[PATCH] mac80211: Ensure bss-coloring is always configured

[greearb@candelatech.com]

From: Ben Greear <greearb@candelatech.com>

Old code would not set it to disabled, just assumed that driver
would default to disabled.  Change this to explicitly request
bss color be flushed on initial driver configuration.

And I think the beacon-change logic was slightly wrong, so adjust
that as well.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 net/mac80211/cfg.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1c7fb0959cfd..1a6c6c764cbc 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1331,8 +1331,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 			      IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
 		changed |= BSS_CHANGED_HE_OBSS_PD;
 
-		if (params->beacon.he_bss_color.enabled)
-			changed |= BSS_CHANGED_HE_BSS_COLOR;
+		changed |= BSS_CHANGED_HE_BSS_COLOR;
 	}
 
 	if (params->he_cap) {
@@ -1512,6 +1511,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
 	int err;
 	struct ieee80211_bss_conf *link_conf;
 	u64 changed = 0;
+	bool color_en;
 
 	lockdep_assert_wiphy(wiphy);
 
@@ -1549,9 +1549,9 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev,
 		return err;
 	changed |= err;
 
-	if (beacon->he_bss_color_valid &&
-	    beacon->he_bss_color.enabled != link_conf->he_bss_color.enabled) {
-		link_conf->he_bss_color.enabled = beacon->he_bss_color.enabled;
+	color_en = beacon->he_bss_color.enabled && beacon->he_bss_color_valid;
+	if (color_en != link_conf->he_bss_color.enabled) {
+		link_conf->he_bss_color.enabled = color_en;
 		changed |= BSS_CHANGED_HE_BSS_COLOR;
 	}
 
-- 
2.41.0