From: Ricardo Martinez <ricardo.martinez@linux.intel.com>
To: netdev@vger.kernel.org, linux-wireless@vger.kernel.org
Cc: kuba@kernel.org, davem@davemloft.net, johannes@sipsolutions.net,
ryazanov.s.a@gmail.com, loic.poulain@linaro.org,
m.chetan.kumar@intel.com, chandrashekar.devegowda@intel.com,
linuxwwan@intel.com, chiranjeevi.rapolu@linux.intel.com,
haijun.liu@mediatek.com, amir.hanania@intel.com,
andriy.shevchenko@linux.intel.com, dinesh.sharma@intel.com,
eliot.lee@intel.com, mika.westerberg@linux.intel.com,
moises.veleta@intel.com, pierre-louis.bossart@intel.com,
muralidharan.sethuraman@intel.com,
Soumya.Prakash.Mishra@intel.com, sreehari.kancharla@intel.com,
suresh.nagaraj@intel.com,
Ricardo Martinez <ricardo.martinez@linux.intel.com>
Subject: [PATCH v2 11/14] net: wwan: t7xx: Runtime PM
Date: Sun, 31 Oct 2021 20:56:32 -0700 [thread overview]
Message-ID: <20211101035635.26999-12-ricardo.martinez@linux.intel.com> (raw)
In-Reply-To: <20211101035635.26999-1-ricardo.martinez@linux.intel.com>
From: Haijun Lio <haijun.liu@mediatek.com>
Enables runtime power management callbacks including runtime_suspend
and runtime_resume. Autosuspend is used to prevent overhead by frequent
wake-ups.
Signed-off-by: Haijun Lio <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Eliot Lee <eliot.lee@intel.com>
Signed-off-by: Eliot Lee <eliot.lee@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
---
drivers/net/wwan/t7xx/t7xx_hif_cldma.c | 13 +++++++++++++
drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c | 16 ++++++++++++++++
drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c | 15 +++++++++++++++
drivers/net/wwan/t7xx/t7xx_pci.c | 21 +++++++++++++++++++++
4 files changed, 65 insertions(+)
diff --git a/drivers/net/wwan/t7xx/t7xx_hif_cldma.c b/drivers/net/wwan/t7xx/t7xx_hif_cldma.c
index bcee31a5af12..18c1fcccd9dc 100644
--- a/drivers/net/wwan/t7xx/t7xx_hif_cldma.c
+++ b/drivers/net/wwan/t7xx/t7xx_hif_cldma.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
#include <linux/skbuff.h>
#include "t7xx_cldma.h"
@@ -310,6 +311,8 @@ static void cldma_rx_done(struct work_struct *work)
/* enable RX_DONE && EMPTY interrupt */
cldma_hw_dismask_txrxirq(&md_ctrl->hw_info, queue->index, true);
cldma_hw_dismask_eqirq(&md_ctrl->hw_info, queue->index, true);
+ pm_runtime_mark_last_busy(md_ctrl->dev);
+ pm_runtime_put_autosuspend(md_ctrl->dev);
}
static int cldma_gpd_tx_collect(struct cldma_queue *queue)
@@ -451,6 +454,8 @@ static void cldma_tx_done(struct work_struct *work)
}
spin_unlock_irqrestore(&md_ctrl->cldma_lock, flags);
+ pm_runtime_mark_last_busy(md_ctrl->dev);
+ pm_runtime_put_autosuspend(md_ctrl->dev);
}
static void cldma_ring_free(struct cldma_ctrl *md_ctrl,
@@ -674,6 +679,7 @@ static void cldma_irq_work_cb(struct cldma_ctrl *md_ctrl)
if (l2_tx_int & (TXRX_STATUS_BITMASK | EMPTY_STATUS_BITMASK)) {
for (i = 0; i < CLDMA_TXQ_NUM; i++) {
if (l2_tx_int & BIT(i)) {
+ pm_runtime_get(md_ctrl->dev);
/* disable TX_DONE interrupt */
cldma_hw_mask_eqirq(hw_info, i, false);
cldma_hw_mask_txrxirq(hw_info, i, false);
@@ -702,6 +708,7 @@ static void cldma_irq_work_cb(struct cldma_ctrl *md_ctrl)
if (l2_rx_int & (TXRX_STATUS_BITMASK | EMPTY_STATUS_BITMASK)) {
for (i = 0; i < CLDMA_RXQ_NUM; i++) {
if (l2_rx_int & (BIT(i) | EQ_STA_BIT(i))) {
+ pm_runtime_get(md_ctrl->dev);
/* disable RX_DONE and QUEUE_EMPTY interrupt */
cldma_hw_mask_eqirq(hw_info, i, true);
