From: Roel Kluin <roel.kluin@gmail.com>
To: Daniel Mack <daniel@caiaq.de>
Cc: "John W. Linville" <linville@tuxdriver.com>,
libertas-dev@lists.infradead.org, linux-wireless@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: Libertas: Association request to the driver failed
Date: Sat, 08 Aug 2009 16:24:54 +0200 [thread overview]
Message-ID: <4A7D8AB6.9030707@gmail.com> (raw)
In-Reply-To: <20090808123512.GZ19257@buzzloop.caiaq.de>
>>> Since a recent merge of the wireless tree to Linus' master, my SDIO
>>> connected libertas module fails to connect to our WLAN.
>>>
>>> 'iwlist scanning' works fine, but wpa_supplicant keeps on spitting out
>>> the following message:
>>>
>>> CTRL-EVENT-SCAN-RESULTS
>>> Trying to associate with 00:04:0e:4b:c7:b3 (SSID='caiaq' freq=2437 MHz)
>>> Association request to the driver failed
>> In this case, there
>> is only this on libertas patch in the range you mention:
>
> I was wrong with the range I provided. The change came in after -rc5,
> and I found 57921c31 ("libertas: Read buffer overflow") to be the
> culprit. Reverting it brings my libertas device back to life. I copied
> the author.
>
> Thanks,
> Daniel
Ah, I think I made an error, I think tmp is too small and should be
u8 tmp[*rates_size * ARRAY_SIZE(lbs_bg_rates) - 1];
Can we revert and does the patch below work?
Sorry and thanks for testing,
Roel
commit 57921c312e8cef72ba35a4cfe870b376da0b1b87
Author: Roel Kluin <roel.kluin@gmail.com>
Date: Tue Jul 28 12:05:00 2009 +0200
libertas: Read buffer overflow
Several arrays were read before checking whether the index was within
bounds. ARRAY_SIZE() should be used to determine the size of arrays.
rates->rates has an arraysize of 1, so calling get_common_rates()
with a rates_size of MAX_RATES (14) was causing reads out of bounds.
tmp_size can increment at most to (ARRAY_SIZE(lbs_bg_rates) - 1) *
(*rates_size - 1), so that should be the number of elements of tmp[].
A goto can be eliminated: ret was already set upon its declaration.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index b9b3741..d699737 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -1,6 +1,7 @@
/* Copyright (C) 2006, Red Hat, Inc. */
#include <linux/types.h>
+#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
#include <linux/if_arp.h>
@@ -43,21 +44,21 @@ static int get_common_rates(struct lbs_private *priv,
u16 *rates_size)
{
u8 *card_rates = lbs_bg_rates;
- size_t num_card_rates = sizeof(lbs_bg_rates);
int ret = 0, i, j;
- u8 tmp[30];
+ u8 tmp[*rates_size * ARRAY_SIZE(lbs_bg_rates) - 1];
size_t tmp_size = 0;
/* For each rate in card_rates that exists in rate1, copy to tmp */
- for (i = 0; card_rates[i] && (i < num_card_rates); i++) {
- for (j = 0; rates[j] && (j < *rates_size); j++) {
+ for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && card_rates[i]; i++) {
+ for (j = 0; j < *rates_size && rates[j]; j++) {
if (rates[j] == card_rates[i])
tmp[tmp_size++] = card_rates[i];
}
}
lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size);
- lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates);
+ lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates,
+ ARRAY_SIZE(lbs_bg_rates));
lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
@@ -69,10 +70,7 @@ static int get_common_rates(struct lbs_private *priv,
lbs_pr_alert("Previously set fixed data rate %#x isn't "
"compatible with the network.\n", priv->cur_rate);
ret = -1;
- goto done;
}
- ret = 0;
-
done:
memset(rates, 0, *rates_size);
*rates_size = min_t(int, tmp_size, *rates_size);
@@ -322,7 +320,7 @@ static int lbs_associate(struct lbs_private *priv,
rates = (struct mrvl_ie_rates_param_set *) pos;
rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
memcpy(&rates->rates, &bss->rates, MAX_RATES);
- tmplen = MAX_RATES;
+ tmplen = min_t(u16, ARRAY_SIZE(rates->rates), MAX_RATES);
if (get_common_rates(priv, rates->rates, &tmplen)) {
ret = -1;
goto done;
@@ -598,7 +596,7 @@ static int lbs_adhoc_join(struct lbs_private *priv,
/* Copy Data rates from the rates recorded in scan response */
memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates));
- ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES);
+ ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), MAX_RATES);
memcpy(cmd.bss.rates, bss->rates, ratesize);
if (get_common_rates(priv, cmd.bss.rates, &ratesize)) {
lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n");
next prev parent reply other threads:[~2009-08-08 14:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-07 19:11 Libertas: Association request to the driver failed Daniel Mack
2009-08-07 19:36 ` John W. Linville
2009-08-07 20:50 ` Marek Vasut
2009-08-08 12:35 ` Daniel Mack
2009-08-08 14:24 ` Roel Kluin [this message]
2009-08-09 9:23 ` Roel Kluin
2009-08-09 10:24 ` Daniel Mack
2009-08-09 11:11 ` Roel Kluin
2009-08-09 11:10 ` Michael Buesch
2009-08-09 19:13 ` Cyrill Gorcunov
2009-08-10 10:37 ` Roel Kluin
2009-08-10 14:04 ` Cyrill Gorcunov
2009-08-10 17:47 ` Daniel Mack
2009-08-12 8:17 ` Jonathan Cameron
2009-08-12 8:47 ` Jonathan Cameron
2009-08-12 16:16 ` Dan Williams
2009-08-10 17:59 ` John W. Linville
2009-08-11 7:02 ` Roel Kluin
2009-08-11 18:24 ` John W. Linville
2009-08-12 16:15 ` Dan Williams
2009-08-12 17:34 ` Dan Williams
2009-08-07 21:21 ` Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A7D8AB6.9030707@gmail.com \
--to=roel.kluin@gmail.com \
--cc=daniel@caiaq.de \
--cc=libertas-dev@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).