From: gregory.greenman@intel.com
To: kvalo@kernel.org, johannes@sipsolutions.net
Cc: linux-wireless@vger.kernel.org,
Mordechay Goodstein <mordechay.goodstein@intel.com>,
Gregory Greenman <gregory.greenman@intel.com>
Subject: [PATCH 07/12] wifi: iwlwifi: mvm: add sniffer meta data APIs
Date: Fri, 27 Jan 2023 00:28:16 +0200 [thread overview]
Message-ID: <20230127002430.6729c0be66aa.I95ad94d5e137ec80010facd8ee57cd40461a0721@changeid> (raw)
In-Reply-To: <20230126222821.305122-1-gregory.greenman@intel.com>
From: Mordechay Goodstein <mordechay.goodstein@intel.com>
We add TSF overwrite for EHT MU/TB high and low, and add definitions
for EHT Data 5 meta data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
---
.../net/wireless/intel/iwlwifi/fw/api/rx.h | 119 ++++++++++++++++--
drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 4 +
2 files changed, 112 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
index ffa9f3409a9b..1c4e84932058 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
@@ -273,7 +273,7 @@ enum iwl_rx_mpdu_mac_info {
};
/* TSF overload low dword */
-enum iwl_rx_phy_data0 {
+enum iwl_rx_phy_he_data0 {
/* info type: HE any */
IWL_RX_PHY_DATA0_HE_BEAM_CHNG = 0x00000001,
IWL_RX_PHY_DATA0_HE_UPLINK = 0x00000002,
@@ -289,6 +289,25 @@ enum iwl_rx_phy_data0 {
IWL_RX_PHY_DATA0_HE_DELIM_EOF = 0x80000000,
};
+/* TSF overload low dword */
+enum iwl_rx_phy_eht_data0 {
+ /* info type: EHT any */
+ /* 1 bits reserved */
+ IWL_RX_PHY_DATA0_EHT_UPLINK = BIT(1),
+ IWL_RX_PHY_DATA0_EHT_BSS_COLOR_MASK = 0x000000fc,
+ IWL_RX_PHY_DATA0_ETH_SPATIAL_REUSE_MASK = 0x00000f00,
+ IWL_RX_PHY_DATA0_EHT_PS160 = BIT(12),
+ IWL_RX_PHY_DATA0_EHT_TXOP_DUR_MASK = 0x000fe000,
+ IWL_RX_PHY_DATA0_EHT_LDPC_EXT_SYM = BIT(20),
+ IWL_RX_PHY_DATA0_EHT_PRE_FEC_PAD_MASK = 0x00600000,
+ IWL_RX_PHY_DATA0_EHT_PE_DISAMBIG = BIT(23),
+ IWL_RX_PHY_DATA0_EHT_BW320_SLOT = BIT(24),
+ IWL_RX_PHY_DATA0_EHT_SIGA_CRC_OK = BIT(25),
+ IWL_RX_PHY_DATA0_EHT_PHY_VER = 0x1c000000,
+ /* 2 bits reserved */
+ IWL_RX_PHY_DATA0_EHT_DELIM_EOF = BIT(31),
+};
+
enum iwl_rx_phy_info_type {
IWL_RX_PHY_INFO_TYPE_NONE = 0,
IWL_RX_PHY_INFO_TYPE_CCK = 1,
@@ -301,19 +320,26 @@ enum iwl_rx_phy_info_type {
IWL_RX_PHY_INFO_TYPE_HE_TB = 8,
IWL_RX_PHY_INFO_TYPE_HE_MU_EXT = 9,
IWL_RX_PHY_INFO_TYPE_HE_TB_EXT = 10,
+ IWL_RX_PHY_INFO_TYPE_EHT_MU = 11,
+ IWL_RX_PHY_INFO_TYPE_EHT_TB = 12,
+ IWL_RX_PHY_INFO_TYPE_EHT_MU_EXT = 13,
+ IWL_RX_PHY_INFO_TYPE_EHT_TB_EXT = 14,
};
/* TSF overload high dword */
-enum iwl_rx_phy_data1 {
+enum iwl_rx_phy_common_data1 {
