From: Kalle Valo <kvalo@kernel.org>
To: linux-wireless@vger.kernel.org
Subject: [PATCH 2/2] wifi: mac80211: rename struct cfg80211_rx_assoc_resp to cfg80211_rx_assoc_resp_data
Date: Thu, 12 Oct 2023 14:42:29 +0300 [thread overview]
Message-ID: <20231012114229.2931808-3-kvalo@kernel.org> (raw)
In-Reply-To: <20231012114229.2931808-1-kvalo@kernel.org>
From: Kalle Valo <quic_kvalo@quicinc.com>
make htmldocs warns:
Documentation/driver-api/80211/cfg80211:48: ./include/net/cfg80211.h:7290: WARNING: Duplicate C declaration, also defined at cfg80211:7251.
Declaration is '.. c:function:: void cfg80211_rx_assoc_resp (struct net_device *dev, struct cfg80211_rx_assoc_resp *data)'.
This is because there's a function named cfg80211_rx_assoc_resp() and a struct
named cfg80211_rx_assoc_resp, see previous patch for more info.
To workaround this rename the struct to cfg80211_rx_assoc_resp_data. The
parameter for the function is named 'data' anyway so the naming here is
consistent.
Compile tested only.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
include/net/cfg80211.h | 8 ++++----
net/mac80211/mlme.c | 2 +-
net/wireless/mlme.c | 2 +-
net/wireless/nl80211.c | 2 +-
net/wireless/nl80211.h | 2 +-
net/wireless/trace.h | 2 +-
6 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a9ef43b33748..b0a50b32a8bb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -7269,7 +7269,7 @@ void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len);
void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
/**
- * struct cfg80211_rx_assoc_resp - association response data
+ * struct cfg80211_rx_assoc_resp_data - association response data
* @bss: the BSS that association was requested with, ownership of the pointer
* moves to cfg80211 in the call to cfg80211_rx_assoc_resp()
* @buf: (Re)Association Response frame (header + body)
@@ -7284,7 +7284,7 @@ void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
* @links.status: Set this (along with a BSS pointer) for links that
* were rejected by the AP.
*/
-struct cfg80211_rx_assoc_resp {
+struct cfg80211_rx_assoc_resp_data {
const u8 *buf;
size_t len;
const u8 *req_ies;
@@ -7301,7 +7301,7 @@ struct cfg80211_rx_assoc_resp {
/**
* cfg80211_rx_assoc_resp - notification of processed association response
* @dev: network device
- * @data: association response data, &struct cfg80211_rx_assoc_resp
+ * @data: association response data, &struct cfg80211_rx_assoc_resp_data
*
* After being asked to associate via cfg80211_ops::assoc() the driver must
* call either this function or cfg80211_auth_timeout().
@@ -7309,7 +7309,7 @@ struct cfg80211_rx_assoc_resp {
* This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
void cfg80211_rx_assoc_resp(struct net_device *dev,
- struct cfg80211_rx_assoc_resp *data);
+ struct cfg80211_rx_assoc_resp_data *data);
/**
* struct cfg80211_assoc_failure - association failure data
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 8d2514a9a6c4..3950b823ed41 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -5266,7 +5266,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
.u.mlme.data = ASSOC_EVENT,
};
struct ieee80211_prep_tx_info info = {};
- struct cfg80211_rx_assoc_resp resp = {
+ struct cfg80211_rx_assoc_resp_data resp = {
.uapsd_queues = -1,
};
u8 ap_mld_addr[ETH_ALEN] __aligned(2);
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 579fea2f3548..f90f58c65688 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -22,7 +22,7 @@
void cfg80211_rx_assoc_resp(struct net_device *dev,
- struct cfg80211_rx_assoc_resp *data)
+ struct cfg80211_rx_assoc_resp_data *data)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct wiphy *wiphy = wdev->wiphy;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2650543dcebe..d468e015d828 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -17799,7 +17799,7 @@ void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
- struct cfg80211_rx_assoc_resp *data)
+ struct cfg80211_rx_assoc_resp_data *data)
{
nl80211_send_mlme_event(rdev, netdev, data->buf, data->len,
NL80211_CMD_ASSOCIATE, GFP_KERNEL,
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index b4af53f9b227..3edd53c38912 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -60,7 +60,7 @@ void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
const u8 *buf, size_t len, gfp_t gfp);
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
- struct cfg80211_rx_assoc_resp *data);
+ struct cfg80211_rx_assoc_resp_data *data);
void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
const u8 *buf, size_t len,
diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index f6667bf3fd12..30cd1bd58aac 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -2928,7 +2928,7 @@ DEFINE_EVENT(netdev_evt_only, cfg80211_send_rx_auth,
TRACE_EVENT(cfg80211_send_rx_assoc,
TP_PROTO(struct net_device *netdev,
- struct cfg80211_rx_assoc_resp *data),
+ struct cfg80211_rx_assoc_resp_data *data),
TP_ARGS(netdev, data),
TP_STRUCT__entry(
NETDEV_ENTRY
--
2.39.2
prev parent reply other threads:[~2023-10-12 11:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-12 11:42 [PATCH 0/2] wifi: mac80211: workaround the two remaining htmldocs warnings Kalle Valo
2023-10-12 11:42 ` [PATCH 1/2] wifi: mac80211: rename ieee80211_tx_status() to ieee80211_tx_status_skb() Kalle Valo
2023-10-12 11:42 ` Kalle Valo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231012114229.2931808-3-kvalo@kernel.org \
--to=kvalo@kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).