From: Martin Kaistra <martin.kaistra@linutronix.de>
To: linux-wireless@vger.kernel.org
Cc: Jes Sorensen <Jes.Sorensen@gmail.com>,
Kalle Valo <kvalo@kernel.org>, Ping-Ke Shih <pkshih@realtek.com>,
Bitterblue Smith <rtl8821cerfe2@gmail.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [RFC PATCH 00/14] wifi: rtl8xxxu: Add AP mode support for 8188f
Date: Wed, 22 Mar 2023 18:18:51 +0100 [thread overview]
Message-ID: <20230322171905.492855-1-martin.kaistra@linutronix.de> (raw)
This series intends to bring AP mode support to the rtl8xxxu driver,
more specifically for the 8188f, because this is the HW I have.
The work is based on the vendor driver as I do not have access to
datasheets.
This is an RFC, so that there can be a discussion first before
potentially implementing support for the other chips in this driver, if
required.
Also while doing some measurements with iperf3 to compare with the
vendor driver, I saw, that TCP traffic from AP to STA is slower than in
the vendor driver. For UDP it looks fine. I hope I can get some help to
fix this.
* vendor driver:
without 802.11n:
UDP (AP -> STA): 27 Mbits/sec
UDP (STA -> AP): 33 Mbits/sec
TCP (AP -> STA): 24 Mbits/sec
TCP (STA -> AP): 26 Mbits/sec
with 802.11n:
UDP (AP -> STA): 51 Mbits/sec
UDP (STA -> AP): 35 Mbits/sec
TCP (AP -> STA): 40 Mbits/sec
TCP (STA -> AP): 36 Mbits/sec
* rtl8xxxu:
without 802.11n:
UDP (AP -> STA): 25 Mbits/sec
UDP (STA -> AP): 31 Mbits/sec
TCP (AP -> STA): 3 Mbits/sec !
TCP (STA -> AP): 25 Mbits/sec
with 802.11n:
UDP (AP -> STA): 41 Mbits/sec
UDP (STA -> AP): 36 Mbits/sec
TCP (AP -> STA): 3 Mbits/sec !
TCP (STA -> AP): 32 Mbits/sec
Thanks,
Martin
Martin Kaistra (14):
wifi: rtl8xxxu: Add start_ap() callback
wifi: rtl8xxxu: Select correct queue for beacon frames
wifi: rtl8xxxu: Add beacon functions
wifi: rtl8xxxu: Add set_tim() callback
wifi: rtl8xxxu: Allow setting rts threshold to -1
wifi: rtl8xxxu: Allow creating interface in AP mode
wifi: rtl8xxxu: Add parameter macid to update_rate_mask
wifi: rtl8xxxu: Actually use macid in rtl8xxxu_gen2_report_connect
wifi: rtl8xxxu: Add parameter role to report_connect
wifi: rtl8xxxu: Add sta_add() callback
wifi: rtl8xxxu: Put the macid in txdesc
wifi: rtl8xxxu: Enable hw seq for all non-qos frames
wifi: rtl8xxxu: Clean up filter configuration
wifi: rtl8xxxu: Declare AP mode support for 8188f
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 28 ++-
.../realtek/rtl8xxxu/rtl8xxxu_8188e.c | 3 +-
.../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1 +
.../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 226 +++++++++++++++---
.../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 2 +
5 files changed, 222 insertions(+), 38 deletions(-)
--
2.30.2
next reply other threads:[~2023-03-22 17:19 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-22 17:18 Martin Kaistra [this message]
