[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6e3000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000 [ 0.000000] RAMDISK: 375e1000 - 37fef2a3 [ 0.000000] Allocated new RAMDISK: 00100000 - 00b0e2a3 [ 0.000000] Move RAMDISK from 00000000375e1000 - 0000000037fef2a2 to 00100000 - 00b0e2a2 [ 0.000000] ACPI: RSDP 000f7670 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bf6d66f5 0009C (v01 DELL M08 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bf6deb60 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bf6d7c3b 06EB1 (v02 TOSCPL CRESTLNE 06040000 INTL 20060608) [ 0.000000] ACPI: FACS bf6e2fc0 00040 [ 0.000000] ACPI: APIC bf6dec54 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET bf6decbc 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bf6decf4 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TCPA bf6ded30 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR bf6ded62 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: OSFR bf6ded88 00072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000) [ 0.000000] ACPI: APIC bf6dedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bf6dee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC bf6dee8a 00176 (v01 DELL M08 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT bf6d798e 002AD (v01 SataRe SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT bf6d78eb 000A3 (v01 BrtRef DD01BRT 00001000 INTL 20061109) [ 0.000000] ACPI: SSDT bf6d6d1d 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT bf6d6c77 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT bf6d6791 004E6 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2178MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00009000 - 0000fe80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014a9314] TEXT DATA BSS ==> [0001000000 - 00014a9314] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00014aa000 - 00014b0134] BRK ==> [00014aa000 - 00014b0134] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000100000 - 0000b0e2a3] NEW RAMDISK ==> [0000100000 - 0000b0e2a3] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f76f0] f76f0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000bf6d0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf6d0 [ 0.000000] On node 0 totalpages: 783983 [ 0.000000] free_area_init_node: node 0, pgdat c1396fc0, node_mem_map c14b2000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4358 pages used for memmap [ 0.000000] HighMem zone: 553420 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34072 r0 d23272 u2097152 [ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777857 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-686 root=UUID=a4a6af15-8832-438b-ba03-5a506d1bf5d2 ro quiet splash vga=794 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:000bf6d0) [ 0.000000] Memory: 3094288k/3136320k available (2429k kernel code, 40624k reserved, 1284k data, 368k init, 2231112k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13a1000 - 0xc13fd000 ( 368 kB) [ 0.000000] .data : 0xc125f44d - 0xc13a0760 (1284 kB) [ 0.000000] .text : 0xc1000000 - 0xc125f44d (2429 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.574 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.14 BogoMIPS (lpj=7182296) [ 0.004020] Security Framework initialized [ 0.004025] SELinux: Disabled at boot. [ 0.004030] Mount-cache hash table entries: 512 [ 0.008079] Initializing cgroup subsys ns [ 0.008083] Initializing cgroup subsys cpuacct [ 0.008087] Initializing cgroup subsys devices [ 0.008089] Initializing cgroup subsys freezer [ 0.008091] Initializing cgroup subsys net_cls [ 0.008110] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008113] CPU: L2 cache: 2048K [ 0.008116] CPU: Physical Processor ID: 0 [ 0.008117] CPU: Processor Core ID: 0 [ 0.008120] mce: CPU supports 6 MCE banks [ 0.008127] CPU0: Thermal monitoring handled by SMI [ 0.008130] using mwait in idle threads. [ 0.008137] Performance Events: Core2 events, Intel PMU driver. [ 0.008143] ... version: 2 [ 0.008145] ... bit width: 40 [ 0.008147] ... generic registers: 2 [ 0.008148] ... value mask: 000000ffffffffff [ 0.008150] ... max period: 000000007fffffff [ 0.008152] ... fixed-purpose events: 3 [ 0.008154] ... event mask: 0000000700000003 [ 0.008157] Checking 'hlt' instruction... OK. [ 0.025082] ACPI: Core revision 20090903 [ 0.036415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076988] CPU0: Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz stepping 0d [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.164054] CPU1: Intel(R) Core(TM)2 Duo CPU T5670 @ 1.80GHz stepping 0d [ 0.164067] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168047] Brought up 2 CPUs [ 0.168050] Total of 2 processors activated (7182.12 BogoMIPS). [ 0.168487] CPU0 attaching sched-domain: [ 0.168490] domain 0: span 0-1 level MC [ 0.168493] groups: 0 1 [ 0.168499] CPU1 attaching sched-domain: [ 0.168502] domain 0: span 0-1 level MC [ 0.168504] groups: 1 0 [ 0.168651] devtmpfs: initialized [ 0.169042] regulator: core version 0.5 [ 0.169098] NET: Registered protocol family 16 [ 0.169184] ACPI: bus type pci registered [ 0.169255] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.169259] PCI: MCFG area at e0000000 reserved in E820 [ 0.169261] PCI: Using MMCONFIG for extended config space [ 0.169263] PCI: Using configuration type 1 for base access [ 0.169659] bio: create slab at 0 [ 0.170553] ACPI: EC: Look up EC in DSDT [ 0.176057] ACPI: BIOS _OSI(Linux) query ignored [ 0.177102] ACPI: Interpreter enabled [ 0.177111] ACPI: (supports S0 S3 S4 S5) [ 0.177133] ACPI: Using IOAPIC for interrupt routing [ 0.260666] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.261006] ACPI: No dock devices found. [ 0.261613] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.261706] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf80fffff] [ 0.261715] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.261721] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.261763] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.261883] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.261953] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.262030] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8504800-0xf8504bff] [ 0.262098] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.262105] pci 0000:00:1a.7: PME# disabled [ 0.262162] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8500000-0xf8503fff] [ 0.262228] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.262233] pci 0000:00:1b.0: PME# disabled [ 0.262333] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.262339] pci 0000:00:1c.0: PME# disabled [ 0.262442] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.262447] pci 0000:00:1c.1: PME# disabled [ 0.262552] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.262557] pci 0000:00:1c.3: PME# disabled [ 0.262659] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.262665] pci 0000:00:1c.4: PME# disabled [ 0.262735] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.262805] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.262877] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.262952] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8504c00-0xf8504fff] [ 0.263020] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.263026] pci 0000:00:1d.7: PME# disabled [ 0.263210] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.263215] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.263221] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.263226] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 007f) [ 0.263286] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.263295] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.263304] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.263312] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.263321] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.263399] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] [ 0.263408] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] [ 0.263417] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] [ 0.263425] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] [ 0.263434] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.263443] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8504000-0xf85047ff] [ 0.263489] pci 0000:00:1f.2: PME# supported from D3hot [ 0.263494] pci 0000:00:1f.2: PME# disabled [ 0.263530] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.263558] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] [ 0.263651] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.263657] pci 0000:00:1c.0: bridge 32bit mmio: [0xc4000000-0xc7ffffff] [ 0.263666] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xcc000000-0xcdffffff] [ 0.263730] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.263735] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0000000-0xf3ffffff] [ 0.263744] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfa000000-0xfbffffff] [ 0.264114] pci 0000:06:00.0: reg 10 64bit mmio: [0xf4000000-0xf4003fff] [ 0.264338] pci 0000:06:00.0: supports D1 D2 [ 0.264340] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.264353] pci 0000:06:00.0: PME# disabled [ 0.264851] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff] [ 0.264857] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.264866] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xfc000000-0xfdffffff] [ 0.265038] pci 0000:07:00.0: reg 10 io port: [0x5000-0x50ff] [ 0.265117] pci 0000:07:00.0: reg 18 64bit mmio pref: [0xf8610000-0xf8610fff] [ 0.265171] pci 0000:07:00.0: reg 20 64bit mmio pref: [0xf8600000-0xf860ffff] [ 0.265200] pci 0000:07:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.265362] pci 0000:07:00.0: supports D1 D2 [ 0.265364] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.265380] pci 0000:07:00.0: PME# disabled [ 0.265878] pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] [ 0.265889] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf8600000-0xf86fffff] [ 0.265944] pci 0000:08:05.0: reg 10 32bit mmio: [0xf8200000-0xf8200fff] [ 0.265953] pci 0000:08:05.0: reg 14 32bit mmio: [0xf8202000-0xf82027ff] [ 0.266008] pci 0000:08:05.0: supports D1 D2 [ 0.266010] pci 0000:08:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.266016] pci 0000:08:05.0: PME# disabled [ 0.266070] pci 0000:08:05.2: reg 10 32bit mmio: [0xf8202800-0xf82028ff] [ 0.266144] pci 0000:08:05.2: supports D1 D2 [ 0.266147] pci 0000:08:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.266153] pci 0000:08:05.2: PME# disabled [ 0.266205] pci 0000:08:05.3: reg 10 32bit mmio: [0xf8201000-0xf8201fff] [ 0.266281] pci 0000:08:05.3: supports D1 D2 [ 0.266283] pci 0000:08:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.266289] pci 0000:08:05.3: PME# disabled [ 0.266362] pci 0000:00:1e.0: transparent bridge [ 0.266371] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8200000-0xf82fffff] [ 0.266412] pci_bus 0000:00: on NUMA node 