Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Alexander Lobakin]

Alexander Lobakin wrote 25.11.2019 10:54:
> Nicholas Johnson wrote 25.11.2019 10:29:
>> Hi,
>> 
>> On Wed, Oct 16, 2019 at 10:31:31AM +0300, Alexander Lobakin wrote:
>>> David Miller wrote 16.10.2019 04:16:
>>> > From: Alexander Lobakin <alobakin@dlink.ru>
>>> > Date: Mon, 14 Oct 2019 11:00:33 +0300
>>> >
>>> > > Commit 323ebb61e32b4 ("net: use listified RX for handling GRO_NORMAL
>>> > > skbs") made use of listified skb processing for the users of
>>> > > napi_gro_frags().
>>> > > The same technique can be used in a way more common napi_gro_receive()
>>> > > to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers
>>> > > including gro_cells and mac80211 users.
>>> > > This slightly changes the return value in cases where skb is being
>>> > > dropped by the core stack, but it seems to have no impact on related
>>> > > drivers' functionality.
>>> > > gro_normal_batch is left untouched as it's very individual for every
>>> > > single system configuration and might be tuned in manual order to
>>> > > achieve an optimal performance.
>>> > >
>>> > > Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
>>> > > Acked-by: Edward Cree <ecree@solarflare.com>
>>> >
>>> > Applied, thank you.
>>> 
>>> David, Edward, Eric, Ilias,
>>> thank you for your time.
>>> 
>>> Regards,
>>> ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ
>> 
>> I am very sorry to be the bearer of bad news. It appears that this
>> commit is causing a regression in Linux 5.4.0-rc8-next-20191122,
>> preventing me from connecting to Wi-Fi networks. I have a Dell XPS 
>> 9370
>> (Intel Core i7-8650U) with Intel Wireless 8265 [8086:24fd].
> 
> Hi!
> 
> It's a bit strange as this commit doesn't directly affect the packet
> flow. I don't have any iwlwifi hardware at the moment, so let's see if
> anyone else will be able to reproduce this (for now, it is the first
> report in a ~6 weeks after applying to net-next).
> Anyway, I'll investigate iwlwifi's Rx processing -- maybe I could find
> something driver-specific that might produce this.
> 
> Thank you for the report.
> 
>> I did a bisect, and this commit was named the culprit. I then applied
>> the reverse patch on another clone of Linux next-20191122, and it
>> started working.
>> 
>> 6570bc79c0dfff0f228b7afd2de720fb4e84d61d
>> net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()
>> 
>> You can see more at the bug report I filed at [0].
>> 
>> [0]
>> https://bugzilla.kernel.org/show_bug.cgi?id=205647
>> 
>> I called on others at [0] to try to reproduce this - you should not 
>> pull
>> a patch because of a single reporter - as I could be wrong.
>> 
>> Please let me know if you want me to give more debugging information 
>> or
>> test any potential fixes. I am happy to help to fix this. :)

And you can also set /proc/sys/net/core/gro_normal_batch to the value
of 1 and see if there are any changes. This value makes GRO stack to
behave just like without the patch.

>> Kind regards,
>> Nicholas Johnson
> 
> Regards,
> ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Regards,
ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Nicholas Johnson]

On Mon, Nov 25, 2019 at 11:25:50AM +0300, Alexander Lobakin wrote:
> Alexander Lobakin wrote 25.11.2019 10:54:
> > Nicholas Johnson wrote 25.11.2019 10:29:
> > > Hi,
> > > 
> > > On Wed, Oct 16, 2019 at 10:31:31AM +0300, Alexander Lobakin wrote:
> > > > David Miller wrote 16.10.2019 04:16:
> > > > > From: Alexander Lobakin <alobakin@dlink.ru>
> > > > > Date: Mon, 14 Oct 2019 11:00:33 +0300
> > > > >
> > > > > > Commit 323ebb61e32b4 ("net: use listified RX for handling GRO_NORMAL
> > > > > > skbs") made use of listified skb processing for the users of
> > > > > > napi_gro_frags().
> > > > > > The same technique can be used in a way more common napi_gro_receive()
> > > > > > to speed up non-merged (GRO_NORMAL) skbs for a wide range of drivers
> > > > > > including gro_cells and mac80211 users.
> > > > > > This slightly changes the return value in cases where skb is being
> > > > > > dropped by the core stack, but it seems to have no impact on related
> > > > > > drivers' functionality.
> > > > > > gro_normal_batch is left untouched as it's very individual for every
> > > > > > single system configuration and might be tuned in manual order to
> > > > > > achieve an optimal performance.
> > > > > >
> > > > > > Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
> > > > > > Acked-by: Edward Cree <ecree@solarflare.com>
> > > > >
> > > > > Applied, thank you.
> > > > 
> > > > David, Edward, Eric, Ilias,
> > > > thank you for your time.
> > > > 
> > > > Regards,
> > > > ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ
> > > 
> > > I am very sorry to be the bearer of bad news. It appears that this
> > > commit is causing a regression in Linux 5.4.0-rc8-next-20191122,
> > > preventing me from connecting to Wi-Fi networks. I have a Dell XPS
> > > 9370
> > > (Intel Core i7-8650U) with Intel Wireless 8265 [8086:24fd].
> > 
> > Hi!
> > 
> > It's a bit strange as this commit doesn't directly affect the packet
> > flow. I don't have any iwlwifi hardware at the moment, so let's see if
> > anyone else will be able to reproduce this (for now, it is the first
> > report in a ~6 weeks after applying to net-next).
> > Anyway, I'll investigate iwlwifi's Rx processing -- maybe I could find
> > something driver-specific that might produce this.
Just in case, I double checked by reapplying the patch to check it is 
the problem. The problem reappeared. So I am sure.

