From: gregory.greenman@intel.com
To: johannes@sipsolutions.net
Cc: linux-wireless@vger.kernel.org,
Gregory Greenman <gregory.greenman@intel.com>,
Sultan Alsawaf <sultan@kerneltoast.com>
Subject: [PATCH v2] iwlwifi: mvm: handle PS changes in vif_cfg_changed
Date: Tue, 5 Sep 2023 16:29:57 +0300 [thread overview]
Message-ID: <20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid> (raw)
From: Gregory Greenman <gregory.greenman@intel.com>
Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.
Fixes: 22c588343529 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
---
.../wireless/intel/iwlwifi/mvm/mld-mac80211.c | 121 +++++++++---------
1 file changed, 63 insertions(+), 58 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
index 9615bfff7f7d..778a311b500b 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
@@ -731,73 +731,78 @@ static void iwl_mvm_mld_vif_cfg_changed_station(struct iwl_mvm *mvm,
mvmvif->associated = vif->cfg.assoc;
- if (!(changes & BSS_CHANGED_ASSOC))
- return;
-
- if (vif->cfg.assoc) {
- /* clear statistics to get clean beacon counter */
- iwl_mvm_request_statistics(mvm, true);
- iwl_mvm_sf_update(mvm, vif, false);
- iwl_mvm_power_vif_assoc(mvm, vif);
-
- for_each_mvm_vif_valid_link(mvmvif, i) {
- memset(&mvmvif->link[i]->beacon_stats, 0,
- sizeof(mvmvif->link[i]->beacon_stats));
+ if (changes & BSS_CHANGED_ASSOC) {
+ if (vif->cfg.assoc) {
+ /* clear statistics to get clean beacon counter */
+ iwl_mvm_request_statistics(mvm, true);
+ iwl_mvm_sf_update(mvm, vif, false);
+ iwl_mvm_power_vif_assoc(mvm, vif);
+
+ for_each_mvm_vif_valid_link(mvmvif, i) {
+ memset(&mvmvif->link[i]->beacon_stats, 0,
+ sizeof(mvmvif->link[i]->beacon_stats));
+
+ if (vif->p2p) {
+ iwl_mvm_update_smps(mvm, vif,
+ IWL_MVM_SMPS_REQ_PROT,
+ IEEE80211_SMPS_DYNAMIC, i);
+ }
+
+ rcu_read_lock();
+ link_conf = rcu_dereference(vif->link_conf[i]);
+ if (link_conf && !link_conf->dtim_period)
+ protect = true;
+ rcu_read_unlock();
+ }
- if (vif->p2p) {
- iwl_mvm_update_smps(mvm, vif,
- IWL_MVM_SMPS_REQ_PROT,
- IEEE80211_SMPS_DYNAMIC, i);
+ if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) &&
+ protect) {
+ /* If we're not restarting and still haven't
+ * heard a beacon (dtim period unknown) then
+ * make sure we still have enough minimum time
+ * remaining in the time event, since the auth
+ * might actually have taken quite a while
+ * (especially for SAE) and so the remaining
+ * time could be small without us having heard
+ * a beacon yet.
+ */
+ iwl_mvm_protect_assoc(mvm, vif, 0);
}
- rcu_read_lock();
- link_conf = rcu_dereference(vif->link_conf[i]);
- if (link_conf && !link_conf->dtim_period)
- protect = true;
- rcu_read_unlock();
- }
+ iwl_mvm_sf_update(mvm, vif, false);
+
+ /* FIXME: need to decide about misbehaving AP handling */
+ iwl_mvm_power_vif_assoc(mvm, vif);
+ } else if (iwl_mvm_mld_vif_have_valid_ap_sta(mvmvif)) {
+ iwl_mvm_mei_host_disassociated(mvm);
- if (!test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) &&
- protect) {
- /* If we're not restarting and still haven't
- * heard a beacon (dtim period unknown) then
- * make sure we still have enough minimum time
- * remaining in the time event, since the auth
- * might actually have taken quite a while
- * (especially for SAE) and so the remaining
- * time could be small without us having heard
- * a beacon yet.
+ /* If update fails - SF might be running in associated
+ * mode while disassociated - which is forbidden.
*/
- iwl_mvm_protect_assoc(mvm, vif, 0);
+ ret = iwl_mvm_sf_update(mvm, vif, false);
+ WARN_ONCE(ret &&
+ !test_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED,
+ &mvm->status),
+ "Failed to update SF upon disassociation\n");
+
+ /* If we get an assert during the connection (after the
+ * station has been added, but before the vif is set
+ * to associated), mac80211 will re-add the station and
+ * then configure the vif. Since the vif is not
+ * associated, we would remove the station here and
+ * this would fail the recovery.
+ */
+ iwl_mvm_mld_vif_delete_all_stas(mvm, vif);
}
- iwl_mvm_sf_update(mvm, vif, false);
-
- /* FIXME: need to decide about misbehaving AP handling */
- iwl_mvm_power_vif_assoc(mvm, vif);
- } else if (iwl_mvm_mld_vif_have_valid_ap_sta(mvmvif)) {
- iwl_mvm_mei_host_disassociated(mvm);
-
- /* If update fails - SF might be running in associated
- * mode while disassociated - which is forbidden.
- */
- ret = iwl_mvm_sf_update(mvm, vif, false);
- WARN_ONCE(ret &&
- !test_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED,
- &mvm->status),
- "Failed to update SF upon disassociation\n");
-
- /* If we get an assert during the connection (after the
- * station has been added, but before the vif is set
- * to associated), mac80211 will re-add the station and
- * then configure the vif. Since the vif is not
- * associated, we would remove the station here and
- * this would fail the recovery.
- */
- iwl_mvm_mld_vif_delete_all_stas(mvm, vif);
+ iwl_mvm_bss_info_changed_station_assoc(mvm, vif, changes);
}
- iwl_mvm_bss_info_changed_station_assoc(mvm, vif, changes);
+ if (changes & BSS_CHANGED_PS) {
+ ret = iwl_mvm_power_update_mac(mvm);
+ if (ret)
+ IWL_ERR(mvm, "failed to update power mode\n");
+ }
}
static void
--
2.38.1
reply other threads:[~2023-09-05 16:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid \
--to=gregory.greenman@intel.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=sultan@kerneltoast.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).