cldma_hw_mask_txrxirq(hw_info, i, true);
@@ -1133,8 +1140,12 @@ int cldma_send_skb(enum cldma_id hif_id, int qno, struct sk_buff *skb, bool skb_
struct cldma_queue *queue;
unsigned long flags;
int ret = 0;
+ int val;
md_ctrl = md_cd_get(hif_id);
+ val = pm_runtime_resume_and_get(md_ctrl->dev);
+ if (val < 0 && val != -EACCES)
+ return val;
if (qno >= CLDMA_TXQ_NUM) {
ret = -EINVAL;
@@ -1199,6 +1210,8 @@ int cldma_send_skb(enum cldma_id hif_id, int qno, struct sk_buff *skb, bool skb_
} while (!ret);
exit:
+ pm_runtime_mark_last_busy(md_ctrl->dev);
+ pm_runtime_put_autosuspend(md_ctrl->dev);
return ret;
}
diff --git a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c
index e4af05441707..ae38fb29ec81 100644
--- a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c
+++ b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_rx.c
@@ -22,6 +22,7 @@
#include <linux/kthread.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <linux/pm_runtime.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -1039,6 +1040,7 @@ static void dpmaif_rxq_work(struct work_struct *work)
{
struct dpmaif_ctrl *dpmaif_ctrl;
struct dpmaif_rx_queue *rxq;
+ int ret;
rxq = container_of(work, struct dpmaif_rx_queue, dpmaif_rxq_work);
dpmaif_ctrl = rxq->dpmaif_ctrl;
@@ -1053,8 +1055,14 @@ static void dpmaif_rxq_work(struct work_struct *work)
return;
}
+ ret = pm_runtime_resume_and_get(dpmaif_ctrl->dev);
+ if (ret < 0 && ret != -EACCES)
+ return;
+
dpmaif_do_rx(dpmaif_ctrl, rxq);
+ pm_runtime_mark_last_busy(dpmaif_ctrl->dev);
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
atomic_set(&rxq->rx_processing, 0);
}
@@ -1417,9 +1425,14 @@ static void dpmaif_bat_release_work(struct work_struct *work)
{
struct dpmaif_ctrl *dpmaif_ctrl;
struct dpmaif_rx_queue *rxq;
+ int ret;
dpmaif_ctrl = container_of(work, struct dpmaif_ctrl, bat_release_work);
+ ret = pm_runtime_resume_and_get(dpmaif_ctrl->dev);
+ if (ret < 0 && ret != -EACCES)
+ return;
+
/* ALL RXQ use one BAT table, so choose DPF_RX_QNO_DFT */
rxq = &dpmaif_ctrl->rxq[DPF_RX_QNO_DFT];
@@ -1427,6 +1440,9 @@ static void dpmaif_bat_release_work(struct work_struct *work)
dpmaif_dl_pkt_bat_release_and_add(rxq);
/* frag BAT release and add */
dpmaif_dl_frag_bat_release_and_add(rxq);
+
+ pm_runtime_mark_last_busy(dpmaif_ctrl->dev);
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
}
int dpmaif_bat_release_work_alloc(struct dpmaif_ctrl *dpmaif_ctrl)
diff --git a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c
index 3ae87761af05..84fc980824e5 100644
--- a/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c
+++ b/drivers/net/wwan/t7xx/t7xx_hif_dpmaif_tx.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/list.h>
+#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
#include "t7xx_common.h"
@@ -167,6 +168,10 @@ static void dpmaif_tx_done(struct work_struct *work)
txq = container_of(work, struct dpmaif_tx_queue, dpmaif_tx_work);
dpmaif_ctrl = txq->dpmaif_ctrl;
+ ret = pm_runtime_resume_and_get(dpmaif_ctrl->dev);
+ if (ret < 0 && ret != -EACCES)
+ return;
+
ret = dpmaif_tx_release(dpmaif_ctrl, txq->index, txq->drb_size_cnt);
if (ret == -EAGAIN ||
(dpmaif_hw_check_clr_ul_done_status(&dpmaif_ctrl->hif_hw_info, txq->index) &&
@@ -179,6 +184,9 @@ static void dpmaif_tx_done(struct work_struct *work)
dpmaif_clr_ip_busy_sts(&dpmaif_ctrl->hif_hw_info);
dpmaif_unmask_ulq_interrupt(dpmaif_ctrl, txq->index);
}
+
+ pm_runtime_mark_last_busy(dpmaif_ctrl->dev);