Here's what I will do. I know somebody with the same Dell XPS 9370, 
except theirs has the Intel Core i7 8550U and Killer Wi-Fi. Mine is the 
"business" model, which was harder to obtain. I have been doing bisects 
on a USB-C SSD because I do not have enough space on the internal NVMe 
drive. I will ask to borrow their laptop, and boot off the drive as I 
have been doing with my laptop. If the problem does not appear on their 
laptop, then there is a good chance that the problem is specific to 
iwlwifi.

> > 
> > Thank you for the report.
> > 
> > > I did a bisect, and this commit was named the culprit. I then applied
> > > the reverse patch on another clone of Linux next-20191122, and it
> > > started working.
> > > 
> > > 6570bc79c0dfff0f228b7afd2de720fb4e84d61d
> > > net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()
> > > 
> > > You can see more at the bug report I filed at [0].
> > > 
> > > [0]
> > > https://bugzilla.kernel.org/show_bug.cgi?id=205647
> > > 
> > > I called on others at [0] to try to reproduce this - you should not
> > > pull
> > > a patch because of a single reporter - as I could be wrong.
> > > 
> > > Please let me know if you want me to give more debugging information
> > > or
> > > test any potential fixes. I am happy to help to fix this. :)
> 
> And you can also set /proc/sys/net/core/gro_normal_batch to the value
> of 1 and see if there are any changes. This value makes GRO stack to
> behave just like without the patch.
The default value of /proc/sys/net/core/gro_normal_batch was 8.

Setting it to 1 allowed it to connect to Wi-Fi network.

Setting it back to 8 did not kill the connection.

But when I disconnected and tried to reconnect, it did not re-connect.

Hence, it appears that the problem only affects the initial handshake 
when associating with a network, and not normal packet flow.

> 
> > > Kind regards,
> > > Nicholas Johnson
> > 
> > Regards,
> > ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ
> 
> Regards,
> ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Regards,
Nicholas

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Edward Cree]

On 25/11/2019 09:09, Nicholas Johnson wrote:
> The default value of /proc/sys/net/core/gro_normal_batch was 8.
> Setting it to 1 allowed it to connect to Wi-Fi network.
>
> Setting it back to 8 did not kill the connection.
>
> But when I disconnected and tried to reconnect, it did not re-connect.
>
> Hence, it appears that the problem only affects the initial handshake 
> when associating with a network, and not normal packet flow.
That sounds like the GRO batch isn't getting flushed at the endof the
 NAPI — maybe the driver isn't calling napi_complete_done() at the
 appropriate time?
Indeed, from digging through the layers of iwlwifi I eventually get to
 iwl_pcie_rx_handle() which doesn't really have a NAPI poll (the
 napi->poll function is iwl_pcie_dummy_napi_poll() { WARN_ON(1);
 return 0; }) and instead calls napi_gro_flush() at the end of its RX
 handling.  Unfortunately, napi_gro_flush() is no longer enough,
 because it doesn't call gro_normal_list() so the packets on the
 GRO_NORMAL list just sit there indefinitely.

It was seeing drivers calling napi_gro_flush() directly that had me
 worried in the first place about whether listifying napi_gro_receive()
 was safe and where the gro_normal_list() should go.
I wondered if other drivers that show up in [1] needed fixing with a
 gro_normal_list() next to their napi_gro_flush() call.  From a cursory
 check:
brocade/bna: has a real poller, calls napi_complete_done() so is OK.
cortina/gemini: calls napi_complete_done() straight after
 napi_gro_flush(), so is OK.
hisilicon/hns3: calls napi_complete(), so is _probably_ OK.
But it's far from clear to me why *any* of those drivers are calling
 napi_gro_flush() themselves...

