[PATCH 0/4] ath11k: Add spectral scan support for QCN9074

[PATCH 0/4] ath11k: Add spectral scan support for QCN9074

[Jouni Malinen]

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

The following spectral parameters are different across platforms:

========================================================================
				IPQ8074	|	IPQ6018	|	QCN9074
========================================================================
FFT bin size			2	|	4	|	2		
FFT pad size			2	|	0	|	0
Maximum FFT bin count		512	|	512	|	1024
Summary report pad size		0	|	0	|	16
FFT report header length	16	|	16	|	24
========================================================================

To support the spectral scan on QCN9074, segregate these parameter as
configurable values under the hw params.

Karthikeyan Periyasamy (4):
  ath11k: Refactor spectral FFT bin size
  ath11k: Introduce spectral hw configurable param
  ath11k: Fix the spectral minimum FFT bin count
  ath11k: Add spectral scan support for QCN9074

 drivers/net/wireless/ath/ath11k/core.c     | 46 ++++++++++++++++++++++++------
 drivers/net/wireless/ath/ath11k/hw.h       |  9 +++++-
 drivers/net/wireless/ath/ath11k/spectral.c | 38 ++++++++++++------------
 drivers/net/wireless/ath/spectral_common.h |  1 -
 4 files changed, 65 insertions(+), 29 deletions(-)

-- 
2.7.4

[PATCH 1/4] ath11k: Refactor spectral FFT bin size

[Jouni Malinen]

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

In IPQ8074, actual FFT bin size is two bytes but hardware reports it
with extra pad size of two bytes for each FFT bin. So finally each FFT
bin advertise as four bytes size in the collected data. This FFT pad is
not advertised in IPQ6018 platform. To accommodate this different
behavior across the platforms, introduce the hw param fft_pad_sz and use
it in spectral process. Also group all the spectral params under the new
structure in hw param structure for scalable in future.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/core.c     | 27 +++++++++++++++-------
 drivers/net/wireless/ath/ath11k/hw.h       |  6 ++++-
 drivers/net/wireless/ath/ath11k/spectral.c | 13 +++++------
 3 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 3179495cb3c9..2a81a544b6a9 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -59,8 +59,13 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.vdev_start_delay = false,
 		.htt_peer_map_v2 = true,
 		.tcl_0_only = false,
-		.spectral_fft_sz = 2,
-
+		.spectral = {
+			.fft_sz = 2,
+			/* HW bug, expected BIN size is 2 bytes but HW report as 4 bytes.
+			 * so added pad size as 2 bytes to compensate the BIN size
+			 */
+			.fft_pad_sz = 2,
+		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
@@ -101,8 +106,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.vdev_start_delay = false,
 		.htt_peer_map_v2 = true,
 		.tcl_0_only = false,
-		.spectral_fft_sz = 4,
-
+		.spectral = {
+			.fft_sz = 4,
+			.fft_pad_sz = 0,
+		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
@@ -143,8 +150,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.vdev_start_delay = true,
 		.htt_peer_map_v2 = false,
 		.tcl_0_only = true,
-		.spectral_fft_sz = 0,
-
+		.spectral = {
+			.fft_sz = 0,
+			.fft_pad_sz = 0,
+		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
@@ -223,8 +232,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.vdev_start_delay = true,
 		.htt_peer_map_v2 = false,
 		.tcl_0_only = true,
-		.spectral_fft_sz = 0,
-
+		.spectral = {
+			.fft_sz = 0,
+			.fft_pad_sz = 0,
+		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 5b7ce4c7e489..f0349c277026 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -153,7 +153,11 @@ struct ath11k_hw_params {
 	bool vdev_start_delay;
 	bool htt_peer_map_v2;
 	bool tcl_0_only;
-	u8 spectral_fft_sz;
+
+	struct {
+		u8 fft_sz;
+		u8 fft_pad_sz;
+	} spectral;
 
 	u16 interface_modes;
 	bool supports_monitor;
diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c
index 1afe67759659..11b9fec746a2 100644
--- a/drivers/net/wireless/ath/ath11k/spectral.c
+++ b/drivers/net/wireless/ath/ath11k/spectral.c
@@ -11,8 +11,6 @@
 #define ATH11K_SPECTRAL_EVENT_TIMEOUT_MS	1
 
