linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Baochen Qiang <quic_bqiang@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v4 1/2] ath11k: add support for extended wmi service bit
Date: Fri, 1 Apr 2022 20:09:47 +0800	[thread overview]
Message-ID: <20220401120948.1312956-2-quic_bqiang@quicinc.com> (raw)
In-Reply-To: <20220401120948.1312956-1-quic_bqiang@quicinc.com>

From: Wen Gong <quic_wgong@quicinc.com>

Currently the wmi service bis is report from firmware, it is divided
to 128 bits for each segment. The first segment is processed by
ath11k_wmi_service_bitmap_copy(), the second segment is processed by
ath11k_service_available_event() with WMI_TAG_SERVICE_AVAILABLE_EVENT,
When the service bit exceed 256 bits, then firmware report it by tag
WMI_TAG_ARRAY_UINT32 in WMI_SERVICE_AVAILABLE_EVENTID.

ath11k does not process the third segment, this is to extend the wmi
service bits from 256 to 384 for the third 128 bits. The 3 enum value
WMI_MAX_SERVICE(128)/WMI_MAX_EXT_SERVICE(256)/WMI_MAX_EXT2_SERVICE(384)
are convenient to process the service bits.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 81 ++++++++++++++++-----------
 drivers/net/wireless/ath/ath11k/wmi.h |  9 ++-
 2 files changed, 56 insertions(+), 34 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 3af24b18204e..a5876e0378fe 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -7297,47 +7297,64 @@ static void ath11k_vdev_install_key_compl_event(struct ath11k_base *ab,
 	rcu_read_unlock();
 }
 
-static void ath11k_service_available_event(struct ath11k_base *ab, struct sk_buff *skb)
+static int  ath11k_wmi_tlv_services_parser(struct ath11k_base *ab,
+					   u16 tag, u16 len,
+					   const void *ptr, void *data)
 {
-	const void **tb;
 	const struct wmi_service_available_event *ev;
-	int ret;
+	u32 *wmi_ext2_service_bitmap;
 	int i, j;
 
-	tb = ath11k_wmi_tlv_parse_alloc(ab, skb->data, skb->len, GFP_ATOMIC);
-	if (IS_ERR(tb)) {
-		ret = PTR_ERR(tb);
-		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
-		return;
-	}
+	switch (tag) {
+	case WMI_TAG_SERVICE_AVAILABLE_EVENT:
+		ev = (struct wmi_service_available_event *)ptr;
+		for (i = 0, j = WMI_MAX_SERVICE;
+			i < WMI_SERVICE_SEGMENT_BM_SIZE32 && j < WMI_MAX_EXT_SERVICE;
+			i++) {
+			do {
+				if (ev->wmi_service_segment_bitmap[i] &
+				    BIT(j % WMI_AVAIL_SERVICE_BITS_IN_SIZE32))
+					set_bit(j, ab->wmi_ab.svc_map);
+			} while (++j % WMI_AVAIL_SERVICE_BITS_IN_SIZE32);
+		}
 
-	ev = tb[WMI_TAG_SERVICE_AVAILABLE_EVENT];
-	if (!ev) {
-		ath11k_warn(ab, "failed to fetch svc available ev");
-		kfree(tb);
-		return;
-	}
+		ath11k_dbg(ab, ATH11K_DBG_WMI,
+			   "wmi_ext_service_bitmap 0:0x%04x, 1:0x%04x, 2:0x%04x, 3:0x%04x",
+			   ev->wmi_service_segment_bitmap[0],
+			   ev->wmi_service_segment_bitmap[1],
+			   ev->wmi_service_segment_bitmap[2],
+			   ev->wmi_service_segment_bitmap[3]);
+		break;
+	case WMI_TAG_ARRAY_UINT32:
+		wmi_ext2_service_bitmap = (u32 *)ptr;
+		for (i = 0, j = WMI_MAX_EXT_SERVICE;
+			i < WMI_SERVICE_SEGMENT_BM_SIZE32 && j < WMI_MAX_EXT2_SERVICE;
+			i++) {
+			do {
+				if (wmi_ext2_service_bitmap[i] &
+				    BIT(j % WMI_AVAIL_SERVICE_BITS_IN_SIZE32))
+					set_bit(j, ab->wmi_ab.svc_map);
+			} while (++j % WMI_AVAIL_SERVICE_BITS_IN_SIZE32);
+		}
 
