From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Alexander Aring <alex.aring@gmail.com>,
Stefan Schmidt <stefan@datenfreihafen.org>,
linux-wpan@vger.kernel.org
Cc: netdev@vger.kernel.org, linux-wireless@vger.kernel.org,
David Girault <david.girault@qorvo.com>,
Romuald Despres <romuald.despres@qorvo.com>,
Frederic Blain <frederic.blain@qorvo.com>,
Nicolas Schodet <nico@ni.fr.eu.org>,
Michael Hennerich <michael.hennerich@analog.com>,
Jakub Kicinski <kuba@kernel.org>,
Varka Bhadram <varkabhadram@gmail.com>,
Xue Liu <liuxuenetmail@gmail.com>, Alan Ott <alan@signal11.us>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH v3 00/41] IEEE 802.15.4 scan support
Date: Mon, 17 Jan 2022 12:53:59 +0100 [thread overview]
Message-ID: <20220117115440.60296-1-miquel.raynal@bootlin.com> (raw)
Hello,
*** TLDR ***
Here is a series attempting to bring support for scans in the
IEEE 802.15.4 stack. A number of improvements had to be made, including:
* a better handling of the symbol durations
* a few changes in Kconfig
* a better handling of the tx queues
* a synchronous Tx API
Active and passive scans can be locally tested only with hwsim.
Sorry for the big series, might be split in the near future.
************
A second series aligning the tooling with these changes is related,
bringing support for a number of new features such as:
* Sending (or stopping) beacons. Intervals ranging from 0 to 14 are
valid for passively sending beacons at regular intervals. An interval
of 15 would request the core to answer to received BEACON_REQ.
# iwpan dev wpan0 beacons send interval 2 # send BEACON at a fixed rate
# iwpan dev wpan0 beacons send interval 15 # answer BEACON_REQ only
# iwpan dev wpan0 beacons stop # apply to both cases
* Scanning all the channels or only a subset:
# iwpan dev wpan1 scan type passive duration 3 # will not trigger BEACON_REQ
# iwpan dev wpan1 scan type active duration 3 # will trigger BEACON_REQ
* If a beacon is received during a scan, the internal PAN list is
updated and can be dumped, flushed and configured with:
# iwpan dev wpan1 pans dump
PAN 0xffff (on wpan1)
coordinator 0x2efefdd4cdbf9330
page 0
channel 13
superframe spec. 0xcf22
LQI 0
seen 7156ms ago
# iwpan dev wpan1 pans flush
# iwpan dev wpan1 set max_pan_entries 100
# iwpan dev wpan1 set pans_expiration 3600
* It is also possible to monitor the events with:
# iwpan event
* As well as triggering a non blocking scan:
# iwpan dev wpan1 scan trigger type passive duration 3
# iwpan dev wpan1 scan done
# iwpan dev wpan1 scan abort
The PAN list gets automatically updated by dropping the expired PANs
each time the user requests access to the list.
Internally, both requests (scan/beacons) are handled periodically by
delayed workqueues when relevant.
So far the only technical point that is missing in this series is the
possibility to grab a reference over the module driving the net device
in order to prevent module unloading during a scan or when the beacons
work is ongoing.
Finally, this series is a deep reshuffle of David Girault's original
work, hence the fact that he is almost systematically credited, either
by being the only author when I created the patches based on his changes
with almost no modification, or with a Co-developped-by tag whenever the
final code base is significantly different than his first proposal while
still being greatly inspired from it.
Cheers,
Miquèl
Changes in v3:
* Dropped two patches:
net: mac802154: Split the set channel hook implementation
net: mac802154: Ensure proper channel selection at probe time
* Fixed a check against the supported channels list in
ieee802154_set_symbol_duration().
* Reworded a bit the above helper to print different error messages and
dropped the goto statement in it.
* Used the NSEC_PER_USEC macro in the symbol conversion from us to ns.
* Stopped calling ->set_channel() at probe time.
* Fixed hwsim which does not internally set the right channel.
* Used definitions instead of hardcoded values when relevant.
* Moved two helpers out of the experimental section because they are now
used outside of experimental code.
* Did a number of renames. Added a couple of comments.
* Updated several drivers to force them to use the core xmit complete
callback instead of workarounding it.
* Created a helper checking if a queue must be kept on hold.
* Created a couple of atomic variables and wait_queue_t per phy.
* Created a sync API for MLME transmissions.
* Created a hot path and a slow path.
* Put the warning in the hot path.
* Added a flag to prevent drivers supporting only datagrams to use the
different scanning features.
* Dropped ieee802154_wake/stop_queue() from the exported
symbols. Drivers should not use these directly, but call other helpers
in order to fail the tx counters.
Changes in v2:
* Create two new netlink commands to set the maximum number of PANs that
can be listed as well as their expiration time (in seconds).
* Added a patch to the series to avoid ignoring bad frames in hwsim as
requested by Alexander.