 #define ATH11K_SPECTRAL_DWORD_SIZE		4
-/* HW bug, expected BIN size is 2 bytes but HW report as 4 bytes */
-#define ATH11K_SPECTRAL_BIN_SIZE		4
 #define ATH11K_SPECTRAL_ATH11K_MIN_BINS		64
 #define ATH11K_SPECTRAL_ATH11K_MIN_IB_BINS	32
 #define ATH11K_SPECTRAL_ATH11K_MAX_IB_BINS	256
@@ -581,12 +579,12 @@ int ath11k_spectral_process_fft(struct ath11k *ar,
 	struct spectral_tlv *tlv;
 	int tlv_len, bin_len, num_bins;
 	u16 length, freq;
-	u8 chan_width_mhz;
+	u8 chan_width_mhz, bin_sz;
 	int ret;
 
 	lockdep_assert_held(&ar->spectral.lock);
 
-	if (!ab->hw_params.spectral_fft_sz) {
+	if (!ab->hw_params.spectral.fft_sz) {
 		ath11k_warn(ab, "invalid bin size type for hw rev %d\n",
 			    ab->hw_rev);
 		return -EINVAL;
@@ -604,7 +602,8 @@ int ath11k_spectral_process_fft(struct ath11k *ar,
 		return -EINVAL;
 	}
 
-	num_bins = bin_len / ATH11K_SPECTRAL_BIN_SIZE;
+	bin_sz = ab->hw_params.spectral.fft_sz + ab->hw_params.spectral.fft_pad_sz;
+	num_bins = bin_len / bin_sz;
 	/* Only In-band bins are useful to user for visualize */
 	num_bins >>= 1;
 
@@ -654,7 +653,7 @@ int ath11k_spectral_process_fft(struct ath11k *ar,
 	fft_sample->freq2 = __cpu_to_be16(freq);
 
 	ath11k_spectral_parse_fft(fft_sample->data, fft_report->bins, num_bins,
-				  ab->hw_params.spectral_fft_sz);
+				  ab->hw_params.spectral.fft_sz);
 
 	fft_sample->max_exp = ath11k_spectral_get_max_exp(fft_sample->max_index,
 							  search.peak_mag,
@@ -962,7 +961,7 @@ int ath11k_spectral_init(struct ath11k_base *ab)
 		      ab->wmi_ab.svc_map))
 		return 0;
 
-	if (!ab->hw_params.spectral_fft_sz)
+	if (!ab->hw_params.spectral.fft_sz)
 		return 0;
 
 	for (i = 0; i < ab->num_radios; i++) {
-- 
2.25.1

[PATCH 2/4] ath11k: Introduce spectral hw configurable param

[Jouni Malinen]

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

Below parameters have been identified as configurable across the platforms.
So to scale the spectral across the platforms, move these parameter
into hw param.

	1. Maximum FFT bins
	2. Summary report pad size
	3. FFT report header length

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/core.c     | 12 +++++++++
 drivers/net/wireless/ath/ath11k/hw.h       |  3 +++
 drivers/net/wireless/ath/ath11k/spectral.c | 29 +++++++++++-----------
 drivers/net/wireless/ath/spectral_common.h |  1 -
 4 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 2a81a544b6a9..08b2e67c8e19 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -65,6 +65,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 			 * so added pad size as 2 bytes to compensate the BIN size
 			 */
 			.fft_pad_sz = 2,
+			.summary_pad_sz = 0,
+			.fft_hdr_len = 16,
+			.max_fft_bins = 512,
 		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP) |
@@ -109,6 +112,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.spectral = {
 			.fft_sz = 4,
 			.fft_pad_sz = 0,
+			.summary_pad_sz = 0,
+			.fft_hdr_len = 16,
+			.max_fft_bins = 512,
 		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP) |
@@ -153,6 +159,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.spectral = {
 			.fft_sz = 0,
 			.fft_pad_sz = 0,
+			.summary_pad_sz = 0,
+			.fft_hdr_len = 0,
+			.max_fft_bins = 0,
 		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
@@ -235,6 +244,9 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.spectral = {
 			.fft_sz = 0,
 			.fft_pad_sz = 0,
+			.summary_pad_sz = 0,
+			.fft_hdr_len = 0,
+			.max_fft_bins = 0,
 		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP),
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index f0349c277026..5d150cd793b2 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -157,6 +157,9 @@ struct ath11k_hw_params {
 	struct {
 		u8 fft_sz;
 		u8 fft_pad_sz;
+		u8 summary_pad_sz;
+		u8 fft_hdr_len;
+		u16 max_fft_bins;
 	} spectral;
 
 	u16 interface_modes;
diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c
index 11b9fec746a2..aca3c523632e 100644
--- a/drivers/net/wireless/ath/ath11k/spectral.c
+++ b/drivers/net/wireless/ath/ath11k/spectral.c
@@ -11,20 +11,20 @@
 #define ATH11K_SPECTRAL_EVENT_TIMEOUT_MS	1
 