-Ed

[1]: https://elixir.bootlin.com/linux/latest/ident/napi_gro_flush

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Alexander Lobakin]

Edward Cree wrote 25.11.2019 13:31:
> On 25/11/2019 09:09, Nicholas Johnson wrote:
>> The default value of /proc/sys/net/core/gro_normal_batch was 8.
>> Setting it to 1 allowed it to connect to Wi-Fi network.
>> 
>> Setting it back to 8 did not kill the connection.
>> 
>> But when I disconnected and tried to reconnect, it did not re-connect.
>> 
>> Hence, it appears that the problem only affects the initial handshake
>> when associating with a network, and not normal packet flow.
> That sounds like the GRO batch isn't getting flushed at the endof the
>  NAPI — maybe the driver isn't calling napi_complete_done() at the
>  appropriate time?

Yes, this was the first reason I thought about, but didn't look at
iwlwifi yet. I already knew this driver has some tricky parts, but
this 'fake NAPI' solution seems rather strange to me.

> Indeed, from digging through the layers of iwlwifi I eventually get to
>  iwl_pcie_rx_handle() which doesn't really have a NAPI poll (the
>  napi->poll function is iwl_pcie_dummy_napi_poll() { WARN_ON(1);
>  return 0; }) and instead calls napi_gro_flush() at the end of its RX
>  handling.  Unfortunately, napi_gro_flush() is no longer enough,
>  because it doesn't call gro_normal_list() so the packets on the
>  GRO_NORMAL list just sit there indefinitely.
> 
> It was seeing drivers calling napi_gro_flush() directly that had me
>  worried in the first place about whether listifying napi_gro_receive()
>  was safe and where the gro_normal_list() should go.
> I wondered if other drivers that show up in [1] needed fixing with a
>  gro_normal_list() next to their napi_gro_flush() call.  From a cursory
>  check:
> brocade/bna: has a real poller, calls napi_complete_done() so is OK.
> cortina/gemini: calls napi_complete_done() straight after
>  napi_gro_flush(), so is OK.
> hisilicon/hns3: calls napi_complete(), so is _probably_ OK.
> But it's far from clear to me why *any* of those drivers are calling
>  napi_gro_flush() themselves...

Agree. I mean, we _can_ handle this particular problem from networking
core side, but from my point of view only rethinking driver's logic is
the correct way to solve this and other issues that may potentionally
appear in future.

> -Ed
> 
> [1]: https://elixir.bootlin.com/linux/latest/ident/napi_gro_flush

Regards,
ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Johannes Berg]

On Mon, 2019-11-25 at 13:58 +0300, Alexander Lobakin wrote:
> Edward Cree wrote 25.11.2019 13:31:
> > On 25/11/2019 09:09, Nicholas Johnson wrote:
> > > The default value of /proc/sys/net/core/gro_normal_batch was 8.
> > > Setting it to 1 allowed it to connect to Wi-Fi network.
> > > 
> > > Setting it back to 8 did not kill the connection.
> > > 
> > > But when I disconnected and tried to reconnect, it did not re-connect.
> > > 
> > > Hence, it appears that the problem only affects the initial handshake
> > > when associating with a network, and not normal packet flow.
> > That sounds like the GRO batch isn't getting flushed at the endof the
> >  NAPI — maybe the driver isn't calling napi_complete_done() at the
> >  appropriate time?
> 
> Yes, this was the first reason I thought about, but didn't look at
> iwlwifi yet. I already knew this driver has some tricky parts, but
> this 'fake NAPI' solution seems rather strange to me.

Truth be told, we kinda just fudged it until we got GRO, since that's
what we really want on wifi (to reduce the costly TCP ACKs if possible).

Maybe we should call napi_complete_done() instead? But as Edward noted
(below), we don't actually really do NAPI polling, we just fake it for
each interrupt since we will often get a lot of frames in one interrupt
if there's high throughput (A-MPDUs are basically coming in all at the
same time). I've never really looked too much at what exactly happens
here, beyond seeing the difference from GRO.


> > Indeed, from digging through the layers of iwlwifi I eventually get to
> >  iwl_pcie_rx_handle() which doesn't really have a NAPI poll (the
> >  napi->poll function is iwl_pcie_dummy_napi_poll() { WARN_ON(1);
> >  return 0; }) and instead calls napi_gro_flush() at the end of its RX
> >  handling.  Unfortunately, napi_gro_flush() is no longer enough,
> >  because it doesn't call gro_normal_list() so the packets on the
> >  GRO_NORMAL list just sit there indefinitely.
> > 
> > It was seeing drivers calling napi_gro_flush() directly that had me
> >  worried in the first place about whether listifying napi_gro_receive()
> >  was safe and where the gro_normal_list() should go.
> > I wondered if other drivers that show up in [1] needed fixing with a
> >  gro_normal_list() next to their napi_gro_flush() call.  From a cursory
> >  check:
> > brocade/bna: has a real poller, calls napi_complete_done() so is OK.
> > cortina/gemini: calls napi_complete_done() straight after
> >  napi_gro_flush(), so is OK.
> > hisilicon/hns3: calls napi_complete(), so is _probably_ OK.
> > But it's far from clear to me why *any* of those drivers are calling
> >  napi_gro_flush() themselves...
> 
> Agree. I mean, we _can_ handle this particular problem from networking
> core side, but from my point of view only rethinking driver's logic is
> the correct way to solve this and other issues that may potentionally
> appear in future.

