[PATCH AUTOSEL 4.14 10/39] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

[PATCH AUTOSEL 4.14 10/39] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ]

We currently handle changing from the P2P to the STATION virtual
interface type slightly different than changing from P2P to ADHOC: When
changing to STATION, we don't send the SET_BSS_MODE command. We do send
that command on all other type-changes though, and it probably makes
sense to send the command since after all we just changed our BSS_MODE.
Looking at prior changes to this part of the code, it seems that this is
simply a leftover from old refactorings.

Since sending the SET_BSS_MODE command is the only difference between
mwifiex_change_vif_to_sta_adhoc() and the current code, we can now use
mwifiex_change_vif_to_sta_adhoc() for both switching to ADHOC and
STATION interface type.

This does not fix any particular bug and just "looked right", so there's
a small chance it might be a regression.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210914195909.36035-4-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/marvell/mwifiex/cfg80211.c   | 22 ++++---------------
 1 file changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 79c50aebffc4b..7bdcbe79d963d 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1217,29 +1217,15 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
+		if (mwifiex_cfg80211_deinit_p2p(priv))
+			return -EFAULT;
+
 		switch (type) {
-		case NL80211_IFTYPE_STATION:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
-				return -EFAULT;
-			priv->adapter->curr_iface_comb.p2p_intf--;
-			priv->adapter->curr_iface_comb.sta_intf++;
-			dev->ieee80211_ptr->iftype = type;
-			if (mwifiex_deinit_priv_params(priv))
-				return -1;
-			if (mwifiex_init_new_priv_params(priv, dev, type))
-				return -1;
-			if (mwifiex_sta_init_cmd(priv, false, false))
-				return -1;
-			break;
 		case NL80211_IFTYPE_ADHOC:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
-				return -EFAULT;
+		case NL80211_IFTYPE_STATION:
 			return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype,
 							       type, params);
-			break;
 		case NL80211_IFTYPE_AP:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
-				return -EFAULT;
 			return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
 							params);
 		case NL80211_IFTYPE_UNSPECIFIED:
-- 
2.33.0

[PATCH AUTOSEL 4.14 11/39] mwifiex: Properly initialize private structure on interface type changes

[Sasha Levin]

From: Jonas Dreßler <verdre@v0yd.nl>

[ Upstream commit c606008b70627a2fc485732a53cc22f0f66d0981 ]

When creating a new virtual interface in mwifiex_add_virtual_intf(), we
update our internal driver states like bss_type, bss_priority, bss_role
and bss_mode to reflect the mode the firmware will be set to.

When switching virtual interface mode using
mwifiex_init_new_priv_params() though, we currently only update bss_mode
and bss_role. In order for the interface mode switch to actually work,
we also need to update bss_type to its proper value, so do that.

This fixes a crash of the firmware (because the driver tries to execute
commands that are invalid in AP mode) when switching from station mode
to AP mode.

Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210914195909.36035-9-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 7bdcbe79d963d..a88bddc383894 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -898,16 +898,20 @@ mwifiex_init_new_priv_params(struct mwifiex_private *priv,
 	switch (type) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
-		priv->bss_role =  MWIFIEX_BSS_ROLE_STA;
+		priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+		priv->bss_type = MWIFIEX_BSS_TYPE_STA;
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
-		priv->bss_role =  MWIFIEX_BSS_ROLE_STA;
+		priv->bss_role = MWIFIEX_BSS_ROLE_STA;
+		priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
 		break;
 	case NL80211_IFTYPE_P2P_GO:
-		priv->bss_role =  MWIFIEX_BSS_ROLE_UAP;
+		priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+		priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
 		break;
 	case NL80211_IFTYPE_AP:
 		priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+		priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
 		break;
 	default:
 		mwifiex_dbg(adapter, ERROR,
-- 
2.33.0

[PATCH AUTOSEL 4.14 22/39] ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit 4b6012a7830b813799a7faf40daa02a837e0fd5b ]

kzalloc() is used to allocate memory for cd->detectors, and if it fails,
channel_detector_exit() behind the label fail will be called:
  channel_detector_exit(dpd, cd);

In channel_detector_exit(), cd->detectors is dereferenced through:
  struct pri_detector *de = cd->detectors[i];

To fix this possible null-pointer dereference, check cd->detectors before
the for loop to dereference cd->detectors.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210805153854.154066-1-islituo@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/dfs_pattern_detector.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index 78146607f16e8..acd85e5069346 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -182,10 +182,12 @@ static void channel_detector_exit(struct dfs_pattern_detector *dpd,
 	if (cd == NULL)
 		return;
 	list_del(&cd->head);
-	for (i = 0; i < dpd->num_radar_types; i++) {
-		struct pri_detector *de = cd->detectors[i];
-		if (de != NULL)
-			de->exit(de);
+	if (cd->detectors) {
+		for (i = 0; i < dpd->num_radar_types; i++) {
+			struct pri_detector *de = cd->detectors[i];
+			if (de != NULL)
+				de->exit(de);
+		}
 	}
 	kfree(cd->detectors);
 	kfree(cd);
-- 
2.33.0

[PATCH AUTOSEL 4.14 29/39] mwl8k: Fix use-after-free in mwl8k_fw_state_machine()

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 257051a235c17e33782b6e24a4b17f2d7915aaec ]

When the driver fails to request the firmware, it calls its error
handler. In the error handler, the driver detaches device from driver
first before releasing the firmware, which can cause a use-after-free bug.

