From: Youghandhar Chintala <quic_youghand@quicinc.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_mpubbise@quicinc.com>,
Youghandhar Chintala <quic_youghand@quicinc.com>
Subject: [PATCH] wifi: ath10k: Trigger STA disconnect after reconfig complete on hardware restart
Date: Thu, 18 May 2023 15:45:15 +0530 [thread overview]
Message-ID: <20230518101515.3820-1-quic_youghand@quicinc.com> (raw)
Currently, on WCN3990, the station disconnect after hardware recovery is
not working as expected. This is because of setting the
IEEE80211_SDATA_DISCONNECT_HW_RESTART flag very early in the hardware
recovery process even before the driver invokes ieee80211_hw_restart().
On the contrary, mac80211 expects this flag to be set after
ieee80211_hw_restart() is invoked for it to trigger station disconnect.
Set the IEEE80211_SDATA_DISCONNECT_HW_RESTART flag in
ath10k_reconfig_complete() instead to fix this.
The other targets are not affected by this change, since the hardware
params flag is not set.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
Fixes: 2c3fc50591ff ("ath10k: Trigger sta disconnect on hardware restart")
Signed-off-by: Youghandhar Chintala <quic_youghand@quicinc.com>
---
drivers/net/wireless/ath/ath10k/core.c | 9 ---------
drivers/net/wireless/ath/ath10k/mac.c | 8 ++++++++
2 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 533ed7169e11..6cdb225b7eac 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2504,7 +2504,6 @@ EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
static void ath10k_core_restart(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k, restart_work);
- struct ath10k_vif *arvif;
int ret;
set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
@@ -2543,14 +2542,6 @@ static void ath10k_core_restart(struct work_struct *work)
ar->state = ATH10K_STATE_RESTARTING;
ath10k_halt(ar);
ath10k_scan_finish(ar);
- if (ar->hw_params.hw_restart_disconnect) {
- list_for_each_entry(arvif, &ar->arvifs, list) {
- if (arvif->is_up &&
- arvif->vdev_type == WMI_VDEV_TYPE_STA)
- ieee80211_hw_restart_disconnect(arvif->vif);
- }
- }
-
ieee80211_restart_hw(ar->hw);
break;
case ATH10K_STATE_OFF:
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c4bf2fdbc0f..ab12e3e0c515 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8109,6 +8109,7 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
enum ieee80211_reconfig_type reconfig_type)
{
struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;
if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
return;
@@ -8123,6 +8124,13 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
ar->state = ATH10K_STATE_ON;
ieee80211_wake_queues(ar->hw);
clear_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags);
+ if (ar->hw_params.hw_restart_disconnect) {
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ if (arvif->is_up && arvif->vdev_type == WMI_VDEV_TYPE_STA)
+ ieee80211_hw_restart_disconnect(arvif->vif);
+ }
+ }
+
}
mutex_unlock(&ar->conf_mutex);
--
2.38.0
next reply other threads:[~2023-05-18 10:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 10:15 Youghandhar Chintala [this message]
2023-06-01 10:32 ` [PATCH] wifi: ath10k: Trigger STA disconnect after reconfig complete on hardware restart Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230518101515.3820-1-quic_youghand@quicinc.com \
--to=quic_youghand@quicinc.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_mpubbise@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).