/*
* check this first - if TSF overload is set,
* see &enum iwl_rx_phy_info_type
*/
IWL_RX_PHY_DATA1_INFO_TYPE_MASK = 0xf0000000,
- /* info type: HT/VHT/HE any */
+ /* info type: HT/VHT/HE/EHT any */
IWL_RX_PHY_DATA1_LSIG_LEN_MASK = 0x0fff0000,
+};
+/* TSF overload high dword For HE rates*/
+enum iwl_rx_phy_he_data1 {
/* info type: HE MU/MU-EXT */
IWL_RX_PHY_DATA1_HE_MU_SIGB_COMPRESSION = 0x00000001,
IWL_RX_PHY_DATA1_HE_MU_SIBG_SYM_OR_USER_NUM_MASK = 0x0000001e,
@@ -329,8 +355,23 @@ enum iwl_rx_phy_data1 {
IWL_RX_PHY_DATA1_HE_TB_LOW_SS_MASK = 0x0000000e,
};
+/* TSF overload high dword For EHT-MU/TB rates*/
+enum iwl_rx_phy_eht_data1 {
+ /* info type: EHT-MU */
+ IWL_RX_PHY_DATA1_EHT_MU_NUM_SIG_SYM_USIGA2 = 0x0000001f,
+ /* info type: EHT-TB */
+ IWL_RX_PHY_DATA1_EHT_TB_PILOT_TYPE = BIT(0),
+ IWL_RX_PHY_DATA1_EHT_TB_LOW_SS = 0x0000001e,
+
+ /* info type: EHT any */
+ /* number of EHT-LTF symbols 0 - 1 EHT-LTF, 1 - 2 EHT-LTFs, 2 - 4 EHT-LTFs,
+ * 3 - 6 EHT-LTFs, 4 - 8 EHT-LTFs */
+ IWL_RX_PHY_DATA1_EHT_SIG_LTF_NUM = 0x000000e0,
+ IWL_RX_PHY_DATA1_EHT_RU_ALLOC = 0x0000ff00,
+};
+
/* goes into Metadata DW 7 */
-enum iwl_rx_phy_data2 {
+enum iwl_rx_phy_he_data2 {
/* info type: HE MU-EXT */
/* the a1/a2/... is what the PHY/firmware calls the values */
IWL_RX_PHY_DATA2_HE_MU_EXT_CH1_RU0 = 0x000000ff, /* a1 */
@@ -346,7 +387,7 @@ enum iwl_rx_phy_data2 {
};
/* goes into Metadata DW 8 */
-enum iwl_rx_phy_data3 {
+enum iwl_rx_phy_he_data3 {
/* info type: HE MU-EXT */
IWL_RX_PHY_DATA3_HE_MU_EXT_CH1_RU1 = 0x000000ff, /* c1 */
IWL_RX_PHY_DATA3_HE_MU_EXT_CH1_RU3 = 0x0000ff00, /* c2 */
@@ -355,7 +396,7 @@ enum iwl_rx_phy_data3 {
};
/* goes into Metadata DW 4 high 16 bits */
-enum iwl_rx_phy_data4 {
+enum iwl_rx_phy_he_he_data4 {
/* info type: HE MU-EXT */
IWL_RX_PHY_DATA4_HE_MU_EXT_CH1_CTR_RU = 0x0001,
IWL_RX_PHY_DATA4_HE_MU_EXT_CH2_CTR_RU = 0x0002,
@@ -366,6 +407,51 @@ enum iwl_rx_phy_data4 {
IWL_RX_PHY_DATA4_HE_MU_EXT_PREAMBLE_PUNC_TYPE_MASK = 0x0600,
};
+/* goes into Metadata DW 7 */
+enum iwl_rx_phy_eht_data2 {
+ /* info type: EHT-MU-EXT */
+ /* OFDM_RX_VECTOR_COMMON_RU_ALLOC_0_OUT */
+ IWL_RX_PHY_DATA2_EHT_MU_EXT_RU_ALLOC_A1 = 0x000001ff,
+ IWL_RX_PHY_DATA2_EHT_MU_EXT_RU_ALLOC_A2 = 0x0003fe00,
+ IWL_RX_PHY_DATA2_EHT_MU_EXT_RU_ALLOC_A3 = 0x01fc0000,
+
+ /* info type: EHT-TB-EXT */
+ IWL_RX_PHY_DATA2_EHT_TB_EXT_TRIG_SIGA1 = 0xffffffff,
+};
+
+/* goes into Metadata DW 8 */
+enum iwl_rx_phy_eht_data3 {
+ /* info type: EHT-MU-EXT */
+ /* OFDM_RX_VECTOR_COMMON_RU_ALLOC_1_OUT */
