From: Felix Fietkau <nbd@nbd.name>
To: linux-wireless@vger.kernel.org
Cc: johannes@sipsolutions.net
Subject: [PATCH] mac80211: add support for .ndo_fill_forward_path
Date: Fri, 12 Nov 2021 12:22:23 +0100 [thread overview]
Message-ID: <20211112112223.1209-1-nbd@nbd.name> (raw)
This allows drivers to provide a destination device + info for flow offload
Only supported in combination with 802.3 encap offload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
include/net/mac80211.h | 7 +++++
net/mac80211/driver-ops.h | 22 ++++++++++++++
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/iface.c | 61 ++++++++++++++++++++++++++++++++++++++
net/mac80211/trace.h | 7 +++++
5 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 775dbb982654..10e6fe215f0f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3952,6 +3952,8 @@ struct ieee80211_prep_tx_info {
* radar channel.
* The caller is expected to set chandef pointer to NULL in order to
* disable offchannel CAC/radar detection.
+ * @net_fill_forward_path: Called from .ndo_fill_forward_path in order to
+ * resolve a path for hardware flow offloading
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -4282,6 +4284,11 @@ struct ieee80211_ops {
struct ieee80211_sta *sta, u8 flowid);
int (*set_radar_offchan)(struct ieee80211_hw *hw,
struct cfg80211_chan_def *chandef);
+ int (*net_fill_forward_path)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct net_device_path_ctx *ctx,
+ struct net_device_path *path);
};
/**
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index cd3731cbf6c6..50a0cdadceec 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -1483,4 +1483,26 @@ static inline void drv_twt_teardown_request(struct ieee80211_local *local,
trace_drv_return_void(local);
}
+static inline int drv_net_fill_forward_path(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta *sta,
+ struct net_device_path_ctx *ctx,
+ struct net_device_path *path)
+{
+ int ret = -EOPNOTSUPP;
+
+ sdata = get_bss_sdata(sdata);
+ if (!check_sdata_in_driver(sdata))
+ return -EIO;
+
+ trace_drv_net_fill_forward_path(local, sdata, sta);
+ if (local->ops->net_fill_forward_path)
+ ret = local->ops->net_fill_forward_path(&local->hw,
+ &sdata->vif, sta,
+ ctx, path);
+ trace_drv_return_int(local, ret);
+
+ return ret;
+}
+
#endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 5666bbb8860b..08c0542c93a3 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1463,7 +1463,7 @@ struct ieee80211_local {
};
static inline struct ieee80211_sub_if_data *
-IEEE80211_DEV_TO_SUB_IF(struct net_device *dev)
+IEEE80211_DEV_TO_SUB_IF(const struct net_device *dev)
{
return netdev_priv(dev);
}
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 9a2145c8192b..6012442cd0d6 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -789,6 +789,66 @@ static const struct net_device_ops ieee80211_monitorif_ops = {
.ndo_get_stats64 = ieee80211_get_stats64,
};
+
+static int ieee80211_netdev_fill_forward_path(struct net_device_path_ctx *ctx,
+ struct net_device_path *path)
+{
+ struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_local *local;
+ struct sta_info *sta;
+ int ret = -ENOENT;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(ctx->dev);
+ local = sdata->local;
+
+ if (!local->ops->net_fill_forward_path)
+ return -EOPNOTSUPP;
+
+ rcu_read_lock();
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_AP_VLAN:
+ sta = rcu_dereference(sdata->u.vlan.sta);
+ if (sta)
+ break;
+ if (sdata->wdev.use_4addr)
+ goto out;
+ if (is_multicast_ether_addr(ctx->daddr))
+ goto out;
+ sta = sta_info_get_bss(sdata, ctx->daddr);
+ break;
+ case NL80211_IFTYPE_AP:
+ if (is_multicast_ether_addr(ctx->daddr))
+ goto out;
+ sta = sta_info_get(sdata, ctx->daddr);
+ break;
+ case NL80211_IFTYPE_STATION:
+ if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) {
+ sta = sta_info_get(sdata, ctx->daddr);
+ if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) {
+ if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
+ goto out;
+
+ break;
+ }
+ }
+
+ sta = sta_info_get(sdata, sdata->u.mgd.bssid);
+ break;
+ default:
+ goto out;
+ }
+
+ if (!sta)
+ goto out;
+
+ ret = drv_net_fill_forward_path(local, sdata, &sta->sta, ctx, path);
+out:
+ rcu_read_unlock();
+
+ return ret;
+}
+
+
static const struct net_device_ops ieee80211_dataif_8023_ops = {
.ndo_open = ieee80211_open,
.ndo_stop = ieee80211_stop,
@@ -798,6 +858,7 @@ static const struct net_device_ops ieee80211_dataif_8023_ops = {
.ndo_set_mac_address = ieee80211_change_mac,
.ndo_select_queue = ieee80211_netdev_select_queue,
.ndo_get_stats64 = ieee80211_get_stats64,
+ .ndo_fill_forward_path = ieee80211_netdev_fill_forward_path,
};
static bool ieee80211_iftype_supports_hdr_offload(enum nl80211_iftype iftype)
diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h
index 9e8381bef7ed..d91498f77796 100644
--- a/net/mac80211/trace.h
+++ b/net/mac80211/trace.h
@@ -2892,6 +2892,13 @@ TRACE_EVENT(drv_twt_teardown_request,
)
);
+DEFINE_EVENT(sta_event, drv_net_fill_forward_path,
+ TP_PROTO(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta *sta),
+ TP_ARGS(local, sdata, sta)
+);
+
#endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
#undef TRACE_INCLUDE_PATH
--
2.30.1
next reply other threads:[~2021-11-12 11:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-12 11:22 Felix Fietkau [this message]
2021-11-15 13:33 ` [PATCH] mac80211: add support for .ndo_fill_forward_path Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211112112223.1209-1-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).