From: Johannes Berg <johannes@sipsolutions.net>
To: linux-wireless@vger.kernel.org
Cc: Johannes Berg <johannes.berg@intel.com>
Subject: [PATCH 13/28] wifi: nl80211: use link ID in NL80211_CMD_SET_BSS
Date: Wed, 5 Oct 2022 15:00:33 +0200 [thread overview]
Message-ID: <20221005145226.3c9f8b71f53e.Id8cbedd0a18273dbe9f25a2bd4d987f22cfc3aac@changeid> (raw)
In-Reply-To: <20221005130048.217341-1-johannes@sipsolutions.net>
From: Johannes Berg <johannes.berg@intel.com>
We clearly need the link ID here, to know the right BSS
to configure. Use/require it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
include/net/cfg80211.h | 2 ++
net/wireless/nl80211.c | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4d35a4234417..659dd1bee70f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2105,6 +2105,7 @@ struct mpath_info {
*
* Used to change BSS parameters (mainly for AP mode).
*
+ * @link_id: link_id or -1 for non-MLD
* @use_cts_prot: Whether to use CTS protection
* (0 = no, 1 = yes, -1 = do not change)
* @use_short_preamble: Whether the use of short preambles is allowed
@@ -2122,6 +2123,7 @@ struct mpath_info {
* @p2p_opp_ps: P2P opportunistic PS (-1 = no change)
*/
struct bss_parameters {
+ int link_id;
int use_cts_prot;
int use_short_preamble;
int use_short_slot_time;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ad7393cd3d18..1d0277758d0e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -7780,6 +7780,7 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
int err;
memset(¶ms, 0, sizeof(params));
+ params.link_id = nl80211_link_id_or_invalid(info->attrs);
/* default to not changing parameters */
params.use_cts_prot = -1;
params.use_short_preamble = -1;
@@ -16564,7 +16565,8 @@ static const struct genl_small_ops nl80211_small_ops[] = {
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = nl80211_set_bss,
.flags = GENL_UNS_ADMIN_PERM,
- .internal_flags = IFLAGS(NL80211_FLAG_NEED_NETDEV_UP),
+ .internal_flags = IFLAGS(NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_MLO_VALID_LINK_ID),
},
{
.cmd = NL80211_CMD_GET_REG,
--
2.37.3
next prev parent reply other threads:[~2022-10-05 13:01 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 13:00 [PATCH 00/28] wifi: further MLO work Johannes Berg
2022-10-05 13:00 ` [PATCH 01/28] wifi: mac80211: add pointer from link STA to STA Johannes Berg
2022-10-05 13:00 ` [PATCH 02/28] wifi: mac80211: add API to show the link STAs in debugfs Johannes Berg
2022-10-05 13:00 ` [PATCH 03/28] wifi: mac80211: include link address " Johannes Berg
2022-10-05 13:00 ` [PATCH 04/28] wifi: mac80211: recalc station aggregate data during link switch Johannes Berg
2022-10-05 13:00 ` [PATCH 05/28] wifi: cfg80211: support reporting failed links Johannes Berg
2022-10-06 10:49 ` Veerendranath Jakkam
2022-10-06 10:51 ` Johannes Berg
2022-10-06 11:09 ` Veerendranath Jakkam
2022-10-06 11:11 ` Johannes Berg
2022-10-06 14:40 ` Veerendranath Jakkam
2022-10-05 13:00 ` [PATCH 06/28] wifi: ieee80211: Support validating ML station profile length Johannes Berg
2022-10-05 13:00 ` [PATCH 07/28] wifi: cfg80211/mac80211: Fix ML element common size calculation Johannes Berg
2022-10-05 13:00 ` [PATCH 08/28] wifi: cfg80211/mac80211: Fix ML element common size validation Johannes Berg
2022-10-05 13:00 ` [PATCH 09/28] wifi: mac80211: Parse station profile from association response Johannes Berg
2022-10-05 13:00 ` [PATCH 10/28] wifi: mac80211: Process association status for affiliated links Johannes Berg
2022-10-05 13:00 ` [PATCH 11/28] wifi: mac80211: wme: use ap_addr instead of deflink BSSID Johannes Berg
2022-10-05 13:00 ` [PATCH 12/28] wifi: mac80211: transmit AddBA with MLD address Johannes Berg
2022-10-05 13:00 ` Johannes Berg [this message]
2022-10-05 13:00 ` [PATCH 14/28] wifi: mac80211: use link_id in ieee80211_change_bss() Johannes Berg
2022-10-05 13:00 ` [PATCH 15/28] wifi: mac80211: advertise TWT requester only with HW support Johannes Berg
2022-10-05 13:00 ` [PATCH 16/28] wifi: mac80211: set internal scan request BSSID Johannes Berg
2022-10-05 13:00 ` [PATCH 17/28] wifi: mac80211: fix AddBA response addressing Johannes Berg
2022-10-05 13:00 ` [PATCH 18/28] wifi: mac80211: add RCU _check() link access variants Johannes Berg
2022-10-05 13:00 ` [PATCH 19/28] wifi: fix multi-link element subelement iteration Johannes Berg
2022-10-05 13:00 ` [PATCH 20/28] wifi: mac80211: mlme: fix null-ptr deref on failed assoc Johannes Berg
2022-10-05 13:00 ` [PATCH 21/28] wifi: mac80211: check link ID in auth/assoc continuation Johannes Berg
2022-10-05 13:00 ` [PATCH 22/28] wifi: mac80211: mlme: mark assoc link in output Johannes Berg
2022-10-05 13:00 ` [PATCH 23/28] wifi: mac80211: change AddBA deny error message Johannes Berg
2022-10-05 13:00 ` [PATCH 24/28] wifi: mac80211: don't clear DTIM period after setting it Johannes Berg
2022-10-05 13:00 ` [PATCH 25/28] wifi: mac80211: prohibit IEEE80211_HT_CAP_DELAY_BA with MLO Johannes Berg
2022-10-05 13:00 ` [PATCH 26/28] wifi: mac80211: agg-rx: avoid band check Johannes Berg
2022-10-05 13:00 ` [PATCH 27/28] wifi: mac80211: remove support for AddBA with fragmentation Johannes Berg
2022-10-05 13:00 ` [PATCH 28/28] wifi: mac80211: fix ifdef symbol name Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221005145226.3c9f8b71f53e.Id8cbedd0a18273dbe9f25a2bd4d987f22cfc3aac@changeid \
--to=johannes@sipsolutions.net \
--cc=johannes.berg@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).