0 [ 0.266417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.266668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.266751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.266837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.266918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.267031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.279213] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.279323] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.279429] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.279535] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.279640] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.279747] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.279851] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.279956] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.280057] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.280073] vgaarb: loaded [ 0.280134] PCI: Using ACPI for IRQ routing [ 0.280734] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.280740] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.284009] Switching to clocksource tsc [ 0.285406] pnp: PnP ACPI init [ 0.285415] ACPI: bus type pnp registered [ 0.312030] pnp: PnP ACPI: found 10 devices [ 0.312033] ACPI: ACPI bus type pnp unregistered [ 0.312036] PnPBIOS: Disabled by ACPI PNP [ 0.312046] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.312050] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.312054] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.312057] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.312061] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.312064] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.312068] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.312071] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.312079] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.312086] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.312089] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.312093] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.312096] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.312100] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.312103] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 0.346881] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.346886] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.346893] pci 0000:00:1c.0: MEM window: 0xc4000000-0xc7ffffff [ 0.346899] pci 0000:00:1c.0: PREFETCH window: 0x000000cc000000-0x000000cdffffff [ 0.346908] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.346912] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.346920] pci 0000:00:1c.1: MEM window: 0xf0000000-0xf3ffffff [ 0.346925] pci 0000:00:1c.1: PREFETCH window: 0x000000fa000000-0x000000fbffffff [ 0.346934] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.346939] pci 0000:00:1c.3: IO window: 0x4000-0x4fff [ 0.346945] pci 0000:00:1c.3: MEM window: 0xf4000000-0xf7ffffff [ 0.346951] pci 0000:00:1c.3: PREFETCH window: 0x000000fc000000-0x000000fdffffff [ 0.346961] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 0.346965] pci 0000:00:1c.4: IO window: 0x5000-0x5fff [ 0.346972] pci 0000:00:1c.4: MEM window: 0xc0000000-0xc03fffff [ 0.346978] pci 0000:00:1c.4: PREFETCH window: 0x000000f8600000-0x000000f86fffff [ 0.346987] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 0.346990] pci 0000:00:1e.0: IO window: disabled [ 0.346997] pci 0000:00:1e.0: MEM window: 0xf8200000-0xf82fffff [ 0.347002] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.347022] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.347029] pci 0000:00:1c.0: setting latency timer to 64 [ 0.347041] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.347047] pci 0000:00:1c.1: setting latency timer to 64 [ 0.347059] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.347065] pci 0000:00:1c.3: setting latency timer to 64 [ 0.347076] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.347081] pci 0000:00:1c.4: setting latency timer to 64 [ 0.347090] pci 0000:00:1e.0: setting latency timer to 64 [ 0.347095] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.347099] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.347102] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.347105] pci_bus 0000:02: resource 1 mem: [0xc4000000-0xc7ffffff] [ 0.347108] pci_bus 0000:02: resource 2 pref mem [0xcc000000-0xcdffffff] [ 0.347111] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.347113] pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf3ffffff] [ 0.347116] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfbffffff] [ 0.347119] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] [ 0.347122] pci_bus 0000:06: resource 1 mem: [0xf4000000-0xf7ffffff] [ 0.347125] pci_bus 0000:06: resource 2 pref mem [0xfc000000-0xfdffffff] [ 0.347128] pci_bus 0000:07: resource 0 io: [0x5000-0x5fff] [ 0.347131] pci_bus 0000:07: resource 1 mem: [0xc0000000-0xc03fffff] [ 0.347134] pci_bus 0000:07: resource 2 pref mem [0xf8600000-0xf86fffff] [ 0.347137] pci_bus 0000:08: resource 1 mem: [0xf8200000-0xf82fffff] [ 0.347140] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.347142] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 0.347170] NET: Registered protocol family 2 [ 0.347249] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.347533] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.347952] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.348153] TCP: Hash tables configured (established 131072 bind 65536) [ 0.348156] TCP reno registered [ 0.348228] NET: Registered protocol family 1 [ 0.348246] pci 0000:00:02.0: Boot video device [ 0.348436] Unpacking initramfs... [ 0.641583] Freeing initrd memory: 10296k freed [ 0.647056] Simple Boot Flag at 0x36 set to 0x1 [ 0.647377] audit: initializing netlink socket (disabled) [ 0.647394] type=2000 audit(1271151505.643:1): initialized [ 0.647637] highmem bounce pool size: 64 pages [ 0.647642] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.649154] VFS: Disk quotas dquot_6.5.2 [ 0.649209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.649287] msgmni has been set to 1707 [ 0.649473] alg: No test for stdrng (krng) [ 0.649523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.649526] io scheduler noop registered [ 0.649528] io scheduler anticipatory registered [ 0.649531] io scheduler deadline registered [ 0.649567] io scheduler cfq registered (default) [ 0.649729] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.649742] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.649916] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.649927] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.650096] pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X [ 0.650107] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.650274] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X [ 0.650286] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.650464] isapnp: Scanning for PnP cards... [ 1.004577] isapnp: No Plug & Play device found [ 1.006015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.006419] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.035367] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.035374] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.035468] mice: PS/2 mouse device common for all mice [ 1.036525] rtc_cmos 00:07: RTC can wake from S4 [ 1.036559] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.036592] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.036603] cpuidle: using governor ladder [ 1.036605] cpuidle: using governor menu [ 1.036609] No iBFT detected. [ 1.036956] TCP cubic registered [ 1.037101] NET: Registered protocol family 10 [ 1.037552] lo: Disabled Privacy Extensions [ 1.037867] Mobile IPv6 [ 1.037870] NET: Registered protocol family 17 [ 1.037884] Using IPI No-Shortcut mode [ 1.037947] PM: Resume from disk failed. [ 1.037951] registered taskstats version 1 [ 1.038844] rtc_cmos 00:07: setting system clock to 2010-04-13 09:38:26 UTC (1271151506) [ 1.038908] Freeing unused kernel memory: 368k freed [ 1.039113] Write protecting the kernel text: 2432k [ 1.039137] Write protecting the kernel read-only data: 888k [ 1.064435] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.168456] cfg80211: Using static regulatory domain info [ 1.168459] cfg80211: Regulatory domain: US [ 1.168461] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1.168465] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 1.168468] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.168471] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.168474] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.168477] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 1.168480] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 1.168487] cfg80211: Calling CRDA for country: US [ 1.194060] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.194077] b43-pci-bridge 0000:06:00.0: setting latency timer to 64 [ 1.260265] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0 [ 1.267024] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 1.335974] phy0: Failed to initialize wep: -2 [ 1.336028] b43: probe of ssb0:0 failed with error -2 [ 1.336040] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 1.485016] usbcore: registered new interface driver usbfs [ 1.485049] usbcore: registered new interface driver hub [ 1.485082] usbcore: registered new device driver usb [ 1.488693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.488734] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.488828] r8169 0000:07:00.0: setting latency timer to 64 [ 1.489023] r8169 0000:07:00.0: irq 28 for MSI/MSI-X [ 1.489689] eth0: RTL8168c/8111c at 0xf7f22000, 00:21:70:91:c2:cb, XID 1c4000c0 IRQ 28 [ 1.501214] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.501302] ACPI: Lid Switch [LID0] [ 1.501360] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.501366] ACPI: Power Button [PWRB] [ 1.501418] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 1.501423] ACPI: Sleep Button [SLPB] [ 1.501497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.501502] ACPI: Power Button [PWRF] [ 1.503381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.503409] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.503425] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.503429] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.504484] SCSI subsystem initialized [ 1.515354] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.515385] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.517225] sdhci: Secure Digital Host Controller Interface driver [ 1.517227] sdhci: Copyright(c) Pierre Ossman [ 1.518432] sdhci-pci 0000:08:05.2: SDHCI controller found [1217:7120] (rev 2) [ 1.518456] sdhci-pci 0000:08:05.