2023-03-22 17:18 ` [RFC PATCH 01/14] wifi: rtl8xxxu: Add start_ap() callback Martin Kaistra
2023-03-27 0:46 ` Ping-Ke Shih
2023-03-27 13:10 ` Bitterblue Smith
2023-03-27 16:08 ` Martin Kaistra
2023-03-27 18:29 ` Bitterblue Smith
2023-03-29 0:18 ` Ping-Ke Shih
2023-03-22 17:18 ` [RFC PATCH 02/14] wifi: rtl8xxxu: Select correct queue for beacon frames Martin Kaistra
2023-03-27 0:51 ` Ping-Ke Shih
2023-03-22 17:18 ` [RFC PATCH 03/14] wifi: rtl8xxxu: Add beacon functions Martin Kaistra
2023-03-27 1:19 ` Ping-Ke Shih
2023-03-27 13:10 ` Bitterblue Smith
2023-03-22 17:18 ` [RFC PATCH 04/14] wifi: rtl8xxxu: Add set_tim() callback Martin Kaistra
2023-03-27 1:20 ` Ping-Ke Shih
2023-03-22 17:18 ` [RFC PATCH 05/14] wifi: rtl8xxxu: Allow setting rts threshold to -1 Martin Kaistra
2023-03-27 1:21 ` Ping-Ke Shih
2023-03-22 17:18 ` [RFC PATCH 06/14] wifi: rtl8xxxu: Allow creating interface in AP mode Martin Kaistra
2023-03-27 1:39 ` Ping-Ke Shih
2023-03-27 13:15 ` Martin Kaistra
2023-03-22 17:18 ` [RFC PATCH 07/14] wifi: rtl8xxxu: Add parameter macid to update_rate_mask Martin Kaistra
2023-03-27 1:48 ` Ping-Ke Shih
2023-03-27 8:41 ` Kalle Valo
2023-03-27 9:19 ` Ping-Ke Shih
2023-03-27 13:12 ` Bitterblue Smith
2023-03-22 17:18 ` [RFC PATCH 08/14] wifi: rtl8xxxu: Actually use macid in rtl8xxxu_gen2_report_connect Martin Kaistra
2023-03-27 1:48 ` Ping-Ke Shih
2023-03-22 17:19 ` [RFC PATCH 09/14] wifi: rtl8xxxu: Add parameter role to report_connect Martin Kaistra
2023-03-27 1:54 ` Ping-Ke Shih
2023-03-27 13:11 ` Bitterblue Smith
2023-03-22 17:19 ` [RFC PATCH 10/14] wifi: rtl8xxxu: Add sta_add() callback Martin Kaistra
2023-03-27 1:56 ` Ping-Ke Shih
2023-03-22 17:19 ` [RFC PATCH 11/14] wifi: rtl8xxxu: Put the macid in txdesc Martin Kaistra
2023-03-27 1:58 ` Ping-Ke Shih
2023-03-27 13:11 ` Bitterblue Smith
2023-03-22 17:19 ` [RFC PATCH 12/14] wifi: rtl8xxxu: Enable hw seq for all non-qos frames Martin Kaistra
2023-03-27 2:01 ` Ping-Ke Shih
2023-03-22 17:19 ` [RFC PATCH 13/14] wifi: rtl8xxxu: Clean up filter configuration Martin Kaistra
2023-03-27 2:06 ` Ping-Ke Shih
2023-03-28 14:47 ` Martin Kaistra
2023-03-29 0:27 ` Ping-Ke Shih
2023-03-22 17:19 ` [RFC PATCH 14/14] wifi: rtl8xxxu: Declare AP mode support for 8188f Martin Kaistra
2023-03-27 2:06 ` Ping-Ke Shih
2023-03-23 17:12 ` [RFC PATCH 00/14] wifi: rtl8xxxu: Add " Bitterblue Smith
2023-03-27 7:58 ` Martin Kaistra
2023-04-05 15:31 ` Martin Kaistra
2023-04-06 0:42 ` Ping-Ke Shih
2023-04-06 15:09 ` Martin Kaistra
2023-04-09 12:41 ` Bitterblue Smith
2023-04-12 10:02 ` Martin Kaistra
2023-04-14 21:49 ` Bitterblue Smith
2023-04-07 1:18 ` Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230322171905.492855-1-martin.kaistra@linutronix.de \
--to=martin.kaistra@linutronix.de \
--cc=Jes.Sorensen@gmail.com \
--cc=bigeasy@linutronix.de \
--cc=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=rtl8821cerfe2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).