linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: kvalo@codeaurora.org, wcn36xx@lists.infradead.org,
	linux-wireless@vger.kernel.org
Cc: bryan.odonoghue@linaro.org, shawn.guo@linaro.org,
	benl@squareup.com, loic.poulain@linaro.org,
	bjorn.andersson@linaro.org
Subject: [PATCH v6 05/12] wcn36xx: Add ipv6 address tracking
Date: Sat,  5 Jun 2021 02:11:33 +0100	[thread overview]
Message-ID: <20210605011140.2004643-6-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20210605011140.2004643-1-bryan.odonoghue@linaro.org>

Taking code from iwlwifi this commit adds a standard callback for
ipv6_addr_change().

This callback allows wcn36xx to know the set of ipv6 addresses. Something
we need to know in order to get wowlan working with ipv6.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
---
 drivers/net/wireless/ath/wcn36xx/hal.h     |  1 +
 drivers/net/wireless/ath/wcn36xx/main.c    | 32 ++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  8 ++++++
 3 files changed, 41 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index b56c8292fa62..90333daed845 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -3466,6 +3466,7 @@ struct wcn36xx_hal_rem_bcn_filter_req {
 #define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE             0x2
 #define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE	\
 	(WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE)
+#define WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX		0x02
 
 struct wcn36xx_hal_ns_offload_params {
 	u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN];
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 9731fcbe2e7f..240ecdd52f81 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -25,6 +25,7 @@
 #include <linux/rpmsg.h>
 #include <linux/soc/qcom/smem_state.h>
 #include <linux/soc/qcom/wcnss_ctrl.h>
+#include <net/ipv6.h>
 #include "wcn36xx.h"
 #include "testmode.h"
 
@@ -1208,6 +1209,34 @@ static int wcn36xx_ampdu_action(struct ieee80211_hw *hw,
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
+static void wcn36xx_ipv6_addr_change(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct inet6_dev *idev)
+{
+	struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
+	struct inet6_ifaddr *ifa;
+	int idx = 0;
+
+	memset(vif_priv->tentative_addrs, 0, sizeof(vif_priv->tentative_addrs));
+
+	read_lock_bh(&idev->lock);
+	list_for_each_entry(ifa, &idev->addr_list, if_list) {
+		vif_priv->target_ipv6_addrs[idx] = ifa->addr;
+		if (ifa->flags & IFA_F_TENTATIVE)
+			__set_bit(idx, vif_priv->tentative_addrs);
+		idx++;
+		if (idx >= WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX)
+			break;
+		wcn36xx_dbg(WCN36XX_DBG_MAC, "%pI6 %s\n", &ifa->addr,
+			    (ifa->flags & IFA_F_TENTATIVE) ? "tentative" : NULL);
+	}
+	read_unlock_bh(&idev->lock);
+
+	vif_priv->num_target_ipv6_addrs = idx;
+}
+#endif
+
 static const struct ieee80211_ops wcn36xx_ops = {
 	.start			= wcn36xx_start,
 	.stop			= wcn36xx_stop,
@@ -1231,6 +1260,9 @@ static const struct ieee80211_ops wcn36xx_ops = {
 	.sta_add		= wcn36xx_sta_add,
 	.sta_remove		= wcn36xx_sta_remove,
 	.ampdu_action		= wcn36xx_ampdu_action,
+#if IS_ENABLED(CONFIG_IPV6)
+	.ipv6_addr_change	= wcn36xx_ipv6_addr_change,
+#endif
 
 	CFG80211_TESTMODE_CMD(wcn36xx_tm_cmd)
 };
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 71fa9992b118..5a5114660b18 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -18,6 +18,7 @@
 #define _WCN36XX_H_
 
 #include <linux/completion.h>
+#include <linux/in6.h>
 #include <linux/printk.h>
 #include <linux/spinlock.h>
 #include <net/mac80211.h>
@@ -136,6 +137,13 @@ struct wcn36xx_vif {
 	u8 self_dpu_desc_index;
 	u8 self_ucast_dpu_sign;
 
+#if IS_ENABLED(CONFIG_IPV6)
+	/* IPv6 addresses for WoWLAN */
+	struct in6_addr target_ipv6_addrs[WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX];
+	unsigned long tentative_addrs[BITS_TO_LONGS(WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX)];
+	int num_target_ipv6_addrs;
+#endif
+
 	struct list_head sta_list;
 };
 
-- 
2.30.1


  parent reply	other threads:[~2021-06-05  1:11 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-05  1:11 [PATCH v6 00/12] wcn36xx: Enable downstream consistent Wake on Lan Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 01/12] wcn36xx: Return result of set_power_params in suspend Bryan O'Donoghue
2021-06-14 15:18   ` Kalle Valo
2021-06-14 15:25     ` Kalle Valo
2021-06-14 15:36       ` Bryan O'Donoghue
2021-06-15  6:41         ` Kalle Valo
2021-06-05  1:11 ` [PATCH v6 02/12] wcn36xx: Run suspend for the first ieee80211_vif Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 03/12] wcn36xx: Add ipv4 ARP offload support in suspend Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 04/12] wcn36xx: Do not flush indication queue on suspend/resume Bryan O'Donoghue
2021-06-05  1:11 ` Bryan O'Donoghue [this message]
2021-06-05  1:11 ` [PATCH v6 06/12] wcn36xx: Add ipv6 namespace offload in suspend Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 07/12] wcn36xx: Add set_rekey_data callback Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 08/12] wcn36xx: Add GTK offload to WoWLAN path Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 09/12] wcn36xx: Add GTK offload info to WoWLAN resume Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 10/12] wcn36xx: Add Host suspend indication support Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 11/12] wcn36xx: Add host resume request support Bryan O'Donoghue
2021-06-05  1:11 ` [PATCH v6 12/12] wcn36xx: Enable WOWLAN flags Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210605011140.2004643-6-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=benl@squareup.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=shawn.guo@linaro.org \
    --cc=wcn36xx@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).