From: Jouni Malinen <jouni@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 0/7] ath11k: add support for WCN6855
Date: Tue, 11 May 2021 19:22:07 +0300 [thread overview]
Message-ID: <20210511162214.29475-1-jouni@codeaurora.org> (raw)
This patchset adds supports for WCN6855. WCN6855 is a PCI based
DBS device. It is very similar to QCA6390 overall but with below
differences:
-WCN6855 has different registers, so new regs are
defined and attached in hw params.
-WCN6855 has different rx descriptor, so new descriptors
are created and in addition, new hw ops are added.
-REO configuration is also different for this target, so
separate reo handling is added in hw ops.
-WCN6855 does not have clock drift problem which is found
on QCA6390, thus no need to configure some related registers.
Baochen Qiang (7):
ath11k: add hw reg support for WCN6855
ath11k: add dp support for WCN6855
ath11k: setup REO for WCN6855
ath11k: setup WBM_IDLE_LINK ring once again
ath11k: add support to get peer id for WCN6855
ath11k: add support for WCN6855
ath11k: don't call ath11k_pci_set_l1ss for WCN6855
drivers/net/wireless/ath/ath11k/core.c | 44 +++
drivers/net/wireless/ath/ath11k/core.h | 1 +
drivers/net/wireless/ath/ath11k/dp.c | 16 +-
drivers/net/wireless/ath/ath11k/hal.c | 10 +
drivers/net/wireless/ath/ath11k/hal.h | 3 +-
drivers/net/wireless/ath/ath11k/hal_rx.c | 41 +--
drivers/net/wireless/ath/ath11k/hal_rx.h | 8 +
drivers/net/wireless/ath/ath11k/hw.c | 391 ++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/hw.h | 5 +
drivers/net/wireless/ath/ath11k/mhi.c | 1 +
drivers/net/wireless/ath/ath11k/pci.c | 45 ++-
drivers/net/wireless/ath/ath11k/rx_desc.h | 87 +++++
12 files changed, 586 insertions(+), 66 deletions(-)
--
2.25.1
next reply other threads:[~2021-05-11 16:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 16:22 Jouni Malinen [this message]
2021-05-11 16:22 ` [PATCH 1/7] ath11k: add hw reg support for WCN6855 Jouni Malinen
2021-05-31 15:09 ` Kalle Valo
2021-06-12 10:31 ` Kalle Valo
2021-05-11 16:22 ` [PATCH 2/7] ath11k: add dp " Jouni Malinen
2021-05-11 16:22 ` [PATCH 3/7] ath11k: setup REO " Jouni Malinen
2021-05-11 16:22 ` [PATCH 4/7] ath11k: setup WBM_IDLE_LINK ring once again Jouni Malinen
2021-05-11 16:22 ` [PATCH 5/7] ath11k: add support to get peer id for WCN6855 Jouni Malinen
2021-05-11 16:22 ` [PATCH 6/7] ath11k: add support " Jouni Malinen
2021-05-11 16:22 ` [PATCH 7/7] ath11k: don't call ath11k_pci_set_l1ss " Jouni Malinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511162214.29475-1-jouni@codeaurora.org \
--to=jouni@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).