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.518476] mmc0: Unknown controller version (2). You may experience problems. [ 1.518593] Registered led device: mmc0:: [ 1.518626] mmc0: SDHCI controller on PCI [0000:08:05.2] using DMA [ 1.519282] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.519622] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800 [ 1.525300] firewire_ohci 0000:08:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.525357] Uniform Multi-Platform E-IDE driver [ 1.529700] Linux agpgart interface v0.103 [ 1.534068] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.534098] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.534101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.534104] usb usb1: Product: EHCI Host Controller [ 1.534106] usb usb1: Manufacturer: Linux 2.6.32-3-686 ehci_hcd [ 1.534109] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.534203] usb usb1: configuration #1 chosen from 1 choice [ 1.534237] hub 1-0:1.0: USB hub found [ 1.534247] hub 1-0:1.0: 4 ports detected [ 1.534323] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.534352] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.534356] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.534368] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.534400] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.538294] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.542708] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504c00 [ 1.559357] [drm] Initialized drm 1.1.0 20060810 [ 1.560059] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.560083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.560086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.560089] usb usb2: Product: EHCI Host Controller [ 1.560092] usb usb2: Manufacturer: Linux 2.6.32-3-686 ehci_hcd [ 1.560094] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.560224] usb usb2: configuration #1 chosen from 1 choice [ 1.560292] hub 2-0:1.0: USB hub found [ 1.560302] hub 2-0:1.0: 6 ports detected [ 1.579480] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.580204] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 1.582164] uhci_hcd: USB Universal Host Controller Interface driver [ 1.585468] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.585504] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.585512] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.585516] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.585528] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.585571] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.585611] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.585614] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.585617] usb usb3: Product: UHCI Host Controller [ 1.585619] usb usb3: Manufacturer: Linux 2.6.32-3-686 uhci_hcd [ 1.585622] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.585731] usb usb3: configuration #1 chosen from 1 choice [ 1.585798] hub 3-0:1.0: USB hub found [ 1.585806] hub 3-0:1.0: 2 ports detected [ 1.585865] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.585872] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.585875] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.585884] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.585922] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 1.585957] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.585960] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.585963] usb usb4: Product: UHCI Host Controller [ 1.585965] usb usb4: Manufacturer: Linux 2.6.32-3-686 uhci_hcd [ 1.585968] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.586071] usb usb4: configuration #1 chosen from 1 choice [ 1.586135] hub 4-0:1.0: USB hub found [ 1.586142] hub 4-0:1.0: 2 ports detected [ 1.586195] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.586201] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.586205] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.586213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.586243] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 1.586277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.586280] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.586282] usb usb5: Product: UHCI Host Controller [ 1.586285] usb usb5: Manufacturer: Linux 2.6.32-3-686 uhci_hcd [ 1.586287] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.586388] usb usb5: configuration #1 chosen from 1 choice [ 1.586452] hub 5-0:1.0: USB hub found [ 1.586459] hub 5-0:1.0: 2 ports detected [ 1.586510] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.586517] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.586521] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.586529] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.586566] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 1.586600] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.586603] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.586606] usb usb6: Product: UHCI Host Controller [ 1.586608] usb usb6: Manufacturer: Linux 2.6.32-3-686 uhci_hcd [ 1.586611] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.586715] usb usb6: configuration #1 chosen from 1 choice [ 1.586872] hub 6-0:1.0: USB hub found [ 1.586880] hub 6-0:1.0: 2 ports detected [ 1.586938] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.586946] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.586950] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.586959] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.586990] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 1.587027] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.587030] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587032] usb