->channels so for S1G we can either filter the scan_req channels 
> list based on scan_width (kind of strange and unexpected), or deduce the 
> correct chanenl width for each channel in the list and ignore scan_width 
> (mostly correct). It seems like scan_width is currently only used for 
> scanning at 5 or 10MHz anyway?

Yeah, that's true, it's sort of undefined if you're not in 5 or 10, and
then we currently assume it's 20, but obviously for S1G we should assume
then it's 1 MHz or something.

FWIW, here's probably where I thought you have a unique (freq, bw) tuple
and thus shouldn't really need to have the parsing in the other patch?
But I never looked at the spec so far ...


Anyway, wrt. the code here, I think perhaps you should just simply
remove the reference to scan_width? I'm not sure what you'd really do
with it, since it's a 5/10 MHz thing?

TBH though, offhand I don't even know how the 5/10 MHz scanning is
supposed to work?

johannes

[PATCH v2 08/22] nl80211: support S1G capabilities

[Thomas Pedersen]

Declare the structures needed to define S1G capabilities.

NL80211_ATTR_S1G_CAPABILITY can be passed along with
NL80211_ATTR_S1G_CAPABILITY_MASK to NL80211_CMD_ASSOCIATE
to indicate S1G capabilities which should override the
hardware capabilities in eg. the association request.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/cfg80211.h       |  3 +++
 include/uapi/linux/nl80211.h |  9 +++++++++
 net/wireless/nl80211.c       | 16 ++++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d3d85bd9c0aa..de04c7996b27 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2489,6 +2489,8 @@ enum cfg80211_assoc_req_flags {
  * @fils_nonces: FILS nonces (part of AAD) for protecting (Re)Association
  *	Request/Response frame or %NULL if FILS is not used. This field starts
  *	with 16 octets of STA Nonce followed by 16 octets of AP Nonce.
+ * @s1g_capa: S1G capability override
+ * @s1g_capa_mask: S1G capability override mask
  */
 struct cfg80211_assoc_request {
 	struct cfg80211_bss *bss;
@@ -2503,6 +2505,7 @@ struct cfg80211_assoc_request {
 	const u8 *fils_kek;
 	size_t fils_kek_len;
 	const u8 *fils_nonces;
+	struct ieee80211_s1g_cap s1g_capa, s1g_capa_mask;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 4e119c6afa31..70076492ebc9 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2513,6 +2513,12 @@ enum nl80211_commands {
  * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
  *	association request when used with NL80211_CMD_NEW_STATION).
  *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ *	override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ *	NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2995,6 +3001,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_HE_6GHZ_CAPABILITY,
 
+	NL80211_ATTR_S1G_CAPABILITY,
+	NL80211_ATTR_S1G_CAPABILITY_MASK,
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3046,6 +3054,7 @@ enum nl80211_attrs {
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
 #define NL80211_HT_CAPABILITY_LEN		26
 #define NL80211_VHT_CAPABILITY_LEN		12
+#define NL80211_S1G_CAPABILITY_LEN		15
 #define NL80211_HE_MIN_CAPABILITY_LEN           16
 #define NL80211_HE_MAX_CAPABILITY_LEN           54
 #define NL80211_MAX_NR_CIPHER_SUITES		5
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 3bf595c828db..578d99088719 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -685,6 +685,9 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_SCAN_FREQ_KHZ] = { .type = NLA_NESTED },
 	[NL80211_ATTR_HE_6GHZ_CAPABILITY] =
 		NLA_POLICY_EXACT_LEN(sizeof(struct ieee80211_he_6ghz_capa)),
+	[NL80211_ATTR_S1G_CAPABILITY] = { .len = NL80211_S1G_CAPABILITY_LEN },
+	[NL80211_ATTR_S1G_CAPABILITY_MASK] = {
+					.len = NL80211_S1G_CAPABILITY_LEN },
 };
 
 /* policy for the key attributes */
@@ -9698,6 +9701,19 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
 			nla_data(info->attrs[NL80211_ATTR_FILS_NONCES]);
 	}
 
+	if (info->attrs[NL80211_ATTR_S1G_CAPABILITY_MASK])
+		memcpy(&req.s1g_capa_mask,
+		       nla_data(info->attrs[NL80211_ATTR_S1G_CAPABILITY_MASK]),
+		       sizeof(req.s1g_capa_mask));
+
+	if (info->attrs[NL80211_ATTR_S1G_CAPABILITY]) {
+		if (!info->attrs[NL80211_ATTR_S1G_CAPABILITY_MASK])
+			return -EINVAL;
+		memcpy(&req.s1g_capa,
+		       nla_data(info->attrs[NL80211_ATTR_S1G_CAPABILITY]),
+		       sizeof(req.s1g_capa));
+	}
+
 	err = nl80211_crypto_settings(rdev, info, &req.crypto, 1);
 	if (!err) {
 		wdev_lock(dev->ieee80211_ptr);
-- 
2.20.1

Re: [PATCH v2 08/22] nl80211: support S1G capabilities

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> 
> +	NL80211_ATTR_S1G_CAPABILITY,
> +	NL80211_ATTR_S1G_CAPABILITY_MASK,
>  	/* add attributes here, update the policy in nl80211.c */

nit: keep a blank line?

>  	[NL80211_ATTR_HE_6GHZ_CAPABILITY] =
>  		NLA_POLICY_EXACT_LEN(sizeof(struct ieee80211_he_6ghz_capa)),
> +	[NL80211_ATTR_S1G_CAPABILITY] = { .len = NL80211_S1G_CAPABILITY_LEN },
> +	[NL80211_ATTR_S1G_CAPABILITY_MASK] = {
> +					.len = NL80211_S1G_CAPABILITY_LEN },

Please use the NLA_POLICY_EXACT_LEN() as in the line above, unless this
really was meant to be a *minimum* length, which I doubt?

johannes

Re: [PATCH v2 08/22] nl80211: support S1G capabilities

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> @@ -3046,6 +3054,7 @@ enum nl80211_attrs {
>  #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
>  #define NL80211_HT_CAPABILITY_LEN		26
>  #define NL80211_VHT_CAPABILITY_LEN		12
> +#define NL80211_S1G_CAPABILITY_LEN		15

Maybe that would make more sense in ieee80211.h? Renamed, of course?

johannes

Re: [PATCH v2 08/22] nl80211: support S1G capabilities

[Thomas Pedersen]

On 2020-09-18 03:47, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> @@ -3046,6 +3054,7 @@ enum nl80211_attrs {
>>  #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
>>  #define NL80211_HT_CAPABILITY_LEN		26
>>  #define NL80211_VHT_CAPABILITY_LEN		12
>> +#define NL80211_S1G_CAPABILITY_LEN		15
> 
> Maybe that would make more sense in ieee80211.h? Renamed, of course?

Makes sense, thanks I'll take care of that and the other comments in 
this
patch.

-- 
thomas

[PATCH v2 09/22] mac80211: support S1G STA capabilities

[Thomas Pedersen]

Include the S1G Capabilities element in an association
request, and support the cfg80211 capability overrides.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  4 ++++
 net/mac80211/mlme.c        |  8 +++++++
 net/mac80211/util.c        | 45 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 6bf879660a93..9363f43887b4 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -530,6 +530,8 @@ struct ieee80211_if_managed {
 	struct ieee80211_ht_cap ht_capa_mask; /* Valid parts of ht_capa */
 	struct ieee80211_vht_cap vht_capa; /* configured VHT overrides */
 	struct ieee80211_vht_cap vht_capa_mask; /* Valid parts of vht_capa */
+	struct ieee80211_s1g_cap s1g_capa; /* configured S1G overrides */
+	struct ieee80211_s1g_cap s1g_capa_mask; /* valid s1g_capa bits */
 
 	/* TDLS support */
 	u8 tdls_peer[ETH_ALEN] __aligned(2);
@@ -2193,6 +2195,8 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 				struct sk_buff *skb, bool need_basic,
 				enum nl80211_band band);
 u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo);
+u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
+			       struct ieee80211_sta_s1g_cap *caps, u8 *buf);
 
 /* channel management */
 bool ieee80211_chandef_ht_oper(const struct ieee80211_ht_operation *ht_oper,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ac870309b911..b69889563457 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1018,6 +1018,10 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
 	}
 
+	if (sband->band == NL80211_BAND_S1GHZ)
+		pos = ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap,
+						 skb_put(skb, 17));
+
 	/* add any remaining custom (i.e. vendor specific here) IEs */
 	if (assoc_data->ie_len) {
 		noffset = assoc_data->ie_len;
@@ -5461,6 +5465,10 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 	memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
 	       sizeof(ifmgd->vht_capa_mask));
 
+	memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa));
+	memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask,
+	       sizeof(ifmgd->s1g_capa_mask));
+
 	if (req->ie && req->ie_len) {
 		memcpy(assoc_data->ie, req->ie, req->ie_len);
 		assoc_data->ie_len = req->ie_len;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index c8504ffc71a1..27b2f1ceca69 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -4276,6 +4276,51 @@ int ieee80211_max_num_channels(struct ieee80211_local *local)
 	return max_num_different_channels;
 }
 
+u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
+			       struct ieee80211_sta_s1g_cap *own_cap, u8 *buf)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_s1g_cap s1g_capab;
+	u8 *pos = buf;
+	int i;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return pos;
+
+	if (!own_cap->s1g)
+		return pos;
+
+	memcpy(s1g_capab.capab_info, own_cap->cap, sizeof(own_cap->cap));
+	memcpy(s1g_capab.supp_mcs_nss, own_cap->nss_mcs,
+	       sizeof(own_cap->nss_mcs));
+
+	/* override the capability info */
+	for (i = 0; i < sizeof(ifmgd->s1g_capa.capab_info); i++) {
+		u8 mask = ifmgd->s1g_capa_mask.capab_info[i];
+
+		s1g_capab.capab_info[i] &= ~mask;
+		s1g_capab.capab_info[i] |= (ifmgd->s1g_capa.capab_info[i] &
+					    mask);
+	}
+
+	/* then MCS and NSS set */
+	for (i = 0; i < sizeof(ifmgd->s1g_capa.supp_mcs_nss); i++) {
+		u8 mask = ifmgd->s1g_capa_mask.supp_mcs_nss[i];
+
+		s1g_capab.supp_mcs_nss[i] &= ~mask;
+		s1g_capab.supp_mcs_nss[i] |= (ifmgd->s1g_capa.supp_mcs_nss[i] &
+					      mask);
+	}
+
+	*pos++ = WLAN_EID_S1G_CAPABILITIES;
+	*pos++ = sizeof(s1g_capab);
+
+	memcpy(pos, &s1g_capab, sizeof(s1g_capab));
+	pos += sizeof(s1g_capab);
+
+	return pos;
+}
+
 u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo)
 {
 	*buf++ = WLAN_EID_VENDOR_SPECIFIC;
-- 
2.20.1

[PATCH v2 10/22] cfg80211: convert S1G beacon to scan results

[Thomas Pedersen]

The S1G beacon is an extension frame as opposed to
management frame for the regular beacon. This means we may
have to occasionally cast the frame buffer to a different
header type. Luckily this isn't too bad as scan results
mostly only care about the IEs.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h | 32 ++++++++++++++++++++++
 net/wireless/scan.c       | 57 ++++++++++++++++++++++++++++++++-------
 2 files changed, 80 insertions(+), 9 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 53fba39d4ba6..bca4bb443291 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -151,6 +151,9 @@
 
 #define IEEE80211_ANO_NETTYPE_WILD              15
 
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT    0x100
+
 /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
 #define IEEE80211_CTL_EXT_POLL		0x2000
 #define IEEE80211_CTL_EXT_SPR		0x3000
@@ -553,6 +556,28 @@ static inline bool ieee80211_is_s1g_beacon(__le16 fc)
 	       cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON);
 }
 
+/**
+ * ieee80211_next_tbtt_present - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON && IEEE80211_S1G_BCN_NEXT_TBTT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_next_tbtt_present(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON) &&
+	       fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT);
+}
+
+/**
+ * ieee80211_is_s1g_short_beacon - check if next tbtt present bit is set. Only
+ * true for S1G beacons when they're short.
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_short_beacon(__le16 fc)
+{
+	return ieee80211_is_s1g_beacon(fc) && ieee80211_next_tbtt_present(fc);
+}
+
 /**
  * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
  * @fc: frame control bytes in little-endian byteorder
@@ -1034,6 +1059,13 @@ struct ieee80211_ext {
 			u8 change_seq;
 			u8 variable[0];
 		} __packed s1g_beacon;
+		struct {
+			u8 sa[ETH_ALEN];
+			__le32 timestamp;
+			u8 change_seq;
+			u8 next_tbtt[3];
+			u8 variable[0];
+		} __packed s1g_short_beacon;
 	} u;
 } __packed __aligned(2);
 
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 84fc8ab16dd2..b4c85e8f2107 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1807,8 +1807,11 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 	struct cfg80211_bss_ies *ies;
 	struct ieee80211_channel *channel;
 	bool signal_valid;
-	size_t ielen = len - offsetof(struct ieee80211_mgmt,
-				      u.probe_resp.variable);
+	struct ieee80211_ext *ext = NULL;
+	u8 *bssid, *variable;
+	u16 capability, beacon_int;
+	size_t ielen, min_hdr_len = offsetof(struct ieee80211_mgmt,
+					     u.probe_resp.variable);
 	int bss_type;
 
 	BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) !=
@@ -1826,21 +1829,57 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 		    (data->signal < 0 || data->signal > 100)))
 		return NULL;
 
-	if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable)))
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		ext = (void *) mgmt;
+		min_hdr_len = offsetof(struct ieee80211_ext, u.s1g_beacon);
+		if (ieee80211_is_s1g_short_beacon(mgmt->frame_control))
+			min_hdr_len = offsetof(struct ieee80211_ext,
+					       u.s1g_short_beacon.variable);
+	}
+
+	if (WARN_ON(len < min_hdr_len))
 		return NULL;
 
-	channel = cfg80211_get_bss_channel(wiphy, mgmt->u.beacon.variable,
+	ielen = len - min_hdr_len;
+	variable = mgmt->u.probe_resp.variable;
+	if (ext) {
+		if (ieee80211_is_s1g_short_beacon(mgmt->frame_control))
+			variable = ext->u.s1g_short_beacon.variable;
+		else
+			variable = ext->u.s1g_beacon.variable;
+	}
+
+	channel = cfg80211_get_bss_channel(wiphy, variable,
 					   ielen, data->chan, data->scan_width);
 	if (!channel)
 		return NULL;
 
+	if (ext) {
+		struct ieee80211_s1g_bcn_compat_ie *compat;
+		u8 *ie;
+
+		ie = (void *)cfg80211_find_ie(WLAN_EID_S1G_BCN_COMPAT,
+					      variable, ielen);
+		if (!ie)
+			return NULL;
+		compat = (void *)(ie + 2);
+		bssid = ext->u.s1g_beacon.sa;
+		capability = le16_to_cpu(compat->compat_info);
+		beacon_int = le16_to_cpu(compat->beacon_int);
+	} else {
+		bssid = mgmt->bssid;
+		beacon_int = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
+		capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
+	}
+
 	ies = kzalloc(sizeof(*ies) + ielen, gfp);
 	if (!ies)
 		return NULL;
 	ies->len = ielen;
 	ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
-	ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control);
-	memcpy(ies->data, mgmt->u.probe_resp.variable, ielen);
+	ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control) ||
+			   ieee80211_is_s1g_beacon(mgmt->frame_control);
+	memcpy(ies->data, variable, ielen);
 
 	if (ieee80211_is_probe_resp(mgmt->frame_control))
 		rcu_assign_pointer(tmp.pub.proberesp_ies, ies);
@@ -1848,12 +1887,12 @@ cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
 		rcu_assign_pointer(tmp.pub.beacon_ies, ies);
 	rcu_assign_pointer(tmp.pub.ies, ies);
 
-	memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN);
+	memcpy(tmp.pub.bssid, bssid, ETH_ALEN);
+	tmp.pub.beacon_interval = beacon_int;
+	tmp.pub.capability = capability;
 	tmp.pub.channel = channel;
 	tmp.pub.scan_width = data->scan_width;
 	tmp.pub.signal = data->signal;
-	tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
-	tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
 	tmp.ts_boottime = data->boottime_ns;
 	tmp.parent_tsf = data->parent_tsf;
 	tmp.pub.chains = data->chains;
-- 
2.20.1

[PATCH v2 11/22] cfg80211: parse S1G Operation element for BSS channel

[Thomas Pedersen]

Extract the BSS primary channel from the S1G Operation
element.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/wireless/scan.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index b4c85e8f2107..c2dcb9092257 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1318,15 +1318,26 @@ cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen,
 	tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen);
 	if (tmp && tmp[1] == 1) {
 		channel_number = tmp[2];
-	} else {
-		tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
-		if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
-			struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
+		goto found_channel;
+	}
 
-			channel_number = htop->primary_chan;
-		}
+	tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
+	if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
+		struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
+
+		channel_number = htop->primary_chan;
+		goto found_channel;
+	}
+
+	tmp = cfg80211_find_ie(WLAN_EID_S1G_OPERATION, ie, ielen);
+	if (tmp && tmp[1] >= sizeof(struct ieee80211_s1g_oper_ie)) {
+		struct ieee80211_s1g_oper_ie *s1gop = (void *)(tmp + 2);
+
+		channel_number = s1gop->primary_ch;
+		goto found_channel;
 	}
 
+found_channel:
 	if (channel_number < 0) {
 		/* No channel information in frame payload */
 		return channel;
-- 
2.20.1

Re: [PATCH v2 11/22] cfg80211: parse S1G Operation element for BSS channel

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> Extract the BSS primary channel from the S1G Operation
> element.

Out of curiosity, do you even need to?

I mean ... you know what channel you received it on, surely?

> @@ -1318,15 +1318,26 @@ cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen,
>  	tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen);
>  	if (tmp && tmp[1] == 1) {
>  		channel_number = tmp[2];
> -	} else {
> -		tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
> -		if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
> -			struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
> +		goto found_channel;
> +	}
>  
> -			channel_number = htop->primary_chan;
> -		}
> +	tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
> +	if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
> +		struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
> +
> +		channel_number = htop->primary_chan;
> +		goto found_channel;
> +	}
> +
> +	tmp = cfg80211_find_ie(WLAN_EID_S1G_OPERATION, ie, ielen);
> +	if (tmp && tmp[1] >= sizeof(struct ieee80211_s1g_oper_ie)) {
> +		struct ieee80211_s1g_oper_ie *s1gop = (void *)(tmp + 2);
> +
> +		channel_number = s1gop->primary_ch;
> +		goto found_channel;
>  	}

I *am* a bit worried about this though - do you really want to try to
parse DS elements on S1G, or S1G elements on other bands? Seems like
there ought to be a band check here?

johannes

Re: [PATCH v2 11/22] cfg80211: parse S1G Operation element for BSS channel

[Thomas Pedersen]

On 2020-09-18 03:45, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> Extract the BSS primary channel from the S1G Operation
>> element.
> 
> Out of curiosity, do you even need to?
> 
> I mean ... you know what channel you received it on, surely?

Consider the case where the BSS is operating @ 2Mhz, but primary is one 
of
the 1Mhz channels. The hardware (or driver) may not be able to tell you
exactly which primary channel (upper or lower) the packet came in on.