Do tell what you think it should be doing :)

One additional wrinkle is that we have firmware notifications, command
completions and actual RX interleaved, so I think we do want to have
interrupts for the notifications and command completions?

johannes

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Paolo Abeni]

On Mon, 2019-11-25 at 12:05 +0100, Johannes Berg wrote:
> On Mon, 2019-11-25 at 13:58 +0300, Alexander Lobakin wrote:
> > Edward Cree wrote 25.11.2019 13:31:
> > > On 25/11/2019 09:09, Nicholas Johnson wrote:
> > > > The default value of /proc/sys/net/core/gro_normal_batch was 8.
> > > > Setting it to 1 allowed it to connect to Wi-Fi network.
> > > > 
> > > > Setting it back to 8 did not kill the connection.
> > > > 
> > > > But when I disconnected and tried to reconnect, it did not re-connect.
> > > > 
> > > > Hence, it appears that the problem only affects the initial handshake
> > > > when associating with a network, and not normal packet flow.
> > > That sounds like the GRO batch isn't getting flushed at the endof the
> > >  NAPI — maybe the driver isn't calling napi_complete_done() at the
> > >  appropriate time?
> > 
> > Yes, this was the first reason I thought about, but didn't look at
> > iwlwifi yet. I already knew this driver has some tricky parts, but
> > this 'fake NAPI' solution seems rather strange to me.
> 
> Truth be told, we kinda just fudged it until we got GRO, since that's
> what we really want on wifi (to reduce the costly TCP ACKs if possible).
> 
> Maybe we should call napi_complete_done() instead? But as Edward noted
> (below), we don't actually really do NAPI polling, we just fake it for
> each interrupt since we will often get a lot of frames in one interrupt
> if there's high throughput (A-MPDUs are basically coming in all at the
> same time). I've never really looked too much at what exactly happens
> here, beyond seeing the difference from GRO.
> 
> 
> > > Indeed, from digging through the layers of iwlwifi I eventually get to
> > >  iwl_pcie_rx_handle() which doesn't really have a NAPI poll (the
> > >  napi->poll function is iwl_pcie_dummy_napi_poll() { WARN_ON(1);
> > >  return 0; }) and instead calls napi_gro_flush() at the end of its RX
> > >  handling.  Unfortunately, napi_gro_flush() is no longer enough,
> > >  because it doesn't call gro_normal_list() so the packets on the
> > >  GRO_NORMAL list just sit there indefinitely.
> > > 
> > > It was seeing drivers calling napi_gro_flush() directly that had me
> > >  worried in the first place about whether listifying napi_gro_receive()
> > >  was safe and where the gro_normal_list() should go.
> > > I wondered if other drivers that show up in [1] needed fixing with a
> > >  gro_normal_list() next to their napi_gro_flush() call.  From a cursory
> > >  check:
> > > brocade/bna: has a real poller, calls napi_complete_done() so is OK.
> > > cortina/gemini: calls napi_complete_done() straight after
> > >  napi_gro_flush(), so is OK.
> > > hisilicon/hns3: calls napi_complete(), so is _probably_ OK.
> > > But it's far from clear to me why *any* of those drivers are calling
> > >  napi_gro_flush() themselves...
> > 
> > Agree. I mean, we _can_ handle this particular problem from networking
> > core side, but from my point of view only rethinking driver's logic is
> > the correct way to solve this and other issues that may potentionally
> > appear in future.
> 
> Do tell what you think it should be doing :)
> 
> One additional wrinkle is that we have firmware notifications, command
> completions and actual RX interleaved, so I think we do want to have
> interrupts for the notifications and command completions?

I think it would be nice moving the iwlwifi driver to full/plain NAPI
mode. The interrupt handler could keep processing extra work as it does
now and queue real pkts on some internal queue, and than schedule the
relevant napi, which in turn could process such queue in the napi poll
method. Likely I missed tons of details and/or oversimplified it...