+ IWL_RX_PHY_DATA3_EHT_MU_EXT_RU_ALLOC_B1 = 0x000001ff,
+ IWL_RX_PHY_DATA3_EHT_MU_EXT_RU_ALLOC_B2 = 0x0003fe00,
+ IWL_RX_PHY_DATA3_EHT_MU_EXT_RU_ALLOC_B3 = 0x01fc0000,
+};
+
+/* goes into Metadata DW 4 */
+enum iwl_rx_phy_eht_data4 {
+ /* info type: EHT-MU-EXT */
+ /* OFDM_RX_VECTOR_COMMON_RU_ALLOC_2_OUT */
+ IWL_RX_PHY_DATA4_EHT_MU_EXT_RU_ALLOC_C1 = 0x000001ff,
+ IWL_RX_PHY_DATA4_EHT_MU_EXT_RU_ALLOC_C2 = 0x0003fe00,
+ IWL_RX_PHY_DATA4_EHT_MU_EXT_RU_ALLOC_C3 = 0x01fc0000,
+ IWL_RX_PHY_DATA4_EHT_MU_EXT_SIGB_MCS = 0x18000000,
+};
+
+/* goes into Metadata DW 16 */
+enum iwl_rx_phy_data5 {
+ /* info type: EHT any */
+ IWL_RX_PHY_DATA5_EHT_TYPE_AND_COMP = 0x00000003,
+ /* info type: EHT-TB */
+ IWL_RX_PHY_DATA5_EHT_TB_SPATIAL_REUSE1 = 0x0000003c,
+ IWL_RX_PHY_DATA5_EHT_TB_SPATIAL_REUSE2 = 0x000003c0,
+ /* info type: EHT-MU */
+ IWL_RX_PHY_DATA5_EHT_MU_PUNC_CH_CODE = 0x0000007c,
+ IWL_RX_PHY_DATA5_EHT_MU_STA_ID_USR = 0x0003ff80,
+ IWL_RX_PHY_DATA5_EHT_MU_NUM_USR_NON_OFDMA = 0x001c0000,
+ IWL_RX_PHY_DATA5_EHT_MU_SPATIAL_CONF_USR_FIELD = 0x0fe00000,
+};
+
/**
* struct iwl_rx_mpdu_desc_v1 - RX MPDU descriptor
*/
@@ -440,7 +526,9 @@ struct iwl_rx_mpdu_desc_v1 {
/**
* @phy_data1: valid only if
* %IWL_RX_MPDU_PHY_TSF_OVERLOAD is set,
- * see &enum iwl_rx_phy_data1.
+ * see &enum iwl_rx_phy_common_data1 or
+ * &enum iwl_rx_phy_he_data1 or
+ * &enum iwl_rx_phy_eht_data1.
*/
__le32 phy_data1;
};
@@ -540,11 +628,18 @@ struct iwl_rx_mpdu_desc_v3 {
__le32 phy_data1;
};
};
- /* DW16 & DW17 */
+ /* DW16 */
+ /**
+ * @phy_data5: valid only if
+ * %IWL_RX_MPDU_PHY_TSF_OVERLOAD is set,
+ * see &enum iwl_rx_phy_data5.
+ */
+ __le32 phy_data5;
+ /* DW17 */
/**
* @reserved: reserved
*/
- __le32 reserved[2];
+ __le32 reserved[1];
} __packed; /* RX_MPDU_RES_START_API_S_VER_3,
RX_MPDU_RES_START_API_S_VER_5 */
@@ -639,6 +734,7 @@ struct iwl_rx_mpdu_desc {
#define RX_NO_DATA_INFO_ERR_UNSUPPORTED_RATE 2
#define RX_NO_DATA_INFO_ERR_NO_DELIM 3
#define RX_NO_DATA_INFO_ERR_BAD_MAC_HDR 4
+#define RX_NO_DATA_INFO_LOW_ENERGY 5
#define RX_NO_DATA_FRAME_TIME_POS 0
#define RX_NO_DATA_FRAME_TIME_MSK (0xfffff << RX_NO_DATA_FRAME_TIME_POS)
@@ -655,7 +751,8 @@ struct iwl_rx_mpdu_desc {
* @on_air_rise_time: GP2 during on air rise
* @fr_time: frame time
* @rate: rate/mcs of frame
- * @phy_info: &enum iwl_rx_phy_data0 and &enum iwl_rx_phy_info_type
+ * @phy_info: &enum iwl_rx_phy_he_data0 or &enum iwl_rx_phy_eht_data0
+ * based on &enum iwl_rx_phy_info_type
* @rx_vec: DW-12:9 raw RX vectors from DSP according to modulation type.
