[PATCH 3/3] ath11k: mhi: remove unnecessary goto from ath11k_mhi_start()

[Kalle Valo <kvalo@kernel.org>]

From: Kalle Valo <quic_kvalo@quicinc.com>

No need to have goto for a return statement, so simplify the code. While at it,
print warning messages if power up calls fail.

No functional changes.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03003-QCAHSPSWPL_V1_V2_SILICONZ_LITE-2

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mhi.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index 706de7b0b4a1..a372ebb184a1 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -463,22 +463,24 @@ void ath11k_mhi_unregister(struct ath11k_pci *ab_pci)
 
 int ath11k_mhi_start(struct ath11k_pci *ab_pci)
 {
+	struct ath11k_base *ab = ab_pci->ab;
 	int ret;
 
 	ab_pci->mhi_ctrl->timeout_ms = MHI_TIMEOUT_DEFAULT_MS;
 
 	ret = mhi_prepare_for_power_up(ab_pci->mhi_ctrl);
-	if (ret)
-		goto out;
+	if (ret) {
+		ath11k_warn(ab, "failed to prepare mhi: %d", ret);
+		return ret;
+	}
 
 	ret = mhi_sync_power_up(ab_pci->mhi_ctrl);
-	if (ret)
-		goto out;
+	if (ret) {
+		ath11k_warn(ab, "failed to power up mhi: %d", ret);
+		return ret;
+	}
 
 	return 0;
-
-out:
-	return ret;
 }
 
 void ath11k_mhi_stop(struct ath11k_pci *ab_pci)
-- 
2.30.2