linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Colin King <colin.king@canonical.com>
To: Ping-Ke Shih <pkshih@realtek.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org, Joe Perches <joe@perches.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/3][V2] rtlwifi: rtl8192de: make arrays static const, makes object smaller
Date: Tue,  3 Aug 2021 15:49:48 +0100	[thread overview]
Message-ID: <20210803144949.79433-2-colin.king@canonical.com> (raw)
In-Reply-To: <20210803144949.79433-1-colin.king@canonical.com>

From: Colin Ian King <colin.king@canonical.com>

Don't populate arrays the stack but instead make them static const. Replace
array channel_info with channel_all since it contains the same data as
channel_all. Makes object code smaller by 961 bytes.

Before:
   text	   data	    bss	    dec	   hex	filename
 128147	  44250	   1024	 173421	 2a56d	../realtek/rtlwifi/rtl8192de/phy.o

After
   text	   data	    bss	    dec	   hex	filename
 127122	  44314	   1024	 172460	 2a1ac	../realtek/rtlwifi/rtl8192de/phy.o

(gcc version 10.2.0)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---

V2: Remove channel_info and replace with channel_all since it is the
    same as channel_info. Thanks to Joe Perches for spotting this.
---
 .../wireless/realtek/rtlwifi/rtl8192de/phy.c  | 48 ++++++++-----------
 1 file changed, 20 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
index 50c2d8f6f9c0..8ae69d914312 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c
@@ -160,6 +160,15 @@ static u32 targetchnl_2g[TARGET_CHNL_NUM_2G] = {
 	25711, 25658, 25606, 25554, 25502, 25451, 25328
 };
 
+static const u8 channel_all[59] = {
+	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
+	36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58,
+	60, 62, 64, 100, 102, 104, 106, 108, 110, 112,
+	114, 116, 118, 120, 122, 124, 126, 128,	130,
+	132, 134, 136, 138, 140, 149, 151, 153, 155,
+	157, 159, 161, 163, 165
+};
+
 static u32 _rtl92d_phy_calculate_bit_shift(u32 bitmask)
 {
 	u32 i = ffs(bitmask);
@@ -1354,14 +1363,6 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel)
 
 u8 rtl92d_get_rightchnlplace_for_iqk(u8 chnl)
 {
-	u8 channel_all[59] = {
-		1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
-		36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58,
-		60, 62, 64, 100, 102, 104, 106, 108, 110, 112,
-		114, 116, 118, 120, 122, 124, 126, 128,	130,
-		132, 134, 136, 138, 140, 149, 151, 153, 155,
-		157, 159, 161, 163, 165
-	};
 	u8 place = chnl;
 
 	if (chnl > 14) {
@@ -3220,37 +3221,28 @@ void rtl92d_phy_config_macphymode_info(struct ieee80211_hw *hw)
 u8 rtl92d_get_chnlgroup_fromarray(u8 chnl)
 {
 	u8 group;
-	u8 channel_info[59] = {
-		1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
-		36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56,
-		58, 60, 62, 64, 100, 102, 104, 106, 108,
-		110, 112, 114, 116, 118, 120, 122, 124,
-		126, 128, 130, 132, 134, 136, 138, 140,
-		149, 151, 153, 155, 157, 159, 161, 163,
-		165
-	};
 
-	if (channel_info[chnl] <= 3)
+	if (channel_all[chnl] <= 3)
 		group = 0;
-	else if (channel_info[chnl] <= 9)
+	else if (channel_all[chnl] <= 9)
 		group = 1;
-	else if (channel_info[chnl] <= 14)
+	else if (channel_all[chnl] <= 14)
 		group = 2;
-	else if (channel_info[chnl] <= 44)
+	else if (channel_all[chnl] <= 44)
 		group = 3;
-	else if (channel_info[chnl] <= 54)
+	else if (channel_all[chnl] <= 54)
 		group = 4;
-	else if (channel_info[chnl] <= 64)
+	else if (channel_all[chnl] <= 64)
 		group = 5;
-	else if (channel_info[chnl] <= 112)
+	else if (channel_all[chnl] <= 112)
 		group = 6;
-	else if (channel_info[chnl] <= 126)
+	else if (channel_all[chnl] <= 126)
 		group = 7;
-	else if (channel_info[chnl] <= 140)
+	else if (channel_all[chnl] <= 140)
 		group = 8;
-	else if (channel_info[chnl] <= 153)
+	else if (channel_all[chnl] <= 153)
 		group = 9;
-	else if (channel_info[chnl] <= 159)
+	else if (channel_all[chnl] <= 159)
 		group = 10;
 	else
 		group = 11;
-- 
2.31.1


  reply	other threads:[~2021-08-03 14:49 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03 14:49 [PATCH 1/3][RESEND] rtlwifi: rtl8192de: Remove redundant variable initializations Colin King
2021-08-03 14:49 ` Colin King [this message]
2021-08-03 15:09   ` [PATCH 2/3][V2] rtlwifi: rtl8192de: make arrays static const, makes object smaller Joe Perches
2021-08-03 15:15     ` Colin Ian King
2021-08-03 15:23       ` Joe Perches
2021-08-03 14:49 ` [PATCH 3/3] rtlwifi: rtl8192de: fix array size limit in for-loop Colin King
2021-08-03 18:11   ` Joe Perches
2021-08-03 18:12     ` Colin Ian King
2021-08-21 17:31   ` Kalle Valo
2021-08-21 17:33 ` [PATCH 1/3][RESEND] rtlwifi: rtl8192de: Remove redundant variable initializations Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210803144949.79433-2-colin.king@canonical.com \
    --to=colin.king@canonical.com \
    --cc=davem@davemloft.net \
    --cc=joe@perches.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pkshih@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).