* Changed the symbol duration type to receive nanoseconds instead of
microseconds.
* Dropped most of the hwsim patches and reworked how drivers advertise
their channels in order to be capable of deriving the symbol durations
automatically.
* The scanning boolean gets turned into an atomic.
* The ca8210 driver does not support scanning, implement the driver
hooks to reflect the situation.
* Reworked a bit the content of each patch to ease the introduction of
active scans.
* Added active scan support.
David Girault (5):
net: ieee802154: Move IEEE 802.15.4 Kconfig main entry
net: mac802154: Include the softMAC stack inside the IEEE 802.15.4
menu
net: ieee802154: Move the address structure earlier
net: ieee802154: Add a kernel doc header to the ieee802154_addr
structure
net: ieee802154: Trace the registration of new PANs
Miquel Raynal (36):
MAINTAINERS: Remove Harry Morris bouncing address
net: ieee802154: hwsim: Ensure proper channel selection at probe time
net: ieee802154: hwsim: Ensure frame checksum are valid
net: ieee802154: Use the IEEE802154_MAX_PAGE define when relevant
net: ieee802154: Improve the way supported channels are declared
net: ieee802154: Give more details to the core about the channel
configurations
net: ieee802154: mcr20a: Fix lifs/sifs periods
net: mac802154: Convert the symbol duration into nanoseconds
net: mac802154: Set the symbol duration automatically
net: ieee802154: Drop duration settings when the core does it already
net: ieee802154: Return meaningful error codes from the netlink
helpers
net: mac802154: Explain the use of ieee802154_wake/stop_queue()
net: ieee802154: at86rf230: Call the complete helper when a
transmission is over
net: ieee802154: atusb: Call the complete helper when a transmission
is over
net: ieee802154: ca8210: Call the complete helper when a transmission
is over
net: mac802154: Stop exporting ieee802154_wake/stop_queue()
net: mac802154: Rename the synchronous xmit worker
net: mac802154: Rename the main tx_work struct
net: mac802154: Follow the count of ongoing transmissions
net: mac802154: Hold the transmit queue when relevant
net: mac802154: Create a hot tx path
net: mac802154: Add a warning in the hot path
net: mac802154: Introduce a tx queue flushing mechanism
net: mac802154: Introduce a synchronous API for MLME commands
net: ieee802154: Add support for internal PAN management
net: ieee802154: Define a beacon frame header
net: ieee802154: Define frame types
net: ieee802154: Add support for scanning requests
net: mac802154: Handle scan requests
net: ieee802154: Full PAN management
net: ieee802154: Add beacons support
net: mac802154: Handle beacons requests
net: mac802154: Add support for active scans
net: mac802154: Add support for processing beacon requests
net: ieee802154: Handle limited devices with only datagram support
net: ieee802154: ca8210: Flag the driver as being limited
MAINTAINERS | 3 +-
drivers/net/ieee802154/adf7242.c | 3 +-
drivers/net/ieee802154/at86rf230.c | 68 ++-
drivers/net/ieee802154/atusb.c | 89 ++--
drivers/net/ieee802154/ca8210.c | 17 +-
drivers/net/ieee802154/cc2520.c | 3 +-
drivers/net/ieee802154/fakelb.c | 43 +-
drivers/net/ieee802154/mac802154_hwsim.c | 88 +++-
drivers/net/ieee802154/mcr20a.c | 11 +-
drivers/net/ieee802154/mrf24j40.c | 3 +-
include/linux/ieee802154.h | 7 +
include/net/cfg802154.h | 175 ++++++-
include/net/ieee802154_netdev.h | 85 ++++
include/net/mac802154.h | 29 +-
include/net/nl802154.h | 99 ++++
net/Kconfig | 3 +-
net/ieee802154/Kconfig | 1 +
net/ieee802154/Makefile | 2 +-
net/ieee802154/core.c | 3 +
net/ieee802154/core.h | 31 ++
net/ieee802154/header_ops.c | 67 +++
net/ieee802154/nl-phy.c | 13 +-
net/ieee802154/nl802154.c | 556 ++++++++++++++++++++++-
net/ieee802154/nl802154.h | 4 +
net/ieee802154/pan.c | 234 ++++++++++
net/ieee802154/rdev-ops.h | 52 +++
net/ieee802154/trace.h | 86 ++++
net/mac802154/Makefile | 2 +-
net/mac802154/cfg.c | 82 +++-
net/mac802154/ieee802154_i.h | 86 +++-
net/mac802154/main.c | 119 ++++-
net/mac802154/rx.c | 34 +-
net/mac802154/scan.c | 447 ++++++++++++++++++
net/mac802154/tx.c | 48 +-
net/mac802154/util.c | 38 +-
35 files changed, 2413 insertions(+), 218 deletions(-)
create mode 100644 net/ieee802154/pan.c
create mode 100644 net/mac802154/scan.c
--
2.27.0
next reply other threads:[~2022-01-17 11:54 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-17 11:53 Miquel Raynal [this message]
2022-01-17 11:54 ` [PATCH v3 01/41] MAINTAINERS: Remove Harry Morris bouncing address Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 02/41] net: ieee802154: hwsim: Ensure proper channel selection at probe time Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 03/41] net: ieee802154: hwsim: Ensure frame checksum are valid Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 04/41] net: ieee802154: Use the IEEE802154_MAX_PAGE define when relevant Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 05/41] net: ieee802154: Improve the way supported channels are declared Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 06/41] net: ieee802154: Give more details to the core about the channel configurations Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 07/41] net: ieee802154: mcr20a: Fix lifs/sifs periods Miquel Raynal