>> @@ -1318,15 +1318,26 @@ cfg80211_get_bss_channel(struct wiphy *wiphy, 
>> const u8 *ie, size_t ielen,
>>  	tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen);
>>  	if (tmp && tmp[1] == 1) {
>>  		channel_number = tmp[2];
>> -	} else {
>> -		tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
>> -		if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
>> -			struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
>> +		goto found_channel;
>> +	}
>> 
>> -			channel_number = htop->primary_chan;
>> -		}
>> +	tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
>> +	if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
>> +		struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
>> +
>> +		channel_number = htop->primary_chan;
>> +		goto found_channel;
>> +	}
>> +
>> +	tmp = cfg80211_find_ie(WLAN_EID_S1G_OPERATION, ie, ielen);
>> +	if (tmp && tmp[1] >= sizeof(struct ieee80211_s1g_oper_ie)) {
>> +		struct ieee80211_s1g_oper_ie *s1gop = (void *)(tmp + 2);
>> +
>> +		channel_number = s1gop->primary_ch;
>> +		goto found_channel;
>>  	}
> 
> I *am* a bit worried about this though - do you really want to try to
> parse DS elements on S1G, or S1G elements on other bands? Seems like
> there ought to be a band check here?

OK. I'll rework this to handle garbage input a little better.

-- 
thomas

Re: [PATCH v2 11/22] cfg80211: parse S1G Operation element for BSS channel

[Johannes Berg]

On Sun, 2020-09-20 at 22:12 -0700, Thomas Pedersen wrote:
> On 2020-09-18 03:45, Johannes Berg wrote:
> > On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> > > Extract the BSS primary channel from the S1G Operation
> > > element.
> > 
> > Out of curiosity, do you even need to?
> > 
> > I mean ... you know what channel you received it on, surely?
> 
> Consider the case where the BSS is operating @ 2Mhz, but primary is one 
> of
> the 1Mhz channels. The hardware (or driver) may not be able to tell you
> exactly which primary channel (upper or lower) the packet came in on.

Ah, OK, makes sense. Somehow based on a comment somewhere else I thought
you were saying that the channels are basically all unique in their
(center frequency, bandwidth) tuple, and was assuming you'd actually
have to scan them that way.

johannes

[PATCH v2 12/22] mac80211: convert S1G beacon to scan results

[Thomas Pedersen]

This commit finds the correct offset for Information
Elements in S1G beacon frames so they can be reported in
scan results, and track whether a given BSS is S1G.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  7 +++++++
 net/mac80211/rx.c          |  3 ++-
 net/mac80211/scan.c        | 20 ++++++++++++++++----
 net/mac80211/util.c        | 28 ++++++++++++++++++++++++++++
 4 files changed, 53 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 9363f43887b4..8bbdc27d57c6 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -127,6 +127,9 @@ struct ieee80211_bss {
 
 	/* Keep track of what bits of information we have valid info for. */
 	u8 valid_data;
+
+	/* BSS info was transmitted by an S1G STA */
+	u8 s1g;
 };
 
 /**
@@ -1524,6 +1527,10 @@ struct ieee802_11_elems {
 	u8 dtim_count;
 	u8 dtim_period;
 	const struct ieee80211_addba_ext_ie *addba_ext_ie;
+	const struct ieee80211_s1g_cap *s1g_capab;
+	const struct ieee80211_s1g_oper_ie *s1g_oper;
+	const u8 *s1g_tsbtt;
+	const struct ieee80211_s1g_bcn_compat_ie *s1g_bcn_compat;
 
 	/* length of them, respectively */
 	u8 ext_capab_len;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 836cde516a18..5b92f56682e2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -4586,7 +4586,8 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 	ieee80211_verify_alignment(&rx);
 
 	if (unlikely(ieee80211_is_probe_resp(hdr->frame_control) ||
-		     ieee80211_is_beacon(hdr->frame_control)))
+		     ieee80211_is_beacon(hdr->frame_control) ||
+		     ieee80211_is_s1g_beacon(hdr->frame_control)))
 		ieee80211_scan_rx(local, skb);
 
 	if (ieee80211_is_data(fc)) {
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 5002791fe165..3dd65b7c839b 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -124,6 +124,9 @@ ieee80211_update_bss_from_elems(struct ieee80211_local *local,
 			bss->valid_data |= IEEE80211_BSS_VALID_WMM;
 	}
 
+	if (!elems->parse_error && elems->s1g_capab)
+		bss->s1g = true;
+
 	if (beacon) {
 		struct ieee80211_supported_band *sband =
 			local->hw.wiphy->bands[rx_status->band];
@@ -146,7 +149,8 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 			  struct ieee80211_mgmt *mgmt, size_t len,
 			  struct ieee80211_channel *channel)
 {
-	bool beacon = ieee80211_is_beacon(mgmt->frame_control);
+	bool beacon = ieee80211_is_beacon(mgmt->frame_control) ||
+		      ieee80211_is_s1g_beacon(mgmt->frame_control);
 	struct cfg80211_bss *cbss, *non_tx_cbss;
 	struct ieee80211_bss *bss, *non_tx_bss;
 	struct cfg80211_inform_bss bss_meta = {
@@ -195,6 +199,11 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
 		elements = mgmt->u.probe_resp.variable;
 		baselen = offsetof(struct ieee80211_mgmt,
 				   u.probe_resp.variable);
+	} else if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		baselen = offsetof(struct ieee80211_ext, u.s1g_beacon.variable);
+		elements = ext->u.s1g_beacon.variable;
 	} else {
 		baselen = offsetof(struct ieee80211_mgmt, u.beacon.variable);
 		elements = mgmt->u.beacon.variable;
@@ -246,9 +255,12 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
 	struct ieee80211_bss *bss;
 	struct ieee80211_channel *channel;
 
-	if (skb->len < 24 ||
-	    (!ieee80211_is_probe_resp(mgmt->frame_control) &&
-	     !ieee80211_is_beacon(mgmt->frame_control)))
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		if (skb->len < 15)
+			return;
+	} else if (skb->len < 24 ||
+		 (!ieee80211_is_probe_resp(mgmt->frame_control) &&
+		  !ieee80211_is_beacon(mgmt->frame_control)))
 		return;
 
 	sdata1 = rcu_dereference(local->scan_sdata);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 27b2f1ceca69..e474b2bf227b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1003,6 +1003,10 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 		case WLAN_EID_LINK_ID:
 		case WLAN_EID_BSS_MAX_IDLE_PERIOD:
 		case WLAN_EID_RSNX:
+		case WLAN_EID_S1G_BCN_COMPAT:
+		case WLAN_EID_S1G_CAPABILITIES:
+		case WLAN_EID_S1G_OPERATION:
+		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
 		/*
 		 * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible
 		 * that if the content gets bigger it might be needed more than once
@@ -1288,6 +1292,30 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 								&crc : NULL,
 							  elem, elems);
 			break;
+		case WLAN_EID_S1G_CAPABILITIES:
+			if (elen == 15)
+				elems->s1g_capab = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_OPERATION:
+			if (elen == 6)
+				elems->s1g_oper = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
+			if (elen == 2)
+				elems->s1g_tsbtt = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
+		case WLAN_EID_S1G_BCN_COMPAT:
+			if (elen == sizeof(struct ieee80211_s1g_bcn_compat_ie))
+				elems->s1g_bcn_compat = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
 		default:
 			break;
 		}
-- 
2.20.1

Re: [PATCH v2 12/22] mac80211: convert S1G beacon to scan results

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:

>  
> +	if (!elems->parse_error && elems->s1g_capab)
> +		bss->s1g = true;

It seems odd to set this only if it's in error - why not always set it
if the band is right?

In fact, why set it at all, since you always know the band?

> +		case WLAN_EID_S1G_CAPABILITIES:
> +			if (elen == 15)
> +				elems->s1g_capab = (void *)pos;
> +			else
> +				elem_parse_failed = true;
> +			break;
> +		case WLAN_EID_S1G_OPERATION:
> +			if (elen == 6)
> +				elems->s1g_oper = (void *)pos;
> +			else
> +				elem_parse_failed = true;
> +			break;
> +		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
> +			if (elen == 2)
> +				elems->s1g_tsbtt = (void *)pos;
> +			else
> +				elem_parse_failed = true;
> +			break;

Seems like you ought to have some structs/sizeof or defines for the
sizes?

johannes

Re: [PATCH v2 12/22] mac80211: convert S1G beacon to scan results

[Thomas Pedersen]

On 2020-09-18 03:48, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> 
>> 
>> +	if (!elems->parse_error && elems->s1g_capab)
>> +		bss->s1g = true;
> 
> It seems odd to set this only if it's in error - why not always set it
> if the band is right?

True.

> In fact, why set it at all, since you always know the band?

It seemed like a convenient shorthand, but looking at 
net/mac80211/mlme.c the
band/channel is available (sband->band or cbss->channel->band) wherever 
we
check s1g->bss so maybe it's not needed. I'll remove it to keep things
simple.

>> +		case WLAN_EID_S1G_CAPABILITIES:
>> +			if (elen == 15)
>> +				elems->s1g_capab = (void *)pos;
>> +			else
>> +				elem_parse_failed = true;
>> +			break;
>> +		case WLAN_EID_S1G_OPERATION:
>> +			if (elen == 6)
>> +				elems->s1g_oper = (void *)pos;
>> +			else
>> +				elem_parse_failed = true;
>> +			break;
>> +		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
>> +			if (elen == 2)
>> +				elems->s1g_tsbtt = (void *)pos;
>> +			else
>> +				elem_parse_failed = true;
>> +			break;
> 
> Seems like you ought to have some structs/sizeof or defines for the
> sizes?

Yes I'll find something. Thanks.

-- 
thomas

[PATCH v2 13/22] cfg80211: handle Association Response from S1G STA

[Thomas Pedersen]

The sending STA type is implicit based on beacon or probe
response content. If sending STA was an S1G STA, adjust
the Information Element location accordingly.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h |  5 +++++
 net/wireless/mlme.c       | 20 ++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index bca4bb443291..690d00505649 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1100,6 +1100,11 @@ struct ieee80211_mgmt {
 			/* followed by Supported rates */
 			u8 variable[0];
 		} __packed assoc_resp, reassoc_resp;
+		struct {
+			__le16 capab_info;
+			__le16 status_code;
+			u8 variable[0];
+		} __packed s1g_assoc_resp, s1g_reassoc_resp;
 		struct {
 			__le16 capab_info;
 			__le16 listen_interval;
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index db7333e20dd7..f8655452b81a 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -30,6 +30,8 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss,
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
 	struct cfg80211_connect_resp_params cr;
+	const struct cfg80211_bss_ies *ies;
+	const u8 *s1g;
 
 	memset(&cr, 0, sizeof(cr));
 	cr.status = (int)le16_to_cpu(mgmt->u.assoc_resp.status_code);
@@ -42,6 +44,24 @@ void cfg80211_rx_assoc_resp(struct net_device *dev, struct cfg80211_bss *bss,
 		len - offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
 	cr.timeout_reason = NL80211_TIMEOUT_UNSPECIFIED;
 
+	/* Detect whether this was an S1G Association Response and adjust IE
+	 * location accordingly.
+	 */
+	rcu_read_lock();
+	ies = rcu_dereference(bss->ies);
+	if (WARN_ON(!ies)) {
+		rcu_read_unlock();
+		return;
+	}
+	s1g = cfg80211_find_ie(WLAN_EID_S1G_CAPABILITIES, ies->data, ies->len);
+	if (s1g) {
+		cr.resp_ie = (u8 *)&mgmt->u.s1g_assoc_resp.variable;
+		cr.resp_ie_len =
+			len - offsetof(struct ieee80211_mgmt,
+				       u.s1g_assoc_resp.variable);
+	}
+	rcu_read_unlock();
+
 	trace_cfg80211_send_rx_assoc(dev, bss);
 
 	/*
-- 
2.20.1

Re: [PATCH v2 13/22] cfg80211: handle Association Response from S1G STA

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> 
> +	/* Detect whether this was an S1G Association Response and adjust IE
> +	 * location accordingly.
> +	 */
> +	rcu_read_lock();
> +	ies = rcu_dereference(bss->ies);
> +	if (WARN_ON(!ies)) {
> +		rcu_read_unlock();
> +		return;
> +	}
> +	s1g = cfg80211_find_ie(WLAN_EID_S1G_CAPABILITIES, ies->data, ies->len);
> +	if (s1g) {
> +		cr.resp_ie = (u8 *)&mgmt->u.s1g_assoc_resp.variable;
> +		cr.resp_ie_len =
> +			len - offsetof(struct ieee80211_mgmt,
> +				       u.s1g_assoc_resp.variable);
> +	}
> +	rcu_read_unlock();

That ... is rather strange?

Why not check bss->channel->band?

johannes

Re: [PATCH v2 13/22] cfg80211: handle Association Response from S1G STA

[Thomas Pedersen]

On 2020-09-18 03:50, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> 
>> +	/* Detect whether this was an S1G Association Response and adjust IE
>> +	 * location accordingly.
>> +	 */
>> +	rcu_read_lock();
>> +	ies = rcu_dereference(bss->ies);
>> +	if (WARN_ON(!ies)) {
>> +		rcu_read_unlock();
>> +		return;
>> +	}
>> +	s1g = cfg80211_find_ie(WLAN_EID_S1G_CAPABILITIES, ies->data, 
>> ies->len);
>> +	if (s1g) {
>> +		cr.resp_ie = (u8 *)&mgmt->u.s1g_assoc_resp.variable;
>> +		cr.resp_ie_len =
>> +			len - offsetof(struct ieee80211_mgmt,
>> +				       u.s1g_assoc_resp.variable);
>> +	}
>> +	rcu_read_unlock();
> 
> That ... is rather strange?
> 
> Why not check bss->channel->band?

Thanks! That saves a lot of work :)

-- 
thomas

[PATCH v2 14/22] mac80211: encode listen interval for S1G

[Thomas Pedersen]

S1G allows listen interval up to 2^14 * 10000 beacon
intervals. In order to do this listen interval needs a
scaling factor applied to the lower 14 bits. Calculate
this and properly encode the listen interval for S1G STAs.

See IEEE802.11ah-2016 Table 9-44a for reference.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h  |  9 +++++++++
 net/mac80211/ieee80211_i.h |  1 +
 net/mac80211/mlme.c        | 11 +++++++----
 net/mac80211/util.c        | 20 ++++++++++++++++++++
 4 files changed, 37 insertions(+), 4 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 690d00505649..a63ad4b4f973 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2446,6 +2446,15 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 #define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ	BIT(0)
 #define S1G_OPER_CH_WIDTH_OPER		GENMASK(4, 1)
 
+
+#define LISTEN_INT_USF	GENMASK(15, 14)
+#define LISTEN_INT_UI	GENMASK(13, 0)
+
+#define IEEE80211_MAX_USF	FIELD_MAX(LISTEN_INT_USF)
+#define IEEE80211_MAX_UI	FIELD_MAX(LISTEN_INT_UI)
+
+static const int listen_int_usf[] = { 1, 10, 1000, 10000 };
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 8bbdc27d57c6..cf78e356b25d 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -2293,6 +2293,7 @@ void ieee80211_tdls_chsw_work(struct work_struct *wk);
 void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
 				      const u8 *peer, u16 reason);
 const char *ieee80211_get_reason_code_string(u16 reason_code);
+__le16 ieee80211_encode_usf(int val);
 
 extern const struct ethtool_ops ieee80211_ethtool_ops;
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index b69889563457..6a62a221b89e 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -686,6 +686,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
+	struct ieee80211_bss *bss = (void *)assoc_data->bss->priv;
 	struct sk_buff *skb;
 	struct ieee80211_mgmt *mgmt;
 	u8 *pos, qos_info, *ie_start;
@@ -696,6 +697,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_chanctx_conf *chanctx_conf;
 	struct ieee80211_channel *chan;
 	u32 rates = 0;
+	__le16 listen_int;
 	struct element *ext_capa = NULL;
 
 	/* we know it's writable, cast away the const */
@@ -784,13 +786,15 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
 	memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
 
+	listen_int = cpu_to_le16(bss->s1g ?
+			ieee80211_encode_usf(local->hw.conf.listen_interval) :
+			local->hw.conf.listen_interval);
 	if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
 		skb_put(skb, 10);
 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						  IEEE80211_STYPE_REASSOC_REQ);
 		mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.reassoc_req.listen_interval =
-				cpu_to_le16(local->hw.conf.listen_interval);
+		mgmt->u.reassoc_req.listen_interval = listen_int;
 		memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
 		       ETH_ALEN);
 	} else {
@@ -798,8 +802,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
 						  IEEE80211_STYPE_ASSOC_REQ);
 		mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
-		mgmt->u.assoc_req.listen_interval =
-				cpu_to_le16(local->hw.conf.listen_interval);
+		mgmt->u.assoc_req.listen_interval = listen_int;
 	}
 
 	/* SSID */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index e474b2bf227b..57c6f8bd2bdf 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -4391,3 +4391,23 @@ const u8 ieee80211_ac_to_qos_mask[IEEE80211_NUM_ACS] = {
 	IEEE80211_WMM_IE_STA_QOSINFO_AC_BE,
 	IEEE80211_WMM_IE_STA_QOSINFO_AC_BK
 };
+
+__le16 ieee80211_encode_usf(int listen_interval)
+{
+	u16 ui, usf = 0;
+
+	/* find greatest USF */
+	while (usf < IEEE80211_MAX_USF) {
+		if (listen_interval % listen_int_usf[usf + 1])
+			break;
+		usf += 1;
+	}
+	ui = listen_interval / listen_int_usf[usf];
+
+	/* error if there is a remainder. Should've been checked by user */
+	WARN_ON_ONCE(ui > IEEE80211_MAX_UI);
+	listen_interval = FIELD_PREP(LISTEN_INT_USF, usf) |
+			  FIELD_PREP(LISTEN_INT_UI, ui);
+
+	return listen_interval;
+}
-- 
2.20.1

Re: [PATCH v2 14/22] mac80211: encode listen interval for S1G

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:

> +static const int listen_int_usf[] = { 1, 10, 1000, 10000 };

That should probably be in some C file?

OTOH ... maybe it's small enough to duplicate everywhere? could make it
u16 at least :)

> +__le16 ieee80211_encode_usf(int listen_interval)
> +{
> +	u16 ui, usf = 0;
> +
> +	/* find greatest USF */
> +	while (usf < IEEE80211_MAX_USF) {
> +		if (listen_interval % listen_int_usf[usf + 1])
> +			break;
> +		usf += 1;
> +	}
> +	ui = listen_interval / listen_int_usf[usf];

But you really only need it here in one place anyway.

johannes

Re: [PATCH v2 14/22] mac80211: encode listen interval for S1G

[Thomas Pedersen]

On 2020-09-18 03:51, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> 
>> +static const int listen_int_usf[] = { 1, 10, 1000, 10000 };
> 
> That should probably be in some C file?
> 
> OTOH ... maybe it's small enough to duplicate everywhere? could make it
> u16 at least :)
> 
>> +__le16 ieee80211_encode_usf(int listen_interval)
>> +{
>> +	u16 ui, usf = 0;
>> +
>> +	/* find greatest USF */
>> +	while (usf < IEEE80211_MAX_USF) {
>> +		if (listen_interval % listen_int_usf[usf + 1])
>> +			break;
>> +		usf += 1;
>> +	}
>> +	ui = listen_interval / listen_int_usf[usf];
> 
> But you really only need it here in one place anyway.