-	/* TODO: Use wmi_service_segment_offset information to get the service
-	 * especially when more services are advertised in multiple sevice
-	 * available events.
-	 */
-	for (i = 0, j = WMI_MAX_SERVICE;
-	     i < WMI_SERVICE_SEGMENT_BM_SIZE32 && j < WMI_MAX_EXT_SERVICE;
-	     i++) {
-		do {
-			if (ev->wmi_service_segment_bitmap[i] &
-			    BIT(j % WMI_AVAIL_SERVICE_BITS_IN_SIZE32))
-				set_bit(j, ab->wmi_ab.svc_map);
-		} while (++j % WMI_AVAIL_SERVICE_BITS_IN_SIZE32);
+		ath11k_dbg(ab, ATH11K_DBG_WMI,
+			   "wmi_ext2_service__bitmap  0:0x%04x, 1:0x%04x, 2:0x%04x, 3:0x%04x",
+			   wmi_ext2_service_bitmap[0], wmi_ext2_service_bitmap[1],
+			   wmi_ext2_service_bitmap[2], wmi_ext2_service_bitmap[3]);
+		break;
 	}
+	return 0;
+}
 
-	ath11k_dbg(ab, ATH11K_DBG_WMI,
-		   "wmi_ext_service_bitmap 0:0x%x, 1:0x%x, 2:0x%x, 3:0x%x",
-		   ev->wmi_service_segment_bitmap[0], ev->wmi_service_segment_bitmap[1],
-		   ev->wmi_service_segment_bitmap[2], ev->wmi_service_segment_bitmap[3]);
+static void ath11k_service_available_event(struct ath11k_base *ab, struct sk_buff *skb)
+{
+	int ret;
 
-	kfree(tb);
+	ret = ath11k_wmi_tlv_iter(ab, skb->data, skb->len,
+				  ath11k_wmi_tlv_services_parser,
+				  NULL);
+	if (ret)
+		ath11k_warn(ab, "failed to parse services available tlv %d\n", ret);
 }
 
 static void ath11k_peer_assoc_conf_event(struct ath11k_base *ab, struct sk_buff *skb)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 925b8003feae..da9b0a90fd70 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -1992,6 +1992,7 @@ enum wmi_tlv_service {
 	WMI_TLV_SERVICE_ACK_TIMEOUT = 126,
 	WMI_TLV_SERVICE_PDEV_BSS_CHANNEL_INFO_64 = 127,
 
+	/* The first 128 bits */
 	WMI_MAX_SERVICE = 128,
 
 	WMI_TLV_SERVICE_CHAN_LOAD_INFO = 128,
@@ -2084,7 +2085,11 @@ enum wmi_tlv_service {
 	WMI_TLV_SERVICE_EXT2_MSG = 220,
 	WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT = 249,
 
-	WMI_MAX_EXT_SERVICE
+	/* The second 128 bits */
+	WMI_MAX_EXT_SERVICE = 256,
+
+	/* The third 128 bits */
+	WMI_MAX_EXT2_SERVICE = 384
 };
 
 enum {
@@ -5378,7 +5383,7 @@ struct ath11k_wmi_base {
 
 	struct completion service_ready;
 	struct completion unified_ready;
-	DECLARE_BITMAP(svc_map, WMI_MAX_EXT_SERVICE);
+	DECLARE_BITMAP(svc_map, WMI_MAX_EXT2_SERVICE);
 	wait_queue_head_t tx_credits_wq;
 	const struct wmi_peer_flags_map *peer_flags;
 	u32 num_mem_chunks;
-- 
2.25.1


  reply	other threads:[~2022-04-01 12:10 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-01 12:09 [PATCH v4 0/2] ath11k: Add support for SAR Baochen Qiang
2022-04-01 12:09 ` Baochen Qiang [this message]
2022-04-01 18:07   ` [PATCH v4 1/2] ath11k: add support for extended wmi service bit Jeff Johnson
2022-04-20 16:35     ` Kalle Valo
2022-04-21 15:04       ` Jeff Johnson
2022-04-23  9:27   ` Kalle Valo
2022-04-01 12:09 ` [PATCH v4 2/2] ath11k: Add support for SAR Baochen Qiang
2022-04-01 13:18   ` Kalle Valo
2022-04-01 19:06   ` Jeff Johnson
2022-04-20 16:35     ` Kalle Valo
2022-04-21 15:05       ` Jeff Johnson
2022-04-01 12:27 ` [PATCH v4 0/2] " Kalle Valo
2022-04-01 12:29   ` Baochen Qiang (QUIC)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220401120948.1312956-2-quic_bqiang@quicinc.com \
    --to=quic_bqiang@quicinc.com \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).