From: viktor.barna@celeno.com
To: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@codeaurora.org>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Aviad Brikman <aviad.brikman@celeno.com>,
Eliav Farber <eliav.farber@gmail.com>,
Maksym Kokhan <maksym.kokhan@celeno.com>,
Oleksandr Savchenko <oleksandr.savchenko@celeno.com>,
Shay Bar <shay.bar@celeno.com>,
Viktor Barna <viktor.barna@celeno.com>
Subject: [RFC v2 57/96] cl8k: add radio.h
Date: Tue, 24 May 2022 14:34:23 +0300 [thread overview]
Message-ID: <20220524113502.1094459-58-viktor.barna@celeno.com> (raw)
In-Reply-To: <20220524113502.1094459-1-viktor.barna@celeno.com>
From: Viktor Barna <viktor.barna@celeno.com>
(Part of the split. Please, take a look at the cover letter for more
details).
Signed-off-by: Viktor Barna <viktor.barna@celeno.com>
---
drivers/net/wireless/celeno/cl8k/radio.h | 130 +++++++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 drivers/net/wireless/celeno/cl8k/radio.h
diff --git a/drivers/net/wireless/celeno/cl8k/radio.h b/drivers/net/wireless/celeno/cl8k/radio.h
new file mode 100644
index 000000000000..b51dec5b7b1e
--- /dev/null
+++ b/drivers/net/wireless/celeno/cl8k/radio.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Copyright(c) 2019-2022, Celeno Communications Ltd. */
+
+#ifndef CL_RADIO_H
+#define CL_RADIO_H
+
+#define RADIO_STATUS_OFF 0
+#define RADIO_STATUS_ON 1
+#define RADIO_STATUS_GOING_DOWN 2
+
+int cl_radio_on(struct cl_hw *cl_hw);
+void cl_radio_off_chip(struct cl_chip *chip);
+void cl_radio_on_chip(struct cl_chip *chip);
+bool cl_radio_is_off(struct cl_hw *cl_hw);
+bool cl_radio_is_on(struct cl_hw *cl_hw);
+bool cl_radio_is_going_down(struct cl_hw *cl_hw);
+void cl_radio_on_start(struct cl_hw *cl_hw);
+int cl_radio_boot(struct cl_chip *chip);
+int cl_radio_boot_recovery(struct cl_hw *cl_hw);
+/* Wakes up cl_radio_off_kthread after all the stations have disconnected. */
+void cl_radio_off_wake_up(struct cl_hw *cl_hw);
+
+struct cl_noise_reg {
+ struct list_head list;
+ u32 np_prim20_per_ant;
+ u32 np_prim20_per_ant2;
+ u32 nasp_prim20_per_ant;
+ u32 nasp_prim20_per_ant2;
+ u32 np_sub20_per_chn;
+ u32 np_sub20_per_chn2;
+ u32 nasp_sub20_per_chn;
+ u32 nasp_sub20_per_chn2;
+ u32 np_sec20_dens_per_ant;
+ u32 nasp_sec20_dens_per_ant;
+};
+
+struct cl_noise_db {
+ struct list_head reg_list;
+ bool hist_record;
+ u8 active_ant;
+ u8 sample_cnt;
+};
+
+void cl_noise_init(struct cl_hw *cl_hw);
+void cl_noise_close(struct cl_hw *cl_hw);
+void cl_noise_maintenance(struct cl_hw *cl_hw);
+
+#define RX_HDR_RSSI(rxhdr) \
+ {(rxhdr)->rssi1, (rxhdr)->rssi2, (rxhdr)->rssi3, \
+ (rxhdr)->rssi4, (rxhdr)->rssi5, (rxhdr)->rssi6}
+
+struct cl_assoc_queue {
+ struct list_head list;
+ spinlock_t lock;
+};
+
+void cl_rssi_assoc_init(struct cl_hw *cl_hw);
+void cl_rssi_assoc_exit(struct cl_hw *cl_hw);
+void cl_rssi_assoc_handle(struct cl_hw *cl_hw, u8 *mac_addr, struct hw_rxhdr *rxhdr);
+void cl_rssi_assoc_find(struct cl_hw *cl_hw, struct cl_sta *cl_sta, u8 num_sta);
+void cl_rssi_sort_descending(s8 rssi[MAX_ANTENNAS], u8 num_ant);
+s8 cl_rssi_calc_equivalent(struct cl_hw *cl_hw, s8 rssi[MAX_ANTENNAS]);