2022-01-17 22:52 ` Alexander Aring
2022-01-18 18:20 ` Miquel Raynal
2022-01-18 22:53 ` Alexander Aring
2022-01-17 11:54 ` [PATCH v3 08/41] net: mac802154: Convert the symbol duration into nanoseconds Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 09/41] net: mac802154: Set the symbol duration automatically Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 10/41] net: ieee802154: Drop duration settings when the core does it already Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 11/41] net: ieee802154: Move IEEE 802.15.4 Kconfig main entry Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 12/41] net: mac802154: Include the softMAC stack inside the IEEE 802.15.4 menu Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 13/41] net: ieee802154: Move the address structure earlier Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 14/41] net: ieee802154: Add a kernel doc header to the ieee802154_addr structure Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 15/41] net: ieee802154: Return meaningful error codes from the netlink helpers Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 16/41] net: mac802154: Explain the use of ieee802154_wake/stop_queue() Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 17/41] net: ieee802154: at86rf230: Call the complete helper when a transmission is over Miquel Raynal
2022-01-17 22:58 ` Alexander Aring
2022-01-18 0:34 ` Alexander Aring
2022-01-18 0:36 ` Alexander Aring
2022-01-18 18:22 ` Miquel Raynal
2022-01-19 22:45 ` Miquel Raynal
2022-01-19 22:56 ` Miquel Raynal
2022-01-19 23:34 ` Alexander Aring
2022-01-20 0:19 ` Alexander Aring
2022-01-17 11:54 ` [PATCH v3 18/41] net: ieee802154: atusb: " Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 19/41] net: ieee802154: ca8210: " Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 20/41] net: mac802154: Stop exporting ieee802154_wake/stop_queue() Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 21/41] net: mac802154: Rename the synchronous xmit worker Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 22/41] net: mac802154: Rename the main tx_work struct Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 23/41] net: mac802154: Follow the count of ongoing transmissions Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 24/41] net: mac802154: Hold the transmit queue when relevant Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 25/41] net: mac802154: Create a hot tx path Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 26/41] net: mac802154: Add a warning in the hot path Miquel Raynal
2022-01-17 23:14 ` Alexander Aring
2022-01-18 18:20 ` Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 27/41] net: mac802154: Introduce a tx queue flushing mechanism Miquel Raynal
2022-01-17 22:43 ` Alexander Aring
2022-01-18 18:14 ` Miquel Raynal
2022-01-18 23:16 ` Alexander Aring
2022-01-17 11:54 ` [PATCH v3 28/41] net: mac802154: Introduce a synchronous API for MLME commands Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 29/41] net: ieee802154: Add support for internal PAN management Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 30/41] net: ieee802154: Define a beacon frame header Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 31/41] net: ieee802154: Define frame types Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 32/41] net: ieee802154: Add support for scanning requests Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 33/41] net: mac802154: Handle scan requests Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 34/41] net: ieee802154: Full PAN management Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 35/41] net: ieee802154: Add beacons support Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 36/41] net: mac802154: Handle beacons requests Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 37/41] net: ieee802154: Trace the registration of new PANs Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 38/41] net: mac802154: Add support for active scans Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 39/41] net: mac802154: Add support for processing beacon requests Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 40/41] net: ieee802154: Handle limited devices with only datagram support Miquel Raynal
2022-01-17 11:54 ` [PATCH v3 41/41] net: ieee802154: ca8210: Flag the driver as being limited Miquel Raynal
2022-01-17 23:02 ` [PATCH v3 00/41] IEEE 802.15.4 scan support Alexander Aring
2022-01-18 10:40 ` Miquel Raynal
2022-01-18 23:12 ` Alexander Aring
2022-01-20 0:24 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220117115440.60296-1-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=alan@signal11.us \
--cc=alex.aring@gmail.com \
--cc=david.girault@qorvo.com \
--cc=frederic.blain@qorvo.com \
--cc=kuba@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linux-wpan@vger.kernel.org \
--cc=liuxuenetmail@gmail.com \
--cc=michael.hennerich@analog.com \
--cc=netdev@vger.kernel.org \
--cc=nico@ni.fr.eu.org \
--cc=romuald.despres@qorvo.com \
--cc=stefan@datenfreihafen.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=varkabhadram@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).