 #define ATH11K_SPECTRAL_DWORD_SIZE		4
-#define ATH11K_SPECTRAL_ATH11K_MIN_BINS		64
-#define ATH11K_SPECTRAL_ATH11K_MIN_IB_BINS	32
-#define ATH11K_SPECTRAL_ATH11K_MAX_IB_BINS	256
+#define ATH11K_SPECTRAL_MIN_BINS		64
+#define ATH11K_SPECTRAL_MIN_IB_BINS	(ATH11K_SPECTRAL_MIN_BINS >> 1)
+#define ATH11K_SPECTRAL_MAX_IB_BINS(x)	((x)->hw_params.spectral.max_fft_bins >> 1)
 
 #define ATH11K_SPECTRAL_SCAN_COUNT_MAX		4095
 
 /* Max channel computed by sum of 2g and 5g band channels */
 #define ATH11K_SPECTRAL_TOTAL_CHANNEL		41
 #define ATH11K_SPECTRAL_SAMPLES_PER_CHANNEL	70
-#define ATH11K_SPECTRAL_PER_SAMPLE_SIZE		(sizeof(struct fft_sample_ath11k) + \
-						 ATH11K_SPECTRAL_ATH11K_MAX_IB_BINS)
+#define ATH11K_SPECTRAL_PER_SAMPLE_SIZE(x)	(sizeof(struct fft_sample_ath11k) + \
+						 ATH11K_SPECTRAL_MAX_IB_BINS(x))
 #define ATH11K_SPECTRAL_TOTAL_SAMPLE		(ATH11K_SPECTRAL_TOTAL_CHANNEL * \
 						 ATH11K_SPECTRAL_SAMPLES_PER_CHANNEL)
-#define ATH11K_SPECTRAL_SUB_BUFF_SIZE		ATH11K_SPECTRAL_PER_SAMPLE_SIZE
+#define ATH11K_SPECTRAL_SUB_BUFF_SIZE(x)	ATH11K_SPECTRAL_PER_SAMPLE_SIZE(x)
 #define ATH11K_SPECTRAL_NUM_SUB_BUF		ATH11K_SPECTRAL_TOTAL_SAMPLE
 
 #define ATH11K_SPECTRAL_20MHZ			20
@@ -442,8 +442,8 @@ static ssize_t ath11k_write_file_spectral_bins(struct file *file,
 	if (kstrtoul(buf, 0, &val))
 		return -EINVAL;
 
-	if (val < ATH11K_SPECTRAL_ATH11K_MIN_BINS ||
-	    val > SPECTRAL_ATH11K_MAX_NUM_BINS)
+	if (val < ATH11K_SPECTRAL_MIN_BINS ||
+	    val > ar->ab->hw_params.spectral.max_fft_bins)
 		return -EINVAL;
 
 	if (!is_power_of_2(val))
@@ -594,7 +594,7 @@ int ath11k_spectral_process_fft(struct ath11k *ar,
 	tlv_len = FIELD_GET(SPECTRAL_TLV_HDR_LEN, __le32_to_cpu(tlv->header));
 	/* convert Dword into bytes */
 	tlv_len *= ATH11K_SPECTRAL_DWORD_SIZE;
-	bin_len = tlv_len - (sizeof(*fft_report) - sizeof(*tlv));
+	bin_len = tlv_len - ab->hw_params.spectral.fft_hdr_len;
 
 	if (data_len < (bin_len + sizeof(*fft_report))) {
 		ath11k_warn(ab, "mismatch in expected bin len %d and data len %d\n",
@@ -607,8 +607,8 @@ int ath11k_spectral_process_fft(struct ath11k *ar,
 	/* Only In-band bins are useful to user for visualize */
 	num_bins >>= 1;
 
-	if (num_bins < ATH11K_SPECTRAL_ATH11K_MIN_IB_BINS ||
-	    num_bins > ATH11K_SPECTRAL_ATH11K_MAX_IB_BINS ||
+	if (num_bins < ATH11K_SPECTRAL_MIN_IB_BINS ||
+	    num_bins > ATH11K_SPECTRAL_MAX_IB_BINS(ab) ||
 	    !is_power_of_2(num_bins)) {
 		ath11k_warn(ab, "Invalid num of bins %d\n", num_bins);
 		return -EINVAL;
@@ -689,7 +689,7 @@ static int ath11k_spectral_process_data(struct ath11k *ar,
 		goto unlock;
 	}
 