+s8 cl_rssi_get_strongest(struct cl_hw *cl_hw, s8 rssi[MAX_ANTENNAS]);
+void cl_rssi_block_ack_handler(struct cl_hw *cl_hw, struct cl_sta *cl_sta,
+ struct cl_agg_tx_report *agg_report);
+void cl_rssi_rx_handler(struct cl_hw *cl_hw, struct cl_sta *cl_sta,
+ struct hw_rxhdr *rxhdr, s8 equivalent_rssi);
+void cl_rssi_bw_adjust(struct cl_hw *cl_hw, struct hw_rxhdr *rxhdr, s8 bw_factor);
+void cl_rssi_simulate(struct cl_hw *cl_hw, struct hw_rxhdr *rxhdr);
+
+/**
+ * CCA (=Clear Channel Assessment)
+ */
+
+struct cl_cca_db {
+ unsigned long time;
+};
+
+void cl_cca_maintenance(struct cl_hw *cl_hw);
+void cl_cca_init(struct cl_hw *cl_hw);
+
+/**
+ * Protection mode (RTS/CTS) control
+ */
+enum cl_txl_prot_mode {
+ TXL_NO_PROT,
+ TXL_PROT_RTS,
+ TXL_PROT_CTS,
+ TXL_PROT_RTS_FW,
+ TXL_PROT_CTS_FW,
+
+ TXL_PROT_MAX,
+};
+
+struct cl_prot_mode {
+ u8 current_val;
+ u8 default_val;
+ u8 dynamic_val;
+};
+
+void cl_prot_mode_init(struct cl_hw *cl_hw);
+void cl_prot_mode_set(struct cl_hw *cl_hw, u8 prot_mode_new);
+u8 cl_prot_mode_get(struct cl_hw *cl_hw);
+
+enum edca_ac {
+ EDCA_AC_BE,
+ EDCA_AC_BK,
+ EDCA_AC_VI,
+ EDCA_AC_VO,
+
+ EDCA_AC_MAX
+};
+
+struct edca_params {
+ u16 txop;
+ u8 cw_max;
+ u8 cw_min;
+ u8 aifsn;
+};
+
+struct cl_edca_db {
+ struct edca_params hw_params[AC_MAX];
+};
+
+void cl_edca_hw_conf(struct cl_hw *cl_hw);
+void cl_edca_set(struct cl_hw *cl_hw, u8 ac, struct edca_params *params,
+ struct ieee80211_he_mu_edca_param_ac_rec *mu_edca);
+void cl_edca_recovery(struct cl_hw *cl_hw);
+
+#endif /* CL_RADIO_H */
--
2.36.1
next prev parent reply other threads:[~2022-05-24 11:40 UTC|newest]
Thread overview: 125+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-24 11:33 [RFC v2 00/96] wireless: cl8k driver for Celeno IEEE 802.11ax devices viktor.barna
2022-05-24 11:33 ` [RFC v2 01/96] celeno: add Kconfig viktor.barna
2022-05-24 11:33 ` [RFC v2 02/96] celeno: add Makefile viktor.barna
2022-05-24 11:33 ` [RFC v2 03/96] cl8k: add Kconfig viktor.barna
2022-05-26 18:18 ` Johannes Berg
2022-05-27 6:09 ` Kalle Valo
2022-07-11 23:04 ` Viktor Barna
2022-07-13 7:32 ` Kalle Valo
2022-05-24 11:33 ` [RFC v2 04/96] cl8k: add Makefile viktor.barna
2022-05-26 18:24 ` Johannes Berg
2022-07-13 7:39 ` Kalle Valo
2022-05-24 11:33 ` [RFC v2 05/96] cl8k: add ampdu.c viktor.barna
2022-05-26 18:19 ` Johannes Berg
2022-05-26 18:22 ` Johannes Berg
2022-05-24 11:33 ` [RFC v2 06/96] cl8k: add ampdu.h viktor.barna
2022-05-24 11:33 ` [RFC v2 07/96] cl8k: add bf.c viktor.barna
2022-05-24 17:24 ` Jeff Johnson
2022-05-24 11:33 ` [RFC v2 08/96] cl8k: add bf.h viktor.barna
2022-05-24 11:33 ` [RFC v2 09/96] cl8k: add calib.c viktor.barna
2022-05-24 11:33 ` [RFC v2 10/96] cl8k: add calib.h viktor.barna
2022-05-24 11:33 ` [RFC v2 11/96] cl8k: add channel.c viktor.barna
2022-05-24 11:33 ` [RFC v2 12/96] cl8k: add channel.h viktor.barna
2022-05-24 11:33 ` [RFC v2 13/96] cl8k: add chip.c viktor.barna
2022-05-24 11:33 ` [RFC v2 14/96] cl8k: add chip.h viktor.barna
2022-05-24 11:33 ` [RFC v2 15/96] cl8k: add config.c viktor.barna
2022-05-24 11:33 ` [RFC v2 16/96] cl8k: add config.h viktor.barna