OK better to keep it private to that file then.

-- 
thomas

[PATCH v2 15/22] mac80211: don't calculate duration for S1G

[Thomas Pedersen]

For now just skip the duration calculation for frames
transmitted on the S1G band and avoid a warning.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/tx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index d2136007e2eb..bef19616c5f0 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -82,6 +82,10 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
 
 	erp = txrate->flags & IEEE80211_RATE_ERP_G;
 
+	/* TODO */
+	if (sband->band == NL80211_BAND_S1GHZ)
+		return 0;
+
 	/*
 	 * data and mgmt (except PS Poll):
 	 * - during CFP: 32768
-- 
2.20.1

Re: [PATCH v2 15/22] mac80211: don't calculate duration for S1G

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> For now just skip the duration calculation for frames
> transmitted on the S1G band and avoid a warning.
> 
> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
> ---
>  net/mac80211/tx.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
> index d2136007e2eb..bef19616c5f0 100644
> --- a/net/mac80211/tx.c
> +++ b/net/mac80211/tx.c
> @@ -82,6 +82,10 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx,
>  
>  	erp = txrate->flags & IEEE80211_RATE_ERP_G;
>  
> +	/* TODO */
> +	if (sband->band == NL80211_BAND_S1GHZ)
> +		return 0;


I'm not even sure I'd leave a TODO there ... just say

	/* device is expected to do this */

or so?

johannes

Re: [PATCH v2 15/22] mac80211: don't calculate duration for S1G

[Johannes Berg]

Oops, sorry. I just realized I've been replying to v2, while *looking*
at v3 in patchwork ...

I'll continue on v3, but this seems mostly the same.

johannes

Re: [PATCH v2 15/22] mac80211: don't calculate duration for S1G

[Thomas Pedersen]

On 2020-09-18 03:52, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> For now just skip the duration calculation for frames
>> transmitted on the S1G band and avoid a warning.
>> 
>> Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
>> ---
>>  net/mac80211/tx.c | 4 ++++
>>  1 file changed, 4 insertions(+)
>> 
>> diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
>> index d2136007e2eb..bef19616c5f0 100644
>> --- a/net/mac80211/tx.c
>> +++ b/net/mac80211/tx.c
>> @@ -82,6 +82,10 @@ static __le16 ieee80211_duration(struct 
>> ieee80211_tx_data *tx,
>> 
>>  	erp = txrate->flags & IEEE80211_RATE_ERP_G;
>> 
>> +	/* TODO */
>> +	if (sband->band == NL80211_BAND_S1GHZ)
>> +		return 0;
> 
> 
> I'm not even sure I'd leave a TODO there ... just say
> 
> 	/* device is expected to do this */

Eventually it would be nice if mac80211 could calculate duration for 
S1G? Do you know why it doesn't for HT/VHT?

-- 
thomas

Re: [PATCH v2 15/22] mac80211: don't calculate duration for S1G

[Johannes Berg]

On Sun, 2020-09-20 at 23:03 -0700, Thomas Pedersen wrote:
> 
> > I'm not even sure I'd leave a TODO there ... just say
> > 
> > 	/* device is expected to do this */
> 
> Eventually it would be nice if mac80211 could calculate duration for 
> S1G? Do you know why it doesn't for HT/VHT?

I'm not sure it matters. It almost doesn't even matter for legacy
(CCK/OFDM) because devices practically always do it anyway?

And for HT/VHT it's just quite a bit more complicated, so we never
bothered, since it wasn't necessary.

It couldn't even really be done since there are A-MPDUs and other things
happening at a lower layer.

johannes

[PATCH v2 16/22] mac80211: handle S1G low rates

[Thomas Pedersen]

S1G doesn't have legacy (sband->bitrates) rates, only MCS.
For now, just send a frame at MCS 0 if a low rate is
requested. Note we also redefine (since we're out of TX
flags) TX_RC_VHT_MCS as TX_RC_S1G_MCS to indicate an S1G
MCS. This is probably OK as VHT MCS is not valid on S1G
band and vice versa.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/net/mac80211.h |  2 ++
 net/mac80211/rate.c    | 33 ++++++++++++++++++++++++++-------
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ec148b3e9c41..9ea743afb986 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -812,6 +812,8 @@ enum mac80211_tx_info_flags {
 
 #define IEEE80211_TX_CTL_STBC_SHIFT		23
 
+#define IEEE80211_TX_RC_S1G_MCS IEEE80211_TX_RC_VHT_MCS
+
 /**
  * enum mac80211_tx_control_flags - flags to describe transmit control
  *
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index b051f125d3af..63266d73c252 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -266,10 +266,15 @@ void ieee80211_check_rate_mask(struct ieee80211_sub_if_data *sdata)
 	if (WARN_ON(!sdata->vif.bss_conf.chandef.chan))
 		return;
 
+	band = sdata->vif.bss_conf.chandef.chan->band;
+	if (band == NL80211_BAND_S1GHZ) {
+		/* TODO */
+		return;
+	}
+
 	if (WARN_ON_ONCE(!basic_rates))
 		return;
 
-	band = sdata->vif.bss_conf.chandef.chan->band;
 	user_mask = sdata->rc_rateidx_mask[band];
 	sband = local->hw.wiphy->bands[band];
 
@@ -296,21 +301,29 @@ static bool rc_no_data_or_no_ack_use_min(struct ieee80211_tx_rate_control *txrc)
 		!ieee80211_is_data(fc);
 }
 
-static void rc_send_low_basicrate(s8 *idx, u32 basic_rates,
+static void rc_send_low_basicrate(struct ieee80211_tx_rate *rate,
+				  u32 basic_rates,
 				  struct ieee80211_supported_band *sband)
 {
 	u8 i;
 
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		/* TODO */
+		rate->flags |= IEEE80211_TX_RC_S1G_MCS;
+		rate->idx = 0;
+		return;
+	}
+
 	if (basic_rates == 0)
 		return; /* assume basic rates unknown and accept rate */
-	if (*idx < 0)
+	if (rate->idx < 0)
 		return;
-	if (basic_rates & (1 << *idx))
+	if (basic_rates & (1 << rate->idx))
 		return; /* selected rate is a basic rate */
 
-	for (i = *idx + 1; i <= sband->n_bitrates; i++) {
+	for (i = rate->idx + 1; i <= sband->n_bitrates; i++) {
 		if (basic_rates & (1 << i)) {
-			*idx = i;
+			rate->idx = i;
 			return;
 		}
 	}
@@ -328,6 +341,12 @@ static void __rate_control_send_low(struct ieee80211_hw *hw,
 	u32 rate_flags =
 		ieee80211_chandef_rate_flags(&hw->conf.chandef);
 
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		info->control.rates[0].flags |= IEEE80211_TX_RC_S1G_MCS;
+		info->control.rates[0].idx = 0;
+		return;
+	}
+
 	if ((sband->band == NL80211_BAND_2GHZ) &&
 	    (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE))
 		rate_flags |= IEEE80211_RATE_ERP_G;
@@ -388,7 +407,7 @@ static bool rate_control_send_low(struct ieee80211_sta *pubsta,
 		}
 
 		if (use_basicrate)
-			rc_send_low_basicrate(&info->control.rates[0].idx,
+			rc_send_low_basicrate(&info->control.rates[0],
 					      txrc->bss_conf->basic_rates,
 					      sband);
 
-- 
2.20.1

[PATCH v2 17/22] mac80211: avoid rate init for S1G band

[Thomas Pedersen]

minstrel_ht is confused by the lack of sband->bitrates,
and S1G will likely require a unique RC algorithm, so
avoid rate init for now if STA is on the S1G band.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/rate.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 63266d73c252..0cba7fed28cf 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -51,6 +51,12 @@ void rate_control_rate_init(struct sta_info *sta)
 
 	sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band];
 
+	/* TODO: check for minstrel_s1g ? */
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		rcu_read_unlock();
+		return;
+	}
+
 	spin_lock_bh(&sta->rate_ctrl_lock);
 	ref->ops->rate_init(ref->priv, sband, &chanctx_conf->def, ista,
 			    priv_sta);
-- 
2.20.1

[PATCH v2 18/22] mac80211: receive and process S1G beacons

[Thomas Pedersen]

S1G beacons are 802.11 Extension Frames, so the fixed
header part differs from regular beacons.

Add a handler to process S1G beacons and abstract out the
fetching of BSSID and element start locations in the
beacon body handler.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 net/mac80211/ieee80211_i.h |  4 ++
 net/mac80211/iface.c       |  5 +++
 net/mac80211/mlme.c        | 87 +++++++++++++++++++++++++++++---------
 net/mac80211/rx.c          | 84 ++++++++++++++++--------------------
 net/mac80211/util.c        | 52 +++++++++++++++++++++++
 5 files changed, 164 insertions(+), 68 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index cf78e356b25d..9847cfa0e08c 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1649,6 +1649,8 @@ int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 				  struct sk_buff *skb);
+void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb);
 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata);
 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata);
 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata);
@@ -2294,6 +2296,8 @@ void ieee80211_tdls_handle_disconnect(struct ieee80211_sub_if_data *sdata,
 				      const u8 *peer, u16 reason);
 const char *ieee80211_get_reason_code_string(u16 reason_code);
 __le16 ieee80211_encode_usf(int val);
+u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
+			enum nl80211_iftype type);
 
 extern const struct ethtool_ops ieee80211_ethtool_ops;
 
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 9740ae8fa697..1369f6e575d7 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1379,6 +1379,11 @@ static void ieee80211_iface_work(struct work_struct *work)
 				WARN_ON(1);
 				break;
 			}
+		} else if (ieee80211_is_ext(mgmt->frame_control)) {
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
+				ieee80211_sta_rx_queued_ext(sdata, skb);
+			else
+				WARN_ON(1);
 		} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
 			struct ieee80211_hdr *hdr = (void *)mgmt;
 			/*
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6a62a221b89e..9a26ef99cef9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1604,6 +1604,9 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
 	int new_ap_level;
 	__le16 capab = mgmt->u.probe_resp.capab_info;
 
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control))
+		return 0;	/* TODO */
+
 	if (country_ie &&
 	    (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
 	     capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
@@ -2450,7 +2453,8 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
 	 * data idle periods for sending the periodic probe request to the
 	 * AP we're connected to.
 	 */
-	if (is_multicast_ether_addr(hdr->addr1))
+	if (is_multicast_ether_addr(hdr->addr1) ||
+	    ieee80211_is_s1g_beacon(hdr->frame_control))
 		return;
 
 	ieee80211_sta_reset_conn_monitor(sdata);
@@ -3919,12 +3923,13 @@ static bool ieee80211_rx_our_beacon(const u8 *tx_bssid,
 	return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid);
 }
 
-static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
-				     struct ieee80211_mgmt *mgmt, size_t len,
-				     struct ieee80211_rx_status *rx_status)
+static void ieee80211_rx_beacon(struct ieee80211_sub_if_data *sdata,
+				struct ieee80211_hdr *hdr, size_t len,
+				struct ieee80211_rx_status *rx_status)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+	struct ieee80211_mgmt *mgmt = (void *) hdr;
 	size_t baselen;
 	struct ieee802_11_elems elems;
 	struct ieee80211_local *local = sdata->local;
@@ -3934,14 +3939,24 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	u32 changed = 0;
 	bool erp_valid;
 	u8 erp_value = 0;
-	u32 ncrc;
-	u8 *bssid;
+	u32 ncrc = 0;
+	u8 *bssid, *variable = mgmt->u.beacon.variable;
 	u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
 
 	sdata_assert_lock(sdata);
 
 	/* Process beacon from the current BSS */
-	baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
+	bssid = ieee80211_get_bssid(hdr, len, sdata->vif.type);
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		if (ieee80211_is_s1g_short_beacon(ext->frame_control))
+			variable = ext->u.s1g_short_beacon.variable;
+		else
+			variable = ext->u.s1g_beacon.variable;
+	}
+
+	baselen = (u8 *) variable - (u8 *) mgmt;
 	if (baselen > len)
 		return;
 
@@ -3961,10 +3976,10 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	rcu_read_unlock();
 
 	if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
-	    ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->assoc_data->bss)) {
-		ieee802_11_parse_elems(mgmt->u.beacon.variable,
+	    ieee80211_rx_our_beacon(bssid, ifmgd->assoc_data->bss)) {
+		ieee802_11_parse_elems(variable,
 				       len - baselen, false, &elems,
-				       mgmt->bssid,
+				       bssid,
 				       ifmgd->assoc_data->bss->bssid);
 
 		ieee80211_rx_bss_info(sdata, mgmt, len, rx_status);
@@ -3997,7 +4012,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (!ifmgd->associated ||
-	    !ieee80211_rx_our_beacon(mgmt->bssid,  ifmgd->associated))
+	    !ieee80211_rx_our_beacon(bssid,  ifmgd->associated))
 		return;
 	bssid = ifmgd->associated->bssid;
 
@@ -4017,8 +4032,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	 */
 	ieee80211_sta_reset_beacon_monitor(sdata);
 
-	ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
-	ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
+	/* TODO: CRC urrently not calculated on S1G Beacon Compatibility
+	 * element (which carries the beacon interval). Don't forget to add a
+	 * bit to care_about_ies[] above if mac80211 is interested in a
+	 * changing S1G element.
+	 */
+	if (!ieee80211_is_s1g_beacon(hdr->frame_control))
+		ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
+	ncrc = ieee802_11_parse_elems_crc(variable,
 					  len - baselen, false, &elems,
 					  care_about_ies, ncrc,
 					  mgmt->bssid, bssid);
@@ -4052,7 +4073,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		struct ieee80211_p2p_noa_attr noa = {};
 		int ret;
 
-		ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
+		ret = cfg80211_get_p2p_attr(variable,
 					    len - baselen,
 					    IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
 					    (u8 *) &noa, sizeof(noa));
@@ -4088,7 +4109,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	 * the driver will use them. The synchronized view is currently
 	 * guaranteed only in certain callbacks.
 	 */
-	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
+	if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
+	    !ieee80211_is_s1g_beacon(hdr->frame_control)) {
 		sdata->vif.bss_conf.sync_tsf =
 			le64_to_cpu(mgmt->u.beacon.timestamp);
 		sdata->vif.bss_conf.sync_device_ts =
@@ -4096,7 +4118,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count;
 	}
 
-	if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
+	if ((ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) ||
+	    ieee80211_is_s1g_short_beacon(mgmt->frame_control))
 		return;
 	ifmgd->beacon_crc = ncrc;
 	ifmgd->beacon_crc_valid = true;
@@ -4137,9 +4160,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	} else {
 		erp_valid = false;
 	}
-	changed |= ieee80211_handle_bss_capability(sdata,
-			le16_to_cpu(mgmt->u.beacon.capab_info),
-			erp_valid, erp_value);
+
+	if (!ieee80211_is_s1g_beacon(hdr->frame_control)) {
+		changed |= ieee80211_handle_bss_capability(sdata,
+				le16_to_cpu(mgmt->u.beacon.capab_info),
+				erp_valid, erp_value);
+	}
 
 	mutex_lock(&local->sta_mtx);
 	sta = sta_info_get(sdata, bssid);
@@ -4177,6 +4203,26 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	ieee80211_bss_info_change_notify(sdata, changed);
 }
 
+void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata,
+				 struct sk_buff *skb)
+{
+	struct ieee80211_rx_status *rx_status;
+	struct ieee80211_hdr *hdr;
+	u16 fc;
+
+	rx_status = (struct ieee80211_rx_status *) skb->cb;
+	hdr = (struct ieee80211_hdr *) skb->data;
+	fc = le16_to_cpu(hdr->frame_control);
+
+	sdata_lock(sdata);
+	switch (fc & IEEE80211_FCTL_STYPE) {
+	case IEEE80211_STYPE_S1G_BEACON:
+		ieee80211_rx_beacon(sdata, hdr, skb->len, rx_status);
+		break;
+	}
+	sdata_unlock(sdata);
+}
+
 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 				  struct sk_buff *skb)
 {
@@ -4194,7 +4240,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 
 	switch (fc & IEEE80211_FCTL_STYPE) {
 	case IEEE80211_STYPE_BEACON:
-		ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
+		ieee80211_rx_beacon(sdata, (struct ieee80211_hdr *) mgmt,
+				    skb->len, rx_status);
 		break;
 	case IEEE80211_STYPE_PROBE_RESP:
 		ieee80211_rx_mgmt_probe_resp(sdata, skb);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5b92f56682e2..e1291898bde8 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -42,51 +42,6 @@ static inline void ieee80211_rx_stats(struct net_device *dev, u32 len)
 	u64_stats_update_end(&tstats->syncp);
 }
 
-static u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
-			       enum nl80211_iftype type)
-{
-	__le16 fc = hdr->frame_control;
-
-	if (ieee80211_is_data(fc)) {
-		if (len < 24) /* drop incorrect hdr len (data) */
-			return NULL;
-
-		if (ieee80211_has_a4(fc))
-			return NULL;
-		if (ieee80211_has_tods(fc))
-			return hdr->addr1;
-		if (ieee80211_has_fromds(fc))
-			return hdr->addr2;
-
-		return hdr->addr3;
-	}
-
-	if (ieee80211_is_mgmt(fc)) {
-		if (len < 24) /* drop incorrect hdr len (mgmt) */
-			return NULL;
-		return hdr->addr3;
-	}
-
-	if (ieee80211_is_ctl(fc)) {
-		if (ieee80211_is_pspoll(fc))
-			return hdr->addr1;
-
-		if (ieee80211_is_back_req(fc)) {
-			switch (type) {
-			case NL80211_IFTYPE_STATION:
-				return hdr->addr2;
-			case NL80211_IFTYPE_AP:
-			case NL80211_IFTYPE_AP_VLAN:
-				return hdr->addr1;
-			default:
-				break; /* fall through to the return */
-			}
-		}
-	}
-
-	return NULL;
-}
-
 /*
  * monitor mode reception
  *
@@ -1801,7 +1756,8 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 		}
 	} else if (rx->sdata->vif.type == NL80211_IFTYPE_OCB) {
 		sta->rx_stats.last_rx = jiffies;
-	} else if (!is_multicast_ether_addr(hdr->addr1)) {
+	} else if (!ieee80211_is_s1g_beacon(hdr->frame_control) &&
+		   is_multicast_ether_addr(hdr->addr1)) {
 		/*
 		 * Mesh beacons will update last_rx when if they are found to
 		 * match the current local configuration when processed.
@@ -1839,6 +1795,9 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 		}
 	}
 
+	if (ieee80211_is_s1g_beacon(hdr->frame_control))
+		return RX_CONTINUE;
+
 	/*
 	 * Change STA power saving mode only at the end of a frame
 	 * exchange sequence, and only for a data or management
@@ -1949,6 +1908,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	__le16 fc;
 	const struct ieee80211_cipher_scheme *cs = NULL;
 
+	if (ieee80211_is_ext(hdr->frame_control))
+		return RX_CONTINUE;
+
 	/*
 	 * Key selection 101
 	 *
@@ -2257,7 +2219,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx)
 	hdr = (struct ieee80211_hdr *)rx->skb->data;
 	fc = hdr->frame_control;
 