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
}
static void set_drb_msg(struct dpmaif_ctrl *dpmaif_ctrl,
@@ -513,6 +521,7 @@ static void do_tx_hw_push(struct dpmaif_ctrl *dpmaif_ctrl)
static int dpmaif_tx_hw_push_thread(void *arg)
{
struct dpmaif_ctrl *dpmaif_ctrl;
+ int ret;
dpmaif_ctrl = arg;
while (!kthread_should_stop()) {
@@ -528,7 +537,13 @@ static int dpmaif_tx_hw_push_thread(void *arg)
if (kthread_should_stop())
break;
+ ret = pm_runtime_resume_and_get(dpmaif_ctrl->dev);
+ if (ret < 0 && ret != -EACCES)
+ return ret;
+
do_tx_hw_push(dpmaif_ctrl);
+ pm_runtime_mark_last_busy(dpmaif_ctrl->dev);
+ pm_runtime_put_autosuspend(dpmaif_ctrl->dev);
}
return 0;
diff --git a/drivers/net/wwan/t7xx/t7xx_pci.c b/drivers/net/wwan/t7xx/t7xx_pci.c
index 5afd8eb4203f..3328a225e20b 100644
--- a/drivers/net/wwan/t7xx/t7xx_pci.c
+++ b/drivers/net/wwan/t7xx/t7xx_pci.c
@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/pci.h>
+#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
#include "t7xx_mhccif.h"
@@ -34,6 +35,7 @@
#define PCI_EREG_BASE 2
#define PM_ACK_TIMEOUT_MS 1500
+#define PM_AUTOSUSPEND_MS 20000
#define PM_RESOURCE_POLL_TIMEOUT_US 10000
#define PM_RESOURCE_POLL_STEP_US 100
@@ -78,6 +80,8 @@ static int mtk_pci_pm_init(struct mtk_pci_dev *mtk_dev)
atomic_set(&mtk_dev->md_pm_state, MTK_PM_INIT);
iowrite32(L1_DISABLE_BIT(0), IREG_BASE(mtk_dev) + DIS_ASPM_LOWPWR_SET_0);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, PM_AUTOSUSPEND_MS);
+ pm_runtime_use_autosuspend(&pdev->dev);
return mtk_wait_pm_config(mtk_dev);
}
@@ -92,6 +96,8 @@ void mtk_pci_pm_init_late(struct mtk_pci_dev *mtk_dev)
D2H_INT_RESUME_ACK_AP);
iowrite32(L1_DISABLE_BIT(0), IREG_BASE(mtk_dev) + DIS_ASPM_LOWPWR_CLR_0);
atomic_set(&mtk_dev->md_pm_state, MTK_PM_RESUMED);
+
+ pm_runtime_put_noidle(&mtk_dev->pdev->dev);
}
static int mtk_pci_pm_reinit(struct mtk_pci_dev *mtk_dev)
@@ -101,6 +107,8 @@ static int mtk_pci_pm_reinit(struct mtk_pci_dev *mtk_dev)
*/
atomic_set(&mtk_dev->md_pm_state, MTK_PM_INIT);
+ pm_runtime_get_noresume(&mtk_dev->pdev->dev);
+
iowrite32(L1_DISABLE_BIT(0), IREG_BASE(mtk_dev) + DIS_ASPM_LOWPWR_SET_0);
return mtk_wait_pm_config(mtk_dev);
}
@@ -405,6 +413,7 @@ static int __mtk_pci_pm_resume(struct pci_dev *pdev, bool state_check)
mtk_dev->rgu_pci_irq_en = true;
mtk_pcie_mac_set_int(mtk_dev, SAP_RGU_INT);
iowrite32(L1_DISABLE_BIT(0), IREG_BASE(mtk_dev) + DIS_ASPM_LOWPWR_CLR_0);
+ pm_runtime_mark_last_busy(&pdev->dev);
atomic_set(&mtk_dev->md_pm_state, MTK_PM_RESUMED);
return ret;
@@ -446,6 +455,16 @@ static int mtk_pci_pm_thaw(struct device *dev)
return __mtk_pci_pm_resume(to_pci_dev(dev), false);
}
+static int mtk_pci_pm_runtime_suspend(struct device *dev)
+{
+ return __mtk_pci_pm_suspend(to_pci_dev(dev));
+}
+
+static int mtk_pci_pm_runtime_resume(struct device *dev)
+{
+ return __mtk_pci_pm_resume(to_pci_dev(dev), true);
+}
+
static const struct dev_pm_ops mtk_pci_pm_ops = {
.suspend = mtk_pci_pm_suspend,
.resume = mtk_pci_pm_resume,
@@ -455,6 +474,8 @@ static const struct dev_pm_ops mtk_pci_pm_ops = {
.poweroff = mtk_pci_pm_suspend,
.restore = mtk_pci_pm_resume,
.restore_noirq = mtk_pci_pm_resume_noirq,
+ .runtime_suspend = mtk_pci_pm_runtime_suspend,
+ .runtime_resume = mtk_pci_pm_runtime_resume
};
static int mtk_request_irq(struct pci_dev *pdev)
--
2.17.1