2022-05-25 18:31 ` Jeff Johnson
2022-05-24 11:33 ` [RFC v2 17/96] cl8k: add debug.c viktor.barna
2022-05-24 11:33 ` [RFC v2 18/96] cl8k: add debug.h viktor.barna
2022-05-24 11:33 ` [RFC v2 19/96] cl8k: add def.h viktor.barna
2022-05-25 18:39 ` Jeff Johnson
2022-05-24 11:33 ` [RFC v2 20/96] cl8k: add dfs.c viktor.barna
2022-05-24 11:33 ` [RFC v2 21/96] cl8k: add dfs.h viktor.barna
2022-05-24 11:33 ` [RFC v2 22/96] cl8k: add dsp.c viktor.barna
2022-05-24 11:33 ` [RFC v2 23/96] cl8k: add dsp.h viktor.barna
2022-05-24 11:33 ` [RFC v2 24/96] cl8k: add e2p.c viktor.barna
2022-05-24 11:33 ` [RFC v2 25/96] cl8k: add e2p.h viktor.barna
2022-05-24 11:33 ` [RFC v2 26/96] cl8k: add eeprom.h viktor.barna
2022-05-24 11:33 ` [RFC v2 27/96] cl8k: add ela.c viktor.barna
2022-05-24 11:33 ` [RFC v2 28/96] cl8k: add ela.h viktor.barna
2022-05-24 11:33 ` [RFC v2 29/96] cl8k: add enhanced_tim.c viktor.barna
2022-05-24 11:33 ` [RFC v2 30/96] cl8k: add enhanced_tim.h viktor.barna
2022-05-24 11:33 ` [RFC v2 31/96] cl8k: add fw.c viktor.barna
2022-05-24 11:33 ` [RFC v2 32/96] cl8k: add fw.h viktor.barna
2022-05-25 18:58 ` Jeff Johnson
2022-05-24 11:33 ` [RFC v2 33/96] cl8k: add hw.c viktor.barna
2022-05-24 11:34 ` [RFC v2 34/96] cl8k: add hw.h viktor.barna
2022-05-24 11:34 ` [RFC v2 35/96] cl8k: add ipc_shared.h viktor.barna
2022-05-24 11:34 ` [RFC v2 36/96] cl8k: add key.c viktor.barna
2022-05-26 19:38 ` Johannes Berg
2022-07-11 23:10 ` Viktor Barna
2022-05-24 11:34 ` [RFC v2 37/96] cl8k: add key.h viktor.barna
2022-05-24 11:34 ` [RFC v2 38/96] cl8k: add mac80211.c viktor.barna
2022-05-26 19:49 ` Johannes Berg
2022-07-11 23:13 ` Viktor Barna
2022-05-24 11:34 ` [RFC v2 39/96] cl8k: add mac80211.h viktor.barna
2022-05-26 19:52 ` Johannes Berg
2022-05-24 11:34 ` [RFC v2 40/96] cl8k: add mac_addr.c viktor.barna
2022-05-26 22:31 ` Jeff Johnson
2022-05-24 11:34 ` [RFC v2 41/96] cl8k: add mac_addr.h viktor.barna
2022-05-24 11:34 ` [RFC v2 42/96] cl8k: add main.c viktor.barna
2022-05-26 23:01 ` Jeff Johnson
2022-05-24 11:34 ` [RFC v2 43/96] cl8k: add main.h viktor.barna
2022-05-24 11:34 ` [RFC v2 44/96] cl8k: add maintenance.c viktor.barna
2022-05-24 11:34 ` [RFC v2 45/96] cl8k: add maintenance.h viktor.barna
2022-05-24 11:34 ` [RFC v2 46/96] cl8k: add motion_sense.c viktor.barna
2022-05-24 11:34 ` [RFC v2 47/96] cl8k: add motion_sense.h viktor.barna
2022-05-24 11:34 ` [RFC v2 48/96] cl8k: add pci.c viktor.barna
2022-05-24 11:34 ` [RFC v2 49/96] cl8k: add pci.h viktor.barna
2022-05-24 11:34 ` [RFC v2 50/96] cl8k: add phy.c viktor.barna
2022-06-01 0:27 ` Jeff Johnson
2022-07-11 23:16 ` Viktor Barna
2022-05-24 11:34 ` [RFC v2 51/96] cl8k: add phy.h viktor.barna
2022-05-24 11:34 ` [RFC v2 52/96] cl8k: add platform.c viktor.barna
2022-05-24 11:34 ` [RFC v2 53/96] cl8k: add platform.h viktor.barna
2022-05-24 11:34 ` [RFC v2 54/96] cl8k: add power.c viktor.barna
2022-05-24 11:34 ` [RFC v2 55/96] cl8k: add power.h viktor.barna
2022-05-24 11:34 ` [RFC v2 56/96] cl8k: add radio.c viktor.barna
2022-05-24 11:34 ` viktor.barna [this message]
2022-05-24 11:34 ` [RFC v2 58/96] cl8k: add rates.c viktor.barna