-	sample_sz = sizeof(*fft_sample) + ATH11K_SPECTRAL_ATH11K_MAX_IB_BINS;
+	sample_sz = sizeof(*fft_sample) + ATH11K_SPECTRAL_MAX_IB_BINS(ab);
 	fft_sample = kmalloc(sample_sz, GFP_ATOMIC);
 	if (!fft_sample) {
 		ret = -ENOBUFS;
@@ -737,7 +737,8 @@ static int ath11k_spectral_process_data(struct ath11k *ar,
 			 * is 4 DWORD size (16 bytes).
 			 * Need to remove this workaround once HW bug fixed
 			 */
-			tlv_len = sizeof(*summary) - sizeof(*tlv);
+			tlv_len = sizeof(*summary) - sizeof(*tlv) +
+				  ab->hw_params.spectral.summary_pad_sz;
 
 			if (tlv_len < (sizeof(*summary) - sizeof(*tlv))) {
 				ath11k_warn(ab, "failed to parse spectral summary at bytes %d tlv_len:%d\n",
@@ -900,7 +901,7 @@ static inline int ath11k_spectral_debug_register(struct ath11k *ar)
 
 	ar->spectral.rfs_scan = relay_open("spectral_scan",
 					   ar->debug.debugfs_pdev,
-					   ATH11K_SPECTRAL_SUB_BUFF_SIZE,
+					   ATH11K_SPECTRAL_SUB_BUFF_SIZE(ar->ab),
 					   ATH11K_SPECTRAL_NUM_SUB_BUF,
 					   &rfs_scan_cb, NULL);
 	if (!ar->spectral.rfs_scan) {
diff --git a/drivers/net/wireless/ath/spectral_common.h b/drivers/net/wireless/ath/spectral_common.h
index 9c2e5458e425..e14f374f97d4 100644
--- a/drivers/net/wireless/ath/spectral_common.h
+++ b/drivers/net/wireless/ath/spectral_common.h
@@ -24,7 +24,6 @@
  * could be acquired so far.
  */
 #define SPECTRAL_ATH10K_MAX_NUM_BINS		256
-#define SPECTRAL_ATH11K_MAX_NUM_BINS		512
 
 /* FFT sample format given to userspace via debugfs.
  *
-- 
2.25.1

[PATCH 3/4] ath11k: Fix the spectral minimum FFT bin count

[Jouni Malinen]

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

User was not able to configure the spectral with the FFT bin count 32.
In all supported platforms, the expected minimum FFT bin count is 32 but
it was wrongly defined as 64. This restrict the user to not configure
down to the actually supported minimum FFT bin count. So update the
minimum FFT bin count as 32.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/spectral.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/spectral.c b/drivers/net/wireless/ath/ath11k/spectral.c
index aca3c523632e..7473d1f3ddf5 100644
--- a/drivers/net/wireless/ath/ath11k/spectral.c
+++ b/drivers/net/wireless/ath/ath11k/spectral.c
@@ -11,7 +11,7 @@
 #define ATH11K_SPECTRAL_EVENT_TIMEOUT_MS	1
 
 #define ATH11K_SPECTRAL_DWORD_SIZE		4
-#define ATH11K_SPECTRAL_MIN_BINS		64
+#define ATH11K_SPECTRAL_MIN_BINS		32
 #define ATH11K_SPECTRAL_MIN_IB_BINS	(ATH11K_SPECTRAL_MIN_BINS >> 1)
 #define ATH11K_SPECTRAL_MAX_IB_BINS(x)	((x)->hw_params.spectral.max_fft_bins >> 1)
 
-- 
2.25.1

[PATCH 4/4] ath11k: Add spectral scan support for QCN9074

[Jouni Malinen]

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

Populate the below hw parameters as per the QCN9074 support
	1. FFT bin size as two bytes
	2. Maximum FFT bin count as 1024
	3. Summary report pad size as 16
	4. FFT report header length as 24

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 08b2e67c8e19..c97830633f1f 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -201,6 +201,13 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.vdev_start_delay = false,
 		.htt_peer_map_v2 = true,
 		.tcl_0_only = false,
+		.spectral = {
+			.fft_sz = 2,
+			.fft_pad_sz = 0,
+			.summary_pad_sz = 16,
+			.fft_hdr_len = 24,
+			.max_fft_bins = 1024,
+		},
 		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
 					BIT(NL80211_IFTYPE_AP) |
 					BIT(NL80211_IFTYPE_MESH_POINT),
-- 
2.25.1

