[PATCH RFC 3/8] wifi: ath11k: handle irq enable/disable in several code path

[Kalle Valo <kvalo@kernel.org>]

From: Baochen Qiang <quic_bqiang@quicinc.com>

For non WoW suspend/resume, ath11k host powers down whole hardware
when suspend and power up it when resume, the code path it goes
through is very like the ath11k reset logic.

In order to reuse that logic, do some IRQ management work to make
it work.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 0c6ecbb9a066..fbd6b6a0e12c 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -852,9 +852,6 @@ int ath11k_core_resume(struct ath11k_base *ab)
 		return ret;
 	}
 
-	ath11k_hif_ce_irq_enable(ab);
-	ath11k_hif_irq_enable(ab);
-
 	ret = ath11k_dp_rx_pktlog_start(ab);
 	if (ret) {
 		ath11k_warn(ab, "failed to start rx pktlog during resume: %d\n",
@@ -1775,10 +1772,9 @@ static int ath11k_core_reconfigure_on_crash(struct ath11k_base *ab)
 
 	mutex_lock(&ab->core_lock);
 	ath11k_thermal_unregister(ab);
-	ath11k_hif_irq_disable(ab);
 	ath11k_dp_pdev_free(ab);
 	ath11k_spectral_deinit(ab);
-	ath11k_hif_stop(ab);
+	ath11k_ce_cleanup_pipes(ab);
 	ath11k_wmi_detach(ab);
 	ath11k_dp_pdev_reo_cleanup(ab);
 	mutex_unlock(&ab->core_lock);
@@ -2033,8 +2029,8 @@ static void ath11k_core_reset(struct work_struct *work)
 	time_left = wait_for_completion_timeout(&ab->recovery_start,
 						ATH11K_RECOVER_START_TIMEOUT_HZ);
 
-	ath11k_hif_power_down(ab);
-	ath11k_hif_power_up(ab);
+	ath11k_hif_irq_disable(ab);
+	ath11k_hif_ce_irq_disable(ab);
 
 	ath11k_dbg(ab, ATH11K_DBG_BOOT, "reset started\n");
 }
-- 
2.39.2