For -net, I *think* something as dumb and hacky as the following could
possibly work:
----
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 4bba6b8a863c..df82fad96cbb 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1527,7 +1527,7 @@ static void iwl_pcie_rx_handle(struct iwl_trans *trans, int queue)
                iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
 
        if (rxq->napi.poll)
-               napi_gro_flush(&rxq->napi, false);
+               napi_complete_done(&rxq->napi, 0);
 
        iwl_pcie_rxq_restock(trans, rxq);
 }
---

Cheers,

Paolo

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Alexander Lobakin]

Paolo Abeni wrote 25.11.2019 14:42:
> On Mon, 2019-11-25 at 12:05 +0100, Johannes Berg wrote:
>> On Mon, 2019-11-25 at 13:58 +0300, Alexander Lobakin wrote:
>> > Edward Cree wrote 25.11.2019 13:31:
>> > > On 25/11/2019 09:09, Nicholas Johnson wrote:
>> > > > The default value of /proc/sys/net/core/gro_normal_batch was 8.
>> > > > Setting it to 1 allowed it to connect to Wi-Fi network.
>> > > >
>> > > > Setting it back to 8 did not kill the connection.
>> > > >
>> > > > But when I disconnected and tried to reconnect, it did not re-connect.
>> > > >
>> > > > Hence, it appears that the problem only affects the initial handshake
>> > > > when associating with a network, and not normal packet flow.
>> > > That sounds like the GRO batch isn't getting flushed at the endof the
>> > >  NAPI — maybe the driver isn't calling napi_complete_done() at the
>> > >  appropriate time?
>> >
>> > Yes, this was the first reason I thought about, but didn't look at
>> > iwlwifi yet. I already knew this driver has some tricky parts, but
>> > this 'fake NAPI' solution seems rather strange to me.
>> 
>> Truth be told, we kinda just fudged it until we got GRO, since that's
>> what we really want on wifi (to reduce the costly TCP ACKs if 
>> possible).
>> 
>> Maybe we should call napi_complete_done() instead? But as Edward noted
>> (below), we don't actually really do NAPI polling, we just fake it for
>> each interrupt since we will often get a lot of frames in one 
>> interrupt
>> if there's high throughput (A-MPDUs are basically coming in all at the
>> same time). I've never really looked too much at what exactly happens
>> here, beyond seeing the difference from GRO.
>> 
>> 
>> > > Indeed, from digging through the layers of iwlwifi I eventually get to
>> > >  iwl_pcie_rx_handle() which doesn't really have a NAPI poll (the
>> > >  napi->poll function is iwl_pcie_dummy_napi_poll() { WARN_ON(1);
>> > >  return 0; }) and instead calls napi_gro_flush() at the end of its RX
>> > >  handling.  Unfortunately, napi_gro_flush() is no longer enough,
>> > >  because it doesn't call gro_normal_list() so the packets on the
>> > >  GRO_NORMAL list just sit there indefinitely.
>> > >
>> > > It was seeing drivers calling napi_gro_flush() directly that had me
>> > >  worried in the first place about whether listifying napi_gro_receive()
>> > >  was safe and where the gro_normal_list() should go.
>> > > I wondered if other drivers that show up in [1] needed fixing with a
>> > >  gro_normal_list() next to their napi_gro_flush() call.  From a cursory
>> > >  check:
>> > > brocade/bna: has a real poller, calls napi_complete_done() so is OK.
>> > > cortina/gemini: calls napi_complete_done() straight after
>> > >  napi_gro_flush(), so is OK.
>> > > hisilicon/hns3: calls napi_complete(), so is _probably_ OK.
>> > > But it's far from clear to me why *any* of those drivers are calling
>> > >  napi_gro_flush() themselves...
>> >
>> > Agree. I mean, we _can_ handle this particular problem from networking
>> > core side, but from my point of view only rethinking driver's logic is
>> > the correct way to solve this and other issues that may potentionally
>> > appear in future.
>> 
>> Do tell what you think it should be doing :)
>> 
>> One additional wrinkle is that we have firmware notifications, command
>> completions and actual RX interleaved, so I think we do want to have
>> interrupts for the notifications and command completions?
> 
> I think it would be nice moving the iwlwifi driver to full/plain NAPI
> mode. The interrupt handler could keep processing extra work as it does
> now and queue real pkts on some internal queue, and than schedule the
> relevant napi, which in turn could process such queue in the napi poll
> method. Likely I missed tons of details and/or oversimplified it...

Yep, full NAPI is the best variant, but I may miss a lot too.

> For -net, I *think* something as dumb and hacky as the following could
> possibly work:
> ----
> diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> index 4bba6b8a863c..df82fad96cbb 100644
> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> @@ -1527,7 +1527,7 @@ static void iwl_pcie_rx_handle(struct iwl_trans
> *trans, int queue)
>                 iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
> 
>         if (rxq->napi.poll)
> -               napi_gro_flush(&rxq->napi, false);
> +               napi_complete_done(&rxq->napi, 0);
> 
>         iwl_pcie_rxq_restock(trans, rxq);
>  }
> ---

napi_complete_done(napi, 0) has an equivalent static inline
napi_complete(napi). I'm not sure it will work without any issues
as iwlwifi doesn't _really_ turn NAPI into scheduling state.