usb7: Product: UHCI Host Controller [ 1.587035] usb usb7: Manufacturer: Linux 2.6.32-3-686 uhci_hcd [ 1.587037] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.587153] usb usb7: configuration #1 chosen from 1 choice [ 1.587218] hub 7-0:1.0: USB hub found [ 1.587225] hub 7-0:1.0: 2 ports detected [ 1.589511] libata version 3.00 loaded. [ 1.600010] firewire_ohci: Added fw-ohci device 0000:08:05.0, OHCI version 1.10 [ 1.602543] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) [ 1.602559] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.602583] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.602590] ide0: BM-DMA at 0x1810-0x1817 [ 1.602598] ide1: BM-DMA at 0x1818-0x181f [ 1.602604] Probing IDE interface ide0... [ 2.096078] firewire_core: created device fw0: GUID 0000c0ffa000b000, S400 [ 2.336293] hda: TEAC DVD+/-RW DVW28SLC, ATAPI CD/DVD-ROM drive [ 2.672046] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.673799] hda: UDMA/33 mode selected [ 2.676695] Probing IDE interface ide1... [ 3.244051] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.256032] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.256110] ahci 0000:00:1f.2: version 3.0 [ 3.256127] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 3.256185] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 3.256254] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 3.256259] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 3.256265] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.257190] scsi0 : ahci [ 3.257287] scsi1 : ahci [ 3.257348] scsi2 : ahci [ 3.257486] ata1: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504100 irq 29 [ 3.257491] ata2: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504180 irq 29 [ 3.257495] ata3: SATA max UDMA/133 abar m2048@0xf8504000 port 0xf8504200 irq 29 [ 3.257538] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.257542] i915 0000:00:02.0: setting latency timer to 64 [ 3.264363] i915 0000:00:02.0: irq 30 for MSI/MSI-X [ 3.264371] [drm] set up 7M of stolen space [ 3.365752] integrated sync not supported [ 3.588022] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.590684] ACPI Warning for \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 3.590692] ata1.00: _GTF unexpected object type 0x1 [ 3.594209] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-11, max UDMA7 [ 3.594212] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.596934] ata1.00: _GTF unexpected object type 0x1 [ 3.600472] ata1.00: configured for UDMA/133 [ 3.616104] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HI HH10 PQ: 0 ANSI: 5 [ 3.684018] ata2: SATA link down (SStatus 0 SControl 300) [ 3.684039] ata3: SATA link down (SStatus 0 SControl 300) [ 3.707631] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.707675] sd 0:0:0:0: [sda] Write Protect is off [ 3.707678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.707700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.707829] sda: sda1 sda2 < sda5 [ 3.788991] integrated sync not supported [ 3.807437] sda6 > sda3 sda4 [ 3.808030] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.849404] [drm] TV-14: set mode NTSC 480i 0 [ 4.055489] [drm] LVDS-8: set mode 1280x800 1d [ 4.156446] Console: switching to colour frame buffer device 160x50 [ 4.161617] fb0: inteldrmfb frame buffer device [ 4.161619] registered panic notifier [ 4.181158] acpi device:07: registered as cooling_device0 [ 4.181448] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5 [ 4.181456] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.181484] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.190618] ide-cd driver 5.00 [ 4.193671] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2000kB Cache [ 4.193678] Uniform CD-ROM driver Revision: 3.20 [ 4.380777] PM: Starting manual resume from disk [ 4.380780] PM: Resume from partition 8:6 [ 4.380782] PM: Checking hibernation image. [ 4.381012] PM: Error -22 checking image file [ 4.381014] PM: Resume from disk failed. [ 4.399127] EXT3-fs: INFO: recovery required on readonly filesystem. [ 4.399130] EXT3-fs: write access will be enabled during recovery. [ 6.309844] kjournald starting. Commit interval 5 seconds [ 6.309861] EXT3-fs: sda5: orphan cleanup on readonly fs [ 6.309866] ext3_orphan_cleanup: deleting unreferenced inode 664059 [ 6.332953] EXT3-fs: sda5: 1 orphan inode deleted [ 6.332955] EXT3-fs: recovery complete. [ 6.337964] EXT3-fs: mounted filesystem with ordered data mode. [ 8.236971] udev: starting version 151 [ 9.102428] ACPI: WMI: Mapper loaded [ 9.283462] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.326838] ACPI: SSDT bf6d75eb 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 9.327362] ACPI: SSDT bf6d6f7c 005EA (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 9.335700] Monitor-Mwait will be used to enter C-1 state [ 9.335729] Monitor-Mwait will be used to enter C-2 state [ 9.335750] Monitor-Mwait will be used to enter C-3 state [ 9.335756] Marking TSC unstable due to TSC halts in idle [ 9.335860] processor LNXCPU:00: registered as cooling_device1 [ 9.336162] Switching to clocksource hpet [ 9.338131] ACPI: SSDT bf6d7823 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109) [ 9.338475] ACPI: SSDT bf6d7566 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109) [ 9.343789] processor LNXCPU:01: registered as cooling_device2 [ 9.897709] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.897715] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f] [ 