[PATCH v3 1/2] wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx

[Fedor Pchelkin <pchelkin@ispras.ru>]

Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().

Consider the following scenario:

CPU0					CPU1

ath9k_wmi_cmd(...)
  mutex_lock(&wmi->op_mutex)
  ath9k_wmi_cmd_issue(...)
  wait_for_completion_timeout(...)
  ---
  timeout
  ---
					/* the callback is being processed
					 * before last_seq_id became zero
					 */
					ath9k_wmi_ctrl_rx(...)
					  spin_lock_irqsave(...)
					  /* wmi->last_seq_id check here
					   * doesn't detect timeout yet
					   */
					  spin_unlock_irqrestore(...)
  /* last_seq_id is zeroed to
   * indicate there was a timeout
   */
  wmi->last_seq_id = 0
  mutex_unlock(&wmi->op_mutex)
  return -ETIMEDOUT

ath9k_wmi_cmd(...)
  mutex_lock(&wmi->op_mutex)
  /* the buffer is replaced with
   * another one
   */
  wmi->cmd_rsp_buf = rsp_buf
  wmi->cmd_rsp_len = rsp_len
  ath9k_wmi_cmd_issue(...)
    spin_lock_irqsave(...)
    spin_unlock_irqrestore(...)
  wait_for_completion_timeout(...)
					/* the continuation of the
					 * callback left after the first
					 * ath9k_wmi_cmd call
					 */
					  ath9k_wmi_rsp_callback(...)
					    /* copying data designated
					     * to already timeouted
					     * WMI command into an
					     * inappropriate wmi_cmd_buf
					     */
					    memcpy(...)
					    complete(&wmi->cmd_wait)
  /* awakened by the bogus callback
   * => invalid return result
   */
  mutex_unlock(&wmi->op_mutex)
  return 0

To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
---
v2: do not extract ath9k_wmi_rsp_callback() internals, rephrase
description
v3: per Hillf Danton's comment, protect last_seq_id with wmi_lock on
timeout path, divide the v2 version into two separate patches; the first
one is concerned with last_seq_id and completion under wmi_lock, the
second one is for moving rsp buffer and length recording under wmi lock.
Note that it's been only tested with Syzkaller and on basic driver
scenarios with real hardware.

 drivers/net/wireless/ath/ath9k/wmi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index d652c647d56b..04f363cb90fe 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -242,10 +242,10 @@ static void ath9k_wmi_ctrl_rx(void *priv, struct sk_buff *skb,
 		spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 		goto free_skb;
 	}
-	spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
 	/* WMI command response */
 	ath9k_wmi_rsp_callback(wmi, skb);
+	spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 
 free_skb:
 	kfree_skb(skb);
@@ -308,8 +308,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	struct ath_common *common = ath9k_hw_common(ah);
 	u16 headroom = sizeof(struct htc_frame_hdr) +
 		       sizeof(struct wmi_cmd_hdr);
+	unsigned long time_left, flags;
 	struct sk_buff *skb;
-	unsigned long time_left;
 	int ret = 0;
 
 	if (ah->ah_flags & AH_UNPLUGGED)
@@ -345,7 +345,9 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	if (!time_left) {
 		ath_dbg(common, WMI, "Timeout waiting for WMI command: %s\n",
 			wmi_cmd_to_name(cmd_id));
+		spin_lock_irqsave(&wmi->wmi_lock, flags);
 		wmi->last_seq_id = 0;
+		spin_unlock_irqrestore(&wmi->wmi_lock, flags);
 		mutex_unlock(&wmi->op_mutex);
 		return -ETIMEDOUT;
 	}
-- 
2.34.1