I'm not very familiar with iwlwifi, but as a work around manual
napi_gro_flush() you can also manually flush napi->rx_list to
prevent packets from stalling:

diff -Naur a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 
b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c	2019-11-25 
14:55:03.610355230 +0300
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c	2019-11-25 
14:57:29.399556868 +0300
@@ -1526,8 +1526,16 @@
  	if (unlikely(emergency && count))
  		iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);

-	if (rxq->napi.poll)
+	if (rxq->napi.poll) {
+		if (rxq->napi.rx_count) {
+			netif_receive_skb_list(&rxq->napi.rx_list);
+
+			INIT_LIST_HEAD(&rxq->napi.rx_list);
+			rxq->napi.rx_count = 0;
+		}
+
  		napi_gro_flush(&rxq->napi, false);
+	}

  	iwl_pcie_rxq_restock(trans, rxq);
  }

> Cheers,
> 
> Paolo

Regards,
ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Kalle Valo]

Paolo Abeni <pabeni@redhat.com> writes:

> On Mon, 2019-11-25 at 12:05 +0100, Johannes Berg wrote:
>> On Mon, 2019-11-25 at 13:58 +0300, Alexander Lobakin wrote:
>>
>> > Agree. I mean, we _can_ handle this particular problem from networking
>> > core side, but from my point of view only rethinking driver's logic is
>> > the correct way to solve this and other issues that may potentionally
>> > appear in future.
>> 
>> Do tell what you think it should be doing :)
>> 
>> One additional wrinkle is that we have firmware notifications, command
>> completions and actual RX interleaved, so I think we do want to have
>> interrupts for the notifications and command completions?
>
> I think it would be nice moving the iwlwifi driver to full/plain NAPI
> mode. The interrupt handler could keep processing extra work as it does
> now and queue real pkts on some internal queue, and than schedule the
> relevant napi, which in turn could process such queue in the napi poll
> method. Likely I missed tons of details and/or oversimplified it...

Sorry for hijacking the thread, but I have a patch pending for ath10k
(another wireless driver) which adds NAPI support to SDIO devices:

https://patchwork.kernel.org/patch/11188393/

I think it does just what you suggested, but I'm no NAPI expert and
would appreciate if someone more knowledgeable could take a look :)

-- 
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Nicholas Johnson]

On Mon, Nov 25, 2019 at 12:42:44PM +0100, Paolo Abeni wrote:
> I think it would be nice moving the iwlwifi driver to full/plain NAPI
> mode. The interrupt handler could keep processing extra work as it does
> now and queue real pkts on some internal queue, and than schedule the
> relevant napi, which in turn could process such queue in the napi poll
> method. Likely I missed tons of details and/or oversimplified it...

It must have something to do with iwlwifi (as if we needed more 
evidence). I just booted a different variant of the Dell XPS 9370 which 
has Qualcomm Wi-Fi [168c:003e] (ath10k_pci.ko), instead of Intel Wi-Fi, 
from the same USB SSD as before, and it has no issues whatsoever.

My regression report quickly blown up to be way over my head in terms of 
understanding, but I will keep monitoring the discussions and try to 
learn from it. Everybody, please keep me CC'd into any further 
communications with driver teams, as I am genuinely interested in the 
journey and the outcome.

> Cheers,
> 
> Paolo
> 
> 
Cheers,
Nicholas

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Nicholas Johnson]

On Mon, Nov 25, 2019 at 10:31:12AM +0000, Edward Cree wrote:
> On 25/11/2019 09:09, Nicholas Johnson wrote:
> > The default value of /proc/sys/net/core/gro_normal_batch was 8.
> > Setting it to 1 allowed it to connect to Wi-Fi network.
> >
> > Setting it back to 8 did not kill the connection.
> >
> > But when I disconnected and tried to reconnect, it did not re-connect.
> >
> > Hence, it appears that the problem only affects the initial handshake 
> > when associating with a network, and not normal packet flow.
> That sounds like the GRO batch isn't getting flushed at the endof the
>  NAPI — maybe the driver isn't calling napi_complete_done() at the
>  appropriate time?
> Indeed, from digging through the layers of iwlwifi I eventually get to
>  iwl_pcie_rx_handle() which doesn't really have a NAPI poll (the
>  napi->poll function is iwl_pcie_dummy_napi_poll() { WARN_ON(1);
>  return 0; }) and instead calls napi_gro_flush() at the end of its RX
>  handling.  Unfortunately, napi_gro_flush() is no longer enough,
>  because it doesn't call gro_normal_list() so the packets on the
>  GRO_NORMAL list just sit there indefinitely.
> 
> It was seeing drivers calling napi_gro_flush() directly that had me
>  worried in the first place about whether listifying napi_gro_receive()
>  was safe and where the gro_normal_list() should go.
> I wondered if other drivers that show up in [1] needed fixing with a
>  gro_normal_list() next to their napi_gro_flush() call.  From a cursory
>  check:
> brocade/bna: has a real poller, calls napi_complete_done() so is OK.
> cortina/gemini: calls napi_complete_done() straight after
>  napi_gro_flush(), so is OK.
> hisilicon/hns3: calls napi_complete(), so is _probably_ OK.
> But it's far from clear to me why *any* of those drivers are calling
>  napi_gro_flush() themselves...
Pardon my lack of understanding, but is it unusual that something that 
the drivers should not be calling be exposed to the drivers? Could it be 
hidden from the drivers so that it is out of scope, once the current 
drivers are modified to not use it?