-	if (ieee80211_is_ctl(fc))
+	if (ieee80211_is_ctl(fc) || ieee80211_is_ext(fc))
 		return RX_CONTINUE;
 
 	sc = le16_to_cpu(hdr->seq_ctrl);
@@ -3131,6 +3093,9 @@ ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx)
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
 
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control))
+		return RX_CONTINUE;
+
 	/*
 	 * From here on, look only at management frames.
 	 * Data and control frames are already handled,
@@ -3597,6 +3562,27 @@ ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx)
 	return RX_QUEUED;
 }
 
+static ieee80211_rx_result debug_noinline
+ieee80211_rx_h_ext(struct ieee80211_rx_data *rx)
+{
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct ieee80211_hdr *hdr = (void *)rx->skb->data;
+
+	if (!ieee80211_is_ext(hdr->frame_control))
+		return RX_CONTINUE;
+
+	if (sdata->vif.type != NL80211_IFTYPE_STATION)
+		return RX_DROP_MONITOR;
+
+	/* for now only beacons are ext, so queue them */
+	skb_queue_tail(&sdata->skb_queue, rx->skb);
+	ieee80211_queue_work(&rx->local->hw, &sdata->work);
+	if (rx->sta)
+		rx->sta->rx_stats.packets++;
+
+	return RX_QUEUED;
+}
+
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
 {
@@ -3816,6 +3802,7 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
 		CALL_RXH(ieee80211_rx_h_userspace_mgmt);
 		CALL_RXH(ieee80211_rx_h_action_post_userspace);
 		CALL_RXH(ieee80211_rx_h_action_return);
+		CALL_RXH(ieee80211_rx_h_ext);
 		CALL_RXH(ieee80211_rx_h_mgmt);
 
  rxh_next:
@@ -3982,7 +3969,8 @@ static bool ieee80211_accept_frame(struct ieee80211_rx_data *rx)
 	struct ieee80211_hdr *hdr = (void *)skb->data;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	u8 *bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type);
-	bool multicast = is_multicast_ether_addr(hdr->addr1);
+	bool multicast = is_multicast_ether_addr(hdr->addr1) ||
+			 ieee80211_is_s1g_beacon(hdr->frame_control);
 
 	switch (sdata->vif.type) {
 	case NL80211_IFTYPE_STATION:
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 57c6f8bd2bdf..31845e392759 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -45,6 +45,58 @@ struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy)
 }
 EXPORT_SYMBOL(wiphy_to_ieee80211_hw);
 
+u8 *ieee80211_get_bssid(struct ieee80211_hdr *hdr, size_t len,
+			enum nl80211_iftype type)
+{
+	__le16 fc = hdr->frame_control;
+
+	if (ieee80211_is_data(fc)) {
+		if (len < 24) /* drop incorrect hdr len (data) */
+			return NULL;
+
+		if (ieee80211_has_a4(fc))
+			return NULL;
+		if (ieee80211_has_tods(fc))
+			return hdr->addr1;
+		if (ieee80211_has_fromds(fc))
+			return hdr->addr2;
+
+		return hdr->addr3;
+	}
+
+	if (ieee80211_is_s1g_beacon(fc)) {
+		struct ieee80211_ext *ext = (void *) hdr;
+
+		return ext->u.s1g_beacon.sa;
+	}
+
+	if (ieee80211_is_mgmt(fc)) {
+		if (len < 24) /* drop incorrect hdr len (mgmt) */
+			return NULL;
+		return hdr->addr3;
+	}
+
+	if (ieee80211_is_ctl(fc)) {
+		if (ieee80211_is_pspoll(fc))
+			return hdr->addr1;
+
+		if (ieee80211_is_back_req(fc)) {
+			switch (type) {
+			case NL80211_IFTYPE_STATION:
+				return hdr->addr2;
+			case NL80211_IFTYPE_AP:
+			case NL80211_IFTYPE_AP_VLAN:
+				return hdr->addr1;
+			default:
+				break; /* fall through to the return */
+			}
+		}
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(ieee80211_get_bssid);
+
 void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx)
 {
 	struct sk_buff *skb;
-- 
2.20.1

[PATCH v2 19/22] mac80211: support S1G association

[Thomas Pedersen]

The changes required for associating in S1G are:

- apply S1G BSS channel info before assoc
- mark all S1G STAs as QoS STAs
- include and parse AID request element
- handle new Association Response format
- don't fail assoc if supported rates element is missing

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/linux/ieee80211.h  | 21 ++++++++++
 include/net/mac80211.h     |  1 +
 net/mac80211/cfg.c         |  2 +
 net/mac80211/ibss.c        |  3 +-
 net/mac80211/ieee80211_i.h |  4 ++
 net/mac80211/mlme.c        | 80 ++++++++++++++++++++++++++++++++------
 net/mac80211/util.c        | 55 ++++++++++++++++++++++++++
 7 files changed, 153 insertions(+), 13 deletions(-)

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index a63ad4b4f973..1634650a44ce 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -987,6 +987,25 @@ enum ieee80211_vht_opmode_bits {
 	IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF	= 0x80,
 };
 
+/**
+ * enum ieee80211_s1g_chanwidth
+ * These are defined in IEEE802.11-2016ah Table 10-20
+ * as BSS Channel Width
+ *
+ * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel
+ */
+enum ieee80211_s1g_chanwidth {
+	IEEE80211_S1G_CHANWIDTH_1MHZ = 0,
+	IEEE80211_S1G_CHANWIDTH_2MHZ = 1,
+	IEEE80211_S1G_CHANWIDTH_4MHZ = 3,
+	IEEE80211_S1G_CHANWIDTH_8MHZ = 7,
+	IEEE80211_S1G_CHANWIDTH_16MHZ = 15,
+};
+
 #define WLAN_SA_QUERY_TR_ID_LEN 2
 #define WLAN_MEMBERSHIP_LEN 8
 #define WLAN_USER_POSITION_LEN 16
@@ -2854,6 +2873,8 @@ enum ieee80211_eid {
 
 	WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201,
 
+	WLAN_EID_AID_REQUEST = 210,
+	WLAN_EID_AID_RESPONSE = 211,
 	WLAN_EID_S1G_BCN_COMPAT = 213,
 	WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214,
 	WLAN_EID_S1G_CAPABILITIES = 217,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9ea743afb986..bc78edf1c994 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -674,6 +674,7 @@ struct ieee80211_bss_conf {
 	} he_oper;
 	struct ieee80211_he_obss_pd he_obss_pd;
 	struct cfg80211_he_bss_color he_bss_color;
+	bool s1g;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index b4e39e31a985..086e51a78394 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1071,6 +1071,8 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 	       sizeof(struct ieee80211_he_obss_pd));
 	memcpy(&sdata->vif.bss_conf.he_bss_color, &params->he_bss_color,
 	       sizeof(struct ieee80211_he_bss_color));
+	sdata->vif.bss_conf.s1g = params->chandef.chan->band ==
+				  NL80211_BAND_S1GHZ;
 
 	sdata->vif.bss_conf.ssid_len = params->ssid_len;
 	if (params->ssid_len)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index c0963969a465..1f552f374e97 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1037,7 +1037,8 @@ static void ieee80211_update_sta_info(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (sta && !sta->sta.wme &&
-	    elems->wmm_info && local->hw.queues >= IEEE80211_NUM_ACS) {
+	    (elems->wmm_info || elems->s1g_capab) &&
+	    local->hw.queues >= IEEE80211_NUM_ACS) {
 		sta->sta.wme = true;
 		ieee80211_check_fast_xmit(sta);
 	}
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 9847cfa0e08c..60786e4b9f5f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1531,6 +1531,7 @@ struct ieee802_11_elems {
 	const struct ieee80211_s1g_oper_ie *s1g_oper;
 	const u8 *s1g_tsbtt;
 	const struct ieee80211_s1g_bcn_compat_ie *s1g_bcn_compat;
+	const struct ieee80211_aid_response_ie *aid_resp;
 
 	/* length of them, respectively */
 	u8 ext_capab_len;
@@ -2206,6 +2207,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata,
 u8 *ieee80211_add_wmm_info_ie(u8 *buf, u8 qosinfo);
 u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
 			       struct ieee80211_sta_s1g_cap *caps, u8 *buf);
+u8 *ieee80211_add_aid_request_ie(struct ieee80211_sub_if_data *sdata, u8 *buf);
 
 /* channel management */
 bool ieee80211_chandef_ht_oper(const struct ieee80211_ht_operation *ht_oper,
@@ -2217,6 +2219,8 @@ bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, u32 vht_cap_info,
 bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
 				    const struct ieee80211_he_operation *he_oper,
 				    struct cfg80211_chan_def *chandef);
+bool ieee80211_chandef_s1g_oper(const struct ieee80211_s1g_oper_ie *oper,
+				struct cfg80211_chan_def *chandef);
 u32 ieee80211_chandef_downgrade(struct cfg80211_chan_def *c);
 
 int __must_check
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9a26ef99cef9..2476d4a9596c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -149,6 +149,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 			     const struct ieee80211_ht_operation *ht_oper,
 			     const struct ieee80211_vht_operation *vht_oper,
 			     const struct ieee80211_he_operation *he_oper,
+			     const struct ieee80211_s1g_oper_ie *s1g_oper,
 			     struct cfg80211_chan_def *chandef, bool tracking)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -176,6 +177,15 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
 	memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
 	ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
 
+	if (s1g_oper && sband->band == NL80211_BAND_S1GHZ) {
+		ieee80211_chandef_s1g_oper(s1g_oper, chandef);
+		ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_40MHZ |
+		      IEEE80211_STA_DISABLE_VHT |
+		      IEEE80211_STA_DISABLE_80P80MHZ |
+		      IEEE80211_STA_DISABLE_160MHZ;
+		goto out;
+	}
+
 	if (!ht_oper || !sta_ht_cap.ht_supported) {
 		ret = IEEE80211_STA_DISABLE_HT |
 		      IEEE80211_STA_DISABLE_VHT |
@@ -347,6 +357,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 			       const struct ieee80211_ht_operation *ht_oper,
 			       const struct ieee80211_vht_operation *vht_oper,
 			       const struct ieee80211_he_operation *he_oper,
+			       const struct ieee80211_s1g_oper_ie *s1g_oper,
 			       const u8 *bssid, u32 *changed)
 {
 	struct ieee80211_local *local = sdata->local;
@@ -393,7 +404,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 	/* calculate new channel (type) based on HT/VHT/HE operation IEs */
 	flags = ieee80211_determine_chantype(sdata, sband, chan, vht_cap_info,
 					     ht_oper, vht_oper, he_oper,
-					     &chandef, true);
+					     s1g_oper, &chandef, true);
 
 	/*
 	 * Downgrade the new channel if we associated with restricted
@@ -812,6 +823,9 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	*pos++ = assoc_data->ssid_len;
 	memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
 
+	if (bss->s1g)
+		goto skip_rates;
+
 	/* add all rates which were marked to be used above */
 	supp_rates_len = rates_len;
 	if (supp_rates_len > 8)
@@ -847,6 +861,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		}
 	}
 
+skip_rates:
 	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
 	    capab & WLAN_CAPABILITY_RADIO_MEASURE) {
 		pos = skb_put(skb, 4);
@@ -1021,9 +1036,11 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
 	}
 
-	if (sband->band == NL80211_BAND_S1GHZ)
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		pos = ieee80211_add_aid_request_ie(sdata, skb_put(skb, 3));
 		pos = ieee80211_add_s1g_capab_ie(sdata, &sband->s1g_cap,
 						 skb_put(skb, 17));
+	}
 
 	/* add any remaining custom (i.e. vendor specific here) IEs */
 	if (assoc_data->ie_len) {
@@ -3270,6 +3287,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 				    struct ieee802_11_elems *elems)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct ieee80211_bss *bss = (void *)cbss->priv;
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
 	struct sta_info *sta;
@@ -3279,13 +3297,24 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
 	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
 	u32 changed = 0;
+	u8 *pos;
 	int err;
 	bool ret;
 
 	/* AssocResp and ReassocResp have identical structure */
 
+	pos = mgmt->u.assoc_resp.variable;
 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
+	if (bss->s1g) {
+		pos = (u8 *) mgmt->u.s1g_assoc_resp.variable;
+		aid = 0; /* TODO */
+	}
 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
+	ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, elems,
+			       mgmt->bssid, assoc_data->bss->bssid);
+
+	if (elems->aid_resp)
+		aid = le16_to_cpu(elems->aid_resp->aid);
 
 	/*
 	 * The 5 MSB of the AID field are reserved
@@ -3302,7 +3331,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		ifmgd->broken_ap = true;
 	}
 
-	if (!elems->supp_rates) {
+	if (!bss->s1g && !elems->supp_rates) {
 		sdata_info(sdata, "no SuppRates element in AssocResp\n");
 		return false;
 	}
@@ -3544,7 +3573,8 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 		sta->sta.mfp = false;
 	}
 
-	sta->sta.wme = elems->wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
+	sta->sta.wme = (elems->wmm_param || elems->s1g_capab) &&
+		       local->hw.queues >= IEEE80211_NUM_ACS;
 
 	err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
 	if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
@@ -3636,7 +3666,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	int ac, uapsd_queues = -1;
 	u8 *pos;
 	bool reassoc;
-	struct cfg80211_bss *bss;
+	struct cfg80211_bss *cbss;
+	struct ieee80211_bss *bss;
 	struct ieee80211_event event = {
 		.type = MLME_EVENT,
 		.u.mlme.data = ASSOC_EVENT,
@@ -3646,9 +3677,13 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 
 	if (!assoc_data)
 		return;
+
 	if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
 		return;
 
+	cbss = assoc_data->bss;
+	bss = (void *) cbss->priv;
+
 	/*
 	 * AssocResp and ReassocResp have identical structure, so process both
 	 * of them in this function.
@@ -3660,7 +3695,12 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
 	capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
 	status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
+	pos = mgmt->u.assoc_resp.variable;
 	aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
+	if (bss->s1g) {
+		pos = (u8 *) mgmt->u.s1g_assoc_resp.variable;
+		aid = 0; /* TODO */
+	}
 
 	sdata_info(sdata,
 		   "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
@@ -3671,7 +3711,6 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	    fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
 		return;
 
-	pos = mgmt->u.assoc_resp.variable;
 	ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems,
 			       mgmt->bssid, assoc_data->bss->bssid);
 
@@ -3691,8 +3730,6 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		return;
 	}
 
-	bss = assoc_data->bss;
-
 	if (status_code != WLAN_STATUS_SUCCESS) {
 		sdata_info(sdata, "%pM denied association (code=%d)\n",
 			   mgmt->sa, status_code);
@@ -3701,10 +3738,10 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 		event.u.mlme.reason = status_code;
 		drv_event_callback(sdata->local, sdata, &event);
 	} else {
-		if (!ieee80211_assoc_success(sdata, bss, mgmt, len, &elems)) {
+		if (!ieee80211_assoc_success(sdata, cbss, mgmt, len, &elems)) {
 			/* oops -- internal error -- send timeout for now */
 			ieee80211_destroy_assoc_data(sdata, false, false);
-			cfg80211_assoc_timeout(sdata->dev, bss);
+			cfg80211_assoc_timeout(sdata->dev, cbss);
 			return;
 		}
 		event.u.mlme.status = MLME_SUCCESS;
@@ -3725,7 +3762,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 				uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
 	}
 
-	cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues,
+	cfg80211_rx_assoc_resp(sdata->dev, cbss, (u8 *)mgmt, len, uapsd_queues,
 			       ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len);
 }
 
@@ -4175,7 +4212,7 @@ static void ieee80211_rx_beacon(struct ieee80211_sub_if_data *sdata,
 	if (ieee80211_config_bw(sdata, sta, elems.ht_cap_elem,
 				elems.vht_cap_elem, elems.ht_operation,
 				elems.vht_operation, elems.he_operation,
-				bssid, &changed)) {
+				elems.s1g_oper, bssid, &changed)) {
 		mutex_unlock(&local->sta_mtx);
 		sdata_info(sdata,
 			   "failed to follow AP %pM bandwidth change, disconnect\n",
@@ -4912,6 +4949,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	const struct ieee80211_ht_operation *ht_oper = NULL;
 	const struct ieee80211_vht_operation *vht_oper = NULL;
 	const struct ieee80211_he_operation *he_oper = NULL;
+	const struct ieee80211_s1g_oper_ie *s1g_oper = NULL;
 	struct ieee80211_supported_band *sband;
 	struct cfg80211_chan_def chandef;
 	bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ;
@@ -5014,10 +5052,23 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	if (!have_80mhz)
 		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
 
+	if (sband->band == NL80211_BAND_S1GHZ) {
+		const u8 *s1g_oper_ie;
+
+		s1g_oper_ie = ieee80211_bss_get_ie(cbss,
+						   WLAN_EID_S1G_OPERATION);
+		if (s1g_oper_ie && s1g_oper_ie[1] >= sizeof(*s1g_oper))
+			s1g_oper = (void *)(s1g_oper_ie + 2);
+		else
+			sdata_info(sdata,
+				   "AP missing S1G operation element?\n");
+	}
+
 	ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
 						     cbss->channel,
 						     bss->vht_cap_info,
 						     ht_oper, vht_oper, he_oper,
+						     s1g_oper,
 						     &chandef, false);
 
 	sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
@@ -5144,6 +5195,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		const struct cfg80211_bss_ies *ies;
 		int shift = ieee80211_vif_get_shift(&sdata->vif);
 
+		/* TODO: S1G Basic Rate Set is expressed elsewhere */
+		if (cbss->channel->band == NL80211_BAND_S1GHZ)
+			goto skip_rates;
+
 		ieee80211_get_rates(sband, bss->supp_rates,
 				    bss->supp_rates_len,
 				    &rates, &basic_rates,
@@ -5188,6 +5243,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 		else
 			sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
 
+skip_rates:
 		memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
 
 		/* set timing information */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 31845e392759..46cff63fea12 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1058,6 +1058,7 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 		case WLAN_EID_S1G_BCN_COMPAT:
 		case WLAN_EID_S1G_CAPABILITIES:
 		case WLAN_EID_S1G_OPERATION:
+		case WLAN_EID_AID_RESPONSE:
 		case WLAN_EID_S1G_SHORT_BCN_INTERVAL:
 		/*
 		 * not listing WLAN_EID_CHANNEL_SWITCH_WRAPPER -- it seems possible
@@ -1368,6 +1369,12 @@ _ieee802_11_parse_elems_crc(const u8 *start, size_t len, bool action,
 			else
 				elem_parse_failed = true;
 			break;
+		case WLAN_EID_AID_RESPONSE:
+			if (elen == sizeof(struct ieee80211_aid_response_ie))
+				elems->aid_resp = (void *)pos;
+			else
+				elem_parse_failed = true;
+			break;
 		default:
 			break;
 		}
@@ -3450,6 +3457,42 @@ bool ieee80211_chandef_he_6ghz_oper(struct ieee80211_sub_if_data *sdata,
 
 	*chandef = he_chandef;
 
