From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-fx0-f215.google.com ([209.85.220.215]:61052 "EHLO mail-fx0-f215.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750946AbZHPN0i (ORCPT ); Sun, 16 Aug 2009 09:26:38 -0400 Received: by fxm11 with SMTP id 11so1868562fxm.39 for ; Sun, 16 Aug 2009 06:26:39 -0700 (PDT) Message-ID: <4A88090D.3070107@gmail.com> Date: Sun, 16 Aug 2009 15:26:37 +0200 From: =?UTF-8?B?R8OhYm9yIFN0ZWZhbmlr?= MIME-Version: 1.0 To: John Linville , Michael Buesch , Larry Finger CC: Mark Huijgen , Broadcom Wireless , linux-wireless Subject: [PATCH] b43: LP-PHY: Update code for spec fixes, and fix a few typos Content-Type: text/plain; charset=UTF-8; format=flowed Sender: linux-wireless-owner@vger.kernel.org List-ID: A few typos have been discovered both in the specs in and our code. This patch fixes them. Also use lpphy_op_switch_channel consistently, and make all callers print its return value for easier debugging. Signed-off-by: Gábor Stefanik --- I think using a forward declaration is justified in this case; as avoiding the forward decl would require moving around huge blocks of code, completely breaking any logical ordering. drivers/net/wireless/b43/phy_lp.c | 51 ++++++++++++++++++++++++------------ 1 files changed, 34 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index e4a040b..a51da6e 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -552,7 +552,7 @@ static void lpphy_2062_init(struct b43_wldev *dev) B43_WARN_ON(!(bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)); B43_WARN_ON(crystalfreq == 0); - if (crystalfreq >= 30000000) { + if (crystalfreq <= 30000000) { lpphy->pdiv = 1; b43_radio_mask(dev, B2062_S_RFPLL_CTL1, 0xFFFB); } else { @@ -560,14 +560,16 @@ static void lpphy_2062_init(struct b43_wldev *dev) b43_radio_set(dev, B2062_S_RFPLL_CTL1, 0x4); } - tmp = (800000000 * lpphy->pdiv + crystalfreq) / - (32000000 * lpphy->pdiv); - tmp = (tmp - 1) & 0xFF; + tmp = (((800000000 * lpphy->pdiv + crystalfreq) / + (2 * crystalfreq)) - 8) & 0xFF; + b43_radio_write(dev, B2062_S_RFPLL_CTL7, tmp); + + tmp = (((100 * crystalfreq + 16000000 * lpphy->pdiv) / + (32000000 * lpphy->pdiv)) - 1) & 0xFF; b43_radio_write(dev, B2062_S_RFPLL_CTL18, tmp); - tmp = (2 * crystalfreq + 1000000 * lpphy->pdiv) / - (2000000 * lpphy->pdiv); - tmp = ((tmp & 0xFF) - 1) & 0xFFFF; + tmp = (((2 * crystalfreq + 1000000 * lpphy->pdiv) / + (2000000 * lpphy->pdiv)) - 1) & 0xFF; b43_radio_write(dev, B2062_S_RFPLL_CTL19, tmp); ref = (1000 * lpphy->pdiv + 2 * crystalfreq) / (2000 * lpphy->pdiv); @@ -671,7 +673,7 @@ static void lpphy_radio_init(struct b43_wldev *dev) b43_phy_mask(dev, B43_LPPHY_FOURWIRE_CTL, 0xFFFD); udelay(1); - if (dev->phy.rev < 2) { + if (dev->phy.radio_ver == 0x2062) { lpphy_2062_init(dev); } else { lpphy_2063_init(dev); @@ -688,11 +690,18 @@ struct lpphy_iq_est { u32 iq_prod, i_pwr, q_pwr; }; static void lpphy_set_rc_cap(struct b43_wldev *dev) { - u8 rc_cap = dev->phy.lp->rc_cap; + struct b43_phy_lp *lpphy = dev->phy.lp; - b43_radio_write(dev, B2062_N_RXBB_CALIB2, max_t(u8, rc_cap-4, 0x80)); - b43_radio_write(dev, B2062_N_TX_CTL_A, ((rc_cap & 0x1F) >> 1) | 0x80); - b43_radio_write(dev, B2062_S_RXG_CNT16, ((rc_cap & 0x1F) >> 2) | 0x80); + u8 rc_cap = (lpphy->rc_cap & 0x1F) >> 1; + + if (dev->phy.rev == 1) //FIXME check channel 14! + rc_cap = max_t(u8, rc_cap + 5, 15); + + b43_radio_write(dev, B2062_N_RXBB_CALIB2, + max_t(u8, lpphy->rc_cap - 4, 0x80)); + b43_radio_write(dev, B2062_N_TX_CTL_A, rc_cap | 0x80); + b43_radio_write(dev, B2062_S_RXG_CNT16, + ((lpphy->rc_cap & 0x1F) >> 2) | 0x80); } static u8 lpphy_get_bb_mult(struct b43_wldev *dev) @@ -1101,6 +1110,9 @@ static void lpphy_set_tx_power_control(struct b43_wldev *dev, lpphy_write_tx_pctl_mode_to_hardware(dev); } +static int b43_lpphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel); + static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev) { struct b43_phy_lp *lpphy = dev->phy.lp; @@ -1118,11 +1130,16 @@ static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev) old_rf2_ovr, old_rf2_ovrval, old_phy_ctl; enum b43_lpphy_txpctl_mode old_txpctl; u32 normal_pwr, ideal_pwr, mean_sq_pwr, tmp = 0, mean_sq_pwr_min = 0; - int loopback, i, j, inner_sum; + int loopback, i, j, inner_sum, err; memset(&iq_est, 0, sizeof(iq_est)); - b43_switch_channel(dev, 7); + err = b43_lpphy_op_switch_channel(dev, 7); + if (err) { + b43dbg(dev->wl, + "RC calib: Failed to switch to channel 7, error = %d", + err); + } old_txg_ovr = (b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) >> 6) & 1; old_bbmult = lpphy_get_bb_mult(dev); if (old_txg_ovr) @@ -1881,14 +1898,14 @@ static int lpphy_b2062_tune(struct b43_wldev *dev, { struct b43_phy_lp *lpphy = dev->phy.lp; struct ssb_bus *bus = dev->dev->bus; - static const struct b206x_channel *chandata = NULL; + const struct b206x_channel *chandata = NULL; u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000; u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9; int i, err = 0; - for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) { + for (i = 0; i < ARRAY_SIZE(b2062_chantbl); i++) { if (b2063_chantbl[i].channel == channel) { - chandata = &b2063_chantbl[i]; + chandata = &b2062_chantbl[i]; break; } } -- 1.6.2.4