2022-05-24 11:34 ` [RFC v2 59/96] cl8k: add rates.h viktor.barna
2022-05-26 19:54 ` Johannes Berg
2022-07-11 23:17 ` Viktor Barna
2022-07-12 7:17 ` Johannes Berg
2022-05-24 11:34 ` [RFC v2 60/96] cl8k: add recovery.c viktor.barna
2022-05-24 11:34 ` [RFC v2 61/96] cl8k: add recovery.h viktor.barna
2022-05-24 11:34 ` [RFC v2 62/96] cl8k: add regdom.c viktor.barna
2022-05-24 11:34 ` [RFC v2 63/96] cl8k: add regdom.h viktor.barna
2022-05-24 11:34 ` [RFC v2 64/96] cl8k: add reg/reg_access.h viktor.barna
2022-05-24 11:34 ` [RFC v2 65/96] cl8k: add reg/reg_defs.h viktor.barna
2022-05-24 11:34 ` [RFC v2 66/96] cl8k: add rfic.c viktor.barna
2022-05-24 11:34 ` [RFC v2 67/96] cl8k: add rfic.h viktor.barna
2022-06-02 20:40 ` Jeff Johnson
2022-07-11 23:18 ` Viktor Barna
2022-05-24 11:34 ` [RFC v2 68/96] cl8k: add rx.c viktor.barna
2022-05-24 11:34 ` [RFC v2 69/96] cl8k: add rx.h viktor.barna
2022-05-24 11:34 ` [RFC v2 70/96] cl8k: add scan.c viktor.barna
2022-05-24 11:34 ` [RFC v2 71/96] cl8k: add scan.h viktor.barna
2022-05-24 11:34 ` [RFC v2 72/96] cl8k: add sounding.c viktor.barna
2022-05-24 11:34 ` [RFC v2 73/96] cl8k: add sounding.h viktor.barna
2022-05-24 11:34 ` [RFC v2 74/96] cl8k: add sta.c viktor.barna
2022-05-24 11:34 ` [RFC v2 75/96] cl8k: add sta.h viktor.barna
2022-05-24 11:34 ` [RFC v2 76/96] cl8k: add stats.c viktor.barna
2022-06-02 20:59 ` Jeff Johnson
2022-07-11 23:20 ` Viktor Barna
2022-05-24 11:34 ` [RFC v2 77/96] cl8k: add stats.h viktor.barna
2022-05-24 11:34 ` [RFC v2 78/96] cl8k: add tcv.c viktor.barna
2022-05-24 11:34 ` [RFC v2 79/96] cl8k: add tcv.h viktor.barna
2022-05-24 11:34 ` [RFC v2 80/96] cl8k: add temperature.c viktor.barna
2022-05-24 11:34 ` [RFC v2 81/96] cl8k: add temperature.h viktor.barna
2022-05-24 11:34 ` [RFC v2 82/96] cl8k: add traffic.c viktor.barna
2022-05-24 11:34 ` [RFC v2 83/96] cl8k: add traffic.h viktor.barna
2022-05-24 11:34 ` [RFC v2 84/96] cl8k: add tx.c viktor.barna
2022-05-24 11:34 ` [RFC v2 85/96] cl8k: add tx.h viktor.barna
2022-05-24 11:34 ` [RFC v2 86/96] cl8k: add utils.c viktor.barna
2022-05-24 11:34 ` [RFC v2 87/96] cl8k: add utils.h viktor.barna
2022-05-24 11:34 ` [RFC v2 88/96] cl8k: add version.c viktor.barna
2022-05-24 11:34 ` [RFC v2 89/96] cl8k: add version.h viktor.barna
2022-05-24 11:34 ` [RFC v2 90/96] cl8k: add vif.c viktor.barna
2022-05-24 11:34 ` [RFC v2 91/96] cl8k: add vif.h viktor.barna
2022-05-24 11:34 ` [RFC v2 92/96] cl8k: add vns.c viktor.barna
2022-05-24 11:34 ` [RFC v2 93/96] cl8k: add vns.h viktor.barna
2022-05-24 11:35 ` [RFC v2 94/96] cl8k: add wrs.c viktor.barna
2022-05-24 11:35 ` [RFC v2 95/96] cl8k: add wrs.h viktor.barna
2022-05-24 11:35 ` [RFC v2 96/96] wireless: add Celeno vendor viktor.barna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220524113502.1094459-58-viktor.barna@celeno.com \
--to=viktor.barna@celeno.com \
--cc=aviad.brikman@celeno.com \
--cc=davem@davemloft.net \
--cc=eliav.farber@gmail.com \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=maksym.kokhan@celeno.com \
--cc=oleksandr.savchenko@celeno.com \
--cc=shay.bar@celeno.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).