+	return false;
+}
+
+bool ieee80211_chandef_s1g_oper(const struct ieee80211_s1g_oper_ie *oper,
+				struct cfg80211_chan_def *chandef)
+{
+	u32 oper_freq;
+
+	if (!oper)
+		return false;
+
+	switch (FIELD_GET(S1G_OPER_CH_WIDTH_OPER, oper->ch_width)) {
+	case IEEE80211_S1G_CHANWIDTH_1MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_1;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_2MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_2;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_4MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_4;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_8MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_8;
+		break;
+	case IEEE80211_S1G_CHANWIDTH_16MHZ:
+		chandef->width = NL80211_CHAN_WIDTH_16;
+		break;
+	default:
+		return false;
+	}
+
+	oper_freq = ieee80211_channel_to_freq_khz(oper->oper_ch,
+						  NL80211_BAND_S1GHZ);
+	chandef->center_freq1 = KHZ_TO_MHZ(oper_freq);
+	chandef->freq1_offset = oper_freq % 1000;
+
 	return true;
 }
 
@@ -4356,6 +4399,18 @@ int ieee80211_max_num_channels(struct ieee80211_local *local)
 	return max_num_different_channels;
 }
 
+u8 *ieee80211_add_aid_request_ie(struct ieee80211_sub_if_data *sdata, u8 *buf)
+{
+	u8 *pos = buf;
+
+	*pos++ = WLAN_EID_AID_REQUEST;
+	*pos++ = 1;
+
+	*pos++ = 0;
+
+	return pos;
+}
+
 u8 *ieee80211_add_s1g_capab_ie(struct ieee80211_sub_if_data *sdata,
 			       struct ieee80211_sta_s1g_cap *own_cap, u8 *buf)
 {
-- 
2.20.1

[PATCH v2 20/22] nl80211: include frequency offset in survey info

[Thomas Pedersen]

Recently channels gained a potential frequency offset, so
include this in the per-channel survey info.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 include/uapi/linux/nl80211.h | 2 ++
 net/wireless/nl80211.c       | 5 +++++
 2 files changed, 7 insertions(+)

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 70076492ebc9..dd5591794e48 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -4085,6 +4085,7 @@ enum nl80211_user_reg_hint_type {
  *	receiving frames destined to the local BSS
  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
  *	currently defined
+ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
  */
 enum nl80211_survey_info {
@@ -4100,6 +4101,7 @@ enum nl80211_survey_info {
 	NL80211_SURVEY_INFO_TIME_SCAN,
 	NL80211_SURVEY_INFO_PAD,
 	NL80211_SURVEY_INFO_TIME_BSS_RX,
+	NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
 
 	/* keep last */
 	__NL80211_SURVEY_INFO_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 578d99088719..5468c02d0927 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -9224,6 +9224,11 @@ static int nl80211_send_survey(struct sk_buff *msg, u32 portid, u32 seq,
 			survey->channel->center_freq))
 		goto nla_put_failure;
 
+	if (survey->channel &&
+	    nla_put_u32(msg, NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
+			survey->channel->freq_offset))
+		goto nla_put_failure;
+
 	if ((survey->filled & SURVEY_INFO_NOISE_DBM) &&
 	    nla_put_u8(msg, NL80211_SURVEY_INFO_NOISE, survey->noise))
 		goto nla_put_failure;
-- 
2.20.1

[PATCH v2 21/22] mac80211_hwsim: indicate support for S1G

[Thomas Pedersen]

Advertise S1G Capabilities and channels to mac80211.

Requires a few fixups to account for missing
sband->bitrates, and a custom regulatory db to actually
enable the S1G channels.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>

---
v2:
 - split out changes to ieee80211.h in a separate commit
   and use GENMASK + FIELD_GET (Kalle)
---
 drivers/net/wireless/mac80211_hwsim.c | 79 ++++++++++++++++++++++++---
 1 file changed, 72 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index dce3bc9c9f84..83d8f54ef93e 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -377,6 +377,49 @@ static const struct ieee80211_channel hwsim_channels_5ghz[] = {
 	CHAN5G(5925), /* Channel 185 */
 };
 
+#define NUM_S1G_CHANS_US 51
+static struct ieee80211_channel hwsim_channels_s1g[NUM_S1G_CHANS_US];
+
+static const struct ieee80211_sta_s1g_cap hwsim_s1g_cap = {
+	.s1g = true,
+	.cap = { S1G_CAP0_SGI_1MHZ | S1G_CAP0_SGI_2MHZ,
+		 0,
+		 0,
+		 S1G_CAP3_MAX_MPDU_LEN,
+		 0,
+		 S1G_CAP5_AMPDU,
+		 0,
+		 S1G_CAP7_DUP_1MHZ,
+		 S1G_CAP8_TWT_RESPOND | S1G_CAP8_TWT_REQUEST,
+		 0},
+	.nss_mcs = { 0xfc | 1, /* MCS 7 for 1 SS */
+	/* RX Highest Supported Long GI Data Rate 0:7 */
+		     0,
+	/* RX Highest Supported Long GI Data Rate 0:7 */
+	/* TX S1G MCS Map 0:6 */
+		     0xfa,
+	/* TX S1G MCS Map :7 */
+	/* TX Highest Supported Long GI Data Rate 0:6 */
+		     0x80,
+	/* TX Highest Supported Long GI Data Rate 7:8 */
+	/* Rx Single spatial stream and S1G-MCS Map for 1MHz */
+	/* Tx Single spatial stream and S1G-MCS Map for 1MHz */
+		     0 },
+};
+
+static void hwsim_init_s1g_channels(struct ieee80211_channel *channels)
+{
+	int ch, freq;
+
+	for (ch = 0; ch < NUM_S1G_CHANS_US; ch++) {
+		freq = 902000 + (ch + 1) * 500;
+		channels[ch].band = NL80211_BAND_S1GHZ;
+		channels[ch].center_freq = KHZ_TO_MHZ(freq);
+		channels[ch].freq_offset = freq % 1000;
+		channels[ch].hw_value = ch + 1;
+	}
+}
+
 static const struct ieee80211_rate hwsim_rates[] = {
 	{ .bitrate = 10 },
 	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
@@ -505,6 +548,7 @@ struct mac80211_hwsim_data {
 	struct ieee80211_supported_band bands[NUM_NL80211_BANDS];
 	struct ieee80211_channel channels_2ghz[ARRAY_SIZE(hwsim_channels_2ghz)];
 	struct ieee80211_channel channels_5ghz[ARRAY_SIZE(hwsim_channels_5ghz)];
+	struct ieee80211_channel channels_s1g[ARRAY_SIZE(hwsim_channels_s1g)];
 	struct ieee80211_rate rates[ARRAY_SIZE(hwsim_rates)];
 	struct ieee80211_iface_combination if_combination;
 	struct ieee80211_iface_limit if_limits[3];
@@ -900,12 +944,14 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw,
 	struct mac80211_hwsim_data *data = hw->priv;
 	struct sk_buff *skb;
 	struct hwsim_radiotap_hdr *hdr;
-	u16 flags;
+	u16 flags, bitrate;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx_skb);
 	struct ieee80211_rate *txrate = ieee80211_get_tx_rate(hw, info);
 
-	if (WARN_ON(!txrate))
-		return;
+	if (!txrate)
+		bitrate = 0;
+	else
+		bitrate = txrate->bitrate;
 
 	if (!netif_running(hwsim_mon))
 		return;
@@ -924,10 +970,10 @@ static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw,
 					  (1 << IEEE80211_RADIOTAP_CHANNEL));
 	hdr->rt_tsft = __mac80211_hwsim_get_tsf(data);
 	hdr->rt_flags = 0;
-	hdr->rt_rate = txrate->bitrate / 5;
+	hdr->rt_rate = bitrate / 5;
 	hdr->rt_channel = cpu_to_le16(chan->center_freq);
 	flags = IEEE80211_CHAN_2GHZ;
-	if (txrate->flags & IEEE80211_RATE_ERP_G)
+	if (txrate && txrate->flags & IEEE80211_RATE_ERP_G)
 		flags |= IEEE80211_CHAN_OFDM;
 	else
 		flags |= IEEE80211_CHAN_CCK;
@@ -1341,6 +1387,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw,
 	memset(&rx_status, 0, sizeof(rx_status));
 	rx_status.flag |= RX_FLAG_MACTIME_START;
 	rx_status.freq = chan->center_freq;
+	rx_status.freq_offset = chan->freq_offset ? 1 : 0;
 	rx_status.band = chan->band;
 	if (info->control.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) {
 		rx_status.rate_idx =
@@ -1522,14 +1569,18 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw,
 		/* fake header transmission time */
 		struct ieee80211_mgmt *mgmt;
 		struct ieee80211_rate *txrate;
+		/* TODO: get MCS */
+		int bitrate = 100;
 		u64 ts;
 
 		mgmt = (struct ieee80211_mgmt *)skb->data;
 		txrate = ieee80211_get_tx_rate(hw, txi);
+		if (txrate)
+			bitrate = txrate->bitrate;
 		ts = mac80211_hwsim_get_tsf_raw();
 		mgmt->u.probe_resp.timestamp =
 			cpu_to_le64(ts + data->tsf_offset +
-				    24 * 8 * 10 / txrate->bitrate);
+				    24 * 8 * 10 / bitrate);
 	}
 
 	mac80211_hwsim_monitor_rx(hw, skb, channel);
@@ -1664,6 +1715,8 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 	struct ieee80211_rate *txrate;
 	struct ieee80211_mgmt *mgmt;
 	struct sk_buff *skb;
+	/* TODO: get MCS */
+	int bitrate = 100;
 
 	hwsim_check_magic(vif);
 
@@ -1683,13 +1736,15 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 				       ARRAY_SIZE(info->control.rates));
 
 	txrate = ieee80211_get_tx_rate(hw, info);
+	if (txrate)
+		bitrate = txrate->bitrate;
 
 	mgmt = (struct ieee80211_mgmt *) skb->data;
 	/* fake header transmission time */
 	data->abs_bcn_ts = mac80211_hwsim_get_tsf_raw();
 	mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts +
 					       data->tsf_offset +
-					       24 * 8 * 10 / txrate->bitrate);
+					       24 * 8 * 10 / bitrate);
 
 	mac80211_hwsim_tx_frame(hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
@@ -3079,6 +3134,8 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 		sizeof(hwsim_channels_2ghz));
 	memcpy(data->channels_5ghz, hwsim_channels_5ghz,
 		sizeof(hwsim_channels_5ghz));
+	memcpy(data->channels_s1g, hwsim_channels_s1g,
+	       sizeof(hwsim_channels_s1g));
 	memcpy(data->rates, hwsim_rates, sizeof(hwsim_rates));
 
 	for (band = NL80211_BAND_2GHZ; band < NUM_NL80211_BANDS; band++) {
@@ -3121,6 +3178,12 @@ static int mac80211_hwsim_new_radio(struct genl_info *info,
 			sband->vht_cap.vht_mcs.tx_mcs_map =
 				sband->vht_cap.vht_mcs.rx_mcs_map;
 			break;
+		case NL80211_BAND_S1GHZ:
+			memcpy(&sband->s1g_cap, &hwsim_s1g_cap,
+			       sizeof(sband->s1g_cap));
+			sband->channels = data->channels_s1g;
+			sband->n_channels = ARRAY_SIZE(hwsim_channels_s1g);
+			break;
 		default:
 			continue;
 		}
@@ -4318,6 +4381,8 @@ static int __init init_mac80211_hwsim(void)
 		goto out_exit_virtio;
 	}
 
+	hwsim_init_s1g_channels(hwsim_channels_s1g);
+
 	for (i = 0; i < radios; i++) {
 		struct hwsim_new_radio_params param = { 0 };
 
-- 
2.20.1

[mac80211_hwsim] 8cafe19852: hwsim.fst_ap_config_default.fail

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2903 bytes --]

Greeting,

FYI, we noticed the following commit (built with gcc-9):

commit: 8cafe19852d95d6494cbd8c1ae24dbd621588a91 ("[PATCH v2 21/22] mac80211_hwsim: indicate support for S1G")
url: https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-support-for-S1G-association/20200901-045826
base: https://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git master

in testcase: hwsim
version: hwsim-x86_64-6eb6cf0-1_20200619
with following parameters:

	group: hwsim-19
	ucode: 0x21



on test machine: 8 threads Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz with 16G memory

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):



If you fix the issue, kindly add following tag
Reported-by: kernel test robot <rong.a.chen@intel.com>



2020-09-05 17:49:30 	./run-tests.py fst_ap_config_default 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_default 1/1
Test: FST AP configuration default parameters
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
hostapd didn't start with valid config parameters
Traceback (most recent call last):
  File "./run-tests.py", line 531, in main
    t(dev, apdev, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_config.py", line 406, in test_fst_ap_config_default
    raise Exception("hostapd didn't start with valid config parameters")
Exception: hostapd didn't start with valid config parameters
FAIL fst_ap_config_default 1.201026 2020-09-05 17:49:31.626224
passed 0 test case(s)
skipped 0 test case(s)
failed tests: fst_ap_config_default
2020-09-05 17:49:31 	./run-tests.py fst_ap_config_good 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_good 1/1
Test: FST AP configuration good parameters
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
hostapd didn't start with valid config parameters
Traceback (most recent call last):
  File "./run-tests.py", line 531, in main
    t(dev, apdev, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_config.py", line 400, in test_fst_ap_config_good
    raise Exception("hostapd didn't start with valid config parameters")
Exception: hostapd didn't start with valid config parameters
FAIL fst_ap_config_good 1.214574 2020-09-05 17:49:32.968016
passed 0 test case(s)
skipped 0 test case(s)
failed tests: fst_ap_config_good


To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp install job.yaml  # job file is attached in this email
        bin/lkp run     job.yaml



Thanks,
Rong Chen


[-- Attachment #2: config-5.9.0-rc1-00605-g8cafe19852d95d --]
[-- Type: text/plain, Size: 170246 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.9.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-15) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_LD_VERSION=235000000
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_LSM is not set
CONFIG_BPF_SYSCALL=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
# CONFIG_XEN_PV is not set
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
CONFIG_PERF_EVENTS_AMD_POWER=m
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_DPTF_POWER=m
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
CONFIG_PMIC_OPREGION=y
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAPPING_DIRTY_HELPERS=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_SMC is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
# CONFIG_MPTCP_KUNIT_TESTS is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
CONFIG_NF_LOG_NETDEV=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
CONFIG_NF_LOG_BRIDGE=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_MEDIA_IB is not set
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_MTKSDIO is not set
# end of Bluetooth device drivers

# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_RDMA is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_PM_QOS_KUNIT_TEST is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_KUNIT_DRIVER_PE_TEST=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
# CONFIG_NVME_RDMA is not set
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
# CONFIG_NVME_TARGET_RDMA is not set
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
CONFIG_PVPANIC=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC & related support
#
# CONFIG_INTEL_MIC_BUS is not set
# CONFIG_SCIF_BUS is not set
# CONFIG_VOP_BUS is not set
# end of Intel MIC & related support

# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
# CONFIG_DM_ZONED is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set

#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_CHELSIO_INLINE_CRYPTO=y
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
CONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKGE_GENESIS is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set
# CONFIG_MDIO_XPCS is not set
CONFIG_PHYLIB=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_ADIN_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
# CONFIG_USB_VL600 is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
# CONFIG_MT7663U is not set
# CONFIG_MT7663S is not set
# CONFIG_MT7915E is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not set
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
CONFIG_NVM=y
# CONFIG_NVM_PBLK is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
# CONFIG_TRACE_SINK is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
CONFIG_NVRAM=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# end of Character devices

# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=m
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
# CONFIG_SENSORS_AMD_ENERGY is not set
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not set
CONFIG_PROC_THERMAL_MMIO_RAPL=y
# end of ACPI INT340X thermal drivers

CONFIG_INTEL_PCH_THERMAL=m
# end of Intel thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
CONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
CONFIG_IR_SIR=m
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_IR_TOY is not set
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types

#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# end of Video4Linux options

#
# Media controller options
#
# CONFIG_MEDIA_CONTROLLER_DVB is not set
# end of Media controller options

#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set

#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# end of Media drivers

#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips

#
# Camera sensor devices
#
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_SMIAPP is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# end of Camera sensor devices

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices

#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
# end of SPI helper chips

#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_CXD2880=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers

#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_DMA_PAGE_POOL=y
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_I915_GVT_KVMGT=m
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
# CONFIG_INFINIBAND_MTHCA is not set
# CONFIG_INFINIBAND_EFA is not set
# CONFIG_INFINIBAND_I40IW is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
# CONFIG_INFINIBAND_BNXT_RE is not set
# CONFIG_INFINIBAND_RDMAVT is not set
CONFIG_RDMA_RXE=m
CONFIG_RDMA_SIW=m
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_SRPT=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_ISERT is not set
# CONFIG_INFINIBAND_RTRS_CLIENT is not set
# CONFIG_INFINIBAND_RTRS_SERVER is not set
# CONFIG_INFINIBAND_OPA_VNIC is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
CONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XEN_BACKEND is not set
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
# end of Xen driver support

# CONFIG_GREYBUS is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_HUAWEI_WMI is not set
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_XIAOMI_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
CONFIG_DCDBAS=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
# CONFIG_DELL_SMBIOS_SMM is not set
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_RBTN=m
CONFIG_DELL_RBU=m
CONFIG_DELL_SMO8800=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_AIO=m
CONFIG_DELL_WMI_LED=m
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_ATOMISP2_PM is not set
CONFIG_INTEL_HID_EVENT=m
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_INTEL_OAKTRAIL=m
CONFIG_INTEL_VBTN=m
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
CONFIG_INTEL_PMC_CORE=m
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
CONFIG_PMC_ATOM=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
# CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON is not set
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID is not set
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_DEV_DAX_PMEM_COMPAT=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y