Re: [PATCH 1/4] ath11k: Refactor spectral FFT bin size

[Kalle Valo]

Jouni Malinen <jouni@codeaurora.org> writes:

> From: Karthikeyan Periyasamy <periyasa@codeaurora.org>
>
> In IPQ8074, actual FFT bin size is two bytes but hardware reports it
> with extra pad size of two bytes for each FFT bin. So finally each FFT
> bin advertise as four bytes size in the collected data. This FFT pad is
> not advertised in IPQ6018 platform. To accommodate this different
> behavior across the platforms, introduce the hw param fft_pad_sz and use
> it in spectral process. Also group all the spectral params under the new
> structure in hw param structure for scalable in future.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
> Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
> Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath11k/core.c     | 27 +++++++++++++++-------
>  drivers/net/wireless/ath/ath11k/hw.h       |  6 ++++-
>  drivers/net/wireless/ath/ath11k/spectral.c | 13 +++++------
>  3 files changed, 30 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
> index 3179495cb3c9..2a81a544b6a9 100644
> --- a/drivers/net/wireless/ath/ath11k/core.c
> +++ b/drivers/net/wireless/ath/ath11k/core.c
> @@ -59,8 +59,13 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.vdev_start_delay = false,
>  		.htt_peer_map_v2 = true,
>  		.tcl_0_only = false,
> -		.spectral_fft_sz = 2,
> -
> +		.spectral = {
> +			.fft_sz = 2,
> +			/* HW bug, expected BIN size is 2 bytes but HW report as 4 bytes.
> +			 * so added pad size as 2 bytes to compensate the BIN size
> +			 */
> +			.fft_pad_sz = 2,
> +		},
>  		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
>  					BIT(NL80211_IFTYPE_AP) |
>  					BIT(NL80211_IFTYPE_MESH_POINT),
> @@ -101,8 +106,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.vdev_start_delay = false,
>  		.htt_peer_map_v2 = true,
>  		.tcl_0_only = false,
> -		.spectral_fft_sz = 4,
> -
> +		.spectral = {
> +			.fft_sz = 4,
> +			.fft_pad_sz = 0,
> +		},
>  		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
>  					BIT(NL80211_IFTYPE_AP) |
>  					BIT(NL80211_IFTYPE_MESH_POINT),
> @@ -143,8 +150,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.vdev_start_delay = true,
>  		.htt_peer_map_v2 = false,
>  		.tcl_0_only = true,
> -		.spectral_fft_sz = 0,
> -
> +		.spectral = {
> +			.fft_sz = 0,
> +			.fft_pad_sz = 0,
> +		},
>  		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
>  					BIT(NL80211_IFTYPE_AP),
>  		.supports_monitor = false,
> @@ -223,8 +232,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
>  		.vdev_start_delay = true,
>  		.htt_peer_map_v2 = false,
>  		.tcl_0_only = true,
> -		.spectral_fft_sz = 0,
> -
> +		.spectral = {
> +			.fft_sz = 0,
> +			.fft_pad_sz = 0,
> +		},
>  		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
>  					BIT(NL80211_IFTYPE_AP),
>  		.supports_monitor = false,

QCN9074 hw1.0 didn't have an entry. I suspect what happened was that
support for wcn6855 was added between writing the patch and me
committing wcn6855 patches, which confused git.

I changed it so that both qcn9074 and wcn6855 have this:

		.spectral = {
			.fft_sz = 0,
			.fft_pad_sz = 0,
		},

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH 1/4] ath11k: Refactor spectral FFT bin size

[Kalle Valo]

Jouni Malinen <jouni@codeaurora.org> wrote:

> In IPQ8074, actual FFT bin size is two bytes but hardware reports it
> with extra pad size of two bytes for each FFT bin. So finally each FFT
> bin advertise as four bytes size in the collected data. This FFT pad is
> not advertised in IPQ6018 platform. To accommodate this different
> behavior across the platforms, introduce the hw param fft_pad_sz and use
> it in spectral process. Also group all the spectral params under the new
> structure in hw param structure for scalable in future.
> 
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
> Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
> Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

4 patches applied to ath-next branch of ath.git, thanks.

cc2ad7541486 ath11k: Refactor spectral FFT bin size
1cae9c0009d3 ath11k: Introduce spectral hw configurable param
6dfd20c8a6cd ath11k: Fix the spectral minimum FFT bin count
b72e86c07e98 ath11k: Add spectral scan support for QCN9074

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20210721180809.90960-2-jouni@codeaurora.org/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches