linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Martin Kaistra <martin.kaistra@linutronix.de>
To: linux-wireless@vger.kernel.org
Cc: Jes Sorensen <Jes.Sorensen@gmail.com>,
	Ping-Ke Shih <pkshih@realtek.com>,
	Bitterblue Smith <rtl8821cerfe2@gmail.com>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	stable@vger.kernel.org
Subject: [PATCH 2/2] wifi: rtl8xxxu: enable MFP support
Date: Wed, 17 Apr 2024 11:33:52 +0200	[thread overview]
Message-ID: <20240417093352.1840632-3-martin.kaistra@linutronix.de> (raw)
In-Reply-To: <20240417093352.1840632-1-martin.kaistra@linutronix.de>

In order to connect to networks which require 802.11w, add the
MFP_CAPABLE flag and let mac80211 do the actual crypto in software.

When a robust management frame is received, rx_dec->swdec is not set,
even though the HW did not decrypt it. Extend the check and don't set
RX_FLAG_DECRYPTED for these frames in order to use SW decryption.

Use the security flag in the RX descriptor for this purpose, like it is
done in the rtw88 driver.

Cc: stable@vger.kernel.org
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h      | 9 +++++++++
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 7 +++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index fd92d23c43d91..4f2615dbfd0f0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -122,6 +122,15 @@ enum rtl8xxxu_rx_type {
 	RX_TYPE_ERROR = -1
 };
 
+enum rtw_rx_desc_enc {
+	RX_DESC_ENC_NONE	= 0,
+	RX_DESC_ENC_WEP40	= 1,
+	RX_DESC_ENC_TKIP_WO_MIC	= 2,
+	RX_DESC_ENC_TKIP_MIC	= 3,
+	RX_DESC_ENC_AES		= 4,
+	RX_DESC_ENC_WEP104	= 5,
+};
+
 struct rtl8xxxu_rxdesc16 {
 #ifdef __LITTLE_ENDIAN
 	u32 pktlen:14;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 4a49f8f9d80f2..b15a30a54259e 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -6473,7 +6473,8 @@ int rtl8xxxu_parse_rxdesc16(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
 			rx_status->mactime = rx_desc->tsfl;
 			rx_status->flag |= RX_FLAG_MACTIME_START;
 
-			if (!rx_desc->swdec)
+			if (!rx_desc->swdec &&
+			    rx_desc->security != RX_DESC_ENC_NONE)
 				rx_status->flag |= RX_FLAG_DECRYPTED;
 			if (rx_desc->crc32)
 				rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
@@ -6578,7 +6579,8 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb)
 			rx_status->mactime = rx_desc->tsfl;
 			rx_status->flag |= RX_FLAG_MACTIME_START;
 
-			if (!rx_desc->swdec)
+			if (!rx_desc->swdec &&
+			    rx_desc->security != RX_DESC_ENC_NONE)
 				rx_status->flag |= RX_FLAG_DECRYPTED;
 			if (rx_desc->crc32)
 				rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
@@ -7998,6 +8000,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface,
 	ieee80211_hw_set(hw, HAS_RATE_CONTROL);
 	ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
+	ieee80211_hw_set(hw, MFP_CAPABLE);
 
 	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
 
-- 
2.39.2


  parent reply	other threads:[~2024-04-17  9:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-17  9:33 [PATCH 0/2] wifi: rtl8xxxu: WPA3 support Martin Kaistra
2024-04-17  9:33 ` [PATCH 1/2] Revert "wifi: rtl8xxxu: enable MFP support" Martin Kaistra
2024-04-17  9:33 ` Martin Kaistra [this message]
2024-04-18  0:19   ` [PATCH 2/2] wifi: rtl8xxxu: enable MFP support Ping-Ke Shih
2024-04-18  6:47     ` Martin Kaistra
2024-04-18  6:54       ` Ping-Ke Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240417093352.1840632-3-martin.kaistra@linutronix.de \
    --to=martin.kaistra@linutronix.de \
    --cc=Jes.Sorensen@gmail.com \
    --cc=bigeasy@linutronix.de \
    --cc=linux-wireless@vger.kernel.org \
    --cc=pkshih@realtek.com \
    --cc=rtl8821cerfe2@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).