#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_INFINIBAND is not set
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_APPARMOR_KUNIT_TEST is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_DES3_EDE_X86_64=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=y
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=y
# CONFIG_KUNIT_DEBUGFS is not set
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
# CONFIG_KUNIT_ALL_TESTS is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_FUNCTION is not set
# CONFIG_FAIL_MMC_REQUEST is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
CONFIG_SYSCTL_KUNIT_TEST=m
CONFIG_LIST_KUNIT_TEST=m
# CONFIG_LINEAR_RANGES_TEST is not set
# CONFIG_BITS_TEST is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FPU is not set
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 5573 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='hwsim'
	export testcase='hwsim'
	export category='functional'
	export need_memory='1G'
	export job_origin='/lkp-src/allot/cyclic:p1:linux-devel:devel-hourly/lkp-ivb-d01/hwsim-part2.yaml'
	export queue_cmdline_keys='branch
commit
queue_at_least_once'
	export queue='validate'
	export testbox='lkp-ivb-d01'
	export tbox_group='lkp-ivb-d01'
	export kconfig='x86_64-rhel-8.3'
	export submit_id='5f53cdfde6832c360249a875'
	export job_file='/lkp/jobs/scheduled/lkp-ivb-d01/hwsim-hwsim-19-ucode=0x21-debian-10.4-x86_64-20200603.cgz-8cafe19852d95d6494cbd8c1ae24dbd621588a91-20200906-13826-pg1gh9-2.yaml'
	export id='1f9325fb55c245d27267c88f1865800056d9c357'
	export queuer_version='/lkp-src'
	export model='Ivy Bridge'
	export nr_node=1
	export nr_cpu=8
	export memory='16G'
	export nr_ssd_partitions=1
	export nr_hdd_partitions=1
	export ssd_partitions='/dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV634503HY400NGN-part1'
	export hdd_partitions='/dev/disk/by-id/ata-ST1000DM003-1CH162_Z1DARXSK-part2'
	export rootfs_partition='/dev/disk/by-id/ata-ST1000DM003-1CH162_Z1DARXSK-part1'
	export brand='Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz'
	export need_kconfig='CONFIG_WLAN=y
CONFIG_CFG80211=m
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HWSIM=m
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_VETH=m'
	export commit='8cafe19852d95d6494cbd8c1ae24dbd621588a91'
	export netconsole_port=6672
	export ucode='0x21'
	export need_kconfig_hw='CONFIG_IGB=y
CONFIG_E1000E=y
CONFIG_SATA_AHCI'
	export enqueue_time='2020-09-06 01:42:21 +0800'
	export _id='5f53cdfde6832c360249a875'
	export _rt='/result/hwsim/hwsim-19-ucode=0x21/lkp-ivb-d01/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91'
	export user='lkp'
	export compiler='gcc-9'
	export head_commit='71dd0f546830b608fb89762b0904e49896223650'
	export base_commit='f75aef392f869018f78cfedf3c320a6b3fcfda6b'
	export branch='linux-review/Thomas-Pedersen/add-support-for-S1G-association/20200901-045826'
	export rootfs='debian-10.4-x86_64-20200603.cgz'
	export result_root='/result/hwsim/hwsim-19-ucode=0x21/lkp-ivb-d01/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/3'
	export scheduler_version='/lkp/lkp/.src-20200904-151623'
	export LKP_SERVER='inn'
	export arch='x86_64'
	export max_uptime=3600
	export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/lkp-ivb-d01/hwsim-hwsim-19-ucode=0x21-debian-10.4-x86_64-20200603.cgz-8cafe19852d95d6494cbd8c1ae24dbd621588a91-20200906-13826-pg1gh9-2.yaml
ARCH=x86_64
kconfig=x86_64-rhel-8.3
branch=linux-review/Thomas-Pedersen/add-support-for-S1G-association/20200901-045826
commit=8cafe19852d95d6494cbd8c1ae24dbd621588a91
BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/vmlinuz-5.9.0-rc1-00605-g8cafe19852d95d
max_uptime=3600
RESULT_ROOT=/result/hwsim/hwsim-19-ucode=0x21/lkp-ivb-d01/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/3
LKP_SERVER=inn
nokaslr
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/modules.cgz'
	export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20200709.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hwsim_20200619.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/hwsim-x86_64-6eb6cf0-1_20200619.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz'
	export ucode_initrd='/osimage/ucode/intel-ucode-20200610.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export last_kernel='5.9.0-rc3'
	export repeat_to=4
	export schedule_notify_address=
	export queue_at_least_once=1
	export kernel='/pkg/linux/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/vmlinuz-5.9.0-rc1-00605-g8cafe19852d95d'
	export dequeue_time='2020-09-06 01:46:31 +0800'
	export job_initrd='/lkp/jobs/scheduled/lkp-ivb-d01/hwsim-hwsim-19-ucode=0x21-debian-10.4-x86_64-20200603.cgz-8cafe19852d95d6494cbd8c1ae24dbd621588a91-20200906-13826-pg1gh9-2.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test group='hwsim-19' $LKP_SRC/tests/wrapper hwsim
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper hwsim
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time hwsim.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: kmsg.xz --]
[-- Type: application/x-xz, Size: 139556 bytes --]

[-- Attachment #5: hwsim --]
[-- Type: text/plain, Size: 54918 bytes --]

2020-09-05 17:47:07 export USER=root
2020-09-05 17:47:07 ./build.sh
Building TNC testing tools
Building wlantest
Building hs20-osu-client
Building hostapd
Building wpa_supplicant
wpa_cli.c: In function ‘wpa_cli_cmd_all_bss’:
wpa_cli.c:3105:3: warning: ‘ssid’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wpa_cli.c:3064:55: note: ‘ssid’ was declared here
  char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid;
                                                       ^~~~
wpa_cli.c:3105:3: warning: ‘flags’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wpa_cli.c:3064:47: note: ‘flags’ was declared here
  char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid;
                                               ^~~~~
wpa_cli.c:3105:3: warning: ‘level’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wpa_cli.c:3064:39: note: ‘level’ was declared here
  char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid;
                                       ^~~~~
wpa_cli.c:3105:3: warning: ‘freq’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wpa_cli.c:3064:32: note: ‘freq’ was declared here
  char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid;
                                ^~~~
wpa_cli.c:3105:3: warning: ‘bssid’ may be used uninitialized in this function [-Wmaybe-uninitialized]
   printf("%s\t%s\t%s\t%s\t%s\n", bssid, freq, level, flags, ssid);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wpa_cli.c:3064:24: note: ‘bssid’ was declared here
  char buf[512], *pos, *bssid, *freq, *level, *flags, *ssid;
                        ^~~~~
2020-09-05 17:47:39 ./start.sh
2020-09-05 17:47:40 	./run-tests.py erp_radius 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START erp_radius 1/1
Test: ERP enabled on RADIUS server and peer
Starting AP as-erp
Starting AP wlan3
Connect STA wlan0 to AP
PASS erp_radius 0.329997 2020-09-05 17:47:41.946356
passed all 1 test case(s)
2020-09-05 17:47:41 	./run-tests.py erp_radius_eap_methods 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START erp_radius_eap_methods 1/1
Test: ERP enabled on RADIUS server and peer
Starting AP as-erp
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
Connect STA wlan0 to AP
PASS erp_radius_eap_methods 2.097134 2020-09-05 17:47:44.177751
passed all 1 test case(s)
2020-09-05 17:47:44 	./run-tests.py erp_radius_eap_tls_v13 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START erp_radius_eap_tls_v13 1/1
Test: ERP enabled on RADIUS server and peer using EAP-TLS v1.3
Starting AP as-erp
Starting AP wlan3
Connect STA wlan0 to AP
PASS erp_radius_eap_tls_v13 0.226891 2020-09-05 17:47:44.528522
passed all 1 test case(s)
2020-09-05 17:47:44 	./run-tests.py erp_radius_ext 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START erp_radius_ext 1/1
Test: ERP enabled on a separate RADIUS server and peer
Starting AP wlan3
Connect STA wlan0 to AP
PASS erp_radius_ext 0.306549 2020-09-05 17:47:44.967670
passed all 1 test case(s)
2020-09-05 17:47:44 	./run-tests.py erp_radius_no_wildcard_user 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START erp_radius_no_wildcard_user 1/1
Test: ERP enabled on RADIUS server and peer and no wildcard user
Starting AP as-erp
Starting AP wlan3
Connect STA wlan0 to AP
PASS erp_radius_no_wildcard_user 0.303199 2020-09-05 17:47:45.405114
passed all 1 test case(s)
2020-09-05 17:47:45 	./run-tests.py erp_server_no_match 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START erp_server_no_match 1/1
Test: ERP enabled on server and peer, but server has no key match
Starting AP wlan3
Connect STA wlan0 to AP
PASS erp_server_no_match 0.255558 2020-09-05 17:47:45.787689
passed all 1 test case(s)
2020-09-05 17:47:45 	./run-tests.py ext_password_eap 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ext_password_eap 1/1
Test: External password storage for EAP password
Starting AP wlan3
Connect STA wlan0 to AP
PASS ext_password_eap 0.178059 2020-09-05 17:47:46.098978
passed all 1 test case(s)
2020-09-05 17:47:46 	./run-tests.py ext_password_interworking 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ext_password_interworking 1/1
Test: External password storage for Interworking network selection
Starting AP wlan3
PASS ext_password_interworking 0.225177 2020-09-05 17:47:46.449353
passed all 1 test case(s)
2020-09-05 17:47:46 	./run-tests.py ext_password_psk 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ext_password_psk 1/1
Test: External password storage for PSK
Starting AP wlan3
Connect STA wlan0 to AP
PASS ext_password_psk 0.181825 2020-09-05 17:47:46.756949
passed all 1 test case(s)
2020-09-05 17:47:46 	./run-tests.py ext_password_psk_not_found 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ext_password_psk_not_found 1/1
Test: External password storage for PSK and PSK not found
Starting AP wlan3
Connect STA wlan0 to AP
Connect STA wlan1 to AP
Connect STA wlan2 to AP
Connect STA wlan5 to AP
PASS ext_password_psk_not_found 1.471326 2020-09-05 17:47:48.353711
passed all 1 test case(s)
2020-09-05 17:47:48 	./run-tests.py ext_radio_work 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ext_radio_work 1/1
Test: External radio work item
PASS ext_radio_work 1.032866 2020-09-05 17:47:49.520009
passed all 1 test case(s)
2020-09-05 17:47:49 	./run-tests.py ext_radio_work_disconnect_connect 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START ext_radio_work_disconnect_connect 1/1
Test: External radio work and DISCONNECT clearing connection attempt
Starting AP wlan3
Connect STA wlan0 to AP
PASS ext_radio_work_disconnect_connect 0.626523 2020-09-05 17:47:50.276579
passed all 1 test case(s)
2020-09-05 17:47:50 	./run-tests.py fils_and_ft 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_and_ft 1/1
Test: FILS SK using ERP and FT initial mobility domain association
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Starting AP wlan4 (old add_ap argument type)
PASS fils_and_ft 0.644678 2020-09-05 17:47:51.050109
passed all 1 test case(s)
2020-09-05 17:47:51 	./run-tests.py fils_and_ft_over_air 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_and_ft_over_air 1/1
Test: FILS SK using ERP and FT-over-air (SHA256)
Starting AP as-erp
Set up ERP key hierarchy without FILS/FT authentication
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Initial mobility domain association using FILS authentication
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
FT protocol using FT key hierarchy established during FILS authentication
FT protocol using the previously established FT key hierarchy from FILS authentication
PASS fils_and_ft_over_air 0.989455 2020-09-05 17:47:52.166366
passed all 1 test case(s)
2020-09-05 17:47:52 	./run-tests.py fils_and_ft_over_air_sha384 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_and_ft_over_air_sha384 1/1
Test: FILS SK using ERP and FT-over-air (SHA384)
Starting AP as-erp
Set up ERP key hierarchy without FILS/FT authentication
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Initial mobility domain association using FILS authentication
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
FT protocol using FT key hierarchy established during FILS authentication
FT protocol using the previously established FT key hierarchy from FILS authentication
PASS fils_and_ft_over_air_sha384 0.972827 2020-09-05 17:47:53.267643
passed all 1 test case(s)
2020-09-05 17:47:53 	./run-tests.py fils_and_ft_over_ds 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_and_ft_over_ds 1/1
Test: FILS SK using ERP and FT-over-DS (SHA256)
Starting AP as-erp
Set up ERP key hierarchy without FILS/FT authentication
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Initial mobility domain association using FILS authentication
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
FT protocol using FT key hierarchy established during FILS authentication
FT protocol using the previously established FT key hierarchy from FILS authentication
PASS fils_and_ft_over_ds 0.822279 2020-09-05 17:47:54.215438
passed all 1 test case(s)
2020-09-05 17:47:54 	./run-tests.py fils_and_ft_over_ds_sha384 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_and_ft_over_ds_sha384 1/1
Test: FILS SK using ERP and FT-over-DS (SHA384)
Starting AP as-erp
Set up ERP key hierarchy without FILS/FT authentication
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Initial mobility domain association using FILS authentication
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
FT protocol using FT key hierarchy established during FILS authentication
FT protocol using the previously established FT key hierarchy from FILS authentication
PASS fils_and_ft_over_ds_sha384 0.82017 2020-09-05 17:47:55.162694
passed all 1 test case(s)
2020-09-05 17:47:55 	./run-tests.py fils_assoc_replay 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_assoc_replay 1/1
Test: FILS AP and replayed Association Request frame
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Replay the last Association Request frame
CCMP PN: ['0x000000000001', '0x000000000002']
PASS fils_assoc_replay 0.555065 2020-09-05 17:47:55.844474
passed all 1 test case(s)
2020-09-05 17:47:55 	./run-tests.py fils_auth_gtk_rekey 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_auth_gtk_rekey 1/1
Test: GTK rekeying after FILS authentication
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_auth_gtk_rekey 6.16846 2020-09-05 17:48:02.139194
passed all 1 test case(s)
2020-09-05 17:48:02 	./run-tests.py fils_auth_ptk_rekey_ap 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_auth_ptk_rekey_ap 1/1
Test: PTK rekeying after FILS authentication triggered by AP
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_auth_ptk_rekey_ap 3.287504 2020-09-05 17:48:05.551900
passed all 1 test case(s)
2020-09-05 17:48:05 	./run-tests.py fils_auth_ptk_rekey_ap_erp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_auth_ptk_rekey_ap_erp 1/1
Test: PTK rekeying after FILS authentication triggered by AP (ERP)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_auth_ptk_rekey_ap_erp 3.279754 2020-09-05 17:48:08.961814
passed all 1 test case(s)
2020-09-05 17:48:08 	./run-tests.py fils_auth_ptk_rekey_ap_ext_key_id 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_auth_ptk_rekey_ap_ext_key_id 1/1
Test: PTK rekeying after FILS authentication triggered by AP (Ext Key ID)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_auth_ptk_rekey_ap_ext_key_id 3.292189 2020-09-05 17:48:12.382363
passed all 1 test case(s)
2020-09-05 17:48:12 	./run-tests.py fils_sk_auth_mismatch 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_auth_mismatch 1/1
Test: FILS SK authentication type mismatch (PFS not supported)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_auth_mismatch 0.260858 2020-09-05 17:48:12.773062
passed all 1 test case(s)
2020-09-05 17:48:12 	./run-tests.py fils_sk_erp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp 1/1
Test: FILS SK using ERP
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp 0.256124 2020-09-05 17:48:13.156924
passed all 1 test case(s)
2020-09-05 17:48:13 	./run-tests.py fils_sk_erp_and_reauth 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_and_reauth 1/1
Test: FILS SK using ERP and AP going away
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_and_reauth 1.163553 2020-09-05 17:48:14.446544
passed all 1 test case(s)
2020-09-05 17:48:14 	./run-tests.py fils_sk_erp_another_ssid 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_another_ssid 1/1
Test: FILS SK using ERP and roam to another SSID
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_another_ssid 0.427981 2020-09-05 17:48:15.001464
passed all 1 test case(s)
2020-09-05 17:48:15 	./run-tests.py fils_sk_erp_followed_by_pmksa_caching 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_followed_by_pmksa_caching 1/1
Test: FILS SK ERP following by PMKSA caching
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_followed_by_pmksa_caching 0.335439 2020-09-05 17:48:15.463863
passed all 1 test case(s)
2020-09-05 17:48:15 	./run-tests.py fils_sk_erp_radius_ext 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_radius_ext 1/1
Test: FILS SK using ERP and external RADIUS server
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_radius_ext 0.262808 2020-09-05 17:48:15.852856
passed all 1 test case(s)
2020-09-05 17:48:15 	./run-tests.py fils_sk_erp_radius_roam 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_radius_roam 1/1
Test: FILS SK/ERP and roaming with different AKM
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Starting AP wlan4 (old add_ap argument type)
PASS fils_sk_erp_radius_roam 0.358209 2020-09-05 17:48:16.339134
passed all 1 test case(s)
2020-09-05 17:48:16 	./run-tests.py fils_sk_erp_roam_diff_akm 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_roam_diff_akm 1/1
Test: FILS SK using ERP and SHA256/SHA384 change in roam
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Starting AP wlan4 (old add_ap argument type)
PASS fils_sk_erp_roam_diff_akm 0.394077 2020-09-05 17:48:16.860399
passed all 1 test case(s)
2020-09-05 17:48:16 	./run-tests.py fils_sk_erp_server_flush 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_server_flush 1/1
Test: FILS SK ERP and ERP flush on server, but not on peer
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_server_flush 0.444374 2020-09-05 17:48:17.433493
passed all 1 test case(s)
2020-09-05 17:48:17 	./run-tests.py fils_sk_erp_sha384 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_sha384 1/1
Test: FILS SK using ERP and SHA384
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_sha384 0.247771 2020-09-05 17:48:17.809901
passed all 1 test case(s)
2020-09-05 17:48:17 	./run-tests.py fils_sk_erp_sim 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_erp_sim 1/1
Test: FILS SK using ERP with SIM
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_erp_sim 0.369071 2020-09-05 17:48:18.305696
passed all 1 test case(s)
2020-09-05 17:48:18 	./run-tests.py fils_sk_full_auth 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_full_auth 1/1
Test: FILS SK full authentication
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_full_auth 1.124876 2020-09-05 17:48:19.558044
passed all 1 test case(s)
2020-09-05 17:48:19 	./run-tests.py fils_sk_hlp 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_hlp 1/1
Test: FILS SK HLP (rapid commit server)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_hlp 0.218725 2020-09-05 17:48:19.903387
passed all 1 test case(s)
2020-09-05 17:48:19 	./run-tests.py fils_sk_hlp_dhcp_parsing 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_hlp_dhcp_parsing 1/1
Test: FILS SK HLP and DHCP response parsing
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_hlp_dhcp_parsing 0.61193 2020-09-05 17:48:20.642812
passed all 1 test case(s)
2020-09-05 17:48:20 	./run-tests.py fils_sk_hlp_no_rapid_commit 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_hlp_no_rapid_commit 1/1
Test: FILS SK HLP (no rapid commit server)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_hlp_no_rapid_commit 0.228353 2020-09-05 17:48:20.998537
passed all 1 test case(s)
2020-09-05 17:48:21 	./run-tests.py fils_sk_hlp_oom 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_hlp_oom 1/1
Test: FILS SK HLP and hostapd OOM
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_hlp_oom 1.450655 2020-09-05 17:48:22.576104
passed all 1 test case(s)
2020-09-05 17:48:22 	./run-tests.py fils_sk_hlp_req_parsing 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_hlp_req_parsing 1/1
Test: FILS SK HLP request parsing
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_hlp_req_parsing 0.421439 2020-09-05 17:48:23.126486
passed all 1 test case(s)
2020-09-05 17:48:23 	./run-tests.py fils_sk_hlp_timeout 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_hlp_timeout 1/1
Test: FILS SK HLP (rapid commit server timeout)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_hlp_timeout 0.249688 2020-09-05 17:48:23.504563
passed all 1 test case(s)
2020-09-05 17:48:23 	./run-tests.py fils_sk_multiple_realms 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_multiple_realms 1/1
Test: FILS SK and multiple realms
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_multiple_realms 0.251568 2020-09-05 17:48:23.883712
passed all 1 test case(s)
2020-09-05 17:48:23 	./run-tests.py fils_sk_pfs_19 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_19 1/1
Test: FILS SK with PFS (DH group 19)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_19 0.258762 2020-09-05 17:48:24.266595
passed all 1 test case(s)
2020-09-05 17:48:24 	./run-tests.py fils_sk_pfs_20 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_20 1/1
Test: FILS SK with PFS (DH group 20)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_20 0.260736 2020-09-05 17:48:24.652748
passed all 1 test case(s)
2020-09-05 17:48:24 	./run-tests.py fils_sk_pfs_21 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_21 1/1
Test: FILS SK with PFS (DH group 21)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_21 0.252189 2020-09-05 17:48:25.035392
passed all 1 test case(s)
2020-09-05 17:48:25 	./run-tests.py fils_sk_pfs_25 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_25 1/1
Test: FILS SK with PFS (DH group 25)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_25 0.254092 2020-09-05 17:48:25.416341
passed all 1 test case(s)
2020-09-05 17:48:25 	./run-tests.py fils_sk_pfs_26 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_26 1/1
Test: FILS SK with PFS (DH group 26)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_26 0.254236 2020-09-05 17:48:25.799252
passed all 1 test case(s)
2020-09-05 17:48:25 	./run-tests.py fils_sk_pfs_27 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_27 1/1
Test: FILS SK with PFS (DH group 27)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_27 0.257445 2020-09-05 17:48:26.183904
passed all 1 test case(s)
2020-09-05 17:48:26 	./run-tests.py fils_sk_pfs_28 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_28 1/1
Test: FILS SK with PFS (DH group 28)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_28 0.251965 2020-09-05 17:48:26.562035
passed all 1 test case(s)
2020-09-05 17:48:26 	./run-tests.py fils_sk_pfs_29 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_29 1/1
Test: FILS SK with PFS (DH group 29)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_29 0.253943 2020-09-05 17:48:26.942733
passed all 1 test case(s)
2020-09-05 17:48:26 	./run-tests.py fils_sk_pfs_30 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_30 1/1
Test: FILS SK with PFS (DH group 30)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_30 0.261886 2020-09-05 17:48:27.330703
passed all 1 test case(s)
2020-09-05 17:48:27 	./run-tests.py fils_sk_pfs_group_mismatch 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_group_mismatch 1/1
Test: FILS SK PFS DH group mismatch
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_group_mismatch 0.191941 2020-09-05 17:48:27.650144
passed all 1 test case(s)
2020-09-05 17:48:27 	./run-tests.py fils_sk_pfs_pmksa_caching 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pfs_pmksa_caching 1/1
Test: FILS SK with PFS and PMKSA caching
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pfs_pmksa_caching 0.557531 2020-09-05 17:48:28.335665
passed all 1 test case(s)
2020-09-05 17:48:28 	./run-tests.py fils_sk_pmksa_caching 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pmksa_caching 1/1
Test: FILS SK and PMKSA caching
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pmksa_caching 0.394334 2020-09-05 17:48:28.859057
passed all 1 test case(s)
2020-09-05 17:48:28 	./run-tests.py fils_sk_pmksa_caching_and_cache_id 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pmksa_caching_and_cache_id 1/1
Test: FILS SK and PMKSA caching with Cache Identifier
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
Starting AP wlan4 (old add_ap argument type)
PASS fils_sk_pmksa_caching_and_cache_id 0.34933 2020-09-05 17:48:29.335304
passed all 1 test case(s)
2020-09-05 17:48:29 	./run-tests.py fils_sk_pmksa_caching_ctrl_ext 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pmksa_caching_ctrl_ext 1/1
Test: FILS SK and PMKSA caching with Cache Identifier and external management
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PMKSA_GET: 02:00:00:00:03:00 f3e97ce314bfdaab7b2a99ae670d3ba3 fe28a08b9c5d452324b7f709304c3db610184f87c7f639d240e22205c6a91c6c731af57f83857567bce7cfbfbf43f247 30240 43200 524288 0 ffee