Fix this by releasing firmware first.

The following log reveals it:

[    9.007301 ] BUG: KASAN: use-after-free in mwl8k_fw_state_machine+0x320/0xba0
[    9.010143 ] Workqueue: events request_firmware_work_func
[    9.010830 ] Call Trace:
[    9.010830 ]  dump_stack_lvl+0xa8/0xd1
[    9.010830 ]  print_address_description+0x87/0x3b0
[    9.010830 ]  kasan_report+0x172/0x1c0
[    9.010830 ]  ? mutex_unlock+0xd/0x10
[    9.010830 ]  ? mwl8k_fw_state_machine+0x320/0xba0
[    9.010830 ]  ? mwl8k_fw_state_machine+0x320/0xba0
[    9.010830 ]  __asan_report_load8_noabort+0x14/0x20
[    9.010830 ]  mwl8k_fw_state_machine+0x320/0xba0
[    9.010830 ]  ? mwl8k_load_firmware+0x5f0/0x5f0
[    9.010830 ]  request_firmware_work_func+0x172/0x250
[    9.010830 ]  ? read_lock_is_recursive+0x20/0x20
[    9.010830 ]  ? process_one_work+0x7a1/0x1100
[    9.010830 ]  ? request_firmware_nowait+0x460/0x460
[    9.010830 ]  ? __this_cpu_preempt_check+0x13/0x20
[    9.010830 ]  process_one_work+0x9bb/0x1100

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634356979-6211-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwl8k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/mwl8k.c b/drivers/net/wireless/marvell/mwl8k.c
index e39aaee92addb..d5f766044221a 100644
--- a/drivers/net/wireless/marvell/mwl8k.c
+++ b/drivers/net/wireless/marvell/mwl8k.c
@@ -5788,8 +5788,8 @@ static void mwl8k_fw_state_machine(const struct firmware *fw, void *context)
 fail:
 	priv->fw_state = FW_STATE_ERROR;
 	complete(&priv->firmware_loading_complete);
-	device_release_driver(&priv->pdev->dev);
 	mwl8k_release_firmware(priv);
+	device_release_driver(&priv->pdev->dev);
 }
 
 #define MAX_RESTART_ATTEMPTS 1
-- 
2.33.0

[PATCH AUTOSEL 4.14 31/39] iwlwifi: mvm: disable RX-diversity in powersave

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit e5322b9ab5f63536c41301150b7ce64605ce52cc ]

Just like we have default SMPS mode as dynamic in powersave,
we should not enable RX-diversity in powersave, to reduce
power consumption when connected to a non-MIMO AP.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.fc896bc5cdaa.I1d11da71b8a5cbe921a37058d5f578f1b14a2023@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
index d2cada0ab4264..3303fc85d76f5 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c
@@ -1029,6 +1029,9 @@ bool iwl_mvm_rx_diversity_allowed(struct iwl_mvm *mvm)
 
 	lockdep_assert_held(&mvm->mutex);
 
+	if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM)
+		return false;
+
 	if (num_of_ant(iwl_mvm_get_valid_rx_ant(mvm)) == 1)
 		return false;
 
-- 
2.33.0

Re: [PATCH AUTOSEL 4.14 10/39] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

[Brian Norris]

On Mon, Nov 8, 2021 at 5:18 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Jonas Dreßler <verdre@v0yd.nl>
>
> [ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ]
...
> This does not fix any particular bug and just "looked right", so there's
> a small chance it might be a regression.

I won't insist on rejecting this one, but especially given this
sentence, this doesn't really pass the smell test for -stable
candidates. It's stuff like this that pushes me a bit toward the camp
of those who despise the ML-based selection methods here, even though
it occasionally (or even often) may produce some good.

Brian

Re: [PATCH AUTOSEL 4.14 10/39] mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type

[Sasha Levin]

On Tue, Nov 09, 2021 at 10:06:19AM -0800, Brian Norris wrote:
>On Mon, Nov 8, 2021 at 5:18 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Jonas Dreßler <verdre@v0yd.nl>
>>
>> [ Upstream commit c2e9666cdffd347460a2b17988db4cfaf2a68fb9 ]
>...
>> This does not fix any particular bug and just "looked right", so there's
>> a small chance it might be a regression.
>
>I won't insist on rejecting this one, but especially given this
>sentence, this doesn't really pass the smell test for -stable
>candidates. It's stuff like this that pushes me a bit toward the camp
>of those who despise the ML-based selection methods here, even though
>it occasionally (or even often) may produce some good.

I have hundreds of examples of patches that claim they are just an
improvement but fix a serious bug :)

-- 
Thanks,
Sasha