> 
> -Ed
> 
> [1]: https://elixir.bootlin.com/linux/latest/ident/napi_gro_flush
Kind regards,
Nicholas

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Edward Cree]

On 25/11/2019 12:02, Alexander Lobakin wrote:
> I'm not very familiar with iwlwifi, but as a work around manual
> napi_gro_flush() you can also manually flush napi->rx_list to
> prevent packets from stalling:
>
> diff -Naur a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c    2019-11-25 14:55:03.610355230 +0300
> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c    2019-11-25 14:57:29.399556868 +0300
> @@ -1526,8 +1526,16 @@
>      if (unlikely(emergency && count))
>          iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
>
> -    if (rxq->napi.poll)
> +    if (rxq->napi.poll) {
> +        if (rxq->napi.rx_count) {
> +            netif_receive_skb_list(&rxq->napi.rx_list);
> +
> +            INIT_LIST_HEAD(&rxq->napi.rx_list);
> +            rxq->napi.rx_count = 0;
> +        }
> +
>          napi_gro_flush(&rxq->napi, false);
> +    }
>
>      iwl_pcie_rxq_restock(trans, rxq);
>  }
... or we could export gro_normal_list(), instead of open-coding it
 in the driver?

-Ed

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Alexander Lobakin]

Edward Cree wrote 25.11.2019 16:21:
> On 25/11/2019 12:02, Alexander Lobakin wrote:
>> I'm not very familiar with iwlwifi, but as a work around manual
>> napi_gro_flush() you can also manually flush napi->rx_list to
>> prevent packets from stalling:
>> 
>> diff -Naur a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 
>> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c    2019-11-25 
>> 14:55:03.610355230 +0300
>> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c    2019-11-25 
>> 14:57:29.399556868 +0300
>> @@ -1526,8 +1526,16 @@
>>      if (unlikely(emergency && count))
>>          iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
>> 
>> -    if (rxq->napi.poll)
>> +    if (rxq->napi.poll) {
>> +        if (rxq->napi.rx_count) {
>> +            netif_receive_skb_list(&rxq->napi.rx_list);
>> +
>> +            INIT_LIST_HEAD(&rxq->napi.rx_list);
>> +            rxq->napi.rx_count = 0;
>> +        }
>> +
>>          napi_gro_flush(&rxq->napi, false);
>> +    }
>> 
>>      iwl_pcie_rxq_restock(trans, rxq);
>>  }
> ... or we could export gro_normal_list(), instead of open-coding it
>  in the driver?

I thought about this too, but don't like it. This patch is proposed as
a *very* temporary solution until iwlwifi will get more straightforward
logic. I wish we could make napi_gro_flush() static in the future and
keep gro_normal_list() private to:

- prevent them from using in any new drivers;
- give more opportunity to CC to optimize the core code.

> 
> -Ed

Regards,
ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[David Miller]

From: Alexander Lobakin <alobakin@dlink.ru>
Date: Mon, 25 Nov 2019 15:02:24 +0300

> Paolo Abeni wrote 25.11.2019 14:42:
>> For -net, I *think* something as dumb and hacky as the following could
>> possibly work:
>> ----
>> diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> index 4bba6b8a863c..df82fad96cbb 100644
>> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> @@ -1527,7 +1527,7 @@ static void iwl_pcie_rx_handle(struct iwl_trans
>> *trans, int queue)
>>                 iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
>>         if (rxq->napi.poll)
>> -               napi_gro_flush(&rxq->napi, false);
>> +               napi_complete_done(&rxq->napi, 0);
>>         iwl_pcie_rxq_restock(trans, rxq);
>>  }
>> ---
> 
> napi_complete_done(napi, 0) has an equivalent static inline
> napi_complete(napi). I'm not sure it will work without any issues
> as iwlwifi doesn't _really_ turn NAPI into scheduling state.
> 
> I'm not very familiar with iwlwifi, but as a work around manual
> napi_gro_flush() you can also manually flush napi->rx_list to
> prevent packets from stalling:
> 
> diff -Naur a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 2019-11-25
> --- 14:55:03.610355230 +0300
> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 2019-11-25
> 14:57:29.399556868 +0300
 ...

Thanks to everyone for looking into this.

Can I get some kind of fix in the next 24 hours?  I want to send a quick
follow-on pull request to Linus to deal with all of the fallout, and in
particular fix this regression.