* for VHT: OFDM_RX_VECTOR_SIGA1_OUT, OFDM_RX_VECTOR_SIGA2_OUT
* for HE: OFDM_RX_VECTOR_HE_SIGA1_OUT, OFDM_RX_VECTOR_HE_SIGA2_OUT
@@ -679,7 +776,7 @@ struct iwl_rx_no_data {
* @on_air_rise_time: GP2 during on air rise
* @fr_time: frame time
* @rate: rate/mcs of frame
- * @phy_info: &enum iwl_rx_phy_data0 and &enum iwl_rx_phy_info_type
+ * @phy_info: &enum iwl_rx_phy_eht_data0 and &enum iwl_rx_phy_info_type
* @rx_vec: DW-12:9 raw RX vectors from DSP according to modulation type.
* for VHT: OFDM_RX_VECTOR_SIGA1_OUT, OFDM_RX_VECTOR_SIGA2_OUT
* for HE: OFDM_RX_VECTOR_HE_SIGA1_OUT, OFDM_RX_VECTOR_HE_SIGA2_OUT
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
index 6048f5e2f8a7..83e2be64b33f 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c
@@ -1347,6 +1347,10 @@ static void iwl_mvm_decode_he_phy_data(struct iwl_mvm *mvm,
case IWL_RX_PHY_INFO_TYPE_HT:
case IWL_RX_PHY_INFO_TYPE_VHT_SU:
case IWL_RX_PHY_INFO_TYPE_VHT_MU:
+ case IWL_RX_PHY_INFO_TYPE_EHT_MU:
+ case IWL_RX_PHY_INFO_TYPE_EHT_TB:
+ case IWL_RX_PHY_INFO_TYPE_EHT_MU_EXT:
+ case IWL_RX_PHY_INFO_TYPE_EHT_TB_EXT:
return;
case IWL_RX_PHY_INFO_TYPE_HE_TB_EXT:
he->data1 |= cpu_to_le16(IEEE80211_RADIOTAP_HE_DATA1_SPTL_REUSE_KNOWN |
--
2.38.1
next prev parent reply other threads:[~2023-01-26 22:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 22:28 [PATCH 00/12] iwlwifi: updates intended for v6.3 2023-01-27 gregory.greenman
2023-01-26 22:28 ` [PATCH 01/12] wifi: iwlwifi: mvm: report hardware timestamps in RX/TX status gregory.greenman
2023-01-26 22:28 ` [PATCH 02/12] wifi: iwlwifi: mention the response structure in the kerneldoc gregory.greenman
2023-01-26 22:28 ` [PATCH 03/12] wifi: iwlwifi: improve tag handling in iwl_request_firmware gregory.greenman
2023-01-26 22:28 ` [PATCH 04/12] wifi: iwlwifi: mvm: remove h from printk format specifier gregory.greenman
2023-01-26 22:28 ` [PATCH 05/12] wifi: iwlwifi: mvm: always send nullfunc frames on MGMT queue gregory.greenman
2023-01-26 22:28 ` [PATCH 06/12] wifi: iwlwifi: rx: add sniffer support for EHT mode gregory.greenman
2023-01-26 22:28 ` gregory.greenman [this message]
2023-01-26 22:28 ` [PATCH 08/12] wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer gregory.greenman
2023-01-26 22:28 ` [PATCH 09/12] wifi: iwlwifi: mvm: Reset rate index if rate is wrong gregory.greenman
2023-01-26 22:28 ` [PATCH 10/12] wifi: iwlwifi: bump FW API to 74 for AX devices gregory.greenman
2023-01-26 22:28 ` [PATCH 11/12] wifi: iwlwifi: mvm: Support STEP equalizer settings from BIOS gregory.greenman
2023-01-26 22:28 ` [PATCH 12/12] wifi: iwlwifi: mei: fix compilation errors in rfkill() gregory.greenman
2023-01-29 16:47 ` [PATCH 00/12] iwlwifi: updates intended for v6.3 2023-01-27 Greenman, Gregory
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127002430.6729c0be66aa.I95ad94d5e137ec80010facd8ee57cd40461a0721@changeid \
--to=gregory.greenman@intel.com \
--cc=johannes@sipsolutions.net \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mordechay.goodstein@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).