linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wojciech Dubowik <dubowoj@neratec.com>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 4/9] ath5k: AHB port. Use generic eeprom read from common ath_bus_opts structure.
Date: Thu, 11 Nov 2010 15:58:01 +0100 (CET)	[thread overview]
Message-ID: <22205438.1071289487479070.JavaMail.wlan@CHBU500181> (raw)
In-Reply-To: <19249879.711289486676029.JavaMail.wlan@CHBU500181>

Replaces specific pci eeprom read function.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
---
 drivers/net/wireless/ath/ath5k/ath5k.h  |    5 ++++
 drivers/net/wireless/ath/ath5k/eeprom.c |   38 +-----------------------------
 drivers/net/wireless/ath/ath5k/eeprom.h |    2 +-
 drivers/net/wireless/ath/ath5k/pci.c    |   36 +++++++++++++++++++++++++++++
 4 files changed, 44 insertions(+), 37 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 2524a6c..2b9d693 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1314,6 +1314,11 @@ static inline void ath5k_read_cachesize(struct ath_common *common, int *csz)
 	common->bus_ops->read_cachesize(common, csz);
 }
 
+static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 offset, u16 *data)
+{
+	return ath5k_hw_common(ah)->bus_ops->eeprom_read(ath5k_hw_common(ah), offset, data);
+}
+
 static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
 {
 	u32 retval = 0, bit, i;
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 39722dd..d0c92ed 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -29,40 +29,6 @@
 #include "base.h"
 
 /*
- * Read from eeprom
- */
-static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
-{
-	u32 status, timeout;
-
-	/*
-	 * Initialize EEPROM access
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
-		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
-	} else {
-		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_READ);
-	}
-
-	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
-		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
-		if (status & AR5K_EEPROM_STAT_RDDONE) {
-			if (status & AR5K_EEPROM_STAT_RDERR)
-				return -EIO;
-			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
-					0xffff);
-			return 0;
-		}
-		udelay(15);
-	}
-
-	return -ETIMEDOUT;
-}
-
-/*
  * Translate binary channel representation in EEPROM to frequency
  */
 static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin,
@@ -1797,12 +1763,12 @@ int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
 	u16 data;
 	int octet, ret;
 
-	ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
+	ret = ath5k_hw_nvram_read(ah, 0x20, &data);
 	if (ret)
 		return ret;
 
 	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
-		ret = ath5k_hw_eeprom_read(ah, offset, &data);
+		ret = ath5k_hw_nvram_read(ah, offset, &data);
 		if (ret)
 			return ret;
 
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index c4a6d5f..0017006 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -241,7 +241,7 @@ enum ath5k_eeprom_freq_bands{
 #define	AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz	6250
 
 #define AR5K_EEPROM_READ(_o, _v) do {			\
-	ret = ath5k_hw_eeprom_read(ah, (_o), &(_v));	\
+	ret = ath5k_hw_nvram_read(ah, (_o), &(_v));	\
 	if (ret)					\
 		return ret;				\
 } while (0)
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 0653659..0d8dd2d 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -65,10 +65,46 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
 		*csz = L1_CACHE_BYTES >> 2;   /* Use the default size */
 }
 
+/*
+ * Read from eeprom
+ */
+bool ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
+{
+	struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
+	u32 status, timeout;
+
+	/*
+	 * Initialize EEPROM access
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+	} else {
+		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+				AR5K_EEPROM_CMD_READ);
+	}
+
+	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+		if (status & AR5K_EEPROM_STAT_RDDONE) {
+			if (status & AR5K_EEPROM_STAT_RDERR)
+				return -EIO;
+			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+					0xffff);
+			return 0;
+		}
+		udelay(15);
+	}
+
+	return -ETIMEDOUT;
+}
+
 /* Common ath_bus_opts structure */
 static const struct ath_bus_ops ath_pci_bus_ops = {
 	.ath_bus_type = ATH_PCI,
 	.read_cachesize = ath5k_pci_read_cachesize,
+	.eeprom_read = ath5k_pci_eeprom_read,
 };
 
 /********************\
-- 
1.7.1


       reply	other threads:[~2010-11-11 14:58 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <19249879.711289486676029.JavaMail.wlan@CHBU500181>
2010-11-11 14:58 ` Wojciech Dubowik [this message]
2010-11-12 19:36   ` [PATCH 4/9] ath5k: AHB port. Use generic eeprom read from common ath_bus_opts structure Bob Copeland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=22205438.1071289487479070.JavaMail.wlan@CHBU500181 \
    --to=dubowoj@neratec.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).