Thanks!

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Alexander Lobakin]

David Miller wrote 27.11.2019 02:57:
> From: Alexander Lobakin <alobakin@dlink.ru>
> Date: Mon, 25 Nov 2019 15:02:24 +0300
> 
>> Paolo Abeni wrote 25.11.2019 14:42:
>>> For -net, I *think* something as dumb and hacky as the following 
>>> could
>>> possibly work:
>>> ----
>>> diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> index 4bba6b8a863c..df82fad96cbb 100644
>>> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> @@ -1527,7 +1527,7 @@ static void iwl_pcie_rx_handle(struct iwl_trans
>>> *trans, int queue)
>>>                 iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
>>>         if (rxq->napi.poll)
>>> -               napi_gro_flush(&rxq->napi, false);
>>> +               napi_complete_done(&rxq->napi, 0);
>>>         iwl_pcie_rxq_restock(trans, rxq);
>>>  }
>>> ---
>> 
>> napi_complete_done(napi, 0) has an equivalent static inline
>> napi_complete(napi). I'm not sure it will work without any issues
>> as iwlwifi doesn't _really_ turn NAPI into scheduling state.
>> 
>> I'm not very familiar with iwlwifi, but as a work around manual
>> napi_gro_flush() you can also manually flush napi->rx_list to
>> prevent packets from stalling:
>> 
>> diff -Naur a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 2019-11-25
>> --- 14:55:03.610355230 +0300
>> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 2019-11-25
>> 14:57:29.399556868 +0300
>  ...
> 
> Thanks to everyone for looking into this.
> 
> Can I get some kind of fix in the next 24 hours?  I want to send a 
> quick
> follow-on pull request to Linus to deal with all of the fallout, and in
> particular fix this regression.

If Intel guys and others will agree, I'll send a patch which will add
manual napi->rx_list flushing in iwlwifi driver in about ~2-3 hours.

Anyway, this driver should get a proper NAPI in future releases to
prevent problems like this one.

> Thanks!

Regards,
ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Johannes Berg]

On Wed, 2019-11-27 at 10:47 +0300, Alexander Lobakin wrote:

> > Can I get some kind of fix in the next 24 hours?  I want to send a 
> > quick
> > follow-on pull request to Linus to deal with all of the fallout, and in
> > particular fix this regression.
> 
> If Intel guys and others will agree, I'll send a patch which will add
> manual napi->rx_list flushing in iwlwifi driver in about ~2-3 hours.

Sounds fine to me.

> Anyway, this driver should get a proper NAPI in future releases to
> prevent problems like this one.

Yeah, we'll work on that, but that might take a bit longer :)

johannes

Re: [PATCH v2 net-next] net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()

[Alexander Lobakin]

David Miller wrote 27.11.2019 02:57:
> From: Alexander Lobakin <alobakin@dlink.ru>
> Date: Mon, 25 Nov 2019 15:02:24 +0300
> 
>> Paolo Abeni wrote 25.11.2019 14:42:
>>> For -net, I *think* something as dumb and hacky as the following 
>>> could
>>> possibly work:
>>> ----
>>> diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> index 4bba6b8a863c..df82fad96cbb 100644
>>> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>>> @@ -1527,7 +1527,7 @@ static void iwl_pcie_rx_handle(struct iwl_trans
>>> *trans, int queue)
>>>                 iwl_pcie_rxq_alloc_rbs(trans, GFP_ATOMIC, rxq);
>>>         if (rxq->napi.poll)
>>> -               napi_gro_flush(&rxq->napi, false);
>>> +               napi_complete_done(&rxq->napi, 0);
>>>         iwl_pcie_rxq_restock(trans, rxq);
>>>  }
>>> ---
>> 
>> napi_complete_done(napi, 0) has an equivalent static inline
>> napi_complete(napi). I'm not sure it will work without any issues
>> as iwlwifi doesn't _really_ turn NAPI into scheduling state.
>> 
>> I'm not very familiar with iwlwifi, but as a work around manual
>> napi_gro_flush() you can also manually flush napi->rx_list to
>> prevent packets from stalling:
>> 
>> diff -Naur a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
>> --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 2019-11-25
>> --- 14:55:03.610355230 +0300
>> +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c 2019-11-25
>> 14:57:29.399556868 +0300
>  ...
> 
> Thanks to everyone for looking into this.
> 
> Can I get some kind of fix in the next 24 hours?  I want to send a 
> quick
> follow-on pull request to Linus to deal with all of the fallout, and in
> particular fix this regression.

The fix is here: [1]
It's pretty straightforward, but needs a minimal testing anyways.
If any changes are needed, please let me know.

> Thanks!

Regards,
ᚷ ᛖ ᚢ ᚦ ᚠ ᚱ

[1] 
https://lore.kernel.org/netdev/20191127094123.18161-1-alobakin@dlink.ru