Starting AP wlan4 (old add_ap argument type)
PASS fils_sk_pmksa_caching_ctrl_ext 0.349991 2020-09-05 17:48:29.811728
passed all 1 test case(s)
2020-09-05 17:48:29 	./run-tests.py fils_sk_pmksa_caching_ocv 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_pmksa_caching_ocv 1/1
Test: FILS SK and PMKSA caching with OCV
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_pmksa_caching_ocv 0.400128 2020-09-05 17:48:30.339289
passed all 1 test case(s)
2020-09-05 17:48:30 	./run-tests.py fils_sk_sha384_full_auth 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fils_sk_sha384_full_auth 1/1
Test: FILS SK full authentication (SHA384)
Starting AP as-erp
Starting AP wlan3 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fils_sk_sha384_full_auth 1.126309 2020-09-05 17:48:31.592695
passed all 1 test case(s)
2020-09-05 17:48:31 	./run-tests.py fst_ack_response_proto 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ack_response_proto 1/1
Test: FST protocol testing for Ack Response
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
PASS fst_ack_response_proto 0.50124 2020-09-05 17:48:32.222509
passed all 1 test case(s)
2020-09-05 17:48:32 	./run-tests.py fst_ap_ack_request_with_bad_fsts_id 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_request_with_bad_fsts_id 1/1
Test: FST AP ack request with bad fsts id
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack request received with bad fsts_id)
PASS fst_ap_ack_request_with_bad_fsts_id 5.466184 2020-09-05 17:48:37.816126
passed all 1 test case(s)
2020-09-05 17:48:37 	./run-tests.py fst_ap_ack_request_with_no_session 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_request_with_no_session 1/1
Test: FST AP ack request with no session
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Frame was ignored (Ack request)
PASS fst_ap_ack_request_with_no_session 5.464473 2020-09-05 17:48:43.407063
passed all 1 test case(s)
2020-09-05 17:48:43 	./run-tests.py fst_ap_ack_request_with_session_not_established_init_side 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_request_with_session_not_established_init_side 1/1
Test: FST AP ack request with session not established init side
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack request received on the initiator side before session was established)
PASS fst_ap_ack_request_with_session_not_established_init_side 5.994046 2020-09-05 17:48:49.526960
passed all 1 test case(s)
2020-09-05 17:48:49 	./run-tests.py fst_ap_ack_request_with_session_not_established_resp_side 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_request_with_session_not_established_resp_side 1/1
Test: FST AP ack request with session not established resp side
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack request received on the responder side before session was established)
PASS fst_ap_ack_request_with_session_not_established_resp_side 5.995709 2020-09-05 17:48:55.649141
passed all 1 test case(s)
2020-09-05 17:48:55 	./run-tests.py fst_ap_ack_request_with_session_not_set_up 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_request_with_session_not_set_up 1/1
Test: FST AP ack request with session not set up
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack request received before the session was set up)
PASS fst_ap_ack_request_with_session_not_set_up 5.469281 2020-09-05 17:49:01.246949
passed all 1 test case(s)
2020-09-05 17:49:01 	./run-tests.py fst_ap_ack_response_with_no_ack_request 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_response_with_no_ack_request 1/1
Test: FST AP ack response with no ack request
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack response received before ack request was sent)
PASS fst_ap_ack_response_with_no_ack_request 5.476693 2020-09-05 17:49:06.850654
passed all 1 test case(s)
2020-09-05 17:49:06 	./run-tests.py fst_ap_ack_response_with_no_session 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_response_with_no_session 1/1
Test: FST AP ack response with no session
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Frame was ignored (Ack response)
PASS fst_ap_ack_response_with_no_session 5.475787 2020-09-05 17:49:12.450784
passed all 1 test case(s)
2020-09-05 17:49:12 	./run-tests.py fst_ap_ack_response_with_session_not_established_init_side 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_response_with_session_not_established_init_side 1/1
Test: FST AP ack response with session not established init side
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack response received on the initiator side before session was established)
PASS fst_ap_ack_response_with_session_not_established_init_side 5.996441 2020-09-05 17:49:18.574917
passed all 1 test case(s)
2020-09-05 17:49:18 	./run-tests.py fst_ap_ack_response_with_session_not_established_resp_side 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_response_with_session_not_established_resp_side 1/1
Test: FST AP ack response with session not established resp side
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack response received on the responder side before session was established)
PASS fst_ap_ack_response_with_session_not_established_resp_side 5.999277 2020-09-05 17:49:24.701151
passed all 1 test case(s)
2020-09-05 17:49:24 	./run-tests.py fst_ap_ack_response_with_session_not_set_up 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ack_response_with_session_not_set_up 1/1
Test: FST AP ack response with session not set up
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad scenario was handled correctly (Ack response received before the session was set up)
PASS fst_ap_ack_response_with_session_not_set_up 5.473749 2020-09-05 17:49:30.299973
passed all 1 test case(s)
2020-09-05 17:49:30 	./run-tests.py fst_ap_config_default 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_default 1/1
Test: FST AP configuration default parameters
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
hostapd didn't start with valid config parameters
Traceback (most recent call last):
  File "./run-tests.py", line 531, in main
    t(dev, apdev, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_config.py", line 406, in test_fst_ap_config_default
    raise Exception("hostapd didn't start with valid config parameters")
Exception: hostapd didn't start with valid config parameters
FAIL fst_ap_config_default 1.201026 2020-09-05 17:49:31.626224
passed 0 test case(s)
skipped 0 test case(s)
failed tests: fst_ap_config_default
2020-09-05 17:49:31 	./run-tests.py fst_ap_config_good 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_good 1/1
Test: FST AP configuration good parameters
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
hostapd didn't start with valid config parameters
Traceback (most recent call last):
  File "./run-tests.py", line 531, in main
    t(dev, apdev, params)
  File "/lkp/benchmarks/hwsim/tests/hwsim/test_fst_config.py", line 400, in test_fst_ap_config_good
    raise Exception("hostapd didn't start with valid config parameters")
Exception: hostapd didn't start with valid config parameters
FAIL fst_ap_config_good 1.214574 2020-09-05 17:49:32.968016
passed 0 test case(s)
skipped 0 test case(s)
failed tests: fst_ap_config_good
2020-09-05 17:49:32 	./run-tests.py fst_ap_config_group_len 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_group_len 1/1
Test: FST AP configuration Group max length
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_group_len 1.038532 2020-09-05 17:49:34.143336
passed all 1 test case(s)
2020-09-05 17:49:34 	./run-tests.py fst_ap_config_llt_nan 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_llt_nan 1/1
Test: FST AP configuration LLT is not a number
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_llt_nan 1.037366 2020-09-05 17:49:35.306875
passed all 1 test case(s)
2020-09-05 17:49:35 	./run-tests.py fst_ap_config_llt_neg 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_llt_neg 1/1
Test: FST AP configuration negative LLT
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_llt_neg 1.039218 2020-09-05 17:49:36.472550
passed all 1 test case(s)
2020-09-05 17:49:36 	./run-tests.py fst_ap_config_llt_too_big 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_llt_too_big 1/1
Test: FST AP configuration LLT is too big
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_llt_too_big 1.036907 2020-09-05 17:49:37.637726
passed all 1 test case(s)
2020-09-05 17:49:37 	./run-tests.py fst_ap_config_llt_zero 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_llt_zero 1/1
Test: FST AP configuration zero LLT
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_llt_zero 1.038161 2020-09-05 17:49:38.802893
passed all 1 test case(s)
2020-09-05 17:49:38 	./run-tests.py fst_ap_config_oom 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_oom 1/1
Test: FST AP configuration and OOM
Starting AP wlan3 (old add_ap argument type)
PASS fst_ap_config_oom 0.103994 2020-09-05 17:49:39.033615
passed all 1 test case(s)
2020-09-05 17:49:39 	./run-tests.py fst_ap_config_pri_large 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_pri_large 1/1
Test: FST AP configuration Priority too large
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_pri_large 1.038533 2020-09-05 17:49:40.196485
passed all 1 test case(s)
2020-09-05 17:49:40 	./run-tests.py fst_ap_config_pri_nan 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_pri_nan 1/1
Test: FST AP configuration Priority not a number
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_pri_nan 1.03777 2020-09-05 17:49:41.359994
passed all 1 test case(s)
2020-09-05 17:49:41 	./run-tests.py fst_ap_config_pri_neg 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_pri_neg 1/1
Test: FST AP configuration Priority negative
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_pri_neg 1.037882 2020-09-05 17:49:42.523844
passed all 1 test case(s)
2020-09-05 17:49:42 	./run-tests.py fst_ap_config_pri_zero 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_config_pri_zero 1/1
Test: FST AP configuration Priority zero
kill_pid: pidfile logs/current/myhostapd.pid does not exist - try again after a second
kill_pid: pidfile logs/current/myhostapd.pid does not exist - could not kill the process
PASS fst_ap_config_pri_zero 1.037601 2020-09-05 17:49:43.687593
passed all 1 test case(s)
2020-09-05 17:49:43 	./run-tests.py fst_ap_connect_to_fst_sta 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_connect_to_fst_sta 1/1
Test: FST AP connecting to FST STA
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
PASS fst_ap_connect_to_fst_sta 2.391988 2020-09-05 17:49:46.205204
passed all 1 test case(s)
2020-09-05 17:49:46 	./run-tests.py fst_ap_connect_to_non_fst_sta 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_connect_to_non_fst_sta 1/1
Test: FST AP connecting to non-FST STA
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan0 to AP
PASS fst_ap_connect_to_non_fst_sta 2.383183 2020-09-05 17:49:48.716235
passed all 1 test case(s)
2020-09-05 17:49:48 	./run-tests.py fst_ap_ctrl_iface 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_ctrl_iface 1/1
Test: FST control interface behavior
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Initial session params:
{'old_peer_addr': '00:00:00:00:00:00', 'new_peer_addr': '00:00:00:00:00:00', 'new_ifname': 'NONE', 'old_ifname': 'NONE', 'llt': '50', 'state': 'INITIAL'}
Session params after configuration:
{'old_peer_addr': '02:00:00:00:05:00', 'new_peer_addr': '02:00:00:00:05:00', 'new_ifname': 'wlan4', 'old_ifname': 'wlan3', 'llt': '100', 'state': 'INITIAL'}
Interface peers: ['02:00:00:00:05:00']
Peer MB IEs: 9e1c0c0200000000000000000000000000000000000000ff0200000006009e1c0c0400000000000000000000000000000000000000ff020000000600
Interfaces: [{'name': 'wlan4|02', 'priority': '00', 'llt': '00'}, {'name': 'wlan3|02', 'priority': '00', 'llt': '00'}]
Groups: ['fstg0']
PASS fst_ap_ctrl_iface 0.493596 2020-09-05 17:49:49.334749
passed all 1 test case(s)
2020-09-05 17:49:49 	./run-tests.py fst_ap_initiate_session 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session 1/1
Test: FST AP initiate session
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Session initiated
PASS fst_ap_initiate_session 0.471228 2020-09-05 17:49:49.934006
passed all 1 test case(s)
2020-09-05 17:49:49 	./run-tests.py fst_ap_initiate_session_bad_peer_addr 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_bad_peer_addr 1/1
Test: FST AP initiate session - bad peer address
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Peer address)
PASS fst_ap_initiate_session_bad_peer_addr 0.464581 2020-09-05 17:49:50.523738
passed all 1 test case(s)
2020-09-05 17:49:50 	./run-tests.py fst_ap_initiate_session_concurrent_setup_request 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_concurrent_setup_request 1/1
Test: FST AP initiate session - concurrent setup request
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Concurrent setup request)
PASS fst_ap_initiate_session_concurrent_setup_request 0.471483 2020-09-05 17:49:51.122013
passed all 1 test case(s)
2020-09-05 17:49:51 	./run-tests.py fst_ap_initiate_session_invalid_session_id 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_invalid_session_id 1/1
Test: FST AP initiate session - invalid session id
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Session ID)
PASS fst_ap_initiate_session_invalid_session_id 0.464742 2020-09-05 17:49:51.713557
passed all 1 test case(s)
2020-09-05 17:49:51 	./run-tests.py fst_ap_initiate_session_no_new_iface 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_no_new_iface 1/1
Test: FST AP initiate session - no new iface
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (No new_iface was set)
PASS fst_ap_initiate_session_no_new_iface 0.470638 2020-09-05 17:49:52.310531
passed all 1 test case(s)
2020-09-05 17:49:52 	./run-tests.py fst_ap_initiate_session_no_params 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_no_params 1/1
Test: FST AP initiate session - no params
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (No params passed to session initiate)
PASS fst_ap_initiate_session_no_params 0.46722 2020-09-05 17:49:52.905798
passed all 1 test case(s)
2020-09-05 17:49:52 	./run-tests.py fst_ap_initiate_session_request_with_bad_stie 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_request_with_bad_stie 1/1
Test: FST AP initiate session - request with bad stie
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Request with bad st ie)
PASS fst_ap_initiate_session_request_with_bad_stie 5.463311 2020-09-05 17:49:58.495852
passed all 1 test case(s)
2020-09-05 17:49:58 	./run-tests.py fst_ap_initiate_session_response_with_bad_stie 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_response_with_bad_stie 1/1
Test: FST AP initiate session - response with bad stie
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Response with bad st ie)
PASS fst_ap_initiate_session_response_with_bad_stie 0.454826 2020-09-05 17:49:59.076748
passed all 1 test case(s)
2020-09-05 17:49:59 	./run-tests.py fst_ap_initiate_session_response_with_reject 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_response_with_reject 1/1
Test: FST AP initiate session - response with reject
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Response with reject)
PASS fst_ap_initiate_session_response_with_reject 0.468755 2020-09-05 17:49:59.672934
passed all 1 test case(s)
2020-09-05 17:49:59 	./run-tests.py fst_ap_initiate_session_response_with_zero_llt 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_response_with_zero_llt 1/1
Test: FST AP initiate session - zero llt
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (Response with zero llt)
PASS fst_ap_initiate_session_response_with_zero_llt 0.476592 2020-09-05 17:50:00.276840
passed all 1 test case(s)
2020-09-05 17:50:00 	./run-tests.py fst_ap_initiate_session_stt_no_response 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_initiate_session_stt_no_response 1/1
Test: FST AP initiate session - stt no response
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Bad parameter was detected (No response, STT)
PASS fst_ap_initiate_session_stt_no_response 0.98285 2020-09-05 17:50:01.386474
passed all 1 test case(s)
2020-09-05 17:50:01 	./run-tests.py fst_ap_remove_session_bad_session_id 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_remove_session_bad_session_id 1/1
Test: FST AP remove session - bad session id
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Remove scenario ended as expected (Bad session id)
PASS fst_ap_remove_session_bad_session_id 0.461013 2020-09-05 17:50:01.973635
passed all 1 test case(s)
2020-09-05 17:50:01 	./run-tests.py fst_ap_remove_session_established 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_remove_session_established 1/1
Test: FST AP remove session - established
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Session removed
PASS fst_ap_remove_session_established 0.46757 2020-09-05 17:50:02.566511
passed all 1 test case(s)
2020-09-05 17:50:02 	./run-tests.py fst_ap_remove_session_no_params 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_remove_session_no_params 1/1
Test: FST AP remove session - no params
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Remove scenario ended as expected (No params)
PASS fst_ap_remove_session_no_params 0.463076 2020-09-05 17:50:03.154787
passed all 1 test case(s)
2020-09-05 17:50:03 	./run-tests.py fst_ap_remove_session_not_established 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_remove_session_not_established 1/1
Test: FST AP remove session - not established
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Remove scenario ended as expected (Remove non-established session)
PASS fst_ap_remove_session_not_established 5.466371 2020-09-05 17:50:08.746932
passed all 1 test case(s)
2020-09-05 17:50:08 	./run-tests.py fst_ap_session_request_with_no_session 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_session_request_with_no_session 1/1
Test: FST AP session request with no session
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Frame received, session created
PASS fst_ap_session_request_with_no_session 0.46252 2020-09-05 17:50:09.334966
passed all 1 test case(s)
2020-09-05 17:50:09 	./run-tests.py fst_ap_session_response_accept_with_no_session 
DEV: wlan0: 02:00:00:00:00:00
DEV: wlan1: 02:00:00:00:01:00
DEV: wlan2: 02:00:00:00:02:00
APDEV: wlan3
APDEV: wlan4
START fst_ap_session_response_accept_with_no_session 1/1
Test: FST AP session response accept with no session
Starting AP wlan3 (old add_ap argument type)
Starting AP wlan4 (old add_ap argument type)
Connect STA wlan5 to AP
Connect STA wlan6 to AP
Success. Frame was ignored (Session Response)
PASS fst_ap_session_response_accept_with_no_session 5.463639 2020-09-05 17:50:14.924646
passed all 1 test case(s)
2020-09-05 17:50:14 ./stop.sh
2020-09-05 17:50:16 ./start.sh channels=4
2020-09-05 17:50:16 ./stop.sh