9.897800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.898050] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 10.035879] ACPI: Battery Slot [BAT1] (battery present) [ 10.040910] ACPI: AC Adapter [ACAD] (on-line) [ 10.067960] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 [ 10.110275] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 11.081171] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 11.081205] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.161845] hda_codec: ALC268: BIOS auto-probing. [ 11.162233] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 12.165018] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x001f000d [ 14.137324] Adding 3678844k swap on /dev/sda6. Priority:-1 extents:1 across:3678844k [ 14.594017] EXT3 FS on sda5, internal journal [ 15.068919] fuse init (API version 7.13) [ 15.749344] loop: module loaded [ 16.794148] r8169: eth0: link up [ 16.794164] r8169: eth0: link up [ 17.165184] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10 [ 18.671831] apm: BIOS not found. [ 23.163287] lp: driver loaded but no devices found [ 23.222697] ppdev: user-space parallel port driver [ 26.422792] integrated sync not supported [ 26.486344] [drm] TV-14: set mode NTSC 480i 0 [ 26.666137] [drm] TV-14: set mode NTSC 480i 0 [ 26.901843] integrated sync not supported [ 26.963538] [drm] TV-14: set mode NTSC 480i 0 [ 27.143330] [drm] TV-14: set mode NTSC 480i 0 [ 27.700124] eth0: no IPv6 routers present [ 5680.547627] integrated sync not supported [ 5680.608481] [drm] TV-14: set mode NTSC 480i 0 [ 5680.788523] [drm] TV-14: set mode NTSC 480i 0 [ 5698.013399] cfg80211: Using static regulatory domain info [ 5698.013405] cfg80211: Regulatory domain: US [ 5698.013410] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5698.013417] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 5698.013424] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5698.013431] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5698.013438] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5698.013444] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 5698.013451] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 5698.013959] cfg80211: Calling CRDA for country: US [ 5698.125267] b43-pci-bridge 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5698.125302] b43-pci-bridge 0000:06:00.0: setting latency timer to 64 [ 5698.192400] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0 [ 5698.216820] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 5698.338414] phy0: Selected rate control algorithm 'minstrel' [ 5698.339092] Registered led device: b43-phy0::tx [ 5698.339112] Registered led device: b43-phy0::rx [ 5698.339131] Registered led device: b43-phy0::radio [ 5698.339216] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ] [ 5698.401337] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 5698.440339] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw [ 5698.451748] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw [ 5698.604288] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 5698.894860] b43-phy0: Radio hardware status changed to DISABLED [ 5698.904396] b43-phy0: Radio turned on by software [ 5698.904405] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on. [ 5698.905256] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5709.020393] b43-phy0: Radio hardware status changed to ENABLED [ 5709.256283] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 5714.773117] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5715.064294] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 5720.589109] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5723.432944] wlan0: direct probe to AP 00:23:69:2f:58:57 (try 1) [ 5723.435796] wlan0: direct probe responded [ 5723.435806] wlan0: authenticate with AP 00:23:69:2f:58:57 (try 1) [ 5723.437700] wlan0: authenticated [ 5723.437739] wlan0: associate with AP 00:23:69:2f:58:57 (try 1) [ 5723.440477] wlan0: RX AssocResp from 00:23:69:2f:58:57 (capab=0x411 status=0 aid=1) [ 5723.440485] wlan0: associated [ 5723.441970] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5733.772040] wlan0: no IPv6 routers present [ 5872.327028] r8169: eth0: link down [ 6182.989083] CE: hpet increasing min_delta_ns to 22500 nsec [ 9820.914296] b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 9820.914313] b43-phy0: Controller RESET (DMA error) ... [ 9821.140330] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 9826.645227] b43-phy0: Controller restarted [ 9826.645491] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 9826.645503] b43-phy0: Controller RESET (DMA error) ... [ 9826.872360] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 9832.389098] b43-phy0: Controller restarted [ 9832.389357] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 9832.389370] b43-phy0: Controller RESET (DMA error) ... [ 9832.616276] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 9838.141222] b43-phy0: Controller restarted [ 9838.141484] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 9838.141497] b43-phy0: Controller RESET (DMA error) ... [ 9838.368299] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 9843.897263] b43-phy0: Controller restarted [ 9843.897511] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 [ 9843.897524] b43-phy0: Controller RESET (DMA error) ... [ 9844.124261] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) (...)