next prev parent reply other threads:[~2021-11-01 3:57 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-01 3:56 [PATCH v2 00/14] net: wwan: t7xx: PCIe driver for MediaTek M.2 modem Ricardo Martinez
2021-11-01 3:56 ` [PATCH v2 01/14] net: wwan: Add default MTU size Ricardo Martinez
2021-11-06 18:01 ` Sergey Ryazanov
2021-11-01 3:56 ` [PATCH v2 02/14] net: wwan: t7xx: Add control DMA interface Ricardo Martinez
2021-11-01 14:03 ` Andy Shevchenko
2021-11-19 6:36 ` Martinez, Ricardo
2021-11-19 8:28 ` Andy Shevchenko
2021-11-06 18:01 ` Sergey Ryazanov
2021-11-01 3:56 ` [PATCH v2 03/14] net: wwan: t7xx: Add core components Ricardo Martinez
2021-11-02 15:46 ` Andy Shevchenko
2021-11-06 18:05 ` Sergey Ryazanov
2021-12-02 22:42 ` Martinez, Ricardo
2021-11-01 3:56 ` [PATCH v2 04/14] net: wwan: t7xx: Add port proxy infrastructure Ricardo Martinez
2021-11-03 15:38 ` Andy Shevchenko
2021-11-19 6:41 ` Martinez, Ricardo
2021-11-06 18:06 ` Sergey Ryazanov
2021-12-01 6:04 ` Martinez, Ricardo
2021-11-01 3:56 ` [PATCH v2 05/14] net: wwan: t7xx: Add control port Ricardo Martinez
2021-11-06 18:07 ` Sergey Ryazanov
2021-11-01 3:56 ` [PATCH v2 06/14] net: wwan: t7xx: Add AT and MBIM WWAN ports Ricardo Martinez
2021-11-09 12:06 ` Sergey Ryazanov
2021-12-01 6:14 ` Martinez, Ricardo
2021-12-01 20:45 ` Sergey Ryazanov
2021-12-07 2:41 ` Martinez, Ricardo
2022-01-12 4:29 ` Martinez, Ricardo
2021-11-01 3:56 ` [PATCH v2 07/14] net: wwan: t7xx: Data path HW layer Ricardo Martinez
2021-11-01 3:56 ` [PATCH v2 08/14] net: wwan: t7xx: Add data path interface Ricardo Martinez
2021-11-06 18:08 ` Sergey Ryazanov
2021-11-01 3:56 ` [PATCH v2 09/14] net: wwan: t7xx: Add WWAN network interface Ricardo Martinez
2021-11-06 18:08 ` Sergey Ryazanov
2021-12-01 6:06 ` Martinez, Ricardo
2021-12-01 21:09 ` Sergey Ryazanov
2021-12-02 20:44 ` Martinez, Ricardo
2021-11-01 3:56 ` [PATCH v2 10/14] net: wwan: t7xx: Introduce power management support Ricardo Martinez
2021-11-01 3:56 ` Ricardo Martinez [this message]
2021-11-01 3:56 ` [PATCH v2 12/14] net: wwan: t7xx: Device deep sleep lock/unlock Ricardo Martinez
2021-11-01 3:56 ` [PATCH v2 13/14] net: wwan: t7xx: Add debug and test ports Ricardo Martinez
2021-11-06 18:10 ` Sergey Ryazanov
2021-11-01 3:56 ` [PATCH v2 14/14] net: wwan: t7xx: Add maintainers and documentation Ricardo Martinez
2021-11-01 13:09 ` [PATCH v2 00/14] net: wwan: t7xx: PCIe driver for MediaTek M.2 modem Denis Kirjanov
2021-11-06 18:10 ` Sergey Ryazanov
2021-11-09 5:26 ` Martinez, Ricardo
2021-11-09 11:35 ` Sergey Ryazanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211101035635.26999-12-ricardo.martinez@linux.intel.com \
--to=ricardo.martinez@linux.intel.com \
--cc=Soumya.Prakash.Mishra@intel.com \
--cc=amir.hanania@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=chandrashekar.devegowda@intel.com \
--cc=chiranjeevi.rapolu@linux.intel.com \
--cc=davem@davemloft.net \
--cc=dinesh.sharma@intel.com \
--cc=eliot.lee@intel.com \
--cc=haijun.liu@mediatek.com \
--cc=johannes@sipsolutions.net \
--cc=kuba@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linuxwwan@intel.com \
--cc=loic.poulain@linaro.org \
--cc=m.chetan.kumar@intel.com \
--cc=mika.westerberg@linux.intel.com \
--cc=moises.veleta@intel.com \
--cc=muralidharan.sethuraman@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pierre-louis.bossart@intel.com \
--cc=ryazanov.s.a@gmail.com \
--cc=sreehari.kancharla@intel.com \
--cc=suresh.nagaraj@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).