[-- Attachment #6: job.yaml --]
[-- Type: text/plain, Size: 4619 bytes --]

---

#! jobs/hwsim-part2.yaml
suite: hwsim
testcase: hwsim
category: functional
need_memory: 1G
hwsim:
  group: hwsim-19
job_origin: "/lkp-src/allot/cyclic:p1:linux-devel:devel-hourly/lkp-ivb-d01/hwsim-part2.yaml"

#! queue options
queue_cmdline_keys:
- branch
- commit
queue: bisect
testbox: lkp-ivb-d01
tbox_group: lkp-ivb-d01
kconfig: x86_64-rhel-8.3
submit_id: 5f53beaa913b2e23db4e5cea
job_file: "/lkp/jobs/scheduled/lkp-ivb-d01/hwsim-hwsim-19-ucode=0x21-debian-10.4-x86_64-20200603.cgz-8cafe19852d95d6494cbd8c1ae24dbd621588a91-20200906-9179-1lt4jjz-0.yaml"
id: 82a3cf94668e39339897db8968011e6f522a968d
queuer_version: "/lkp-src"

#! hosts/lkp-ivb-d01
model: Ivy Bridge
nr_node: 1
nr_cpu: 8
memory: 16G
nr_ssd_partitions: 1
nr_hdd_partitions: 1
ssd_partitions: "/dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV634503HY400NGN-part1"
hdd_partitions: "/dev/disk/by-id/ata-ST1000DM003-1CH162_Z1DARXSK-part2"
rootfs_partition: "/dev/disk/by-id/ata-ST1000DM003-1CH162_Z1DARXSK-part1"
brand: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz

#! include/category/functional
kmsg: 
heartbeat: 
meminfo: 

#! include/hwsim
need_kconfig:
- CONFIG_WLAN=y
- CONFIG_CFG80211=m
- CONFIG_CFG80211_WEXT=y
- CONFIG_MAC80211=m
- CONFIG_MAC80211_HWSIM=m
- CONFIG_MAC80211_LEDS=y
- CONFIG_MAC80211_MESH=y
- CONFIG_MAC80211_DEBUGFS=y
- CONFIG_VETH=m

#! include/queue/cyclic
commit: 8cafe19852d95d6494cbd8c1ae24dbd621588a91

#! include/testbox/lkp-ivb-d01
netconsole_port: 6672
ucode: '0x21'
need_kconfig_hw:
- CONFIG_IGB=y
- CONFIG_E1000E=y
- CONFIG_SATA_AHCI
enqueue_time: 2020-09-06 00:36:59.117001024 +08:00
_id: 5f53beaa913b2e23db4e5cea
_rt: "/result/hwsim/hwsim-19-ucode=0x21/lkp-ivb-d01/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91"

#! schedule options
user: lkp
compiler: gcc-9
head_commit: 71dd0f546830b608fb89762b0904e49896223650
base_commit: f75aef392f869018f78cfedf3c320a6b3fcfda6b
branch: linux-devel/devel-hourly-2020090216
rootfs: debian-10.4-x86_64-20200603.cgz
result_root: "/result/hwsim/hwsim-19-ucode=0x21/lkp-ivb-d01/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/0"
scheduler_version: "/lkp/lkp/.src-20200904-151623"
LKP_SERVER: inn
arch: x86_64
max_uptime: 3600
initrd: "/osimage/debian/debian-10.4-x86_64-20200603.cgz"
bootloader_append:
- root=/dev/ram0
- user=lkp
- job=/lkp/jobs/scheduled/lkp-ivb-d01/hwsim-hwsim-19-ucode=0x21-debian-10.4-x86_64-20200603.cgz-8cafe19852d95d6494cbd8c1ae24dbd621588a91-20200906-9179-1lt4jjz-0.yaml
- ARCH=x86_64
- kconfig=x86_64-rhel-8.3
- branch=linux-devel/devel-hourly-2020090216
- commit=8cafe19852d95d6494cbd8c1ae24dbd621588a91
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/vmlinuz-5.9.0-rc1-00605-g8cafe19852d95d
- max_uptime=3600
- RESULT_ROOT=/result/hwsim/hwsim-19-ucode=0x21/lkp-ivb-d01/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/0
- LKP_SERVER=inn
- nokaslr
- selinux=0
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- console=tty0
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- vga=normal
- rw
modules_initrd: "/pkg/linux/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/modules.cgz"
bm_initrd: "/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20200709.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hwsim_20200619.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/hwsim-x86_64-6eb6cf0-1_20200619.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz"
ucode_initrd: "/osimage/ucode/intel-ucode-20200610.cgz"
lkp_initrd: "/osimage/user/lkp/lkp-x86_64.cgz"
site: inn

#! /lkp/lkp/.src-20200901-134051/include/site/inn
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
oom-killer: 
watchdog: 

#! runtime status
last_kernel: 5.9.0-rc1-00604-g03486660cd9d5
schedule_notify_address: 

#! user overrides
kernel: "/pkg/linux/x86_64-rhel-8.3/gcc-9/8cafe19852d95d6494cbd8c1ae24dbd621588a91/vmlinuz-5.9.0-rc1-00605-g8cafe19852d95d"
dequeue_time: 2020-09-06 01:01:38.999388784 +08:00

#! /lkp/lkp/.src-20200904-151623/include/site/inn
job_state: finished
loadavg: 0.57 0.79 0.37 1/187 7208
start_time: '1599325342'
end_time: '1599325534'
version: "/lkp/lkp/.src-20200904-151709:40fc3246:3bc99f4eb"

[-- Attachment #7: reproduce --]
[-- Type: text/plain, Size: 4523 bytes --]

export USER=root
./build.sh
./start.sh
	./run-tests.py erp_radius 
	./run-tests.py erp_radius_eap_methods 
	./run-tests.py erp_radius_eap_tls_v13 
	./run-tests.py erp_radius_ext 
	./run-tests.py erp_radius_no_wildcard_user 
	./run-tests.py erp_server_no_match 
	./run-tests.py ext_password_eap 
	./run-tests.py ext_password_interworking 
	./run-tests.py ext_password_psk 
	./run-tests.py ext_password_psk_not_found 
	./run-tests.py ext_radio_work 
	./run-tests.py ext_radio_work_disconnect_connect 
	./run-tests.py fils_and_ft 
	./run-tests.py fils_and_ft_over_air 
	./run-tests.py fils_and_ft_over_air_sha384 
	./run-tests.py fils_and_ft_over_ds 
	./run-tests.py fils_and_ft_over_ds_sha384 
	./run-tests.py fils_assoc_replay 
	./run-tests.py fils_auth_gtk_rekey 
	./run-tests.py fils_auth_ptk_rekey_ap 
	./run-tests.py fils_auth_ptk_rekey_ap_erp 
	./run-tests.py fils_auth_ptk_rekey_ap_ext_key_id 
	./run-tests.py fils_sk_auth_mismatch 
	./run-tests.py fils_sk_erp 
	./run-tests.py fils_sk_erp_and_reauth 
	./run-tests.py fils_sk_erp_another_ssid 
	./run-tests.py fils_sk_erp_followed_by_pmksa_caching 
	./run-tests.py fils_sk_erp_radius_ext 
	./run-tests.py fils_sk_erp_radius_roam 
	./run-tests.py fils_sk_erp_roam_diff_akm 
	./run-tests.py fils_sk_erp_server_flush 
	./run-tests.py fils_sk_erp_sha384 
	./run-tests.py fils_sk_erp_sim 
	./run-tests.py fils_sk_full_auth 
	./run-tests.py fils_sk_hlp 
	./run-tests.py fils_sk_hlp_dhcp_parsing 
	./run-tests.py fils_sk_hlp_no_rapid_commit 
	./run-tests.py fils_sk_hlp_oom 
	./run-tests.py fils_sk_hlp_req_parsing 
	./run-tests.py fils_sk_hlp_timeout 
	./run-tests.py fils_sk_multiple_realms 
	./run-tests.py fils_sk_pfs_19 
	./run-tests.py fils_sk_pfs_20 
	./run-tests.py fils_sk_pfs_21 
	./run-tests.py fils_sk_pfs_25 
	./run-tests.py fils_sk_pfs_26 
	./run-tests.py fils_sk_pfs_27 
	./run-tests.py fils_sk_pfs_28 
	./run-tests.py fils_sk_pfs_29 
	./run-tests.py fils_sk_pfs_30 
	./run-tests.py fils_sk_pfs_group_mismatch 
	./run-tests.py fils_sk_pfs_pmksa_caching 
	./run-tests.py fils_sk_pmksa_caching 
	./run-tests.py fils_sk_pmksa_caching_and_cache_id 
	./run-tests.py fils_sk_pmksa_caching_ctrl_ext 
	./run-tests.py fils_sk_pmksa_caching_ocv 
	./run-tests.py fils_sk_sha384_full_auth 
	./run-tests.py fst_ack_response_proto 
	./run-tests.py fst_ap_ack_request_with_bad_fsts_id 
	./run-tests.py fst_ap_ack_request_with_no_session 
	./run-tests.py fst_ap_ack_request_with_session_not_established_init_side 
	./run-tests.py fst_ap_ack_request_with_session_not_established_resp_side 
	./run-tests.py fst_ap_ack_request_with_session_not_set_up 
	./run-tests.py fst_ap_ack_response_with_no_ack_request 
	./run-tests.py fst_ap_ack_response_with_no_session 
	./run-tests.py fst_ap_ack_response_with_session_not_established_init_side 
	./run-tests.py fst_ap_ack_response_with_session_not_established_resp_side 
	./run-tests.py fst_ap_ack_response_with_session_not_set_up 
	./run-tests.py fst_ap_config_default 
	./run-tests.py fst_ap_config_good 
	./run-tests.py fst_ap_config_group_len 
	./run-tests.py fst_ap_config_llt_nan 
	./run-tests.py fst_ap_config_llt_neg 
	./run-tests.py fst_ap_config_llt_too_big 
	./run-tests.py fst_ap_config_llt_zero 
	./run-tests.py fst_ap_config_oom 
	./run-tests.py fst_ap_config_pri_large 
	./run-tests.py fst_ap_config_pri_nan 
	./run-tests.py fst_ap_config_pri_neg 
	./run-tests.py fst_ap_config_pri_zero 
	./run-tests.py fst_ap_connect_to_fst_sta 
	./run-tests.py fst_ap_connect_to_non_fst_sta 
	./run-tests.py fst_ap_ctrl_iface 
	./run-tests.py fst_ap_initiate_session 
	./run-tests.py fst_ap_initiate_session_bad_peer_addr 
	./run-tests.py fst_ap_initiate_session_concurrent_setup_request 
	./run-tests.py fst_ap_initiate_session_invalid_session_id 
	./run-tests.py fst_ap_initiate_session_no_new_iface 
	./run-tests.py fst_ap_initiate_session_no_params 
	./run-tests.py fst_ap_initiate_session_request_with_bad_stie 
	./run-tests.py fst_ap_initiate_session_response_with_bad_stie 
	./run-tests.py fst_ap_initiate_session_response_with_reject 
	./run-tests.py fst_ap_initiate_session_response_with_zero_llt 
	./run-tests.py fst_ap_initiate_session_stt_no_response 
	./run-tests.py fst_ap_remove_session_bad_session_id 
	./run-tests.py fst_ap_remove_session_established 
	./run-tests.py fst_ap_remove_session_no_params 
	./run-tests.py fst_ap_remove_session_not_established 
	./run-tests.py fst_ap_session_request_with_no_session 
	./run-tests.py fst_ap_session_response_accept_with_no_session 
./stop.sh
./start.sh channels=4
./stop.sh

Re: [mac80211_hwsim] 8cafe19852: hwsim.fst_ap_config_default.fail

[Thomas Pedersen]

- LKML

On 2020-09-06 01:49, kernel test robot wrote:
> Greeting,
> 
> FYI, we noticed the following commit (built with gcc-9):
> 
> commit: 8cafe19852d95d6494cbd8c1ae24dbd621588a91 ("[PATCH v2 21/22]
> mac80211_hwsim: indicate support for S1G")
> url:
> https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-support-for-S1G-association/20200901-045826
> base:
> https://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git
> master

This is really cool. Thanks Rong (?).

I'll move the "fix TSF timestamp write to S1G beacon" patch before the 
one which actually exposes S1G to hwsim.

-- 
thomas

Re: [mac80211_hwsim] 8cafe19852: hwsim.fst_ap_config_default.fail

[Johannes Berg]

On Tue, 2020-09-08 at 11:00 -0700, Thomas Pedersen wrote:
> - LKML
> 
> On 2020-09-06 01:49, kernel test robot wrote:
> > Greeting,
> > 
> > FYI, we noticed the following commit (built with gcc-9):
> > 
> > commit: 8cafe19852d95d6494cbd8c1ae24dbd621588a91 ("[PATCH v2 21/22]
> > mac80211_hwsim: indicate support for S1G")
> > url:
> > https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-support-for-S1G-association/20200901-045826
> > base:
> > https://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git
> > master
> 
> This is really cool. Thanks Rong (?).
> 
> I'll move the "fix TSF timestamp write to S1G beacon" patch before the 
> one which actually exposes S1G to hwsim.

Yeah, I was thinking we should do that anyway.

If those two small things (ARRAY_SIZE & patch reordering) are the only
changes, I guess I can do that.

Unless you want to look at the reordering of the nl80211 bands, but you
seemed to say it won't really matter.

johannes

Re: [mac80211_hwsim] 8cafe19852: hwsim.fst_ap_config_default.fail

[Thomas Pedersen]

On 2020-09-08 11:41, Johannes Berg wrote:
> On Tue, 2020-09-08 at 11:00 -0700, Thomas Pedersen wrote:
>> - LKML
>> 
>> On 2020-09-06 01:49, kernel test robot wrote:
>> > Greeting,
>> >
>> > FYI, we noticed the following commit (built with gcc-9):
>> >
>> > commit: 8cafe19852d95d6494cbd8c1ae24dbd621588a91 ("[PATCH v2 21/22]
>> > mac80211_hwsim: indicate support for S1G")
>> > url:
>> > https://github.com/0day-ci/linux/commits/Thomas-Pedersen/add-support-for-S1G-association/20200901-045826
>> > base:
>> > https://git.kernel.org/cgit/linux/kernel/git/jberg/mac80211-next.git
>> > master
>> 
>> This is really cool. Thanks Rong (?).
>> 
>> I'll move the "fix TSF timestamp write to S1G beacon" patch before the
>> one which actually exposes S1G to hwsim.
> 
> Yeah, I was thinking we should do that anyway.
> 
> If those two small things (ARRAY_SIZE & patch reordering) are the only
> changes, I guess I can do that.

I'll send a v3, the patch reorder doesn't apply cleanly.

> Unless you want to look at the reordering of the nl80211 bands, but you
> seemed to say it won't really matter.

Nah :)

-- 
thomas

[PATCH v2 22/22] mac80211_hwsim: fix TSF timestamp write to S1G beacon

[Thomas Pedersen]

mac80211_hwsim was corrupting the S1G beacon because the
timestamp location (and size) does not match the
management beacon.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
 drivers/net/wireless/mac80211_hwsim.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 83d8f54ef93e..18dd23a11ddf 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1742,9 +1742,18 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac,
 	mgmt = (struct ieee80211_mgmt *) skb->data;
 	/* fake header transmission time */
 	data->abs_bcn_ts = mac80211_hwsim_get_tsf_raw();
-	mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts +
-					       data->tsf_offset +
-					       24 * 8 * 10 / bitrate);
+	if (ieee80211_is_s1g_beacon(mgmt->frame_control)) {
+		struct ieee80211_ext *ext = (void *) mgmt;
+
+		ext->u.s1g_beacon.timestamp = cpu_to_le32(data->abs_bcn_ts +
+							  data->tsf_offset +
+							  10 * 8 * 10 /
+							  bitrate);
+	} else {
+		mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts +
+						       data->tsf_offset +
+						       24 * 8 * 10 / bitrate);
+	}
 
 	mac80211_hwsim_tx_frame(hw, skb,
 				rcu_dereference(vif->chanctx_conf)->def.chan);
-- 
2.20.1

Re: [PATCH v2 00/22] add support for S1G association

[Johannes Berg]

On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
> 
> Note the mac80211_hwsim S1G support introduces a regression in a few
> hostap hwsim tests. This is because when processing the reported bands,
> hostap assumes freq < 4000 is 11b, and the actual 11b/g band is
> overwritten by the S1G band info. Though it does count as a userspace
> regression, I'm not sure there is much to do about it besides apply a
> small patch to hostapd which treats freq < 2000 as an unknown band.
> 
> After the hostap workaround
> (https://lists.infradead.org/pipermail/hostap/2020-August/038748.html),
> these patches continue to pass the hwsim tests as well as HEAD.


That sounds like we could "hack around" it by sending the S1G data
first, and then the 2.4 GHz, so the latter overwrites it on broken
versions?

Not sure it's worth it though, I'd say it depends a bit on what real
hardware plans are?

I mean, if it's only hwsim for now ... who cares? And if it's going to
be special hardware that only does S1G, then also meh, you need newer
versions to support it, big deal.

But if OTOH a commonly used chipset like e.g. ath9k or ath10k will get
S1G support, then that'd be more relevant?

johannes

Re: [PATCH v2 00/22] add support for S1G association

[Thomas Pedersen]

On 2020-09-06 09:04, Johannes Berg wrote:
> On Mon, 2020-08-31 at 13:55 -0700, Thomas Pedersen wrote:
>> 
>> Note the mac80211_hwsim S1G support introduces a regression in a few
>> hostap hwsim tests. This is because when processing the reported 
>> bands,
>> hostap assumes freq < 4000 is 11b, and the actual 11b/g band is
>> overwritten by the S1G band info. Though it does count as a userspace
>> regression, I'm not sure there is much to do about it besides apply a
>> small patch to hostapd which treats freq < 2000 as an unknown band.
>> 
>> After the hostap workaround
>> (https://lists.infradead.org/pipermail/hostap/2020-August/038748.html),
>> these patches continue to pass the hwsim tests as well as HEAD.
> 
> 
> That sounds like we could "hack around" it by sending the S1G data
> first, and then the 2.4 GHz, so the latter overwrites it on broken
> versions?

Yes that could work.

> Not sure it's worth it though, I'd say it depends a bit on what real
> hardware plans are?
> 
> I mean, if it's only hwsim for now ... who cares? And if it's going to
> be special hardware that only does S1G, then also meh, you need newer
> versions to support it, big deal.

AFAIK there are no multi-band S1G chips. The initial focus (from WFA) 
seems
to be industrial IOT.

> But if OTOH a commonly used chipset like e.g. ath9k or ath10k will get
> S1G support, then that'd be more relevant?

-- 
thomas